This commit fixes a few things:
* Instead of checking for CPU support of the "xsave" extension, we
need to check for OS support of XGETBV instructions via the
"osxsave" flag.
* We must check that additional XCR0 bits are set to be sure the
ZMM registers are fully enabled.
* We should use the recommended ordering of steps. Specifically,
we need to check that the ZMM registers are enabled prior to
checking for AVX-512 via CPUID.
In passing, split this code into separate functions to improve
readability.
Reported-by: Andrew Kane
Reviewed-by: Akash Shankaran, Raghuveer Devulapalli
Discussion: https://postgr.es/m/20240418024459.GA3385227%40nathanxps13
Commit 792752af4e added infrastructure for using AVX-512 intrinsic
functions, and this commit uses that infrastructure to optimize
visibilitymap_count(). Specificially, a new pg_popcount_masked()
function is introduced that applies a bitmask to every byte in the
buffer prior to calculating the population count, which is used to
filter out the all-visible or all-frozen bits as needed. Platforms
without AVX-512 support should also see a nice speedup due to the
reduced number of calls to a function pointer.
Co-authored-by: Ants Aasma
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
Presently, pg_popcount() processes data in 32-bit or 64-bit chunks
when possible. Newer hardware that supports AVX-512 instructions
can use 512-bit chunks, which provides a nice speedup, especially
for larger buffers. This commit introduces the infrastructure
required to detect compiler and CPU support for the required
AVX-512 intrinsic functions, and it adds a new pg_popcount()
implementation that uses these functions. If CPU support for this
optimized implementation is detected at runtime, a function pointer
is updated so that it is used by subsequent calls to pg_popcount().
Most of the existing in-tree calls to pg_popcount() should benefit
from these instructions, and calls with smaller buffers should at
least not regress compared to v16. The new infrastructure
introduced by this commit can also be used to optimize
visibilitymap_count(), but that is left for a follow-up commit.
Co-authored-by: Paul Amonson, Ants Aasma
Reviewed-by: Matthias van de Meent, Tom Lane, Noah Misch, Akash Shankaran, Alvaro Herrera, Andres Freund, David Rowley
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
If there aren't many bytes to process, the function call overhead
of the optimized implementation isn't worth taking, so instead we
inline a loop that consults pg_number_of_ones in that case. If
there are many bytes to process, we accept the function call
overhead because the optimized versions are likely to be faster.
The threshold at which we use the optimized implementation is set
to the smallest amount of data required to use special popcount
instructions.
Reviewed-by: Alvaro Herrera, Tom Lane
Discussion: https://postgr.es/m/20240402155301.GA2750455%40nathanxps13
On some systems, calls to pg_popcount{32,64} are indirected through
a function pointer. This commit converts pg_popcount() to a
function pointer on those systems so that we can inline the
appropriate pg_popcount{32,64} implementations into each of the
pg_popcount() implementations. Since pg_popcount() may call
pg_popcount{32,64} several times, this can significantly improve
its performance.
Suggested-by: David Rowley
Reviewed-by: David Rowley
Discussion: https://postgr.es/m/CAApHDvrb7MJRB6JuKLDEY2x_LKdFHwVbogpjZBCX547i5%2BrXOQ%40mail.gmail.com
Most callers of strerror() are removed from the backend code. The
remaining callers require special handling with a saved errno from a
previous system call. The frontend code still needs strerror() where
error states need to be handled outside of fprintf.
Note that pg_regress is not changed to use %m as the TAP output may
clobber errno, since those functions call fprintf() and friends before
evaluating the format string.
Support for %m in src/port/snprintf.c has been added in d6c55de1f9,
hence all the stable branches currently supported include it.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf13jhuw.fsf@wibble.ilmari.org
When calling the Windows file I/O APIs there is an implicit conversion
from size_t to DWORD, which could overflow. Clamp the size at 1GB to
avoid that.
Not a really a live bug as we don't expect anything in PostgreSQL to
call with such large values.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1672202.1703441340%40sss.pgh.pa.us
There isn't a lot of user demand for AIX support, we have a bunch of
hacks to work around AIX-specific compiler bugs and idiosyncrasies,
and no one has stepped up to the plate to properly maintain it.
Remove support for AIX to get rid of that maintenance overhead. It's
still supported for stable versions.
