/*------------------------------------------------------------------------- * * clog.c * PostgreSQL transaction-commit-log manager * * This module replaces the old "pg_log" access code, which treated pg_log * essentially like a relation, in that it went through the regular buffer * manager. The problem with that was that there wasn't any good way to * recycle storage space for transactions so old that they'll never be * looked up again. Now we use specialized access code so that the commit * log can be broken into relatively small, independent segments. * * XLOG interactions: this module generates an XLOG record whenever a new * CLOG page is initialized to zeroes. Other writes of CLOG come from * recording of transaction commit or abort in xact.c, which generates its * own XLOG records for these events and will re-perform the status update * on redo; so we need make no additional XLOG entry here. For synchronous * transaction commits, the XLOG is guaranteed flushed through the XLOG commit * record before we are called to log a commit, so the WAL rule "write xlog * before data" is satisfied automatically. However, for async commits we * must track the latest LSN affecting each CLOG page, so that we can flush * XLOG that far and satisfy the WAL rule. We don't have to worry about this * for aborts (whether sync or async), since the post-crash assumption would * be that such transactions failed anyway. * * Portions Copyright (c) 1996-2020, PostgreSQL Global Development Group * Portions Copyright (c) 1994, Regents of the University of California * * src/backend/access/transam/clog.c * *------------------------------------------------------------------------- */ #include "postgres.h" #include "access/clog.h" #include "access/slru.h" #include "access/transam.h" #include "access/xlog.h" #include "access/xloginsert.h" #include "access/xlogutils.h" #include "miscadmin.h" #include "pg_trace.h" #include "pgstat.h" #include "storage/proc.h" #include "storage/sync.h" /* * Defines for CLOG page sizes. A page is the same BLCKSZ as is used * everywhere else in Postgres. * * Note: because TransactionIds are 32 bits and wrap around at 0xFFFFFFFF, * CLOG page numbering also wraps around at 0xFFFFFFFF/CLOG_XACTS_PER_PAGE, * and CLOG segment numbering at * 0xFFFFFFFF/CLOG_XACTS_PER_PAGE/SLRU_PAGES_PER_SEGMENT. We need take no * explicit notice of that fact in this module, except when comparing segment * and page numbers in TruncateCLOG (see CLOGPagePrecedes). */ /* We need two bits per xact, so four xacts fit in a byte */ #define CLOG_BITS_PER_XACT 2 #define CLOG_XACTS_PER_BYTE 4 #define CLOG_XACTS_PER_PAGE (BLCKSZ * CLOG_XACTS_PER_BYTE) #define CLOG_XACT_BITMASK ((1 << CLOG_BITS_PER_XACT) - 1) #define TransactionIdToPage(xid) ((xid) / (TransactionId) CLOG_XACTS_PER_PAGE) #define TransactionIdToPgIndex(xid) ((xid) % (TransactionId) CLOG_XACTS_PER_PAGE) #define TransactionIdToByte(xid) (TransactionIdToPgIndex(xid) / CLOG_XACTS_PER_BYTE) #define TransactionIdToBIndex(xid) ((xid) % (TransactionId) CLOG_XACTS_PER_BYTE) /* We store the latest async LSN for each group of transactions */ #define CLOG_XACTS_PER_LSN_GROUP 32 /* keep this a power of 2 */ #define CLOG_LSNS_PER_PAGE (CLOG_XACTS_PER_PAGE / CLOG_XACTS_PER_LSN_GROUP) #define GetLSNIndex(slotno, xid) ((slotno) * CLOG_LSNS_PER_PAGE + \ ((xid) % (TransactionId) CLOG_XACTS_PER_PAGE) / CLOG_XACTS_PER_LSN_GROUP) /* * The number of subtransactions below which we consider to apply clog group * update optimization. Testing reveals that the number higher than this can * hurt performance. */ #define THRESHOLD_SUBTRANS_CLOG_OPT 5 /* * Link to shared-memory data structures for CLOG control */ static SlruCtlData XactCtlData; #define XactCtl (&XactCtlData) static int ZeroCLOGPage(int pageno, bool writeXlog); static bool CLOGPagePrecedes(int page1, int page2); static void WriteZeroPageXlogRec(int pageno); static void WriteTruncateXlogRec(int pageno, TransactionId