This commit implements psql tab completion for ALTER TABLE ... SPLIT PARTITION
and ALTER TABLE ... MERGE PARTITIONS commands.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/5dee3937-8e9f-cca4-11fb-737709a92b37%40gmail.com
Author: Dagfinn Ilmari Mannsåker, Pavel Borisov
The documentation says that PQsslAttribute(conn, "alpn") returns an
empty string if ALPN is not used, but the code actually returned
NULL. Fix the code to match the documentation.
Reported-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZideNHji0G4gxmc3@paquier.xyz
\dD showed domain check constraints in arbitrary order, which can
cause regression test failures, which was exposed by commit
9895b35cb8. To fix, order the constraints by conname, which matches
what psql does in other queries listing constraints.
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
After a query cancel, the tail end of ExecQueryAndProcessResults
took care to clear any not-yet-read PGresults; but it forgot about
the one it has already read. There would only be such a result
when handling a multi-command string made with "\;", so that you'd
have to cancel an earlier command in such a string to reach the
bug at all. Even then, there would only be leakage of a single
PGresult per cancel, so it's not surprising nobody noticed this.
But a leak is a leak.
Noted while re-reviewing 90f517821, but this is independent of that:
it dates to 7844c9918. Back-patch to v15 where that came in.
Alexander Lakhin noted an obsolete comment, which led me to revisit
some other important comments in the patch, and that study turned up a
couple of unintended ways in which the chunked-fetch code path didn't
match the normal code path in ExecQueryAndProcessResults. The only
nontrivial problem is that it didn't call PrintQueryStatus, so that
we'd not print the final status result from DML ... RETURNING
commands. To avoid code duplication, move the filter for whether a
result is from RETURNING from PrintQueryResult to PrintQueryStatus.
Discussion: https://postgr.es/m/0023bea5-79c0-476e-96c8-dad599cc3ad8@gmail.com
This adds tab completion of "GRANT" and "REVOKE [GRANT OPTION FOR]"
for ALTER DEFAULT PRIVILEGES, and adds "WITH GRANT OPTION" for
ALTER DEFAULT PRIVILEGES ... GRANT ... TO role.
Author: Vignesh C, with cosmetic adjustments by me
Reviewed-by: Shubham Khanna, Masahiko Sawada
Discussion: https://postgr.es/m/CALDaNm1aEdJb-QJi%3DGWStkfj_%2BEDUK_VtDkn%2BTjQ2z7HyU0MBw%40mail.gmail.com
libpq now always tries to send ALPN. With the traditional negotiated
SSL connections, the server accepts the ALPN, and refuses the
connection if it's not what we expect, but connecting without ALPN is
still OK. With the new direct SSL connections, ALPN is mandatory.
NOTE: This uses "TBD-pgsql" as the protocol ID. We must register a
proper one with IANA before the release!
Author: Greg Stark, Heikki Linnakangas
Reviewed-by: Matthias van de Meent, Jacob Champion
Formerly this was done with a cursor, which is problematic since
not all result-set-returning query types can be put into a cursor.
The new implementation is better integrated into other psql
features, too.
Daniel Vérité, reviewed by Laurenz Albe and myself (and whacked
around a bit by me, so any remaining bugs are my fault)
Discussion: https://postgr.es/m/CAKZiRmxsVTkO928CM+-ADvsMyePmU3L9DQCa9NwqjvLPcEe5QA@mail.gmail.com
After installing the SIGINT handler in psql, SIGINT can no longer cancel
database reconnections. For instance, if the user starts a reconnection
and then needs to do some form of interaction (ie psql is polling),
there is no way to cancel the reconnection process currently.
Use PQconnectStartParams() in order to insert a cancel_pressed check
into the polling loop.
Tristan Partin, reviewed by Gurjeet Singh, Heikki Linnakangas, Jelte
Fennema-Nio, and me.
Discussion: http://postgr.es/m/D08WWCPVHKHN.3QELIKZJ2D9RZ@neon.tech
This commit adds a new COPY option LOG_VERBOSITY, which controls the
amount of messages emitted during processing. Valid values are
'default' and 'verbose'.
