hal_ti/simplelink/source/ti/devices/cc13x2_cc26x2/driverlib/rfc.h

467 lines
16 KiB
C

/******************************************************************************
* Filename: rfc.h
* Revised: 2018-08-08 14:03:25 +0200 (Wed, 08 Aug 2018)
* Revision: 52338
*
* Description: Defines and prototypes for the RF Core.
*
* Copyright (c) 2015 - 2017, Texas Instruments Incorporated
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2) Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3) Neither the name of the ORGANIZATION nor the names of its contributors may
* be used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************/
//*****************************************************************************
//
//! \addtogroup rfc_api
//! @{
//
//*****************************************************************************
#ifndef __RFC_H__
#define __RFC_H__
//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif
#include <stdbool.h>
#include <stdint.h>
#include <ti/devices/DeviceFamily.h>
#include DeviceFamily_constructPath(inc/hw_types.h)
#include DeviceFamily_constructPath(inc/hw_memmap.h)
#include DeviceFamily_constructPath(inc/hw_rfc_pwr.h)
#include DeviceFamily_constructPath(inc/hw_rfc_dbell.h)
#include DeviceFamily_constructPath(inc/hw_fcfg1.h)
#include DeviceFamily_constructPath(inc/hw_adi_3_refsys.h)
#include DeviceFamily_constructPath(inc/hw_adi.h)
#include "rf_common_cmd.h"
#include "rf_prop_cmd.h"
#include "rf_ble_cmd.h"
// Definition of RFTRIM container
typedef struct {
uint32_t configIfAdc;
uint32_t configRfFrontend;
uint32_t configSynth;
uint32_t configMiscAdc;
} rfTrim_t;
// Definition of maximum search depth used by the RFCOverrideUpdate function
#define RFC_MAX_SEARCH_DEPTH 5
#define RFC_PA_TYPE_ADDRESS 0x21000385
#define RFC_PA_TYPE_MASK 0x04
#define RFC_PA_GAIN_ADDRESS 0x21000398
#define RFC_PA_GAIN_MASK 0x003FFFFF
#define RFC_FE_MODE_ESCAPE_VALUE 0xFF
#define RFC_FE_OVERRIDE_ADDRESS 0x0703
#define RFC_FE_OVERRIDE_MASK 0x0000FFFF
//*****************************************************************************
//
// Support for DriverLib in ROM:
// This section renames all functions that are not "static inline", so that
// calling these functions will default to implementation in flash. At the end
// of this file a second renaming will change the defaults to implementation in
// ROM for available functions.
//
// To force use of the implementation in flash, e.g. for debugging:
// - Globally: Define DRIVERLIB_NOROM at project level
// - Per function: Use prefix "NOROM_" when calling the function
//
//*****************************************************************************
#if !defined(DOXYGEN)
#define RFCCpeIntGetAndClear NOROM_RFCCpeIntGetAndClear
#define RFCDoorbellSendTo NOROM_RFCDoorbellSendTo
#define RFCSynthPowerDown NOROM_RFCSynthPowerDown
#define RFCCpePatchReset NOROM_RFCCpePatchReset
#define RFCOverrideSearch NOROM_RFCOverrideSearch
#define RFCOverrideUpdate NOROM_RFCOverrideUpdate
#define RFCHwIntGetAndClear NOROM_RFCHwIntGetAndClear
#define RFCAnaDivTxOverride NOROM_RFCAnaDivTxOverride
#endif
//*****************************************************************************
//
// API Functions and prototypes
//
//*****************************************************************************
//*****************************************************************************
//
//! \brief Enable the RF core clocks.
//!
//! As soon as the RF core is started it will handle clock control
//! autonomously. No check should be performed to check the clocks. Instead
//! the radio can be ping'ed through the command interface.
//!
//! \return None
//
//*****************************************************************************
__STATIC_INLINE void
RFCClockEnable(void)
{
// Enable basic clocks to get the CPE run
HWREG(RFC_PWR_NONBUF_BASE + RFC_PWR_O_PWMCLKEN) = RFC_PWR_PWMCLKEN_CPERAM
| RFC_PWR_PWMCLKEN_CPE
| RFC_PWR_PWMCLKEN_RFC;
}
//*****************************************************************************
//
//! \brief Disable the RF core clocks.
