559 lines
15 KiB
C
559 lines
15 KiB
C
/*
|
|
* Copyright (c) 2017 - 2021, Nordic Semiconductor ASA
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY, AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#ifndef NRF_802154_CONFIG_H__
|
|
#define NRF_802154_CONFIG_H__
|
|
|
|
#ifdef NRF_802154_PROJECT_CONFIG
|
|
#include NRF_802154_PROJECT_CONFIG
|
|
#endif
|
|
|
|
#include <nrf.h>
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/**
|
|
* @defgroup nrf_802154_config 802.15.4 driver configuration
|
|
* @{
|
|
* @ingroup nrf_802154
|
|
* @brief Configuration of the 802.15.4 radio driver for nRF SoCs.
|
|
*/
|
|
|
|
/**
|
|
* @defgroup nrf_802154_config_radio Radio driver configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_CCA_MODE_DEFAULT
|
|
*
|
|
* CCA mode used by the driver.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_CCA_MODE_DEFAULT
|
|
#define NRF_802154_CCA_MODE_DEFAULT NRF_RADIO_CCA_MODE_ED
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CCA_ED_THRESHOLD_DEFAULT
|
|
*
|
|
* Energy detection threshold used in the CCA procedure.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_CCA_ED_THRESHOLD_DEFAULT
|
|
#define NRF_802154_CCA_ED_THRESHOLD_DEFAULT 0x14
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CCA_CORR_THRESHOLD_DEFAULT
|
|
*
|
|
* Correlator threshold used in the CCA procedure.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_CCA_CORR_THRESHOLD_DEFAULT
|
|
#define NRF_802154_CCA_CORR_THRESHOLD_DEFAULT 0x14
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CCA_CORR_LIMIT_DEFAULT
|
|
*
|
|
* Correlator limit used in the CCA procedure.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_CCA_CORR_LIMIT_DEFAULT
|
|
#define NRF_802154_CCA_CORR_LIMIT_DEFAULT 0x02
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_INTERNAL_RADIO_IRQ_HANDLING
|
|
*
|
|
* If the driver is expected to internally handle the RADIO IRQ.
|
|
* If the driver is used in an OS, the RADIO IRQ can be handled by the OS and passed to
|
|
* the driver by @ref nrf_802154_radio_irq_handler.
|
|
* In this case, the internal handling must be disabled.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_INTERNAL_RADIO_IRQ_HANDLING
|
|
#define NRF_802154_INTERNAL_RADIO_IRQ_HANDLING 0
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_INTERNAL_SWI_IRQ_HANDLING
|
|
*
|
|
* If the driver is expected to internally handle the SWI IRQ.
|
|
* If the driver is used in an OS, the SWI IRQ can be handled by the OS and passed to
|
|
* the driver by @ref nrf_802154_swi_irq_handler.
|
|
* In this case, the internal handling must be disabled.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_INTERNAL_SWI_IRQ_HANDLING
|
|
#define NRF_802154_INTERNAL_SWI_IRQ_HANDLING 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_IRQ_PRIORITY
|
|
*
|
|
* Interrupt priority for RADIO peripheral.
|
|
* Keep the IRQ priority high (low number) to prevent losing frames due to preemption.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_IRQ_PRIORITY
|
|
#define NRF_802154_IRQ_PRIORITY 0
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_SWI_PRIORITY
|
|
*
|
|
* The priority of software interrupt used for requests and notifications.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_SWI_PRIORITY
|
|
#define NRF_802154_SWI_PRIORITY 4
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_ECB_PRIORITY
|
|
*
|
|
* Interrupt priority for ECB peripheral used for frame encryption.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_ECB_PRIORITY
|
|
#define NRF_802154_ECB_PRIORITY 3
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_USE_RAW_API
|
|
*
|
|
* When this flag is set, the RAW API is available for the MAC layer. It is recommended to use
|
|
* the RAW API because it provides more optimized functions.
