These two new parameters, named sslminprotocolversion and
sslmaxprotocolversion, allow to respectively control the minimum and the
maximum version of the SSL protocol used for the SSL connection attempt.
The default setting is to allow any version for both the minimum and the
maximum bounds, causing libpq to rely on the bounds set by the backend
when negotiating the protocol to use for an SSL connection. The bounds
are checked when the values are set at the earliest stage possible as
this makes the checks independent of any SSL implementation.
Author: Daniel Gustafsson
Reviewed-by: Michael Paquier, Cary Huang
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
Fix assorted bugs in handling of non-blocking I/O when using GSSAPI
encryption. The encryption layer could return the wrong status
information to its caller, resulting in effectively dropping some data
(or possibly in aborting a not-broken connection), or in a "livelock"
situation where data remains to be sent but the upper layers think
transmission is done and just go to sleep. There were multiple small
thinkos contributing to that, as well as one big one (failure to think
through what to do when a send fails after having already transmitted
data). Note that these errors could cause failures whether the client
application asked for non-blocking I/O or not, since both libpq and
the backend always run things in non-block mode at this level.
Also get rid of use of static variables for GSSAPI inside libpq;
that's entirely not okay given that multiple connections could be
open at once inside a single client process.
Also adjust a bunch of random small discrepancies between the frontend
and backend versions of the send/receive functions -- except for error
handling, they should be identical, and now they are.
Also extend the Kerberos TAP tests to exercise cases where nontrivial
amounts of data need to be pushed through encryption. Before, those
tests didn't provide any useful coverage at all for the cases of
interest here. (They still might not, depending on timing, but at
least there's a chance.)
Per complaint from pmc@citylink and subsequent investigation.
Back-patch to v12 where this code was introduced.
Discussion: https://postgr.es/m/20200109181822.GA74698@gate.oper.dinoex.org
We realized years ago that it's better for libpq to accept all
connection parameters syntactically, even if some are ignored or
restricted due to lack of the feature in a particular build.
However, that lesson from the SSL support was for some reason never
applied to the GSSAPI support. This is causing various buildfarm
members to have problems with a test case added by commit 6136e94dc,
and it's just a bad idea from a user-experience standpoint anyway,
so fix it.
While at it, fix some places where parameter-related infrastructure
was added with the aid of a dartboard, or perhaps with the aid of
the anti-pattern "add new stuff at the end". It should be safe
to rearrange the contents of struct pg_conn even in released
branches, since that's private to libpq (and we'd have to move
some fields in some builds to fix this, anyway).
Back-patch to all supported branches.
Discussion: https://postgr.es/m/11297.1576868677@sss.pgh.pa.us
The getpeereid() uses have so far been protected by HAVE_UNIX_SOCKETS,
so they didn't ever care about Windows support. But in anticipation
of Unix-domain socket support on Windows, that needs to be handled
differently.
Windows doesn't support getpeereid() at this time, so we use the
existing not-supported code path. We let configure do its usual thing
of picking up the replacement from libpgport, instead of the custom
overrides that it was doing before.
But then Windows doesn't have struct passwd, so this patch sprinkles
some additional #ifdef WIN32 around to make it work. This is similar
to existing code that deals with this issue.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/5974caea-1267-7708-40f2-6009a9d653b0@2ndquadrant.com
This partially reverts commit 4dc6355210.
The information returned by the function can be obtained by calling
PQconninfo(), so the function is redundant.
This patch providies for support for password protected SSL client
keys in libpq, and for DER format keys, both encrypted and unencrypted.
There is a new connection parameter sslpassword, which is supplied to
the OpenSSL libraries via a callback function. The callback function can
also be set by an application by calling PQgetSSLKeyPassHook(). There is
also a function to retreive the connection setting, PQsslpassword().
Craig Ringer and Andrew Dunstan
Reviewed by: Greg Nancarrow
Discussion: https://postgr.es/m/f7ee88ed-95c4-95c1-d4bf-7b415363ab62@2ndQuadrant.com
A check was redundant. While on it, add an assertion to make sure that
the parsing routine is never called with a NULL input. All the code
paths currently calling the parsing routine are careful with NULL inputs
already, but future callers may forget that.
Reported-by: Peter Eisentraut, Lars Kanis
Discussion: https://postgr.es/m/ec64956b-4597-56b6-c3db-457d15250fe4@2ndquadrant.com
Backpatch-through: 12
The logic was correctly detecting a parsing failure, but the parsing
error did not get reported back to the client properly.
