88 lines
3.3 KiB
ReStructuredText
88 lines
3.3 KiB
ReStructuredText
===========================
|
|
Configuring Cellular Modems
|
|
===========================
|
|
OPNsense supports a wide range of USB and miniPCIe cellular modems that can be used
|
|
as primary internet (WAN) connection or as failover for a fixed/ethernet connection.
|
|
|
|
With this guide we show you how to easily add a new modem and configure it to be
|
|
used as primary WAN connection.
|
|
|
|
----------------------------
|
|
Devices used for this How-to
|
|
----------------------------
|
|
For this how-to we used a `Deciso Netboard A10 desktop appliance <https://www.deciso.com/product-catalog/opn20076b/>`__
|
|
and a Huawei ME909u-521 miniPCIe cellular modem provided by `OSNet <https://www.osnet.eu/>`__.
|
|
|
|
.. Note::
|
|
Support for the ME909u-521 will be added in OPNsense 16.1.18.
|
|
|
|
----------------------------------------
|
|
Step 1 - Configure Point to Point device
|
|
----------------------------------------
|
|
Go to **Interfaces->Point-to-Point->Devices** and click on **Add** in the upper
|
|
right corner of the form.
|
|
|
|
Fill in the form like this (Example is for Dutch Mobile 4G KPN Subscription):
|
|
|
|
============================ =======================================================
|
|
**Link Type** PPP
|
|
**Link interface(s)** /dev/cuaU0.0 ( HUAWEI Mobile Connect - Modem)
|
|
**Description** 4G Cellular Network
|
|
**Service Provider** Select Country, Provider & Plan for auto configuration
|
|
**Username** Leave Empty (for NL KPN)
|
|
**Password** Leave Empty (for NL KPN)
|
|
**Phone Number** \*99# (for NL KPN)
|
|
**Access Point Name (APN)** fastinternet (for NL KPN 4G)
|
|
============================ =======================================================
|
|
|
|
If you need to enter a PIN number then click on **Advanced Options**
|
|
|
|
Click **Save** to apply the settings.
|
|
|
|
.. image:: images/4g_configure_ppp.png
|
|
:scale: 100%
|
|
|
|
|
|
.. image:: images/ppp_celular_configured.png
|
|
:scale: 100%
|
|
|
|
---------------------------------
|
|
Step 2 - Assign the WAN interface
|
|
---------------------------------
|
|
To assign the interface go to **Interfaces->Assignments** in our case we will make
|
|
this our primary internet connection and change the WAN assignment accordingly.
|
|
|
|
To do so just change the **Network port** for **WAN** to **ppp0 (/dev/cuaU0.0) - 4G Cellular Network**.
|
|
|
|
No click **Save** below the form.
|
|
|
|
If everything went fine then your are all setup and the default gateway will be
|
|
the one of you cellular connection.
|
|
|
|
.. image:: images/Interface_assignment_4g.png
|
|
:scale: 100%
|
|
|
|
-------------------------
|
|
Step 3 - Trouble shooting
|
|
-------------------------
|
|
Ok, so it doesn't work as expected.
|
|
In that case, first look at the log of the cellular device's PPP connection, to do
|
|
so go to: **Interfaces->Point-to-Point->Log File**. Often you can see what went
|
|
wrong directly in the log.
|
|
|
|
If you can't figure out what is wrong then a reboot to reinitialize the device can
|
|
sometimes help.
|
|
|
|
.. Note::
|
|
|
|
Before booting your device it is best to make sure the SIM card is inserted correctly.
|
|
|
|
|
|
When the device seems to work properly then checkout if the interface was assigned
|
|
an IP address, go to **Interfaces->Overview** and click on the WAN interface to
|
|
see the details.
|
|
|
|
You should see an IP address, Gateway IP and ISP DNS server(s).
|
|
If all is filled in then either your firewall is blocking the traffic or the
|
|
network connection is not working well.
|