|
|
*
|
|
* @note If the RAW API is not enabled for the MAC layer, only less optimized functions performing
|
|
* copy are available.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_USE_RAW_API
|
|
#define NRF_802154_USE_RAW_API 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_PENDING_SHORT_ADDRESSES
|
|
*
|
|
* The number of slots containing short addresses of nodes for which the pending data is stored.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_PENDING_SHORT_ADDRESSES
|
|
#define NRF_802154_PENDING_SHORT_ADDRESSES 10
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_PENDING_EXTENDED_ADDRESSES
|
|
*
|
|
* The number of slots containing extended addresses of nodes for which the pending data is stored.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_PENDING_EXTENDED_ADDRESSES
|
|
#define NRF_802154_PENDING_EXTENDED_ADDRESSES 10
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_RX_BUFFERS
|
|
*
|
|
* The number of buffers in the receive queue.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_RX_BUFFERS
|
|
#define NRF_802154_RX_BUFFERS 16
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_DISABLE_BCC_MATCHING
|
|
*
|
|
* Setting this flag disables NRF_RADIO_EVENT_BCMATCH handling, and therefore the address filtering
|
|
* during the frame reception. With this flag set to 1, the address filtering is done after
|
|
* receiving a frame, during NRF_RADIO_EVENT_END handling.
|
|
*
|
|
* @note This option is incompatible with antenna diversity. If set to 1, antenna diversity
|
|
* must not be used.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_DISABLE_BCC_MATCHING
|
|
#define NRF_802154_DISABLE_BCC_MATCHING 0
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_NOTIFY_CRCERROR
|
|
*
|
|
* With this flag set to 1, the CRC errors are notified to upper layers. This requires an interrupt
|
|
* handler to be used.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_NOTIFY_CRCERROR
|
|
#define NRF_802154_NOTIFY_CRCERROR 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_FRAME_TIMESTAMP_ENABLED
|
|
*
|
|
* If timestamps are to be added to the frames received.
|
|
* Enabling this feature enables the functions @ref nrf_802154_received_timestamp_raw,
|
|
* @ref nrf_802154_received_timestamp which add timestamps to the frames received.
|
|
* Enables also proper value of frame timestamp
|
|
* ( @c nrf_802154_transmit_done_metadata_t::data.transmitted.time ) passed as metadata to
|
|
* @ref nrf_802154_transmitted and @ref nrf_802154_transmitted_raw,
|
|
* This option also enables timestamping in stats.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_FRAME_TIMESTAMP_ENABLED
|
|
#define NRF_802154_FRAME_TIMESTAMP_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_TOTAL_TIMES_MEASUREMENT_ENABLED
|
|
*
|
|
* If measurement of total time spent in certain states is to be calculated.
|
|
*
|
|
* This option can be enabled when @ref NRF_802154_FRAME_TIMESTAMP_ENABLED is 1
|
|
* and @ref NRF_802154_DISABLE_BCC_MATCHING is 0.
|
|
*/
|
|
#ifndef NRF_802154_TOTAL_TIMES_MEASUREMENT_ENABLED
|
|
#define NRF_802154_TOTAL_TIMES_MEASUREMENT_ENABLED \
|
|
(1 && NRF_802154_FRAME_TIMESTAMP_ENABLED && !NRF_802154_DISABLE_BCC_MATCHING)
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_DELAYED_TRX_ENABLED
|
|
*
|
|
* If the delayed transmission and the receive window features are available.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_DELAYED_TRX_ENABLED
|
|
#define NRF_802154_DELAYED_TRX_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_csma CSMA/CA procedure configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_CSMA_CA_ENABLED
|
|
*
|
|
* If CSMA-CA is to be enabled by the driver. Disabling CSMA-CA improves
|
|
* the driver performance.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_CSMA_CA_ENABLED
|
|
#define NRF_802154_CSMA_CA_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CSMA_CA_MIN_BE_DEFAULT
|
|
*
|
|
* The default minimum value of the backoff exponent (BE) in the CSMA-CA algorithm
|
|
* (see IEEE 802.15.4-2015: 6.2.5.1).
|
|
*
|
|
* @note The minimum value of the backoff exponent may be changed from default by calling the
|
|
* @ref nrf_802154_csma_ca_min_be_set function.
