netdata/collectors/cgroups.plugin/README.md

cgroups.plugin

You can monitor containers and virtual machines using cgroups.

cgroups (or control groups), are a Linux kernel feature that provides accounting and resource usage limiting for processes. When cgroups are bundled with namespaces (i.e. isolation), they form what we usually call containers.

cgroups are hierarchical, meaning that cgroups can contain child cgroups, which can contain more cgroups, etc. All accounting is reported (and resource usage limits are applied) also in a hierarchical way.

To visualize cgroup metrics Netdata provides configuration for cherry picking the cgroups of interest. By default (without any configuration) Netdata should pick systemd services, all kinds of containers (lxc, docker, etc) and virtual machines spawn by managers that register them with cgroups (qemu, libvirt, etc).

configuring Netdata for cgroups

For each cgroup available in the system, Netdata provides this configuration:

[plugin:cgroups]
    enable cgroup XXX = yes | no

But it also provides a few patterns to provide a sane default (yes or no).

Below we see, how this works.

how Netdata finds the available cgroups

Linux exposes resource usage reporting and provides dynamic configuration for cgroups, using virtual files (usually) under /sys/fs/cgroup. Netdata reads /proc/self/mountinfo to detect the exact mount point of cgroups. Netdata also allows manual configuration of this mount point, using these settings:

[plugin:cgroups]
	check for new cgroups every = 10
	path to /sys/fs/cgroup/cpuacct = /sys/fs/cgroup/cpuacct
	path to /sys/fs/cgroup/blkio = /sys/fs/cgroup/blkio
	path to /sys/fs/cgroup/memory = /sys/fs/cgroup/memory
	path to /sys/fs/cgroup/devices = /sys/fs/cgroup/devices

Netdata rescans these directories for added or removed cgroups every check for new cgroups every seconds.

hierarchical search for cgroups

Since cgroups are hierarchical, for each of the directories shown above, Netdata walks through the subdirectories recursively searching for cgroups (each subdirectory is another cgroup).

For each of the directories found, Netdata provides a configuration variable:

[plugin:cgroups]
	search for cgroups under PATH = yes | no

To provide a sane default for this setting, Netdata uses the following pattern list (patterns starting with ! give a negative match and their order is important: the first matching a path will be used):

[plugin:cgroups]
	search for cgroups in subpaths matching =  !*/init.scope  !*-qemu  !/init.scope  !/system  !/systemd  !/user  !/user.slice  *

So, we disable checking for child cgroups in systemd internal cgroups (systemd services are monitored by Netdata), user cgroups (normally used for desktop and remote user sessions), qemu virtual machines (child cgroups of virtual machines) and init.scope. All others are enabled.

unified cgroups (cgroups v2) support

Basic unified cgroups metrics are supported. To use them instead of v1 cgroups add:

[plugin:cgroups]
	use unified cgroups = yes
	path to unified cgroups = /sys/fs/cgroup

Unified cgroups use same name pattern matching as v1 cgroups. cgroup_enable_systemd_services_detailed_memory is currently unsupported when using unified cgroups.

enabled cgroups

To check if the cgroup is enabled, Netdata uses this setting:

[plugin:cgroups]
	enable cgroup NAME = yes | no

To provide a sane default, Netdata uses the following pattern list (it checks the pattern against the path of the cgroup):

[plugin:cgroups]
	enable by default cgroups matching =  !*/init.scope  *.scope  !*/vcpu*  !*/emulator  !*.mount  !*.partition  !*.service  !*.slice  !*.swap  !*.user  !/  !/docker  !/libvirt  !/lxc  !/lxc/*/ns  !/lxc/*/ns/*  !/machine  !/qemu  !/system  !/systemd  !/user  *

The above provides the default yes or no setting for the cgroup. However, there is an additional step. In many cases the cgroups found in the /sys/fs/cgroup hierarchy are just random numbers and in many cases these numbers are ephemeral: they change across reboots or sessions.

So, we need to somehow map the paths of the cgroups to names, to provide consistent Netdata configuration (i.e. there is no point to say enable cgroup 1234 = yes | no, if 1234 is a random number that changes over time - we need a name for the cgroup first, so that enable cgroup NAME = yes | no will be consistent).

For this mapping Netdata provides 2 configuration options:

[plugin:cgroups]
	run script to rename cgroups matching =  *.scope  *docker*  *lxc*  *qemu*  !/  !*.mount  !*.partition  !*.service  !*.slice  !*.swap  !*.user  *
	script to get cgroup names = /usr/libexec/netdata/plugins.d/cgroup-name.sh

The whole point for the additional pattern list, is to limit the number of times the script will be called. Without this pattern list, the script might be called thousands of times, depending on the number of cgroups available in the system.