This is currently used in COPY FROM when ON_ERROR option is set to
ignore. If 'verbose' is specified, a NOTICE message is emitted for
each discarded row, providing additional information such as line
number, column name, and the malformed value. This helps users to
identify problematic rows that failed to load.
Author: Bharath Rupireddy
Reviewed-by: Michael Paquier, Atsushi Torikoshi, Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CALj2ACUk700cYhx1ATRQyRw-fBM%2BaRo6auRAitKGff7XNmYfqQ%40mail.gmail.com
This allows MERGE commands to include WHEN NOT MATCHED BY SOURCE
actions, which operate on rows that exist in the target relation, but
not in the data source. These actions can execute UPDATE, DELETE, or
DO NOTHING sub-commands.
This is in contrast to already-supported WHEN NOT MATCHED actions,
which operate on rows that exist in the data source, but not in the
target relation. To make this distinction clearer, such actions may
now be written as WHEN NOT MATCHED BY TARGET.
Writing WHEN NOT MATCHED without specifying BY SOURCE or BY TARGET is
equivalent to writing WHEN NOT MATCHED BY TARGET.
Dean Rasheed, reviewed by Alvaro Herrera, Ted Yu and Vik Fearing.
Discussion: https://postgr.es/m/CAEZATCWqnKGc57Y_JanUBHQXNKcXd7r=0R4NEZUVwP+syRkWbA@mail.gmail.com
This allows a RETURNING clause to be appended to a MERGE query, to
return values based on each row inserted, updated, or deleted. As with
plain INSERT, UPDATE, and DELETE commands, the returned values are
based on the new contents of the target table for INSERT and UPDATE
actions, and on its old contents for DELETE actions. Values from the
source relation may also be returned.
As with INSERT/UPDATE/DELETE, the output of MERGE ... RETURNING may be
used as the source relation for other operations such as WITH queries
and COPY commands.
Additionally, a special function merge_action() is provided, which
returns 'INSERT', 'UPDATE', or 'DELETE', depending on the action
executed for each row. The merge_action() function can be used
anywhere in the RETURNING list, including in arbitrary expressions and
subqueries, but it is an error to use it anywhere outside of a MERGE
query's RETURNING list.
Dean Rasheed, reviewed by Isaac Morland, Vik Fearing, Alvaro Herrera,
Gurjeet Singh, Jian He, Jeff Davis, Merlin Moncure, Peter Eisentraut,
and Wolfgang Walther.
Discussion: http://postgr.es/m/CAEZATCWePEGQR5LBn-vD6SfeLZafzEm2Qy_L_Oky2=qw2w3Pzg@mail.gmail.com
psql has the :{?name} syntax for testing for a psql variable existence. This
commit implements a tab completion for this syntax. Notably, in order to
implement this we have to remove '{' from WORD_BREAKS. It appears that
'{' here from the very beginning and it comes from the default value of
rl_basic_word_break_characters. And :{?name} is the only psql syntax using
the '{' sign. So, removing it from WORD_BREAKS shouldn't break anything.
Discussion: https://postgr.es/m/CAGRrpzZU48F2oV3d8eDLr%3D4TU9xFH5Jt9ED%2BqU1%2BX91gMH68Sw%40mail.gmail.com
Author: Steve Chavez
Reviewed-by: Erik Wienhold
New provider for collations, like "libc" or "icu", but without any
external dependency.
Initially, the only locale supported by the builtin provider is "C",
which is identical to the libc provider's "C" locale. The libc
provider's "C" locale has always been treated as a special case that
uses an internal implementation, without using libc at all -- so the
new builtin provider uses the same implementation.
The builtin provider's locale is independent of the server environment
variables LC_COLLATE and LC_CTYPE. Using the builtin provider, the
database collation locale can be "C" while LC_COLLATE and LC_CTYPE are
set to "en_US", which is impossible with the libc provider.
By offering a new builtin provider, it clarifies that the semantics of
a collation using this provider will never depend on libc, and makes
it easier to document the behavior.