Reported-by: Ed Morley
Author: Lars Kanis
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
Commit e7a2217 has introduced stricter checks for integer values in
connection parameters for libpq. However this failed to correctly check
after trailing whitespaces, while leading whitespaces were discarded per
the use of strtol(3). This fixes and refactors the parsing logic to
handle both cases consistently. Note that trying to restrict the use of
trailing whitespaces can easily break connection strings like in ECPG
regression tests (these have allowed me to catch the parsing bug with
connect_timeout).
Author: Michael Paquier
Reviewed-by: Lars Kanis
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
There was some duplicate code to run SHOW transaction_read_only to
determine whether the server is read-write or read-only. Reduce it by
adding another state to the state machine.
Author: Hari Babu Kommi
Reviewed-by: Takayuki Tsunakawa, Álvaro Herrera
Discussion: https://postgr.es/m/CAJrrPGe_qgdbbN+yBgEVpd+YLHXXjTruzk6RmTMhqrFig+32ag@mail.gmail.com
Use the explicit_bzero() function in places where it is important that
security information such as passwords is cleared from memory. There
might be other places where it could be useful; this is just an
initial collection.
For platforms that don't have explicit_bzero(), provide various
fallback implementations. (explicit_bzero() itself isn't standard,
but as Linux/glibc, FreeBSD, and OpenBSD have it, it's the most common
spelling, so it makes sense to make that the invocation point.)
Discussion: https://www.postgresql.org/message-id/flat/42d26bde-5d5b-c90d-87ae-6cab875f73be%402ndquadrant.com
Prefix inet_net_ntop and sibling routines with "pg_" to ensure that
they aren't mistaken for C-library functions. This fixes warnings
from cpluspluscheck on some platforms, and should help reduce reader
confusion everywhere, since our functions aren't exactly interchangeable
with the library versions (they may have different ideas about address
family codes).
This shouldn't be fixing any actual bugs, unless somebody's linker
is misbehaving, so no need to back-patch.
Discussion: https://postgr.es/m/20518.1559494394@sss.pgh.pa.us
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
Fixes some problems introduced by 6e5f8d489acc:
* When reusing conninfo data from the previous connection in \connect,
the host address should only be reused if it was specified as
hostaddr; if it wasn't, then 'host' is resolved afresh. We were
reusing the same IP address, which ignores a possible DNS change
as well as any other addresses that the name resolves to than the
one that was used in the original connection.
* PQhost, PQhostaddr: Don't present user-specified hostaddr when we have
an inet_net_ntop-produced equivalent address. The latter has been
put in canonical format, which is cleaner (so it produces "127.0.0.1"
when given "host=2130706433", for example).
* Document the hostaddr-reusing aspect of \connect.
* Fix some code comments
Author: Fabien Coelho
Reported-by: Noah Misch
Discussion: https://postgr.es/m/20190527203713.GA58392@gust.leadboat.com
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
The GSSAPI encryption patch neglected to update the protocol
documentation to describe how to set up a GSSAPI encrypted connection
from a client to the server, so fix that by adding the appropriate
documentation to protocol.sgml.
The tests added for encryption support were overly long and couldn't be
run in parallel due to race conditions; this was largely because each
test was setting up its own KDC to perform the tests. Instead, merge
the authentication tests and the encryption tests into the original
test, where we only create one KDC to run the tests with. Also, have
the tests check what the server's opinion is of the connection and if it
was GSS authenticated or encrypted using the pg_stat_gssapi view.
In passing, fix the libpq label for GSSENC-Mode to be consistent with
the "PGGSSENCMODE" environment variable.
Missing protocol documentation pointed out by Michael Paquier.
Issues with the tests pointed out by Tom Lane and Peter Eisentraut.
Refactored tests and added documentation by me.
Reviewed by Robbie Harwood (protocol documentation) and Michael Paquier
(rework of the tests).
Similarly to the set of parameters for keepalive, a connection parameter
for libpq is added as well as a backend GUC, called tcp_user_timeout.
Increasing the TCP user timeout is useful to allow a connection to
survive extended periods without end-to-end connection, and decreasing
it allows application to fail faster. By default, the parameter is 0,
which makes the connection use the system default, and follows a logic
close to the keepalive parameters in its handling. When connecting
through a Unix-socket domain, the parameters have no effect.
