Current GIN code appears to don't handle traversing to the deleted page via
downlink. This commit fixes that by stepping right from the delete page like
we do in nbtree.
This commit also fixes setting 'deleted' flag to the GIN pages. Now other page
flags are not erased once page is deleted. That helps to keep our assertions
true if we arrive deleted page via downlink.
Discussion: https://postgr.es/m/CAPpHfdvMvsw-NcE5bRS7R1BbvA4BxoDnVVjkXC5W0Czvy9LVrg%40mail.gmail.com
Author: Alexander Korotkov
Reviewed-by: Peter Geoghegan
Backpatch-through: 9.4
Instead of WAL-logging every modification during the build separately,
first build the index without any WAL-logging, and make a separate pass
through the index at the end, to write all pages to the WAL. This
significantly reduces the amount of WAL generated, and is usually also
faster, despite the extra I/O needed for the extra scan through the index.
WAL generated this way is also faster to replay.
For GiST, the LSN-NSN interlock makes this a little tricky. All pages must
be marked with a valid (i.e. non-zero) LSN, so that the parent-child
LSN-NSN interlock works correctly. We now use magic value 1 for that during
index build. Change the fake LSN counter to begin from 1000, so that 1 is
safely smaller than any real or fake LSN. 2 would've been enough for our
purposes, but let's reserve a bigger range, in case we need more special
values in the future.
Author: Anastasia Lubennikova, Andrey V. Lepikhov
Reviewed-by: Heikki Linnakangas, Dmitry Dolgov
According to README we acquire predicate locks on entry tree leafs and posting
tree roots. However, when ginFindLeafPage() is going to lock leaf in exclusive
mode, then it checks root for conflicts regardless whether it's a entry or
posting tree. Assuming that we never place predicate lock on entry tree root
(excluding corner case when root is leaf), this check is redundant. This
commit removes this check. Now, root conflict checking is controlled by
separate argument of ginFindLeafPage().
Discussion: https://postgr.es/m/CAPpHfdv7rrDyy%3DMgsaK-L9kk0AH7az0B-mdC3w3p0FSb9uoyEg%40mail.gmail.com
Author: Alexander Korotkov
Backpatch-through: 11
The principle behind the locking was not very well thought-out, and not
documented. Add a section in the README to explain how it's supposed to
work, and change the code so that it actually works that way.
This fixes two bugs:
1. If fast update was turned on concurrently, subsequent inserts to the
pending list would not conflict with predicate locks that were acquired
earlier, on entry pages. The included 'predicate-gin-fastupdate' test
demonstrates that. To fix, make all scans acquire a predicate lock on
the metapage. That lock represents a scan of the pending list, whether
or not there is a pending list at the moment. Forget about the
optimization to skip locking/checking for locks, when fastupdate=off.
2. If a scan finds no match, it still needs to lock the entry page. The
point of predicate locks is to lock the gabs between values, whether
or not there is a match. The included 'predicate-gin-nomatch' test
tests that case.
In addition to those two bug fixes, this removes some unnecessary locking,
following the principle laid out in the README. Because all items in
a posting tree have the same key value, a lock on the posting tree root is
enough to cover all the items. (With a very large posting tree, it would
possibly be better to lock the posting tree leaf pages instead, so that a
"skip scan" with a query like "A & B", you could avoid unnecessary conflict
if a new tuple is inserted with A but !B. But let's keep this simple.)
Also, some spelling fixes.
Author: Heikki Linnakangas with some editorization by me
Review: Andrey Borodin, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/0b3ad2c2-2692-62a9-3a04-5724f2af9114@iki.fi
Predicate locks are used on per page basis only if fastupdate = off, in
opposite case predicate lock on pending list will effectively lock whole index,
to reduce locking overhead, just lock a relation. Entry and posting trees are
essentially B-tree, so locks are acquired on leaf pages only.
Author: Shubham Barai with some editorization by me and Dmitry Ivanov
Review by: Alexander Korotkov, Dmitry Ivanov, Fedor Sigaev
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPt5sWW+EwTaKUGFL5_XFcZ0MuGBcyJ70oqbWqr42YKR8Q@mail.gmail.com
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
GIN vacuum during cleaning posting tree can lock this whole tree for a long
time with by holding LockBufferForCleanup() on root. Patch changes it with
two ways: first, cleanup lock will be taken only if there is an empty page
(which should be deleted) and, second, it tries to lock only subtree, not the
whole posting tree.
Author: Andrey Borodin with minor editorization by me
Reviewed-by: Jeff Davis, me
https://commitfest.postgresql.org/13/896/
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
Commit 36a35c550a turned the interface between ginPlaceToPage and
its subroutines in gindatapage.c and ginentrypage.c into a royal mess:
page-update critical sections were started in one place and finished in
another place not even in the same file, and the very same subroutine
might return having started a critical section or not. Subsequent patches
band-aided over some of the problems with this design by making things
even messier.