|
|
*
|
|
*/
|
|
#ifdef NRF_802154_CSMA_CA_MIN_BE
|
|
#error "NRF_802154_CSMA_CA_MIN_BE was replaced with NRF_802154_CSMA_CA_MIN_BE_DEFAULT"
|
|
#endif
|
|
#ifndef NRF_802154_CSMA_CA_MIN_BE_DEFAULT
|
|
#define NRF_802154_CSMA_CA_MIN_BE_DEFAULT 3
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CSMA_CA_MAX_BE_DEFAULT
|
|
*
|
|
* The default maximum value of the backoff exponent, BE, in the CSMA-CA algorithm
|
|
* (see IEEE 802.15.4-2015: 6.2.5.1).
|
|
*
|
|
* @note The maximum value of the backoff exponent may be changed from default by calling the
|
|
* @ref nrf_802154_csma_ca_max_be_set function.
|
|
*
|
|
*/
|
|
#ifdef NRF_802154_CSMA_CA_MAX_BE
|
|
#error "NRF_802154_CSMA_CA_MAX_BE was replaced with NRF_802154_CSMA_CA_MAX_BE_DEFAULT"
|
|
#endif
|
|
#ifndef NRF_802154_CSMA_CA_MAX_BE_DEFAULT
|
|
#define NRF_802154_CSMA_CA_MAX_BE_DEFAULT 5
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS_DEFAULT
|
|
*
|
|
* The default maximum number of backoffs that the CSMA-CA algorithm will attempt before declaring
|
|
* a channel access failure.
|
|
*
|
|
* @note The maximum number of backoffs may be changed from default by calling the
|
|
* @ref nrf_802154_csma_ca_max_backoffs_set function.
|
|
*
|
|
*/
|
|
#ifdef NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS
|
|
#error \
|
|
"NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS was replaced with NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS_DEFAULT"
|
|
#endif
|
|
#ifndef NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS_DEFAULT
|
|
#define NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS_DEFAULT 4
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT
|
|
*
|
|
* Indicates whether the CSMA-CA algorithm waits for an available timeslot before it performs
|
|
* the CCA procedure.
|
|
*
|
|
* @note When this option is enabled, the CSMA-CA procedure can be synchronized with timeslots of
|
|
* other protocols. This decreases the robustness of the CSMA-CA procedure. On the other hand,
|
|
* enabling this function increases the performance of multi-protocol applications, especially
|
|
* when protocols other than 802.15.4 use much of the radio time (like the BLE scanning
|
|
* operation).
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT
|
|
#define NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT 1
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_timeout ACK timeout feature configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_ACK_TIMEOUT_ENABLED
|
|
*
|
|
* Indicates whether the ACK timeout feature is to be enabled in the driver.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_ACK_TIMEOUT_ENABLED
|
|
#define NRF_802154_ACK_TIMEOUT_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
|
|
*
|
|
* The default timeout in microseconds (us) for the ACK timeout feature.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
|
|
#define NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT 7000
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT
|
|
*
|
|
* The default timeout in microseconds (us) for the precise ACK timeout feature.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT
|
|
#define NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT 210
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_MAX_ACK_IE_SIZE
|
|
*
|
|
* The maximum supported size of the 802.15.4-2015 IE header and content fields in an Enh-Ack.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_MAX_ACK_IE_SIZE
|
|
#define NRF_802154_MAX_ACK_IE_SIZE 8
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_ifs Interframe spacing feature configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_IFS_ENABLED
|
|
*
|
|
* Indicates whether the Short/Long Interframe spacing feature is to be enabled in the driver.
|
|
*
|
|
*/
|
|
#ifndef NRF_802154_IFS_ENABLED
|
|
#define NRF_802154_IFS_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_transmission Transmission start notification feature configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_TX_STARTED_NOTIFY_ENABLED
|
|
*
|
|
* Indicates whether the notifications of the started transmissions are to be enabled in the driver.
|
|
*
|
|
* @note This feature is enabled by default if the ACK timeout feature or CSMA-CA is enabled.
|
|
* These features depend on the notifications of the transmission start.