The acute issue that triggered this decision was that after commit
8af2565248, the AIX buildfarm members have been hitting this
assertion:
TRAP: failed Assert("(uintptr_t) buffer == TYPEALIGN(PG_IO_ALIGN_SIZE, buffer)"), File: "md.c", Line: 472, PID: 2949728
Apperently the "pg_attribute_aligned(a)" attribute doesn't work on AIX
for values larger than PG_IO_ALIGN_SIZE, for a static const variable.
That could be worked around, but we decided to just drop the AIX support
instead.
Discussion: https://www.postgresql.org/message-id/20240224172345.32@rfd.leadboat.com
Reviewed-by: Andres Freund, Noah Misch, Thomas Munro
Presently, we rely on each individual signal handler to save the
initial value of errno and then restore it before returning if
needed. This is easily forgotten and, if missed, often goes
undetected for a long time.
In commit 3b00fdba9f, we introduced a wrapper signal handler
function that checks whether MyProcPid matches getpid(). This
commit moves the aforementioned errno restoration code from the
individual signal handlers to the new wrapper handler so that we no
longer need to worry about missing it.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
In commit 97550c0711, we added a similar check to the SIGTERM
handler for the startup process. This commit adds this check to
backend signal handlers installed with pqsignal(). This is done by
using a wrapper function that performs the check before calling the
actual handler.
The hope is that this will offer more general protection against
child processes of Postgres backends inadvertently modifying shared
memory due to inherited signal handlers. Another potential
follow-up improvement is to use this wrapper handler function to
restore errno instead of relying on each individual handler
function to do so.
This commit makes the changes in commit 97550c0711 obsolete but
leaves reverting it for a follow-up commit.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
Commit 5579388d removed code that supplied a fallback implementation of
getaddrinfo(), which was dead code on modern systems. One tiny piece of
the removed code was still doing something useful on Windows, though:
that OS's own gai_strerror()/gai_strerrorA() function returns a pointer
to a static buffer that it overwrites each time, so it's not
thread-safe. In rare circumstances, a multi-threaded client program
could get an incorrect or corrupted error message.
Restore the replacement gai_strerror() function, though now that it's
only for Windows we can put it into a win32-specific file and cut it
down to the errors that Windows documents. The error messages here are
taken from FreeBSD, because Windows' own messages seemed too verbose.
Back-patch to 16.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGKz%2BF9d2PTiXwfYV7qJw%2BWg2jzACgSDgPizUw7UG%3Di58A%40mail.gmail.com
Fix pthread-win32.h and pthread-win32.c to provide a more complete
emulation of POSIX pthread mutexes: define PTHREAD_MUTEX_INITIALIZER
and make sure that pthread_mutex_lock() can operate on a mutex
object that's been initialized that way. Then we don't need the
duplicative platform-specific logic in default_threadlock() and
pgtls_init(), which we'd otherwise need yet a third copy of for
an upcoming bug fix.
Also, since default_threadlock() supposes that pthread_mutex_lock()
cannot fail, try to ensure that that's actually true, by getting
rid of the malloc call that was formerly involved in initializing
an emulated mutex. We can define an extra state for the spinlock
field instead.
Also, replace the similar code in ecpglib/misc.c with this version.
While ecpglib's version at least had a POSIX-compliant API, it
also had the potential of failing during mutex init (but here,
because of CreateMutex failure rather than malloc failure). Since
all of misc.c's callers ignore failures, it seems like a wise idea
to avoid failures here too.
A further improvement in this area could be to unify libpq's and
ecpglib's implementations into a src/port/pthread-win32.c file.
But that doesn't seem like a bug fix, so I'll desist for now.
In preparation for the aforementioned bug fix, back-patch to all
supported branches.
Discussion: https://postgr.es/m/264860.1707163416@sss.pgh.pa.us
This commit removes all the scripts located in src/tools/msvc/ to build
PostgreSQL with Visual Studio on Windows, meson becoming the recommended
way to achieve that. The scripts held some information that is still
relevant with meson, information kept and moved to better locations.
Comments that referred directly to the scripts are removed.
All the documentation still relevant that was in install-windows.sgml
has been moved to installation.sgml under a new subsection for Visual.
All the content specific to the scripts is removed. Some adjustments
for the documentation are planned in a follow-up set of changes.