Author: Ryohei Nagaura
Reviewed-by: Fabien Coelho, Robert Haas, Kyotaro Horiguchi, Kirk
Jamison, Mikalai Keida, Takayuki Tsunakawa, Andrei Yahorau
Discussion: https://postgr.es/m/EDA4195584F5064680D8130B1CA91C45367328@G01JPEXMBYT04
There was some confusion over the format of the error message returned
from the server during GSSAPI startup; specifically, it was expected
that a length would be returned when, in reality, at this early stage in
the startup sequence, no length is returned from the server as part of
an error message.
Correct the client-side code for dealing with error messages sent by the
server during startup by simply reading what's available into our
buffer, after we've discovered it's an error message, and then reporting
back what was returned.
In passing, also add in documentation of the environment variable
PGGSSENCMODE which was missed previously, and adjust the code to look
for the PGGSSENCMODE variable (the environment variable change was
missed in the prior GSSMODE -> GSSENCMODE commit).
Error-handling issue discovered by Peter Eisentraut, the rest were items
discovered during testing of the error handling.
On both the frontend and backend, prepare for GSSAPI encryption
support by moving common code for error handling into a separate file.
Fix a TODO for handling multiple status messages in the process.
Eliminate the OIDs, which have not been needed for some time.
Add frontend and backend encryption support functions. Keep the
context initiation for authentication-only separate on both the
frontend and backend in order to avoid concerns about changing the
requested flags to include encryption support.
In postmaster, pull GSSAPI authorization checking into a shared
function. Also share the initiator name between the encryption and
non-encryption codepaths.
For HBA, add "hostgssenc" and "hostnogssenc" entries that behave
similarly to their SSL counterparts. "hostgssenc" requires either
"gss", "trust", or "reject" for its authentication.
Similarly, add a "gssencmode" parameter to libpq. Supported values are
"disable", "require", and "prefer". Notably, negotiation will only be
attempted if credentials can be acquired. Move credential acquisition
into its own function to support this behavior.
Add a simple pg_stat_gssapi view similar to pg_stat_ssl, for monitoring
if GSSAPI authentication was used, what principal was used, and if
encryption is being used on the connection.
Finally, add documentation for everything new, and update existing
documentation on connection security.
Thanks to Michael Paquier for the Windows fixes.
Author: Robbie Harwood, with changes to the read/write functions by me.
Reviewed in various forms and at different times by: Michael Paquier,
Andres Freund, David Steele.
Discussion: https://www.postgresql.org/message-id/flat/jlg1tgq1ktm.fsf@thriss.redhat.com
Originally, if libpq got a failure (e.g., ECONNRESET) while trying to
send data to the server, it would just report that and wash its hands
of the matter. It was soon found that that wasn't a very pleasant way
of coping with server-initiated disconnections, so we introduced a hack
(pqHandleSendFailure) in the code that sends queries to make it peek
ahead for server error reports before reporting the send failure.
It now emerges that related cases can occur during connection setup;
in particular, as of TLS 1.3 it's unsafe to assume that SSL connection
failures will be reported by SSL_connect rather than during our first
send attempt. We could have fixed that in a hacky way by applying
pqHandleSendFailure after a startup packet send failure, but
(a) pqHandleSendFailure explicitly disclaims suitability for use in any
state except query startup, and (b) the problem still potentially exists
for other send attempts in libpq.
Instead, let's fix this in a more general fashion by eliminating
pqHandleSendFailure altogether, and instead arranging to postpone
all reports of send failures in libpq until after we've made an
attempt to read and process server messages. The send failure won't
be reported at all if we find a server message or detect input EOF.
(Note: this removes one of the reasons why libpq typically overwrites,
rather than appending to, conn->errorMessage: pqHandleSendFailure needed
that behavior so that the send failure report would be replaced if we
got a server message or read failure report. Eventually I'd like to get
rid of that overwrite behavior altogether, but today is not that day.
For the moment, pqSendSome is assuming that its callees will overwrite
not append to conn->errorMessage.)
Possibly this change should get back-patched someday; but it needs
testing first, so let's not consider that till after v12 beta.
