60 lines
2.4 KiB
Markdown
60 lines
2.4 KiB
Markdown
KBC1126 firmware tools
|
|
======================
|
|
|
|
Many HP laptops use 8051-based SMSC KBC1098/KBC1126 as embedded
|
|
controller. Two blobs can be found in the HP firmware images. The
|
|
`kbc1126_ec_dump` and `kbc1126_ec_insert` tools are used to dump the
|
|
two blobs from the factory firmware and insert them to the firmware
|
|
image.
|
|
|
|
|
|
Firmware format
|
|
---------------
|
|
|
|
We can easily find the BIOS region of the HP laptop firmware from the
|
|
HP firmware update tool, which can be downloaded from the HP
|
|
website. Now I take HP Elitebook 8470p as an example. This laptop has
|
|
a 16MB flash chip, the last 5MB of which is the BIOS region.
|
|
|
|
I use [radare2](https://radare.org) to analyze the firmware. Open the
|
|
firmware image, and we can see 8 bytes at `$s-0x100` (`$s` means the
|
|
image size).
|
|
|
|
[0x00000000]> x @ $s-0x100
|
|
- offset - 0 1 2 3 4 5 6 7 8 9 A B C D E F 0123456789ABCDEF
|
|
0x00ffff00 fff7 0008 f700 08ff 0000 0000 0000 0000 ................
|
|
|
|
X86 machines map the firmware at the end of the memory address
|
|
space. These 8 bytes tell the address of the two blobs, which we call
|
|
FW1 (uses bytes 0-3) and FW2 (uses bytes 4-7).
|
|
|
|
Let's look at FW1. The first two bytes mean the address of FW1 is
|
|
0xfff700 (these two bytes use big endian), i.e. `$s-0x900`. Byte 2 and
|
|
3 are just complements of byte 1 and 2 (in this case,
|
|
0x0008=0xffff-0xfff7).
|
|
|
|
[0x00000000]> x @ $s-0x900
|
|
- offset - 0 1 2 3 4 5 6 7 8 9 A B C D E F 0123456789ABCDEF
|
|
0x00fff700 fc07 c13e 02ff 1000 0000 0000 0000 0000 ...>............
|
|
|
|
Both FW1 and FW2 use the same format: the first two bytes is payload
|
|
length, then a two-byte checksum, then the payload. The payload length
|
|
and checksum are both in little endian. The checksum is
|
|
[SYSV checksum](https://en.wikipedia.org/wiki/SYSV_checksum).
|
|
|
|
|
|
How to use the tools
|
|
--------------------
|
|
|
|
`kbc1126_ec_dump` is used to dump FW1 and FW2. Run `kbc1126_ec_dump
|
|
bios.rom`, then bios.rom.fw1 and bios.rom.fw2 are generated in the
|
|
working directory.
|
|
|
|
`kbc1126_ec_insert` will overwrite a firmware image by inserting FW1
|
|
and FW2 in it. Please run it for its usage. You need to specify the
|
|
offsets for FW1 and FW2. Using negative offset is recommended, which
|
|
means the distance to the end of the image. For example, if we want to
|
|
insert FW1 and FW2 at `$s-0x900` and `$s-0x90000` as the hp/8470p
|
|
factory firmware to coreboot.rom, you can run `kbc1126_ec_insert
|
|
coreboot.rom bios.rom.fw1 bios.rom.fw2 -0x900 -0x90000`.
|