Author: Michael Paquier
Reviewed-by: Peter Eisentraut, Andres Freund
Discussion: https://postgr.es/m/ZQzp_VMJcerM1Cs_@paquier.xyz
For the trivial case of iovcnt == 1, kernels are measurably slower at
dealing with the more complex arguments of preadv/pwritev than the
equivalent plain old pread/pwrite. The overheads are worth it for
iovcnt > 1, but for 1 let's just redirect to the cheaper calls. While
we could leave it to callers to worry about that, we already have to
have our own pg_ wrappers for portability reasons so it seems
reasonable to centralize this knowledge there (thanks to Heikki for this
suggestion). Try to avoid function call overheads by making them
inlinable, which might also allow the compiler to avoid the branch in
some cases. For systems that don't have preadv and pwritev (currently:
Windows and [closed] Solaris), we might as well pull the replacement
functions up into the static inline functions too.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA+hUKGJkOiOCa+mag4BF+zHo7qo=o9CFheB8=g6uT5TUm2gkvA@mail.gmail.com
Explain where pqsignal() came from, what problem it originally solved
without assuming the reader is familiar with historical Unixen, why we
still need it, what it does for us now, and the key differences in
frontend code on Windows.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKG%2BRst1h3uo%2BXRgdRVnWHBa4mmj5gFbmCzZr73s-Fh_5JA%40mail.gmail.com
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
The meson build scripts attempt to find files left over from configure
and fail, mentioning that "make maintainer-clean" should be run to remove
these. This seems to have been done for files generated from configure.
pg_config_paths.h is generated during the actual make build, so seems to
have been missed. This would result in compilation using the wrong
pg_config_paths.h file.
Here we just add this file to generated_sources_ac so that meson errors
out if pg_config_paths.h exists.
Likely this wasn't noticed before because make maintainer-clean will
remove pg_config_paths.h, however, people using the MSVC build scripts
are more likely to run into issues and they have to manually remove
these files and pg_config_paths.h wasn't listed as a conflicting file to
remove in the meson log.
Backpatch-through: 16, where meson support was added
Discussion: https://postgr.es/m/CAApHDvqjYOxZfmLKAOWKFEE7LOr9_E6UA6YNmx9r8nxStcS3gg@mail.gmail.com
As with the Intel and Arm CRC instructions, compiler intrinsics for
them must be supported by the compiler. In contrast, no runtime check
is needed. Aligned memory access is faster, so use the Arm coding as
a model.
YANG Xudong
Discussion: https://postgr.es/m/b522a0c5-e3b2-99cc-6387-58134fb88cbe%40ymatrix.cn
Unlike the other implementations of getopt_long() I could find, the
in-tree implementation does not reorder non-options to the end of
argv. Instead, it returns -1 as soon as the first non-option is
found, even if there are other options listed afterwards. By
moving non-options to the end of argv, getopt_long() can parse all
specified options and return -1 when only non-options remain.
This quirk is periodically missed by hackers (e.g., 869aa40a27,
ffd398021c, and d9ddc50baf). This commit introduces the
aforementioned non-option reordering behavior to the in-tree
getopt_long() implementation.
Special thanks to Noah Misch for his help verifying behavior on
AIX.
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20230609232257.GA121461%40nathanxps13
Historically this module dealt with thread-safety of system interfaces,
but now all that's left is wrapper code for user name and home directory
lookup. Arguably the Windows variants of this logic could be moved in
here too, to justify its presence under port. For now, just tidy up
some obsolete references to multi-threading, and give the file a
meaningful name.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
This fixes many spelling mistakes in comments, but a few references to
invalid parameter names, function names and option names too in comments
and also some in string constants
Also, fix an #undef that was undefining the incorrect definition
Author: Alexander Lakhin
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/d5f68d19-c0fc-91a9-118d-7c6a5a3f5fad@gmail.com
Calling fseek() or ftello() on a handle to a non-seeking device such as
a pipe or a communications device is not supported. Unfortunately,
MSVC's flavor of these routines, _fseeki64() and _ftelli64(), do not
return an error when given a pipe as handle. Some of the logic of
pg_dump and restore relies on these routines to check if a handle is
seekable, causing failures when passing the contents of pg_dump to
pg_restore through a pipe, for example.
This commit introduces wrappers for fseeko() and ftello() on MSVC so as
any callers are able to properly detect the cases of non-seekable
handles. This relies mainly on GetFileType(), sharing a bit of code
with the MSVC port for fstat(). The code in charge of getting a file
type is refactored into a new file called win32common.c, shared by
win32stat.c and the new win32fseek.c. It includes the MSVC ports for
fseeko() and ftello().