Discussion: https://postgr.es/m/CAEepm=2n6Nv+5tFfe8YnkUm1fXgvxR0Mm1FoD+QKG-vLNGLyKg@mail.gmail.com
When hostaddr is given, the actual IP address that psql is connected to
can be totally unexpected for the given host. The more verbose output
we now generate makes things clearer. Since the "host" and "hostaddr"
parts of the conninfo could come from different sources (say, one of
them is in the service specification or a URI-style conninfo and the
other is not), this is not as silly as it may first appear. This is
also definitely useful if the hostname resolves to multiple addresses.
Author: Fabien Coelho
Reviewed-by: Pavel Stehule, Arthur Zakirov
Discussion: https://postgr.es/m/alpine.DEB.2.21.1810261532380.27686@lancrehttps://postgr.es/m/alpine.DEB.2.21.1808201323020.13832@lancre
This provides the features that used to exist in useful_strerror()
for users of strerror_r(), too. Also, standardize on the GNU convention
that strerror_r returns a char pointer that may not be NULL.
I notice that libpq's win32.c contains a variant version of strerror_r
that probably ought to be folded into strerror.c. But lacking a
Windows environment, I should leave that to somebody else.
Discussion: https://postgr.es/m/2975.1526862605@sss.pgh.pa.us
The following parameters have been parsed in lossy ways when specified
in a connection string processed by libpq:
- connect_timeout
- keepalives
- keepalives_count
- keepalives_idle
- keepalives_interval
- port
Overflowing values or the presence of incorrect characters were not
properly checked, leading to libpq trying to use such values and fail
with unhelpful error messages. This commit hardens the parsing of those
parameters so as it is possible to find easily incorrect values.
Author: Fabien Coelho
Reviewed-by: Peter Eisentraut, Michael Paquier
Discussion: https://postgr.es/m/alpine.DEB.2.21.1808171206180.20841@lancre
On ELF-based platforms (and maybe others?) it's possible for a shared
library, when dynamically loaded into the backend, to call the backend
versions of src/port and src/common functions rather than the frontend
versions that are actually linked into the shlib. This is definitely
not what we want, because the frontend versions often behave slightly
differently. Up to now it's been "slight" enough that nobody noticed;
but with the addition of SCRAM support functions in src/common, we're
observing crashes due to the difference between palloc and malloc
memory allocation rules, as reported in bug #15367 from Jeremy Evans.
The purpose of this patch is to create a direct test for this type of
mis-linking, so that we know whether any given platform requires extra
measures to prevent using the wrong functions. If the test fails, it
will lead to connection failures in the contrib/postgres_fdw regression
test. At the moment, *BSD platforms using ELF format are known to have
the problem and can be expected to fail; but we need to know whether
anything else does, and we need a reliable ongoing check for future
platforms.
Actually fixing the problem will be the subject of later commit(s).
Discussion: https://postgr.es/m/153626613985.23143.4743626885618266803@wrigleys.postgresql.org
libpq connection options as returned by PQconndefaults() have a
"dispchar" field that determines (among other things) whether an option
is a "debug" option, which shouldn't be shown by default to clients.
postgres_fdw makes use of that to control which connection options to
accept from a foreign server configuration.
Curiously, the "options" option, which allows passing configuration
settings to the backend server, was listed as a debug option, which
prevented it from being used by postgres_fdw. Maybe it was once meant
for debugging, but it's clearly in general use nowadays.
So change the dispchar for it to be the normal non-debug case. Also
remove the "debug" reference from its label field.
Reported-by: Shinoda, Noriyoshi <noriyoshi.shinoda@hpe.com>
Historically, we looked up the target hostname in connectDBStart, so that
PQconnectPoll did not need to do DNS name resolution. The patches that
added multiple-target-host support to libpq preserved this division of
labor; but it's really nonsensical now, because it means that if any one
of the target hosts fails to resolve in DNS, the connection fails. That
negates the no-single-point-of-failure goal of the feature. Additionally,
DNS lookups aren't exactly cheap, but the code did them all even if the
first connection attempt succeeds.
Hence, rearrange so that PQconnectPoll does the lookups, and only looks
up a hostname when it's time to try that host. This does mean that
PQconnectPoll could block on a DNS lookup --- but if you wanted to avoid
that, you should be using hostaddr, as the documentation has always
specified. It seems fairly unlikely that any applications would really
care whether the lookup occurs inside PQconnectStart or PQconnectPoll.
In addition to calling out that fact explicitly, do some other minor
wordsmithing in the docs around the multiple-target-host feature.
Since this seems like a bug in the multiple-target-host feature,
backpatch to v10 where that was introduced. In the back branches,
avoid moving any existing fields of struct pg_conn, just in case
any third-party code is looking into that struct.