oldestXact, Oid oldestXactDb); static void TransactionIdSetPageStatus(TransactionId xid, int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn, int pageno, bool all_xact_same_page); static void TransactionIdSetStatusBit(TransactionId xid, XidStatus status, XLogRecPtr lsn, int slotno); static void set_status_by_pages(int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn); static bool TransactionGroupUpdateXidStatus(TransactionId xid, XidStatus status, XLogRecPtr lsn, int pageno); static void TransactionIdSetPageStatusInternal(TransactionId xid, int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn, int pageno); /* * TransactionIdSetTreeStatus * * Record the final state of transaction entries in the commit log for * a transaction and its subtransaction tree. Take care to ensure this is * efficient, and as atomic as possible. * * xid is a single xid to set status for. This will typically be * the top level transactionid for a top level commit or abort. It can * also be a subtransaction when we record transaction aborts. * * subxids is an array of xids of length nsubxids, representing subtransactions * in the tree of xid. In various cases nsubxids may be zero. * * lsn must be the WAL location of the commit record when recording an async * commit. For a synchronous commit it can be InvalidXLogRecPtr, since the * caller guarantees the commit record is already flushed in that case. It * should be InvalidXLogRecPtr for abort cases, too. * * In the commit case, atomicity is limited by whether all the subxids are in * the same CLOG page as xid. If they all are, then the lock will be grabbed * only once, and the status will be set to committed directly. Otherwise * we must * 1. set sub-committed all subxids that are not on the same page as the * main xid * 2. atomically set committed the main xid and the subxids on the same page * 3. go over the first bunch again and set them committed * Note that as far as concurrent checkers are concerned, main transaction * commit as a whole is still atomic. * * Example: * TransactionId t commits and has subxids t1, t2, t3, t4 * t is on page p1, t1 is also on p1, t2 and t3 are on p2, t4 is on p3 * 1. update pages2-3: * page2: set t2,t3 as sub-committed * page3: set t4 as sub-committed * 2. update page1: * set t1 as sub-committed, * then set t as committed, then set t1 as committed * 3. update pages2-3: * page2: set t2,t3 as committed * page3: set t4 as committed * * NB: this is a low-level routine and is NOT the preferred entry point * for most uses; functions in transam.c are the intended callers. * * XXX Think about issuing POSIX_FADV_WILLNEED on pages that we will need, * but aren't yet in cache, as well as hinting pages not to fall out of * cache yet. */ void TransactionIdSetTreeStatus(TransactionId xid, int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn) { int pageno = TransactionIdToPage(xid); /* get page of parent */ int i; Assert(status == TRANSACTION_STATUS_COMMITTED || status == TRANSACTION_STATUS_ABORTED); /* * See how many subxids, if any, are on the same page as the parent, if * any. */ for (i = 0; i < nsubxids; i++) { if (TransactionIdToPage(subxids[i]) != pageno) break; } /* * Do all items fit on a single page? */ if (i == nsubxids) { /* * Set the parent and all subtransactions in a single call */ TransactionIdSetPageStatus(xid, nsubxids, subxids, status, lsn, pageno, true); } else { int nsubxids_on_first_page = i; /* * If this is a commit then we care about doing this correctly (i.e. * using the subcommitted intermediate status). By here, we know * we're updating more than one page of clog, so we must mark entries * that are *not* on the first page so that they show as subcommitted * before we then return to update the status to fully committed. * * To avoid touching the first page twice, skip marking subcommitted * for the subxids on that first page. */ if (status == TRANSACTION_STATUS_COMMITTED) set_status_by_pages(nsubxids - nsubxids_on_first_page, subxids + nsubxids_on_first_page, TRANSACTION_STATUS_SUB_COMMITTED, lsn); /* * Now set the parent and subtransactions on same page as the parent, * if any */ pageno = TransactionIdToPage(xid); TransactionIdSetPageStatus(xid, nsubxids_on_first_page, subxids, status, lsn, pageno, false); /* * Now work through the rest of the subxids one clog page at a time, * starting from the second page onwards, like we did above. */ set_status_by_pages(nsubxids - nsubxids_on_first_page, subxids + nsubxids_on_first_page, status, lsn); } } /* * Helper for TransactionIdSetTreeStatus: set the status for a bunch of * transactions, chunking in the separate CLOG pages involved. We never * pass the whole transaction tree to this function, only subtransactions * that are on different pages to the top level transaction id. */ static void set_status_by_pages(int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn) { int pageno = TransactionIdToPage(subxids[0]); int offset = 0; int i = 0; Assert(nsubxids > 0); /* else the pageno fetch above is unsafe */ while (i < nsubxids) { int num_on_page = 0; int nextpageno; do { nextpageno = TransactionIdToPage(subxids[i]); if (nextpageno != pageno) break; num_on_page++; i++; } while (i < nsubxids); TransactionIdSetPageStatus(InvalidTransactionId, num_on_page, subxids + offset, status, lsn, pageno, false); offset = i; pageno = nextpageno; } } /* * Record the final state of transaction entries in the commit log for all * entries on a single page. Atomic only on this page. */ static void TransactionIdSetPageStatus(TransactionId xid, int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn, int pageno, bool all_xact_same_page) { /* Can't use group update when PGPROC overflows. */ StaticAssertStmt(THRESHOLD_SUBTRANS_CLOG_OPT <= PGPROC_MAX_CACHED_SUBXIDS, "group clog threshold less than PGPROC cached subxids"); /* * When there is contention on XactSLRULock, we try to group multiple * updates; a single leader process will perform transaction status * updates for multiple backends so that the number of times XactSLRULock * needs to be acquired is reduced. * * For this optimization to be safe, the XID and subxids in MyProc must be * the same as the ones for which we're setting the status. Check that * this is the case. * * For this optimization to be efficient, we shouldn't have too many * sub-XIDs and all of the XIDs for which we're adjusting clog should be * on the same page. Check those conditions, too. */ if (all_xact_same_page && xid == MyProc->xid && nsubxids <= THRESHOLD_SUBTRANS_CLOG_OPT && nsubxids == MyProc->subxidStatus.count && memcmp(subxids, MyProc->subxids.xids, nsubxids * sizeof(TransactionId)) == 0) { /* * If we can immediately acquire XactSLRULock, we update the status of * our own XID and release the lock. If not, try use group XID * update. If that doesn't work out, fall back to waiting for the * lock to perform an update for this transaction only. */ if (LWLockConditionalAcquire(XactSLRULock, LW_EXCLUSIVE)) { /* Got the lock without waiting! Do the update. */ TransactionIdSetPageStatusInternal(xid, nsubxids, subxids, status, lsn, pageno); LWLockRelease(XactSLRULock); return; } else if (TransactionGroupUpdateXidStatus(xid, status, lsn, pageno)) { /* Group update mechanism has done the work. */ return; } /* Fall through only if update isn't done yet. */ } /* Group update not applicable, or couldn't accept this page number. */ LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); TransactionIdSetPageStatusInternal(xid, nsubxids, subxids, status, lsn, pageno); LWLockRelease(XactSLRULock); } /* * Record the final state of transaction entry in the commit log * * We don't do any locking here; caller must handle that. */ static void TransactionIdSetPageStatusInternal(TransactionId xid, int nsubxids, TransactionId *subxids, XidStatus status, XLogRecPtr lsn, int pageno) { int slotno; int i; Assert(status == TRANSACTION_STATUS_COMMITTED || status == TRANSACTION_STATUS_ABORTED || (status == TRANSACTION_STATUS_SUB_COMMITTED && !TransactionIdIsValid(xid))); Assert(LWLockHeldByMeInMode(XactSLRULock, LW_EXCLUSIVE)); /* * If we're doing an async commit (ie, lsn is valid), then we must wait * for any active write on the page slot to complete. Otherwise our * update could reach disk in that write, which will not do since we * mustn't let it reach disk until we've done the appropriate WAL flush. * But when lsn is invalid, it's OK to scribble on a page while it is * write-busy, since we don't care if the update reaches disk sooner than * we think. */ slotno = SimpleLruReadPage(XactCtl, pageno, XLogRecPtrIsInvalid(lsn), xid); /* * Set the main transaction id, if any. * * If we update more than one xid on this page while it is being written * out, we might find that some of the bits go to disk and others don't. * If we are updating commits on the page with the top-level xid that * could break atomicity, so we subcommit the subxids first before we mark * the top-level commit. */ if (TransactionIdIsValid(xid)) { /* Subtransactions first, if needed ... */ if (status == TRANSACTION_STATUS_COMMITTED) { for (i = 0; i < nsubxids; i++) { Assert(XactCtl->shared->page_number[slotno] == TransactionIdToPage(subxids[i])); TransactionIdSetStatusBit(subxids[i], TRANSACTION_STATUS_SUB_COMMITTED, lsn, slotno); } } /* ... then the main transaction */ TransactionIdSetStatusBit(xid, status, lsn, slotno); } /* Set the subtransactions */ for (i = 0; i < nsubxids; i++) { Assert(XactCtl->shared->page_number[slotno] == TransactionIdToPage(subxids[i])); TransactionIdSetStatusBit(subxids[i], status, lsn, slotno); } XactCtl->shared->page_dirty[slotno] = true; } /* * When we cannot immediately acquire XactSLRULock in exclusive mode at * commit time, add ourselves to a list of processes that need their XIDs * status update. The first process to add itself to the list will acquire * XactSLRULock in exclusive mode and set transaction status as required * on behalf of all group members. This avoids a great deal of contention * around XactSLRULock when many processes are trying to commit at once, * since the lock need not be repeatedly handed off from one committing * process to the next. * * Returns true when transaction status has been updated in clog; returns * false if we decided against applying the optimization because the page * number we need to update differs from those processes already waiting. */ static bool TransactionGroupUpdateXidStatus(TransactionId xid, XidStatus status, XLogRecPtr lsn, int pageno) { volatile PROC_HDR *procglobal = ProcGlobal; PGPROC *proc = MyProc; uint32 nextidx; uint32 wakeidx; /* We should definitely have an XID whose status needs to be updated. */ Assert(TransactionIdIsValid(xid)); /* * Add ourselves to the list of processes needing a group XID status * update. */ proc->clogGroupMember = true; proc->clogGroupMemberXid = xid; proc->clogGroupMemberXidStatus = status; proc->clogGroupMemberPage = pageno; proc->clogGroupMemberLsn = lsn; nextidx = pg_atomic_read_u32(&procglobal->clogGroupFirst); while (true) { /* * Add the proc to list, if the clog page where we need to update the * current transaction status is same as group leader's clog page. * * There is a race condition here, which is that after doing the below * check and before adding this proc's clog update to a group, the * group leader might have already finished the group update for this * page and becomes group leader of another group. This will lead to a * situation where a single group can have different clog page * updates. This isn't likely and will still work, just maybe a bit * less efficiently. */ if (nextidx != INVALID_PGPROCNO && ProcGlobal->allProcs[nextidx].clogGroupMemberPage != proc->clogGroupMemberPage) { proc->clogGroupMember = false; return false; } pg_atomic_write_u32(&proc->clogGroupNext, nextidx); if (pg_atomic_compare_exchange_u32(&procglobal->clogGroupFirst, &nextidx, (uint32) proc->pgprocno)) break; } /* * If the list was not empty, the leader will update the status of our * XID. It is impossible to have followers without a leader because the * first process that has added itself to the list will always have * nextidx as INVALID_PGPROCNO. */ if (nextidx != INVALID_PGPROCNO) { int extraWaits = 0; /* Sleep until the leader updates our XID status. */ pgstat_report_wait_start(WAIT_EVENT_XACT_GROUP_UPDATE); for (;;) { /* acts as a read barrier */ PGSemaphoreLock(proc->sem); if (!proc->clogGroupMember) break; extraWaits++; } pgstat_report_wait_end(); Assert(pg_atomic_read_u32(&proc->clogGroupNext) == INVALID_PGPROCNO); /* Fix semaphore count for any absorbed wakeups */ while (extraWaits-- > 0) PGSemaphoreUnlock(proc->sem); return true; } /* We are the leader. Acquire the lock on behalf of everyone. */ LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); /* * Now that we've got the lock, clear the list of processes waiting for * group XID status update, saving a pointer to the head of the list. * Trying to pop elements one at a time could lead to an ABA problem. */ nextidx = pg_atomic_exchange_u32(&procglobal->clogGroupFirst, INVALID_PGPROCNO); /* Remember head of list so we can perform wakeups after dropping lock. */ wakeidx = nextidx; /* Walk the list and update the status of all XIDs. */ while (nextidx != INVALID_PGPROCNO) { PGPROC *proc = &ProcGlobal->allProcs[nextidx]; /* * Transactions with more than THRESHOLD_SUBTRANS_CLOG_OPT sub-XIDs * should not use group XID status update mechanism. */ Assert(proc->subxidStatus.count <= THRESHOLD_SUBTRANS_CLOG_OPT); TransactionIdSetPageStatusInternal(proc->clogGroupMemberXid, proc->subxidStatus.count, proc->subxids.xids, proc->clogGroupMemberXidStatus, proc->clogGroupMemberLsn, proc->clogGroupMemberPage); /* Move to next proc in list. */ nextidx = pg_atomic_read_u32(&proc->clogGroupNext); } /* We're done with the lock now. */ LWLockRelease(XactSLRULock); /* * Now that we've released the lock, go back and wake everybody up. We * don't do this under the lock so as to keep lock hold times to a * minimum. */ while (wakeidx != INVALID_PGPROCNO) { PGPROC *proc = &ProcGlobal->allProcs[wakeidx]; wakeidx = pg_atomic_read_u32(&proc->clogGroupNext); pg_atomic_write_u32(&proc->clogGroupNext, INVALID_PGPROCNO); /* ensure all previous writes are visible before follower continues. */ pg_write_barrier(); proc->clogGroupMember = false; if (proc != MyProc) PGSemaphoreUnlock(proc->sem); } return true; } /* * Sets the commit status of a single transaction. * * Must be called with XactSLRULock held */ static void TransactionIdSetStatusBit(TransactionId xid, XidStatus status, XLogRecPtr lsn, int slotno) { int byteno = TransactionIdToByte(xid); int bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT; char *byteptr; char byteval; char curval; byteptr = XactCtl->shared->page_buffer[slotno] + byteno; curval = (*byteptr >> bshift) & CLOG_XACT_BITMASK; /* * When replaying transactions during recovery we still need to perform * the two phases of subcommit and then commit. However, some transactions * are already correctly marked, so we just treat those as a no-op which * allows us to keep the following Assert as restrictive as possible. */ if (InRecovery && status == TRANSACTION_STATUS_SUB_COMMITTED && curval == TRANSACTION_STATUS_COMMITTED) return; /* * Current state change should be from 0 or subcommitted to target state * or we should already be there when replaying changes during recovery. */ Assert(curval == 0 || (curval == TRANSACTION_STATUS_SUB_COMMITTED && status != TRANSACTION_STATUS_IN_PROGRESS) || curval == status); /* note this assumes exclusive access to the clog page */ byteval = *byteptr; byteval &= ~(((1 << CLOG_BITS_PER_XACT) - 1) << bshift); byteval |= (status << bshift); *byteptr = byteval; /* * Update the group LSN if the transaction completion LSN is higher. * * Note: lsn will be invalid when