8.2 KiB
source: Support/Discovery Support.md path: blob/master/doc/
discovery.php
This document will explain how to use discovery.php to debug issues or manually running to process data.
Command options
-h <device id> | <device hostname wildcard> Poll single device
-h odd Poll odd numbered devices (same as -i 2 -n 0)
-h even Poll even numbered devices (same as -i 2 -n 1)
-h all Poll all devices
-h new Poll all devices that have not had a discovery run before
--os <os_name> Poll devices only with specified operating system
--type <type> Poll devices only with specified type
-i <instances> -n <number> Poll as instance <number> of <instances>
Instances start at 0. 0-3 for -n 4
Debugging and testing options:
-d Enable debugging output
-v Enable verbose debugging output
-m Specify module(s) to be run. Comma separate modules, submodules may be added with /
-h Use this to specify a device via either id or hostname (including
wildcard using *). You can also specify odd and even. all will run
discovery against all devices whilst new will poll only those devices
that have recently been added or have been selected for rediscovery.
-i This can be used to stagger the discovery process.
-d Enables debugging output (verbose output but with most sensitive
data masked) so that you can see what is happening during a discovery
run. This includes things like rrd updates, SQL queries and response
from snmp.
-v Enables verbose debugging output with all data in tact.
-m This enables you to specify the module you want to run for discovery.
Discovery wrapper
We have a discovery-wrapper.py script which is based on
poller-wrapper.py by Job Snijders. This
script is currently the default.
If you need to debug the output of discovery-wrapper.py then you can
add -d to the end of the command - it is NOT recommended to do this
in cron.
If you want to switch back to discovery.php then you can replace:
33 */6 * * * librenms /opt/librenms/discovery-wrapper.py 1 >> /dev/null 2>&1
With:
33 */6 * * * librenms /opt/librenms/discovery.php -h all >> /dev/null 2>&1
Discovery config
These are the default discovery config items. You can globally disable a module by setting it to 0. If you just want to disable it for one device then you can do this within the WebUI -> Device -> Settings -> Modules.
$config['discovery_modules']['os'] = true;
$config['discovery_modules']['ports'] = true;
$config['discovery_modules']['ports-stack'] = true;
$config['discovery_modules']['entity-physical'] = true;
$config['discovery_modules']['entity-state'] = false;
$config['discovery_modules']['processors'] = true;
$config['discovery_modules']['mempools'] = true;
$config['discovery_modules']['cisco-vrf-lite'] = true;
$config['discovery_modules']['cisco-mac-accounting'] = false;
$config['discovery_modules']['cisco-pw'] = false;
$config['discovery_modules']['vrf'] = false;
$config['discovery_modules']['cisco-cef'] = false;
$config['discovery_modules']['cisco-sla'] = false;
$config['discovery_modules']['cisco-cbqos'] = false;
$config['discovery_modules']['cisco-otv'] = false;
$config['discovery_modules']['ipv4-addresses'] = true;
$config['discovery_modules']['ipv6-addresses'] = true;
$config['discovery_modules']['route'] = false;
$config['discovery_modules']['sensors'] = true;
$config['discovery_modules']['storage'] = true;
$config['discovery_modules']['hr-device'] = true;
$config['discovery_modules']['discovery-protocols'] = true;
$config['discovery_modules']['arp-table'] = true;
$config['discovery_modules']['discovery-arp'] = false;
$config['discovery_modules']['junose-atm-vp'] = false;
$config['discovery_modules']['bgp-peers'] = true;
$config['discovery_modules']['vlans'] = true;
$config['discovery_modules']['vmware-vminfo'] = false;
$config['discovery_modules']['libvirt-vminfo'] = false;
$config['discovery_modules']['toner'] = false;
$config['discovery_modules']['ucd-diskio'] = true;
$config['discovery_modules']['applications'] = false;
$config['discovery_modules']['services'] = true;
$config['discovery_modules']['stp'] = true;
$config['discovery_modules']['ntp'] = true;
$config['discovery_modules']['loadbalancers'] = false;
$config['discovery_modules']['mef'] = false;
$config['discovery_modules']['wireless'] = true;
$config['discovery_modules']['fdb-table'] = true;
OS based Discovery config
You can enable or disable modules for a specific OS by add
corresponding line in config.php OS based settings have preference
over global. Device based settings have preference over all others
Discover performance improvement can be achieved by deactivating all modules that are not supported by specific OS.
E.g. to deactivate spanning tree but activate discovery-arp module for linux OS
$config['os']['linux']['discovery_modules']['stp'] = false;
$config['os']['linux']['discovery_modules']['discovery-arp'] = true;
Discovery modules
os: Os detection. This module will pick up the OS of the device.
ports: This module will detect all ports on a device excluding ones
configured to be ignored by config options.
ports-stack: Same as ports except for stacks.
entity-physical: Module to pick up the devices hardware support.
processors: Processor support for devices.
mempools: Memory detection support for devices.
cisco-vrf-lite: VRF-Lite detection and support.
ipv4-addresses: IPv4 Address detection
ipv6-addresses: IPv6 Address detection
route: This module will load the routing table of the device. The default route
limit is 1000 (configurable in config.php with
$config['routes']['max_number'] = 1000;), with history data.
sensors: Sensor detection such as Temperature, Humidity, Voltages + More
storage: Storage detection for hard disks
hr-device: Processor and Memory support via HOST-RESOURCES-MIB.
discovery-protocols: Auto discovery module for xDP, OSPF and BGP.
arp-table: Detection of the ARP table for the device.
fdb-table: Detection of the Forwarding DataBase table for the
device, with history data.
discovery-arp: Auto discovery via ARP.
junose-atm-vp: Juniper ATM support.
bgp-peers: BGP detection and support.
vlans: VLAN detection and support.
cisco-mac-accounting: MAC Address account support.
cisco-pw: Pseudowires wires detection and support.
vrf: VRF detection and support.
cisco-cef: CEF detection and support.
cisco-sla: SLA detection and support.
vmware-vminfo: Detection of vmware guests on an ESXi host
libvirt-vminfo: Detection of libvirt guests.
toner: Toner levels support.
ucd-diskio: Disk I/O support.
services: *Nix services support.
charge: APC Charge detection and support.
Running
Here are some examples of running discovery from within your install directory.
./discovery.php -h localhost
./discovery.php -h localhost -m ports
Debugging
To provide debugging output you will need to run the discovery process
with the -d flag. You can do this either against all modules, single
or multiple modules:
All Modules
./discovery.php -h localhost -d
Single Module
./discovery.php -h localhost -m ports -d
Multiple Modules
./discovery.php -h localhost -m ports,entity-physical -d
Using -d shouldn't output much sensitive information, -v will so
it is then advisable to sanitise the output before pasting it
somewhere as the debug output will contain snmp details amongst other
items including port descriptions.
The output will contain:
DB Updates
SNMP Response