Discussion: https://postgr.es/m/ab925f69-5f9d-f85e-b87c-bd2a44798659@joeconway.com
Discussion: https://postgr.es/m/dd9261f4-7a98-4565-93ec-336c1c110d90@manitou-mail.org
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Daniel Vérité, Peter Eisentraut, Jeremy Schneider
Roles with MAINTAIN on a relation may run VACUUM, ANALYZE, REINDEX,
REFRESH MATERIALIZE VIEW, CLUSTER, and LOCK TABLE on the relation.
Roles with privileges of pg_maintain may run those same commands on
all relations.
This was previously committed for v16, but it was reverted in
commit 151c22deee due to concerns about search_path tricks that
could be used to escalate privileges to the table owner. Commits
2af07e2f74, 59825d1639, and c7ea3f4229 resolved these concerns by
restricting search_path when running maintenance commands.
Bumps catversion.
Reviewed-by: Jeff Davis
Discussion: https://postgr.es/m/20240305161235.GA3478007%40nathanxps13
Rename pg_collation.colliculocale to colllocale, and
pg_database.daticulocale to datlocale. These names reflects that the
fields will be useful for the upcoming builtin provider as well, not
just for ICU.
This is purely a rename; no changes to the meaning of the fields.
Discussion: https://postgr.es/m/ff4c2f2f9c8fc7ca27c1c24ae37ecaeaeaff6b53.camel%40j-davis.com
Reviewed-by: Peter Eisentraut
do_watch had some leftover logic for enabling siglongjmp out of
waiting for input. That's never done anything on Windows (cf.
psql_cancel_callback), and do_watch no longer relies on it for
non-Windows, so let's drop it.
Also, when the user cancels \watch by pressing ^C, the Windows
code would run the query one more time before exiting. That doesn't
seem very desirable, and it's not what happens on other platforms.
Use the "done" flag similarly to non-Windows to avoid the extra query
execution.
Yugo Nagata (with minor fixes by me)
Discussion: https://postgr.es/m/20240305220552.85fd4afd6b6b8103bf4fe3d0@sraoss.co.jp
This option can be used to switch a relation to use the access method
set by default_table_access_method when running the command.
This has come up when discussing the possibility to support setting
pg_class.relam for partitioned tables (left out here as future work),
while being useful on its own for relations with physical storage as
these must have an access method set.
Per suggestion from Justin Pryzby.
Author: Michael Paquier
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/ZeCZ89xAVFeOmrQC@pryzbyj2023
pg_constraint.conwithoutoverlaps was recently added to support primary
keys and unique constraints with the WITHOUT OVERLAPS clause. An
upcoming patch provides the foreign-key side of this functionality,
but the syntax there is different and uses the keyword PERIOD. It
would make sense to use the same pg_constraint field for both of
these, but then we should pick a more general name that conveys "this
constraint has a temporal/period-related feature". conperiod works
for that and is nicely compact. Changing this now avoids possibly
having to introduce versioning into clients. Note there are still
some "without overlaps" variables left, which deal specifically with
the parsing of the primary key/unique constraint feature.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
This allows the target relation of MERGE to be an auto-updatable or
trigger-updatable view, and includes support for WITH CHECK OPTION,
security barrier views, and security invoker views.
A trigger-updatable view must have INSTEAD OF triggers for every type
of action (INSERT, UPDATE, and DELETE) mentioned in the MERGE command.
An auto-updatable view must not have any INSTEAD OF triggers. Mixing
auto-update and trigger-update actions (i.e., having a partial set of
INSTEAD OF triggers) is not supported.
Rule-updatable views are also not supported, since there is no
rewriter support for non-SELECT rules with MERGE operations.
Dean Rasheed, reviewed by Jian He and Alvaro Herrera.
Discussion: https://postgr.es/m/CAEZATCVcB1g0nmxuEc-A+gGB0HnfcGQNGYH7gS=7rq0u0zOBXA@mail.gmail.com
Commit 6b80394781 introduced integer comparison functions designed
to be as efficient as possible while avoiding overflow. This
commit makes use of these functions in many of the in-tree qsort()
comparators to help ensure transitivity. Many of these comparator
functions should also see a small performance boost.