supplied during InRecovery processing, * so we don't need to do anything special to avoid LSN updates during * recovery. After recovery completes the next clog change will set the * LSN correctly. */ if (!XLogRecPtrIsInvalid(lsn)) { int lsnindex = GetLSNIndex(slotno, xid); if (XactCtl->shared->group_lsn[lsnindex] < lsn) XactCtl->shared->group_lsn[lsnindex] = lsn; } } /* * Interrogate the state of a transaction in the commit log. * * Aside from the actual commit status, this function returns (into *lsn) * an LSN that is late enough to be able to guarantee that if we flush up to * that LSN then we will have flushed the transaction's commit record to disk. * The result is not necessarily the exact LSN of the transaction's commit * record! For example, for long-past transactions (those whose clog pages * already migrated to disk), we'll return InvalidXLogRecPtr. Also, because * we group transactions on the same clog page to conserve storage, we might * return the LSN of a later transaction that falls into the same group. * * NB: this is a low-level routine and is NOT the preferred entry point * for most uses; TransactionLogFetch() in transam.c is the intended caller. */ XidStatus TransactionIdGetStatus(TransactionId xid, XLogRecPtr *lsn) { int pageno = TransactionIdToPage(xid); int byteno = TransactionIdToByte(xid); int bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT; int slotno; int lsnindex; char *byteptr; XidStatus status; /* lock is acquired by SimpleLruReadPage_ReadOnly */ slotno = SimpleLruReadPage_ReadOnly(XactCtl, pageno, xid); byteptr = XactCtl->shared->page_buffer[slotno] + byteno; status = (*byteptr >> bshift) & CLOG_XACT_BITMASK; lsnindex = GetLSNIndex(slotno, xid); *lsn = XactCtl->shared->group_lsn[lsnindex]; LWLockRelease(XactSLRULock); return status; } /* * Number of shared CLOG buffers. * * On larger multi-processor systems, it is possible to have many CLOG page * requests in flight at one time which could lead to disk access for CLOG * page if the required page is not found in memory. Testing revealed that we * can get the best performance by having 128 CLOG buffers, more than that it * doesn't improve performance. * * Unconditionally keeping the number of CLOG buffers to 128 did not seem like * a good idea, because it would increase the minimum amount of shared memory * required to start, which could be a problem for people running very small * configurations. The following formula seems to represent a reasonable * compromise: people with very low values for shared_buffers will get fewer * CLOG buffers as well, and everyone else will get 128. */ Size CLOGShmemBuffers(void) { return Min(128, Max(4, NBuffers / 512)); } /* * Initialization of shared memory for CLOG */ Size CLOGShmemSize(void) { return SimpleLruShmemSize(CLOGShmemBuffers(), CLOG_LSNS_PER_PAGE); } void CLOGShmemInit(void) { XactCtl->PagePrecedes = CLOGPagePrecedes; SimpleLruInit(XactCtl, "Xact", CLOGShmemBuffers(), CLOG_LSNS_PER_PAGE, XactSLRULock, "pg_xact", LWTRANCHE_XACT_BUFFER, SYNC_HANDLER_CLOG); } /* * This func must be called ONCE on system install. It creates * the initial CLOG segment. (The CLOG directory is assumed to * have been created by initdb, and CLOGShmemInit must have been * called already.) */ void BootStrapCLOG(void) { int slotno; LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); /* Create and zero the first page of the commit log */ slotno = ZeroCLOGPage(0, false); /* Make sure it's written out */ SimpleLruWritePage(XactCtl, slotno); Assert(!XactCtl->shared->page_dirty[slotno]); LWLockRelease(XactSLRULock); } /* * Initialize (or reinitialize) a page of CLOG to zeroes. * If writeXlog is true, also emit an XLOG record saying we did this. * * The page is not actually written, just set up in shared memory. * The slot number of the new page is returned. * * Control lock must be held at entry, and will be held at exit. */ static int ZeroCLOGPage(int pageno, bool writeXlog) { int