Like 765f5df, this is backpatched down to 14, where the fstat()
implementation for MSVC is able to understand about files larger than
4GB in size. Using a TAP test for that is proving to be tricky as
IPC::Run handles the pipes by itself, still I have been able to check
the fix manually.
Reported-by: Daniel Watzinger
Author: Juan José Santamaría Flecha, Michael Paquier
Discussion: https://postgr.es/m/CAC+AXB26a4EmxM2suXxPpJaGrqAdxracd7hskLg-zxtPB50h7A@mail.gmail.com
Backpatch-through: 14
The previous coding based on select() had commentary about historical
portability concerns. Use POSIX nanosleep() instead.
This has independently been suggested a couple of times before, but
never managed to stick. Since recent and proposed work removes other
uses of select(), and associated code and comments relating to its
non-portable interaction with signals, it seems like a good time to tidy
up this case, too.
Also modernize the explanation of why WaitLatch() is a better way to
wait.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Suggested-by: Paul Guo <paulguo@gmail.com>
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAAKRu_b-q0hXCBUCAATh0Z4Zi6UkiC0k2DFgoD3nC-r3SkR3tg%40mail.gmail.com
Discussion: https://postgr.es/m/CABQrizfxpBLZT5mZeE0js5oCh1tqEWvcGF3vMRCv5P-RwUY5dQ@mail.gmail.com
Discussion: https://postgr.es/m/4902.1552349020@sss.pgh.pa.us
There are still some systems that use traditional tick-based sleep
timing, but many including Linux, FreeBSD and macOS started using high
resolution timer hardware more directly a decade or two ago. Update our
comment about that. Also highlight that Windows is like the older
Unixen in that respect.
Author: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BogAon8_V223Ldv6taPR2uKH3X_UJ_A7LJAf3-VRARPA%40mail.gmail.com
The current implementation of _pgfstat64() is ineffective in detecting a
terminal handle or an anonymous named pipe. This commit improves our
port of fstat() to detect more efficiently such cases by relying on
GetFileType(), and returning more correct data when the type found is
either a FILE_TYPE_PIPE (_S_IFIFO) or a FILE_TYPE_CHAR (_S_IFCHR).
This is part of a more global fix to address failures when feeding the
output generated by pg_dump to pg_restore through a pipe, for example,
but not all of it. We are also going to need to do something about
fseek() and ftello() which are not reliable on WIN32 for the same cases
where fstat() was incorrect. Fixing fstat() is independent of the rest,
though, which is why both fixes are handled separately, and this is the
first part of it.
Reported-by: Daniel Watzinger
Author: Daniel Watzinger, Juan José Santamaría Flecha
Discussion: https://postgr.es/m/b1448cd7-871e-20e3-8398-895e2d1d3bf9@gmail.com
Backpatch-through: 14
There likely are further issues, but as evidenced by the CI task proposed by
Justin in the referenced thread, this suffices to build and run basic tests in
cygwin (some fixes for the test infrastructure are needed, but that's
independent of the meson aspect).
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/20221021034040.GT16921@telsasoft.com
Until now we emitted the cflags to build the CRC objects into architecture
specific variables. That doesn't make a whole lot of sense to me - we're never
going to target x86 and arm at the same time, so they don't need to be
separate variables.
It might be better to instead continue to have CFLAGS_SSE42 /
CFLAGS_ARMV8_CRC32C be computed by PGAC_ARMV8_CRC32C_INTRINSICS /
PGAC_SSE42_CRC32_INTRINSICS and then set CFLAGS_CRC based on those. But it
seems unlikely that we'd need other sets of CRC specific flags for those two
architectures at the same time.
This simplifies the upcoming meson PGXS compatibility.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Commit f357233c assumed that it was OK to return ENOENT directly if
lstat() failed that way. If we got STATUS_DELETE_PENDING while trying
to unlink a file that we had already unlinked successfully once before
but someone else still had open (on a kernel version that has "pending"
unlinks by default), then we would no longer reach the retry loop in
pgunlink(). That loop claims to be only for handling sharing violations
(a different phenomenon), but the errno is the same.