Author: Mats Kindahl
Reviewed-by: Andres Freund, Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CA%2B14426g2Wa9QuUpmakwPxXFWG_1FaY0AsApkvcTBy-YfS6uaw%40mail.gmail.com
This commit introduces a new subscription option named 'failover', which
provides users with the ability to set the failover property of the
replication slot on the publisher when creating or altering a
subscription.
This uses the replication commands introduced by commit 7329240437 to
enable the failover option for a logical replication slot.
If the failover option is set to true, the associated replication slots
(i.e. the main slot and the table sync slots) in the upstream database are
enabled to be synchronized to the standbys. Note that the capability to
sync the replication slots will be added in subsequent commits.
Thanks to Masahiko Sawada for the design inputs.
Author: Shveta Malik, Hou Zhijie, Ajin Cherian
Reviewed-by: Peter Smith, Bertrand Drouvot, Dilip Kumar, Masahiko Sawada, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Add WITHOUT OVERLAPS clause to PRIMARY KEY and UNIQUE constraints.
These are backed by GiST indexes instead of B-tree indexes, since they
are essentially exclusion constraints with = for the scalar parts of
the key and && for the temporal part.
Author: Paul A. Jungwirth <pj@illuminatedcomputing.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CA+renyUApHgSZF9-nd-a0+OPGharLQLO=mDHcY4_qQ0+noCUVg@mail.gmail.com
All commands accepting arguments, handling them with OT_NORMAL, OT_SQLID
or OT_SQLIDHACK, should call ignore_slash_options() in inactive branch
to scan and discard extra arguments. All the backslash commands that
handle arguments do so, except \bind.
This commit adds the missing ignore_slash_options to \bind's inactive
branch. This inconsistency is a logic bug, however the behavior happens
to be unchanged as any extra arguments are discarded later in
HandleSlashCmds(), so no backpatch is done.
While on it, this adds \bind to the list of backslash commands where
inactive \if branches are checked in the tests for psql.
Reported-by: Jelte Fennema-Nio
Author: Anthonin Bonnefoy
Discussion: https://postgr.es/m/CAGECzQR1+udGKz+FbHiCQ7CWDiF1fCGi2xYuvQUODdMAfJbaLA@mail.gmail.com
Currently, when source data contains unexpected data regarding data type or
range, the entire COPY fails. However, in some cases, such data can be ignored
and just copying normal data is preferable.
This commit adds a new option SAVE_ERROR_TO, which specifies where to save the
error information. When this option is specified, COPY skips soft errors and
continues copying.
Currently, SAVE_ERROR_TO only supports "none". This indicates error information
is not saved and COPY just skips the unexpected data and continues running.
Later works are expected to add more choices, such as 'log' and 'table'.
Author: Damir Belyalov, Atsushi Torikoshi, Alex Shulgin, Jian He
Discussion: https://postgr.es/m/87k31ftoe0.fsf_-_%40commandprompt.com
Reviewed-by: Pavel Stehule, Andres Freund, Tom Lane, Daniel Gustafsson,
Reviewed-by: Alena Rybakina, Andy Fan, Andrei Lepikhov, Masahiko Sawada
Reviewed-by: Vignesh C, Atsushi Torikoshi
Many psql backslash commands tolerate trailing semicolons, even
though that's not part of the official syntax. These did not.
They tried to, by passing semicolon = true to psql_scan_slash_option,
but that function ignored this parameter in OT_WHOLE_LINE mode.
Teach it to do the right thing, and remove the now-duplicative
logic in exec_command_help.
Discussion: https://postgr.es/m/2012251.1704746912@sss.pgh.pa.us
Essentially this moves the non-interactive part of psql's "\password"
command into an exported client function. The password is not sent to the
server in cleartext because it is "encrypted" (in the case of scram and md5
it is actually hashed, but we have called these encrypted passwords for a
long time now) on the client side. This is good because it ensures the
cleartext password is never known by the server, and therefore won't end up
in logs, pg_stat displays, etc.
In other words, it exists for the same reason as PQencryptPasswordConn(), but
is more convenient as it both builds and runs the "ALTER USER" command for
you. PQchangePassword() uses PQencryptPasswordConn() to do the password
encryption. PQencryptPasswordConn() is passed a NULL for the algorithm
argument, hence encryption is done according to the server's
password_encryption setting.
