105 lines
3.2 KiB
C
105 lines
3.2 KiB
C
/* Touch Pad Interrupt Example
|
|
|
|
This example code is in the Public Domain (or CC0 licensed, at your option.)
|
|
|
|
Unless required by applicable law or agreed to in writing, this
|
|
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
CONDITIONS OF ANY KIND, either express or implied.
|
|
*/
|
|
#include <stdio.h>
|
|
#include "freertos/FreeRTOS.h"
|
|
#include "freertos/task.h"
|
|
#include "esp_log.h"
|
|
|
|
#include "driver/touch_pad.h"
|
|
#include "soc/rtc_cntl_reg.h"
|
|
#include "soc/sens_reg.h"
|
|
|
|
static const char* TAG = "Touch pad";
|
|
|
|
static bool s_pad_activated[TOUCH_PAD_MAX];
|
|
|
|
|
|
/*
|
|
Read values sensed at all available touch pads.
|
|
Use half of read value as the threshold
|
|
to trigger interrupt when the pad is touched.
|
|
Note: this routine demonstrates a simple way
|
|
to configure activation threshold for the touch pads.
|
|
Do not touch any pads when this routine
|
|
is running (on application start).
|
|
*/
|
|
static void tp_example_set_thresholds(void)
|
|
{
|
|
uint16_t touch_value;
|
|
for (int i=0; i<TOUCH_PAD_MAX; i++) {
|
|
ESP_ERROR_CHECK(touch_pad_read(i, &touch_value));
|
|
ESP_ERROR_CHECK(touch_pad_config(i, touch_value/2));
|
|
}
|
|
}
|
|
|
|
/*
|
|
Check if any of touch pads has been activated
|
|
by reading a table updated by rtc_intr()
|
|
If so, then print it out on a serial monitor.
|
|
Clear related entry in the table afterwards
|
|
*/
|
|
static void tp_example_read_task(void *pvParameter)
|
|
{
|
|
static int show_message;
|
|
while (1) {
|
|
for (int i=0; i<TOUCH_PAD_MAX; i++) {
|
|
if (s_pad_activated[i] == true) {
|
|
ESP_LOGI(TAG, "T%d activated!", i);
|
|
// Wait a while for the pad being released
|
|
vTaskDelay(200 / portTICK_PERIOD_MS);
|
|
// Clear information on pad activation
|
|
s_pad_activated[i] = false;
|
|
// Reset the counter triggering a message
|
|
// that application is running
|
|
show_message = 1;
|
|
}
|
|
}
|
|
// If no pad is touched, every couple of seconds, show a message
|
|
// that application is running
|
|
if (show_message++ % 500 == 0) {
|
|
ESP_LOGI(TAG, "Waiting for any pad being touched...");
|
|
}
|
|
vTaskDelay(10 / portTICK_PERIOD_MS);
|
|
}
|
|
}
|
|
|
|
/*
|
|
Handle an interrupt triggered when a pad is touched.
|
|
Recognize what pad has been touched and save it in a table.
|
|
*/
|
|
static void tp_example_rtc_intr(void * arg)
|
|
{
|
|
uint32_t pad_intr = READ_PERI_REG(SENS_SAR_TOUCH_CTRL2_REG) & 0x3ff;
|
|
uint32_t rtc_intr = READ_PERI_REG(RTC_CNTL_INT_ST_REG);
|
|
//clear interrupt
|
|
WRITE_PERI_REG(RTC_CNTL_INT_CLR_REG, rtc_intr);
|
|
SET_PERI_REG_MASK(SENS_SAR_TOUCH_CTRL2_REG, SENS_TOUCH_MEAS_EN_CLR);
|
|
|
|
if (rtc_intr & RTC_CNTL_TOUCH_INT_ST) {
|
|
for (int i = 0; i < TOUCH_PAD_MAX; i++) {
|
|
if ((pad_intr >> i) & 0x01) {
|
|
s_pad_activated[i] = true;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
void app_main()
|
|
{
|
|
// Initialize touch pad peripheral
|
|
ESP_LOGI(TAG, "Initializing touch pad");
|
|
touch_pad_init();
|
|
tp_example_set_thresholds();
|
|
touch_pad_isr_handler_register(tp_example_rtc_intr, NULL, 0, NULL);
|
|
|
|
// Start a task to show what pads have been touched
|
|
xTaskCreate(&tp_example_read_task, "touch_pad_read_task", 2048, NULL, 5, NULL);
|
|
}
|