Restore that behavior with an explicit check, to see if it fixes the
occasional 'directory not empty' failures seen in the pg_upgrade tests
on CI. Further improvements are possible with proposed upgrades to
modern Windows APIs that would replace this convoluted code.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220920013122.GA31833%40telsasoft.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Commit c5cb8f3b supposed that we'd only ever have to follow one junction
point in stat(), because we don't construct longer chains of them ourselves.
When examining a parent directory supplied by the user, we should really be
able to cope with longer chains, just in case someone has their system
set up that way. Choose an arbitrary cap of 8, to match the minimum
acceptable value of SYMLOOP_MAX in POSIX.
Previously I'd avoided reporting ELOOP thinking Windows didn't have it,
but it turns out that it does, so we can use the proper error number.
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/CA%2BhUKGJ7JDGWYFt9%3D-TyJiRRy5q9TtPfqeKkneWDr1XPU1%2Biqw%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
Since commit c5cb8f3b taught stat() to follow symlinks, and since initdb
uses pg_mkdir_p(), and that examines parent directories, our humble
readlink() implementation can now be exposed to junction points not of
PostgreSQL origin. Those might be corrupted by our naive path mangling,
which doesn't really understand NT paths in general.
Simply decline to transform paths that don't look like a drive absolute
path. That means that readlink() returns the NT path directly when
checking a parent directory of PGDATA that happen to point to a drive
using "rooted" format. That works for the purposes of our stat()
emulation.
Reported-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/4590c37927d7b8ee84f9855d83229018%40postgrespro.ru
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
When using junction points to emulate symlinks on Windows, one edge case
was not handled correctly by commit c5cb8f3b: if a junction point is
broken (pointing to a non-existent path), we'd report ENOENT. This
doesn't break any known use case, but was noticed while developing a
test suite for these functions and is fixed here for completeness.
Also add translation ERROR_CANT_RESOLVE_FILENAME -> ENOENT, as that is
one of the errors Windows can report for some kinds of broken paths.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
snprintf.c has always fallen back on libc's *printf implementation
when printing pointers (%p) and floats. When this code originated,
we were still supporting some platforms that lacked native snprintf,
so we used sprintf for that. That's not actually unsafe in our usage,
but nonetheless builds on macOS are starting to complain about sprintf
being unconditionally deprecated; and I wouldn't be surprised if other
platforms follow suit. There seems little reason to believe that any
platform supporting C99 wouldn't have standards-compliant snprintf,
so let's just use that instead to suppress such warnings.
Back-patch to v12, which is where we started to require C99. It's
also where we started to use our snprintf.c everywhere, so this
wouldn't be enough to suppress the warning in older branches anyway
--- that is, in older branches these aren't necessarily all our
usages of libc's sprintf. It is enough in v12+ because any
deprecation annotation attached to libc's sprintf won't apply to
pg_sprintf. (Whether all our usages of pg_sprintf are adequately
safe is not a matter I intend to address here, but perhaps it could
do with some review.)
Per report from Andres Freund and local testing.
Discussion: https://postgr.es/m/20221015211955.q4cwbsfkyk3c4ty3@awork3.anarazel.de
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
We'd like to use precompiled headers on windows to reduce compile times. Right
now we rely on defining UMDF_USING_NTSTATUS before including postgres.h in a few
select places - which doesn't work with precompiled headers. Instead define
it globally.
When UMDF_USING_NTSTATUS is defined we need to explicitly include ntstatus.h,
winternl.h to get a comparable set of symbols. Right now these includes would
be required in a number of non-platform-specific .c files - to avoid that,
include them in win32_port.h. Based on my measurements that doesn't increase
compile times measurably.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220927011951.j3h4o7n6bhf7dwau@awork3.anarazel.de
Commits cf112c12 and a0dc8271 were a little too hasty in getting rid of
the pg_ prefixes where we use pread(), pwrite() and vectored variants.
We dropped support for ancient Unixes where we needed to use lseek() to
implement replacements for those, but it turns out that Windows also
changes the current position even when you pass in an offset to
ReadFile() and WriteFile() if the file handle is synchronous, despite
its documentation saying otherwise.
Switching to asynchronous file handles would fix that, but have other
complications. For now let's just put back the pg_ prefix and add some
comments to highlight the non-standard side-effect, which we can now
describe as Windows-only.
Reported-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20220923202439.GA1156054%40nathanxps13
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
Nathan Bossart