Also modify the psql client to use the new function. That provides a builtin
test case. Ultimately drivers built on top of libpq should expose this
function and its use should be generally encouraged over doing ALTER USER
directly for password changes.
Author: Joe Conway
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/flat/b75955f7-e8cc-4bbd-817f-ef536bacbe93%40joeconway.com
This adds a new ALTER TABLE subcommand ALTER COLUMN ... SET EXPRESSION
that changes the generation expression of a generated column.
The syntax is not standard but was adapted from other SQL
implementations.
This command causes a table rewrite, using the usual ALTER TABLE
mechanisms. The implementation is similar to and makes use of some of
the infrastructure of the SET DATA TYPE subcommand (for example,
rebuilding constraints and indexes afterwards). The new command
requires a new pass in AlterTablePass, and the ADD COLUMN pass had to
be moved earlier so that combinations of ADD COLUMN and SET EXPRESSION
can work.
Author: Amul Sul <sulamul@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAAJ_b94yyJeGA-5M951_Lr+KfZokOp-2kXicpmEhi5FXhBeTog@mail.gmail.com
There are a lot of Perl scripts in the tree, mostly code generation
and TAP tests. Occasionally, these scripts produce warnings. These
are probably always mistakes on the developer side (true positives).
Typical examples are warnings from genbki.pl or related when you make
a mess in the catalog files during development, or warnings from tests
when they massage a config file that looks different on different
hosts, or mistakes during merges (e.g., duplicate subroutine
definitions), or just mistakes that weren't noticed because there is a
lot of output in a verbose build.
This changes all warnings into fatal errors, by replacing
use warnings;
by
use warnings FATAL => 'all';
in all Perl files.
Discussion: https://www.postgresql.org/message-id/flat/06f899fd-1826-05ab-42d6-adeb1fd5e200%40eisentraut.org
Commit 664d75753 pulled 010_tab_completion.pl's infrastructure for
invoking an interactive psql session out into a generally-useful test
function, but it didn't move enough stuff. We need to set up various
environment variables that readline will look at, both to ensure
stability of test results and to prevent test actions from cluttering
the calling user's ~/.psql_history. Expecting calling scripts to
remember to do that is too failure-prone: the other existing caller
001_password.pl did not do it. Hence, remove those initialization
steps from 010_tab_completion.pl and put them into interactive_psql().
Since interactive_psql was already making a local ENV hash, this has
no effect on calling scripts.
Discussion: https://postgr.es/m/794610.1703182896@sss.pgh.pa.us
Add support for tab completion of WITH (...) options to CREATE VIEW,
and for the corresponding SET/RESET (...) options in ALTER VIEW.
Christoph Heiss, reviewed by Melih Mutlu, Vignesh C, Jim Jones,
Mikhail Gribkov, David Zhang, Shubham Khanna, and me.
Discussion: https://postgr.es/m/a2075c5a-66f9-a564-f038-9ac044b03117@c8h4.io
"AS" is added as a suggested keyword for CREATE TABLE for a few query
patterns, including the case where a list of columns is given in
parenthesis.
More queries can be now completed with the keywords supported for
queries in a CTAS, after:
CREATE TABLE [TEMP|TEMPORARY|UNLOGGED] <name> [ (...) ] AS
Author: Gilles Darold
Reviewed-by: Jim Jones
Discussion: https://postgr.es/m/e462b251-99a7-4abc-aedc-214688742c80@darold.net
Default privileges are represented as NULL::aclitem[] in catalog ACL
columns, while revoking all privileges leaves an empty aclitem[].
These two cases used to produce identical output in psql meta-commands
like \dp. Using something like "\pset null '(default)'" as a
workaround for spotting the difference did not work, because null
values were always displayed as empty strings by describe.c's
meta-commands.
This patch improves that with two changes:
1. Print "(none)" for empty privileges so that the user is able to
distinguish them from default privileges, even without special
workarounds.
2. Remove the special handling of null values in describe.c,
so that "\pset null" is honored like everywhere else.