|
|
*/
|
|
#ifndef NRF_802154_TX_STARTED_NOTIFY_ENABLED
|
|
#if NRF_802154_ACK_TIMEOUT_ENABLED || NRF_802154_CSMA_CA_ENABLED
|
|
#define NRF_802154_TX_STARTED_NOTIFY_ENABLED 1
|
|
#else
|
|
#define NRF_802154_TX_STARTED_NOTIFY_ENABLED 0
|
|
#endif
|
|
#endif // NRF_802154_TX_STARTED_NOTIFY_ENABLED
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_coex WiFi coexistence feature configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_COEX_INITIALLY_ENABLED
|
|
*
|
|
* Configures if WiFi coex is initially enabled or disabled.
|
|
*/
|
|
#ifndef NRF_802154_COEX_INITIALLY_ENABLED
|
|
#define NRF_802154_COEX_INITIALLY_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_stats Statistics configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_STATS_COUNT_ENERGY_DETECTED_EVENTS
|
|
*
|
|
* Configures if energy detected events will be counted in receive mode.
|
|
* When this option is enabled additional interrupts on energy detected events will occur
|
|
* increasing power consumption. The events counter is stored in
|
|
* @ref nrf_802154_stat_counters_t::received_energy_events field and can be retrieved by
|
|
* a call to @ref nrf_802154_stats_get or @ref nrf_802154_stat_counters_get.
|
|
*/
|
|
#ifndef NRF_802154_STATS_COUNT_ENERGY_DETECTED_EVENTS
|
|
#define NRF_802154_STATS_COUNT_ENERGY_DETECTED_EVENTS 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_STATS_COUNT_RECEIVED_PREAMBLES
|
|
*
|
|
* Configures if number of received preambles will be counted in receive mode.
|
|
* When this option is enabled additional interrupts on preamble reveived will occur
|
|
* increasing power consumption. The events counter is stored in
|
|
* @ref nrf_802154_stat_counters_t::received_preambles field and can be retrieved by
|
|
* a call to @ref nrf_802154_stats_get or @ref nrf_802154_stat_counters_get.
|
|
*/
|
|
#ifndef NRF_802154_STATS_COUNT_RECEIVED_PREAMBLES
|
|
#define NRF_802154_STATS_COUNT_RECEIVED_PREAMBLES 1
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_config_security Security configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_SECURITY_KEY_STORAGE_SIZE
|
|
*
|
|
* Configures the number of keys which are available in the Key Storage.
|
|
* This configuration is implementation-independent.
|
|
*/
|
|
#ifndef NRF_802154_SECURITY_KEY_STORAGE_SIZE
|
|
#define NRF_802154_SECURITY_KEY_STORAGE_SIZE 3
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_SECURITY_WRITER_ENABLED
|
|
*
|
|
* Enables the Security Writer module. The module parses the frame being transmitted, validates
|
|
* frame's security header and injects frame counter associated with the used key.
|
|
*/
|
|
#ifndef NRF_802154_SECURITY_WRITER_ENABLED
|
|
#define NRF_802154_SECURITY_WRITER_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_ENCRYPTION_ENABLED
|
|
*
|
|
* Enables the frame encryption module. The module uses AES-CCM* algorithm to secure frames
|
|
* transmitted by the driver.
|
|
*/
|
|
#ifndef NRF_802154_ENCRYPTION_ENABLED
|
|
#define NRF_802154_ENCRYPTION_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @}
|
|
* @defgroup nrf_802154_ie Information Elements configuration
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @def NRF_802154_IE_WRITER_ENABLED
|
|
*
|
|
* Enables the Information Element writer module. The module parses frames being transmitted
|
|
* for known Information Element IDs. If such elements are found, the writer module shall
|
|
* fill the elements with appropriate data.
|
|
*/
|
|
#ifndef NRF_802154_IE_WRITER_ENABLED
|
|
#define NRF_802154_IE_WRITER_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
* @def NRF_802154_CARRIER_FUNCTIONS_ENABLED
|
|
*
|
|
* Enables functions used for test purposes: nrf_802154_continuous_carrier and
|
|
* nrf_802154_modulated_carrier
|
|
*/
|
|
#ifndef NRF_802154_CARRIER_FUNCTIONS_ENABLED
|
|
#define NRF_802154_CARRIER_FUNCTIONS_ENABLED 1
|
|
#endif
|
|
|
|
/**
|
|
*@}
|
|
**/
|
|
|
|
/**
|
|
*@}
|
|
**/
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // NRF_802154_CONFIG_H__
|