Tom Lane, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/4913.1533827102@sss.pgh.pa.us
Commit 5f374fe7a attempted to turn the connect_timeout from an overall
maximum time limit into a per-host limit, but it didn't do a great job of
that. The timer would only get restarted if we actually detected timeout
within connectDBComplete(), not if we changed our attention to a new host
for some other reason. In that case the old timeout continued to run,
possibly causing a premature timeout failure for the new host.
Fix that, and also tweak the logic so that if we do get a timeout,
we advance to the next available IP address, not to the next host name.
There doesn't seem to be a good reason to assume that all the IP
addresses supplied for a given host name will necessarily fail the
same way as the current one. Moreover, this conforms better to the
admittedly-vague documentation statement that the timeout is "per
connection attempt". I changed that to "per host name or IP address"
to be clearer. (Note that reconnections to the same server, such as for
switching protocol version or SSL status, don't get their own separate
timeout; that was true before and remains so.)
Also clarify documentation about the interpretation of connect_timeout
values less than 2.
This seems like a bug, so back-patch to v10 where this logic came in.
Tom Lane, reviewed by Fabien Coelho
Discussion: https://postgr.es/m/5735.1533828184@sss.pgh.pa.us
The logic in PQconnectPoll() did not take care to ensure that all of
a PGconn's internal state variables were reset before trying a new
connection attempt. If we got far enough in the connection sequence
to have changed any of these variables, and then decided to try a new
server address or server name, the new connection might be completed
with some state that really only applied to the failed connection.
While this has assorted bad consequences, the only one that is clearly
a security issue is that password_needed didn't get reset, so that
if the first server asked for a password and the second didn't,
PQconnectionUsedPassword() would return an incorrect result. This
could be leveraged by unprivileged users of dblink or postgres_fdw
to allow them to use server-side login credentials that they should
not be able to use.
Other notable problems include the possibility of forcing a v2-protocol
connection to a server capable of supporting v3, or overriding
"sslmode=prefer" to cause a non-encrypted connection to a server that
would have accepted an encrypted one. Those are certainly bugs but
it's harder to paint them as security problems in themselves. However,
forcing a v2-protocol connection could result in libpq having a wrong
idea of the server's standard_conforming_strings setting, which opens
the door to SQL-injection attacks. The extent to which that's actually
a problem, given the prerequisite that the attacker needs control of
the client's connection parameters, is unclear.
These problems have existed for a long time, but became more easily
exploitable in v10, both because it introduced easy ways to force libpq
to abandon a connection attempt at a late stage and then try another one
(rather than just giving up), and because it provided an easy way to
specify multiple target hosts.
Fix by rearranging PQconnectPoll's state machine to provide centralized
places to reset state properly when moving to a new target host or when
dropping and retrying a connection to the same host.
Tom Lane, reviewed by Noah Misch. Our thanks to Andrew Krasichkov
for finding and reporting the problem.
Security: CVE-2018-10915
There are some problems with the tls-unique channel binding type. It's not
supported by all SSL libraries, and strictly speaking it's not defined for
TLS 1.3 at all, even though at least in OpenSSL, the functions used for it
still seem to work with TLS 1.3 connections. And since we had no
mechanism to negotiate what channel binding type to use, there would be
awkward interoperability issues if a server only supported some channel
binding types. tls-server-end-point seems feasible to support with any SSL
library, so let's just stick to that.
This removes the scram_channel_binding libpq option altogether, since there
is now only one supported channel binding type.
This also removes all the channel binding tests from the SSL test suite.
They were really just testing the scram_channel_binding option, which
is now gone. Channel binding is used if both client and server support it,
so it is used in the existing tests. It would be good to have some tests
specifically for channel binding, to make sure it really is used, and the
different combinations of a client and a server that support or doesn't
support it. The current set of settings we have make it hard to write such
tests, but I did test those things manually, by disabling
HAVE_BE_TLS_GET_CERTIFICATE_HASH and/or
HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH.
I also removed the SCRAM_CHANNEL_BINDING_TLS_END_POINT constant. This is a
matter of taste, but IMO it's more readable to just use the
"tls-server-end-point" string.
Refactor the checks on whether the SSL library supports the functions
needed for tls-server-end-point channel binding. Now the server won't
advertise, and the client won't choose, the SCRAM-SHA-256-PLUS variant, if
compiled with an OpenSSL version too old to support it.