(This affects all output from these commands, not only ACLs.)
The privileges shown by \dconfig+ and \ddp as well as the column
privileges shown by \dp are not affected by change #1, because the
respective aclitem[] is reset to NULL or deleted from the catalog
instead of leaving an empty array.
Erik Wienhold and Laurenz Albe
Discussion: https://postgr.es/m/1966228777.127452.1694979110595@office.mailbox.org
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
Since C99, there can be a trailing comma after the last value in an
enum definition. A lot of new code has been introducing this style on
the fly. Some new patches are now taking an inconsistent approach to
this. Some add the last comma on the fly if they add a new last
value, some are trying to preserve the existing style in each place,
some are even dropping the last comma if there was one. We could
nudge this all in a consistent direction if we just add the trailing
commas everywhere once.
I omitted a few places where there was a fixed "last" value that will
always stay last. I also skipped the header files of libpq and ecpg,
in case people want to use those with older compilers. There were
also a small number of cases where the enum type wasn't used anywhere
(but the enum values were), which ended up confusing pgindent a bit,
so I left those alone.
Discussion: https://www.postgresql.org/message-id/flat/386f8c45-c8ac-4681-8add-e3b0852c1620%40eisentraut.org
This commit introduces trigger on login event, allowing to fire some actions
right on the user connection. This can be useful for logging or connection
check purposes as well as for some personalization of environment. Usage
details are described in the documentation included, but shortly usage is
the same as for other triggers: create function returning event_trigger and
then create event trigger on login event.
In order to prevent the connection time overhead when there are no triggers
the commit introduces pg_database.dathasloginevt flag, which indicates database
has active login triggers. This flag is set by CREATE/ALTER EVENT TRIGGER
command, and unset at connection time when no active triggers found.
Author: Konstantin Knizhnik, Mikhail Gribkov
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709%40postgrespro.ru
Reviewed-by: Pavel Stehule, Takayuki Tsunakawa, Greg Nancarrow, Ivan Panchenko
Reviewed-by: Daniel Gustafsson, Teodor Sigaev, Robert Haas, Andres Freund
Reviewed-by: Tom Lane, Andrey Sokolov, Zhihong Yu, Sergey Shinderuk
Reviewed-by: Gregory Stark, Nikita Malakhov, Ted Yu
AT TIME ZONE is completed with a list of supported timezones, something
not needed by AT LOCAL.
Author: Dagfinn Ilmari Mannsåker
Reviewed-by: Jim Jones
Discussion: https://postgr.es/m/87jzyzsvgv.fsf@wibble.ilmari.org
This seemed inconsistent with the --help output of other tools.
Depending on the values, it can cause ugly formatting. Also, we're
not getting the defaults from libpq, we're just emulating the methods
libpq uses to derive these values, so they might not be 100% correct.
Author: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/50ca8ff35a8dd8f9ec89963b503571a7@oss.nttdata.com
The comment
/* On some platforms, readline is declared as readline(char *) */
is obsolete. The casting away of const can be removed.
The const in the readline() prototype was added in GNU readline 4.2,
released in 2001. BSD libedit has also had const in the prototype
since at least 2001.
(The commit that introduced this comment (187e865174) talked about
FreeBSD 4.8, which didn't have readline compatibility in libedit yet,
so it must have been talking about GNU readline in the base system.
This checks out, but already FreeBSD 5 had an updated GNU readline
with const.)
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/862fc1d4-9a0c-d2b6-5451-ee3dc750bcab%40eisentraut.org
SetResultVariables() was not getting called when "printing" a result
that failed (see around PrintQueryResult), which would cause some
variables to not be set, like ROW_COUNT, SQLSTATE or ERROR. This can be
confusing as a previous result would be retained.
This state could be reached when failing to process tuples in a few
commands, like \gset when it returns no tuples, or \crosstabview. A
test is added, based on \gset.
This is arguably a bug fix, but no backpatch is done as there is a risk
of breaking scripts that rely on the previous behavior, even if they do
so accidentally.
Reported-by: amutu
Author: Japin Li
Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/18134-87126d90cb4dd049@postgresql.org
Michael Paquier