One user-visible resulting problem is memory leaks caused by the need for
the subroutines to allocate storage that would survive until ginPlaceToPage
calls XLogInsert (as reported by Julien Rouhaud). This would not typically
be noticeable during retail index updates. It could be visible in a GIN
index build, in the form of memory consumption swelling to several times
the commanded maintenance_work_mem.
Another rather nasty problem is that in the internal-page-splitting code
path, we would clear the child page's GIN_INCOMPLETE_SPLIT flag well before
entering the critical section that it's supposed to be cleared in; a
failure in between would leave the index in a corrupt state. There were
also assorted coding-rule violations with little immediate consequence but
possible long-term hazards, such as beginning an XLogInsert sequence before
entering a critical section, or calling elog(DEBUG) inside a critical
section.
To fix, redefine the API between ginPlaceToPage() and its subroutines
by splitting the subroutines into two parts. The "beginPlaceToPage"
subroutine does what can be done outside a critical section, including
full computation of the result pages into temporary storage when we're
going to split the target page. The "execPlaceToPage" subroutine is called
within a critical section established by ginPlaceToPage(), and it handles
the actual page update in the non-split code path. The critical section,
as well as the XLOG insertion call sequence, are both now always started
and finished in ginPlaceToPage(). Also, make ginPlaceToPage() create and
work in a short-lived memory context to eliminate the leakage problem.
(Since a short-lived memory context had been getting created in the most
common code path in the subroutines, this shouldn't cause any noticeable
performance penalty; we're just moving the overhead up one call level.)
In passing, fix a bunch of comments that had gone unmaintained throughout
all this klugery.
Report: <571276DD.5050303@dalibo.com>
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
If data checksums or wal_log_hints is on, and a GIN page is split, the code
to find a new, empty, block was called after having already called
XLogBeginInsert(). That causes an assertion failure or PANIC, if finding the
new block involves updating a FSM page that had not been modified since last
checkpoint, because that update is WAL-logged, which calls XLogBeginInsert
again. Nested XLogBeginInsert calls are not supported.
To fix, rearrange GIN code so that XLogBeginInsert is called later, after
finding the victim buffers.
Reported by Jeff Janes.
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
Each WAL record now carries information about the modified relation and
block(s) in a standardized format. That makes it easier to write tools that
need that information, like pg_rewind, prefetching the blocks to speed up
recovery, etc.
There's a whole new API for building WAL records, replacing the XLogRecData
chains used previously. The new API consists of XLogRegister* functions,
which are called for each buffer and chunk of data that is added to the
record. The new API also gives more control over when a full-page image is
written, by passing flags to the XLogRegisterBuffer function.
This also simplifies the XLogReadBufferForRedo() calls. The function can dig
the relation and block number from the WAL record, so they no longer need to
be passed as arguments.
For the convenience of redo routines, XLogReader now disects each WAL record
after reading it, copying the main data part and the per-block data into
MAXALIGNed buffers. The data chunks are not aligned within the WAL record,
but the redo routines can assume that the pointers returned by XLogRecGet*
functions are. Redo routines are now passed the XLogReaderState, which
contains the record in the already-disected format, instead of the plain
XLogRecord.
The new record format also makes the fixed size XLogRecord header smaller,
by removing the xl_len field. The length of the "main data" portion is now
stored at the end of the WAL record, and there's a separate header after
XLogRecord for it. The alignment padding at the end of XLogRecord is also
removed. This compansates for the fact that the new format would otherwise
be more bulky than the old format.
Reviewed by Andres Freund, Amit Kapila, Michael Paquier, Alvaro Herrera,
Fujii Masao.
xlog.c is huge, this makes it a little bit smaller, which is nice. Functions
related to putting together the WAL record are in xloginsert.c, and the
lower level stuff for managing WAL buffers and such are in xlog.c.
Also move the definition of XLogRecord to a separate header file. This
causes churn in the #includes of all the files that write WAL records, and
redo routines, but it avoids pulling in xlog.h into most places.
Reviewed by Michael Paquier, Alvaro Herrera, Andres Freund and Amit Kapila.
Inserting a downlink to an internal page clears the incomplete-split flag
of the child's left sibling, so the left sibling's LSN also needs to be
updated and it needs to be marked dirty. The codepath for an insertion got
this right, but the case where the internal node is split because of
inserting the new downlink missed that.
GIN posting lists are now encoded using varbyte-encoding, which allows them
to fit in much smaller space than the straight ItemPointer array format used
before. The new encoding is used for both the lists stored in-line in entry
tree items, and in posting tree leaf pages.