The above pattern list is matched against the path of the cgroup. For matched cgroups, Netdata calls the script cgroup-name.sh to get its name. This script queries docker, or applies heuristics to find give a name for the cgroup.

charts with zero metrics

By default, Netdata will enable monitoring metrics only when they are not zero. If they are constantly zero they are ignored. Metrics that will start having values, after Netdata is started, will be detected and charts will be automatically added to the dashboard (a refresh of the dashboard is needed for them to appear though). Set yes for a chart instead of auto to enable it permanently. For example:

[plugin:cgroups]
	enable memory (used mem including cache) = yes

You can also set the enable zero metrics option to yes in the [global] section which enables charts with zero metrics for all internal Netdata plugins.

alarms

CPU and memory limits are watched and used to rise alarms. Memory usage for every cgroup is checked against ram and ram+swap limits. CPU usage for every cgroup is checked against cpuset.cpus and cpu.cfs_period_us + cpu.cfs_quota_us pair assigned for the cgroup. Configuration for the alarms is available in health.d/cgroups.conf file.

Monitoring systemd services

Netdata monitors systemd services. Example:

Support per distribution:

system	systemd services charts shown	tree /sys/fs/cgroup	comments
Arch Linux	YES
Gentoo	NO		can be enabled, see below
Ubuntu 16.04 LTS	YES
Ubuntu 16.10	YES	here
Fedora 25	YES	here
Debian 8	NO		can be enabled, see below
AMI	NO	here	not a systemd system
Centos 7.3.1611	NO	here	can be enabled, see below

how to enable cgroup accounting on systemd systems that is by default disabled

You can verify there is no accounting enabled, by running systemd-cgtop. The program will show only resources for cgroup /, but all services will show nothing.

To enable cgroup accounting, execute this:

sed -e 's|^#Default\(.*\)Accounting=.*$|Default\1Accounting=yes|g' /etc/systemd/system.conf >/tmp/system.conf

To see the changes it made, run this:

# diff /etc/systemd/system.conf /tmp/system.conf
40,44c40,44
< #DefaultCPUAccounting=no
< #DefaultIOAccounting=no
< #DefaultBlockIOAccounting=no
< #DefaultMemoryAccounting=no
< #DefaultTasksAccounting=yes
---
> DefaultCPUAccounting=yes
> DefaultIOAccounting=yes
> DefaultBlockIOAccounting=yes
> DefaultMemoryAccounting=yes
> DefaultTasksAccounting=yes

If you are happy with the changes, run:

# copy the file to the right location
sudo cp /tmp/system.conf /etc/systemd/system.conf

# restart systemd to take it into account
sudo systemctl daemon-reexec

(systemctl daemon-reload does not reload the configuration of the server - so you have to execute systemctl daemon-reexec).

Now, when you run systemd-cgtop, services will start reporting usage (if it does not, restart a service - any service - to wake it up). Refresh your Netdata dashboard, and you will have the charts too.

In case memory accounting is missing, you will need to enable it at your kernel, by appending the following kernel boot options and rebooting:

cgroup_enable=memory swapaccount=1

You can add the above, directly at the linux line in your /boot/grub/grub.cfg or appending them to the GRUB_CMDLINE_LINUX in /etc/default/grub (in which case you will have to run update-grub before rebooting). On DigitalOcean debian images you may have to set it at /etc/default/grub.d/50-cloudimg-settings.cfg.

Which systemd services are monitored by Netdata is determined by the following pattern list:

[plugin:cgroups]
	cgroups to match as systemd services =  !/system.slice/*/*.service  /system.slice/*.service

---

Monitoring ephemeral containers

Netdata monitors containers automatically when it is installed at the host, or when it is installed in a container that has access to the /proc and /sys filesystems of the host.

Netdata prior to v1.6 had 2 issues when such containers were monitored:

1. network interface alarms where triggering when containers were stopped

2. charts were never cleaned up, so after some time dozens of containers were showing up on the dashboard, and they were occupying memory.

the current Netdata

network interfaces and cgroups (containers) are now self-cleaned.

So, when a network interface or container stops, Netdata might log a few errors in error.log complaining about files it cannot find, but immediately:

1. it will detect this is a removed container or network interface
2. it will freeze/pause all alarms for them
3. it will mark their charts as obsolete
4. obsolete charts are not be offered on new dashboard sessions (so hit F5 and the charts are gone)
5. existing dashboard sessions will continue to see them, but of course they will not refresh
6. obsolete charts will be removed from memory, 1 hour after the last user viewed them (configurable with [global].cleanup obsolete charts after seconds = 3600 (at netdata.conf).
7. when obsolete charts are removed from memory they are also deleted from disk (configurable with [global].delete obsolete charts files = yes)