//!
//! As soon as the RF core is started it will handle clock control
//! autonomously. No check should be performed to check the clocks. Instead
//! the radio can be ping'ed through the command interface.
//!
//! When disabling clocks it is the programmers responsibility that the
//! RF core clocks are safely gated. I.e. the RF core should be safely
//! 'parked'.
//!
//! \return None
//
//*****************************************************************************
__STATIC_INLINE void
RFCClockDisable(void)
{
// Disable all clocks
HWREG(RFC_PWR_NONBUF_BASE + RFC_PWR_O_PWMCLKEN) = 0x0;
}
//*****************************************************************************
//
//! Clear HW interrupt flags
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpeIntClear(uint32_t ui32Mask)
{
// Clear the masked pending interrupts.
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIFG) = ~ui32Mask;
}
//*****************************************************************************
//
//! Clear CPE interrupt flags.
//
//*****************************************************************************
__STATIC_INLINE void
RFCHwIntClear(uint32_t ui32Mask)
{
// Clear the masked pending interrupts.
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIFG) = ~ui32Mask;
}
//*****************************************************************************
//
//! Select interrupt sources to CPE0 (assign to INT_RFC_CPE_0 interrupt vector).
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpe0IntSelect(uint32_t ui32Mask)
{
// Multiplex RF Core interrupts to CPE0 IRQ.
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEISL) &= ~ui32Mask;
}
//*****************************************************************************
//
//! Select interrupt sources to CPE1 (assign to INT_RFC_CPE_1 interrupt vector).
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpe1IntSelect(uint32_t ui32Mask)
{
// Multiplex RF Core interrupts to CPE1 IRQ.
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEISL) |= ui32Mask;
}
//*****************************************************************************
//
//! Enable CPEx interrupt sources.
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpeIntEnable(uint32_t ui32Mask)
{
// Enable CPE interrupts from RF Core.
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIEN) |= ui32Mask;
}
//*****************************************************************************
//
//! Select, clear, and enable interrupt sources to CPE0.
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpe0IntSelectClearEnable(uint32_t ui32Mask)
{
// Multiplex RF Core interrupts to CPE0 IRQ.
RFCCpe0IntSelect(ui32Mask);
// Clear the masked interrupts.
RFCCpeIntClear(ui32Mask);
// Enable the masked interrupts.
RFCCpeIntEnable(ui32Mask);
}
//*****************************************************************************
//
//! Select, clear, and enable interrupt sources to CPE1.
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpe1IntSelectClearEnable(uint32_t ui32Mask)
{
// Multiplex RF Core interrupts to CPE1 IRQ.
RFCCpe1IntSelect(ui32Mask);
// Clear the masked interrupts.
RFCCpeIntClear(ui32Mask);
// Enable the masked interrupts.
RFCCpeIntEnable(ui32Mask);
}
//*****************************************************************************
//
//! Enable HW interrupt sources.
//
//*****************************************************************************
__STATIC_INLINE void
RFCHwIntEnable(uint32_t ui32Mask)
{
// Enable the masked interrupts
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIEN) |= ui32Mask;
}
//*****************************************************************************
//
//! Disable CPE interrupt sources.
//
//*****************************************************************************
__STATIC_INLINE void
RFCCpeIntDisable(uint32_t ui32Mask)
{
// Disable the masked interrupts
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFCPEIEN) &= ~ui32Mask;
}
//*****************************************************************************
//
//! Disable HW interrupt sources.
//
//*****************************************************************************
__STATIC_INLINE void
RFCHwIntDisable(uint32_t ui32Mask)
{
// Disable the masked interrupts
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFHWIEN) &= ~ui32Mask;
}
//*****************************************************************************
//
//! Get and clear CPE interrupt flags.
//
//*****************************************************************************
extern uint32_t RFCCpeIntGetAndClear(uint32_t ui32Mask);
//*****************************************************************************
//
//! Clear ACK interrupt flag.