slotno; slotno = SimpleLruZeroPage(XactCtl, pageno); if (writeXlog) WriteZeroPageXlogRec(pageno); return slotno; } /* * This must be called ONCE during postmaster or standalone-backend startup, * after StartupXLOG has initialized ShmemVariableCache->nextXid. */ void StartupCLOG(void) { TransactionId xid = XidFromFullTransactionId(ShmemVariableCache->nextXid); int pageno = TransactionIdToPage(xid); LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); /* * Initialize our idea of the latest page number. */ XactCtl->shared->latest_page_number = pageno; LWLockRelease(XactSLRULock); } /* * This must be called ONCE at the end of startup/recovery. */ void TrimCLOG(void) { TransactionId xid = XidFromFullTransactionId(ShmemVariableCache->nextXid); int pageno = TransactionIdToPage(xid); LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); /* * Re-Initialize our idea of the latest page number. */ XactCtl->shared->latest_page_number = pageno; /* * Zero out the remainder of the current clog page. Under normal * circumstances it should be zeroes already, but it seems at least * theoretically possible that XLOG replay will have settled on a nextXID * value that is less than the last XID actually used and marked by the * previous database lifecycle (since subtransaction commit writes clog * but makes no WAL entry). Let's just be safe. (We need not worry about * pages beyond the current one, since those will be zeroed when first * used. For the same reason, there is no need to do anything when * nextXid is exactly at a page boundary; and it's likely that the * "current" page doesn't exist yet in that case.) */ if (TransactionIdToPgIndex(xid) != 0) { int byteno = TransactionIdToByte(xid); int bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT; int slotno; char *byteptr; slotno = SimpleLruReadPage(XactCtl, pageno, false, xid); byteptr = XactCtl->shared->page_buffer[slotno] + byteno; /* Zero so-far-unused positions in the current byte */ *byteptr &= (1 << bshift) - 1; /* Zero the rest of the page */ MemSet(byteptr + 1, 0, BLCKSZ - byteno - 1); XactCtl->shared->page_dirty[slotno] = true; } LWLockRelease(XactSLRULock); } /* * Perform a checkpoint --- either during shutdown, or on-the-fly */ void CheckPointCLOG(void) { /* * Write dirty CLOG pages to disk. This may result in sync requests * queued for later handling by ProcessSyncRequests(), as part of the * checkpoint. */ TRACE_POSTGRESQL_CLOG_CHECKPOINT_START(true); SimpleLruWriteAll(XactCtl, true); TRACE_POSTGRESQL_CLOG_CHECKPOINT_DONE(true); } /* * Make sure that CLOG has room for a newly-allocated XID. * * NB: this is called while holding XidGenLock. We want it to be very fast * most of the time; even when it's not so fast, no actual I/O need happen * unless we're forced to write out a dirty clog or xlog page to make room * in shared memory. */ void ExtendCLOG(TransactionId newestXact) { int pageno; /* * No work except at first XID of a page. But beware: just after * wraparound, the first XID of page zero is FirstNormalTransactionId. */ if (TransactionIdToPgIndex(newestXact) != 0 && !TransactionIdEquals(newestXact, FirstNormalTransactionId)) return; pageno = TransactionIdToPage(newestXact); LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); /* Zero the page and make an XLOG entry about it */ ZeroCLOGPage(pageno, true); LWLockRelease(XactSLRULock); } /* * Remove all CLOG segments before the one holding the passed transaction ID * * Before removing any CLOG data, we must flush XLOG to disk, to ensure * that any recently-emitted FREEZE_PAGE records have reached disk; otherwise * a crash and restart might leave us with some unfrozen tuples referencing * removed CLOG data. We choose to emit a special TRUNCATE XLOG record too. * Replaying the deletion from XLOG is not critical, since the files could * just as well be removed later, but doing so prevents a long-running hot * standby server from acquiring an unreasonably bloated CLOG