In the passing, add some sanity checks to check that the chosen SASL
mechanism, SCRAM-SHA-256 or SCRAM-SHA-256-PLUS, matches whether the SCRAM
exchange used channel binding or not. For example, if the client selects
the non-channel-binding variant SCRAM-SHA-256, but in the SCRAM message
uses channel binding anyway. It's harmless from a security point of view,
I believe, and I'm not sure if there are some other conditions that would
cause the connection to fail, but it seems better to be strict about these
things and check explicitly.
Discussion: https://www.postgresql.org/message-id/ec787074-2305-c6f4-86aa-6902f98485a4%40iki.fi
Before v10, we always searched ~/.pgpass using the host parameter,
and nothing else, to match to the "hostname" field of ~/.pgpass.
(However, null host or host matching DEFAULT_PGSOCKET_DIR was replaced by
"localhost".) In v10, this got broken by commit 274bb2b38, repaired by
commit bdac9836d, and broken again by commit 7b02ba62e; in the code
actually shipped, we'd search with hostaddr if both that and host were
specified --- though oddly, *not* if only hostaddr were specified.
Since this is directly contrary to the documentation, and not
backwards-compatible, it's clearly a bug.
However, the change wasn't totally without justification, even though it
wasn't done quite right, because the pre-v10 behavior has arguably been
buggy since we added hostaddr. If hostaddr is specified and host isn't,
the pre-v10 code will search ~/.pgpass for "localhost", and ship that
password off to a server that most likely isn't local at all. That's
unhelpful at best, and could be a security breach at worst.
Therefore, rather than just revert to that old behavior, let's define
the behavior as "search with host if provided, else with hostaddr if
provided, else search for localhost". (As before, a host name matching
DEFAULT_PGSOCKET_DIR is replaced by localhost.) This matches the
behavior of the actual connection code, so that we don't pick up an
inappropriate password; and it allows useful searches to happen when
only hostaddr is given.
While we're messing around here, ensure that empty elements within a
host or hostaddr list select the same behavior as a totally-empty
field would; for instance "host=a,,b" is equivalent to "host=a,/tmp,b"
if DEFAULT_PGSOCKET_DIR is /tmp. Things worked that way in some cases
already, but not consistently so, which contributed to the confusion
about what key ~/.pgpass would get searched with.
Update documentation accordingly, and also clarify some nearby text.
Back-patch to v10 where the host/hostaddr list functionality was
introduced.
Discussion: https://postgr.es/m/30805.1532749137@sss.pgh.pa.us
Previously, PQhost didn't return the connected host details when the
connection type was CHT_HOST_ADDRESS (i.e., via hostaddr). Instead, it
returned the complete host connection parameter (which could contain
multiple hosts) or the default host details, which was confusing and
arguably incorrect.
Change this to return the actually connected host or hostaddr
irrespective of the connection type. When hostaddr but no host was
specified, hostaddr is now returned. Never return the original host
connection parameter, and document that PQhost cannot be relied on
before the connection is established.
PQport is similarly changed to always return the active connection port
and never the original connection parameter.
Author: Hari Babu <kommi.haribabu@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Kyotaro HORIGUCHI <horiguchi.kyotaro@lab.ntt.co.jp>
Reviewed-by: David G. Johnston <david.g.johnston@gmail.com>
Since SSL compression is no longer recommended, turn the default in
libpq from on to off.
OpenSSL 1.1.0 and many distribution packages already turn compression
off by default, so such a server won't accept compression anyway. So
this will mainly affect users of older OpenSSL installations.
Also update the documentation to make clear that this setting is no
longer recommended.
Discussion: https://www.postgresql.org/message-id/flat/595cf3b1-4ffe-7f05-6f72-f72b7afa7993%402ndquadrant.com
This parameter can be used to enforce the channel binding type used
during a SCRAM authentication. This can be useful to check code paths
where an invalid channel binding type is used by a client and will be
even more useful to allow testing other channel binding types when they
are added.
The default value is tls-unique, which is what RFC 5802 specifies.
Clients can optionally specify an empty value, which has as effect to
not use channel binding and use SCRAM-SHA-256 as chosen SASL mechanism.
More tests for SCRAM and channel binding are added to the SSL test
suite.
Author: Author: Michael Paquier <michael.paquier@gmail.com>
Michael Paquier