//
//*****************************************************************************
__STATIC_INLINE void
RFCAckIntClear(void)
{
// Clear any pending interrupts.
HWREG(RFC_DBELL_BASE + RFC_DBELL_O_RFACKIFG) = 0x0;
}
//*****************************************************************************
//
//! Send a radio operation to the doorbell and wait for an acknowledgment.
//
//*****************************************************************************
extern uint32_t RFCDoorbellSendTo(uint32_t pOp);
//*****************************************************************************
//
//! This function implements a fast way to turn off the synthesizer.
//
//*****************************************************************************
extern void RFCSynthPowerDown(void);
//*****************************************************************************
//
//! Reset previously patched CPE RAM to a state where it can be patched again.
//
//*****************************************************************************
extern void RFCCpePatchReset(void);
//*****************************************************************************
//
// Function to search an override list for the provided pattern within the search depth.
//
//*****************************************************************************
extern uint8_t RFCOverrideSearch(const uint32_t *pOverride, const uint32_t pattern, const uint32_t mask, const uint8_t searchDepth);
//*****************************************************************************
//
//! Function to update override list
//
//*****************************************************************************
extern uint8_t RFCOverrideUpdate(rfc_radioOp_t *pOpSetup, uint32_t *pParams);
//*****************************************************************************
//
//! Get and clear HW interrupt flags.
//
//*****************************************************************************
extern uint32_t RFCHwIntGetAndClear(uint32_t ui32Mask);
//*****************************************************************************
//
//! Get the type of currently selected PA.
//
//*****************************************************************************
__STATIC_INLINE bool
RFCGetPaType(void)
{
return (bool)(HWREGB(RFC_PA_TYPE_ADDRESS) & RFC_PA_TYPE_MASK);
}
//*****************************************************************************
//
//! Get the gain of currently selected PA.
//
//*****************************************************************************
__STATIC_INLINE uint32_t
RFCGetPaGain(void)
{
return (HWREG(RFC_PA_GAIN_ADDRESS) & RFC_PA_GAIN_MASK);
}
//*****************************************************************************
//
//! Function to calculate the proper override run-time for the High Gain PA.
//
//*****************************************************************************
extern uint32_t RFCAnaDivTxOverride(uint8_t loDivider, uint8_t frontEndMode);
//*****************************************************************************
//
// Support for DriverLib in ROM:
// Redirect to implementation in ROM when available.
//
//*****************************************************************************
#if !defined(DRIVERLIB_NOROM) && !defined(DOXYGEN)
#include DeviceFamily_constructPath(driverlib/rom.h)
#ifdef ROM_RFCCpeIntGetAndClear
#undef RFCCpeIntGetAndClear
#define RFCCpeIntGetAndClear ROM_RFCCpeIntGetAndClear
#endif
#ifdef ROM_RFCDoorbellSendTo
#undef RFCDoorbellSendTo
#define RFCDoorbellSendTo ROM_RFCDoorbellSendTo
#endif
#ifdef ROM_RFCSynthPowerDown
#undef RFCSynthPowerDown
#define RFCSynthPowerDown ROM_RFCSynthPowerDown
#endif
#ifdef ROM_RFCCpePatchReset
#undef RFCCpePatchReset
#define RFCCpePatchReset ROM_RFCCpePatchReset
#endif
#ifdef ROM_RFCOverrideSearch
#undef RFCOverrideSearch
#define RFCOverrideSearch ROM_RFCOverrideSearch
#endif
#ifdef ROM_RFCOverrideUpdate
#undef RFCOverrideUpdate
#define RFCOverrideUpdate ROM_RFCOverrideUpdate
#endif
#ifdef ROM_RFCHwIntGetAndClear
#undef RFCHwIntGetAndClear
#define RFCHwIntGetAndClear ROM_RFCHwIntGetAndClear
#endif
#ifdef ROM_RFCAnaDivTxOverride
#undef RFCAnaDivTxOverride
#define RFCAnaDivTxOverride ROM_RFCAnaDivTxOverride
#endif
#endif
//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif
#endif // __RFC_H__
//*****************************************************************************
//
//! Close the Doxygen group.
//! @}
//
//*****************************************************************************