directory. * * Since CLOG segments hold a large number of transactions, the opportunity to * actually remove a segment is fairly rare, and so it seems best not to do * the XLOG flush unless we have confirmed that there is a removable segment. */ void TruncateCLOG(TransactionId oldestXact, Oid oldestxid_datoid) { int cutoffPage; /* * The cutoff point is the start of the segment containing oldestXact. We * pass the *page* containing oldestXact to SimpleLruTruncate. */ cutoffPage = TransactionIdToPage(oldestXact); /* Check to see if there's any files that could be removed */ if (!SlruScanDirectory(XactCtl, SlruScanDirCbReportPresence, &cutoffPage)) return; /* nothing to remove */ /* * Advance oldestClogXid before truncating clog, so concurrent xact status * lookups can ensure they don't attempt to access truncated-away clog. * * It's only necessary to do this if we will actually truncate away clog * pages. */ AdvanceOldestClogXid(oldestXact); /* * Write XLOG record and flush XLOG to disk. We record the oldest xid * we're keeping information about here so we can ensure that it's always * ahead of clog truncation in case we crash, and so a standby finds out * the new valid xid before the next checkpoint. */ WriteTruncateXlogRec(cutoffPage, oldestXact, oldestxid_datoid); /* Now we can remove the old CLOG segment(s) */ SimpleLruTruncate(XactCtl, cutoffPage); } /* * Decide which of two CLOG page numbers is "older" for truncation purposes. * * We need to use comparison of TransactionIds here in order to do the right * thing with wraparound XID arithmetic. However, if we are asked about * page number zero, we don't want to hand InvalidTransactionId to * TransactionIdPrecedes: it'll get weird about permanent xact IDs. So, * offset both xids by FirstNormalTransactionId to avoid that. */ static bool CLOGPagePrecedes(int page1, int page2) { TransactionId xid1; TransactionId xid2; xid1 = ((TransactionId) page1) * CLOG_XACTS_PER_PAGE; xid1 += FirstNormalTransactionId; xid2 = ((TransactionId) page2) * CLOG_XACTS_PER_PAGE; xid2 += FirstNormalTransactionId; return TransactionIdPrecedes(xid1, xid2); } /* * Write a ZEROPAGE xlog record */ static void WriteZeroPageXlogRec(int pageno) { XLogBeginInsert(); XLogRegisterData((char *) (&pageno), sizeof(int)); (void) XLogInsert(RM_CLOG_ID, CLOG_ZEROPAGE); } /* * Write a TRUNCATE xlog record * * We must flush the xlog record to disk before returning --- see notes * in TruncateCLOG(). */ static void WriteTruncateXlogRec(int pageno, TransactionId oldestXact, Oid oldestXactDb) { XLogRecPtr recptr; xl_clog_truncate xlrec; xlrec.pageno = pageno; xlrec.oldestXact = oldestXact; xlrec.oldestXactDb = oldestXactDb; XLogBeginInsert(); XLogRegisterData((char *) (&xlrec), sizeof(xl_clog_truncate)); recptr = XLogInsert(RM_CLOG_ID, CLOG_TRUNCATE); XLogFlush(recptr); } /* * CLOG resource manager's routines */ void clog_redo(XLogReaderState *record) { uint8 info = XLogRecGetInfo(record) & ~XLR_INFO_MASK; /* Backup blocks are not used in clog records */ Assert(!XLogRecHasAnyBlockRefs(record)); if (info == CLOG_ZEROPAGE) { int pageno; int slotno; memcpy(&pageno, XLogRecGetData(record), sizeof(int)); LWLockAcquire(XactSLRULock, LW_EXCLUSIVE); slotno = ZeroCLOGPage(pageno, false); SimpleLruWritePage(XactCtl, slotno); Assert(!XactCtl->shared->page_dirty[slotno]); LWLockRelease(XactSLRULock); } else if (info == CLOG_TRUNCATE) { xl_clog_truncate xlrec; memcpy(&xlrec, XLogRecGetData(record), sizeof(xl_clog_truncate)); /* * During XLOG replay, latest_page_number isn't set up yet; insert a * suitable value to bypass the sanity test in SimpleLruTruncate. */ XactCtl->shared->latest_page_number = xlrec.pageno; AdvanceOldestClogXid(xlrec.oldestXact); SimpleLruTruncate(XactCtl, xlrec.pageno); } else elog(PANIC, "clog_redo: unknown op code %u", info); } /* * Entrypoint for sync.c to sync clog files. */ int clogsyncfiletag(const FileTag *ftag, char *path) { return SlruSyncFileTag(XactCtl, ftag, path); }