To maintain backwards-compatibility and keep pg_upgrade working, the code
can still read old-style pages and tuples. Posting tree leaf pages in the
new format are flagged with GIN_COMPRESSED flag, to distinguish old and new
format pages. Likewise, entry tree tuples in the new format have a
GIN_ITUP_COMPRESSED flag set in a bit that was previously unused.
This patch bumps GIN_CURRENT_VERSION from 1 to 2. New indexes created with
version 9.4 will therefore have version number 2 in the metapage, while old
pg_upgraded indexes will have version 1. The code treats them the same, but
it might be come handy in the future, if we want to drop support for the
uncompressed format.
Alexander Korotkov and me. Reviewed by Tomas Vondra and Amit Langote.
Replace it with an approach similar to what GiST uses: when a page is split,
the left sibling is marked with a flag indicating that the parent hasn't been
updated yet. When the parent is updated, the flag is cleared. If an insertion
steps on a page with the flag set, it will finish split before proceeding
with the insertion.
The post-recovery cleanup mechanism was never totally reliable, as insertion
to the parent could fail e.g because of running out of memory or disk space,
leaving the tree in an inconsistent state.
This also divides the responsibility of WAL-logging more clearly between
the generic ginbtree.c code, and the parts specific to entry and posting
trees. There is now a common WAL record format for insertions and deletions,
which is written by ginbtree.c, followed by tree-specific payload, which is
returned by the placetopage- and split- callbacks.
Separate the insertion payload from the more static portions of GinBtree.
GinBtree now only contains information related to searching the tree, and
the information of what to insert is passed separately.
Add root block number to GinBtree, instead of passing it around all the
functions as argument.
Split off ginFinishSplit() from ginInsertValue(). ginFinishSplit is
responsible for finding the parent and inserting the downlink to it.
Split off the portion of ginInsertValue that inserts the tuple to current
level into a separate function, ginPlaceToPage. ginInsertValue's charter
is now to recurse up the tree to insert the downlink, when a page split is
required.
This is in preparation for a patch to change the way incomplete splits are
handled, which will need to do these operations separately. And IMHO makes
the code more readable anyway.
This creates a new gin-btree callback function for creating a downlink for
a page. Previously, ginxlog.c duplicated the logic used during normal
operation.
If a page is deleted, and reused for something else, just as a search is
following a rightlink to it from its left sibling, the search would continue
scanning whatever the new contents of the page are. That could lead to
incorrect query results, or even something more curious if the page is
reused for a different kind of a page.
To fix, modify the search algorithm to lock the next page before releasing
the previous one, and refrain from deleting pages from the leftmost branch
of the tree.
Add a new Concurrency section to the README, explaining why this works.
There is a lot more one could say about concurrency in GIN, but that's for
another patch.
Backpatch to all supported versions.
Merge the isEnoughSpace and placeToPage functions in the b-tree interface
into one function that tries to put a tuple on page, and returns false if
it doesn't fit.
Move createPostingTree function to gindatapage.c, and change its contract
so that it can be passed more items than fit on the root page. It's in a
better position than the callers to know how many items fit.
Move ginMergeItemPointers out of gindatapage.c, into a separate file.
These changes make no difference now, but reduce the footprint of Alexander
Korotkov's upcoming patch to pack item pointers more tightly.
Remove use of PageSetTLI() from all page manipulation functions
and adjust README to indicate change in the way we make changes
to pages. Repurpose those bytes into the pd_checksum field and
explain how that works in comments about page header.
Refactoring ahead of actual feature patch which would make use
of the checksum field, arriving later.
Jeff Davis, with comments and doc changes by Simon Riggs
Direction suggested by Robert Haas; many others providing
review comments.
The Solaris Studio compiler warns about these instances, unlike more
mainstream compilers such as gcc. But manual inspection showed that
the code is clearly not reachable, and we hope no worthy compiler will
complain about removing this code.
Make it clearer that the passed stack mustn't be empty, and that we
are not supposed to fall off the end of the stack in the main loop.
Tighten the loop that extracts the root block number, too.
Markus Wanner and Tom Lane
Per my recent proposal(s). Null key datums can now be returned by
extractValue and extractQuery functions, and will be stored in the index.
Also, placeholder entries are made for indexable items that are NULL or
contain no keys according to extractValue. This means that the index is
now always complete, having at least one entry for every indexed heap TID,
and so we can get rid of the prohibition on full-index scans. A full-index
scan is implemented much the same way as partial-match scans were already:
we build a bitmap representing all the TIDs found in the index, and then
drive the results off that.
Also, introduce a concept of a "search mode" that can be requested by
extractQuery when the operator requires matching to empty items (this is
just as cheap as matching to a single key) or requires a full index scan
(which is not so cheap, but it sure beats failing or giving wrong answers).
The behavior remains backward compatible for opclasses that don't return
any null keys or request a non-default search mode.
Using these features, we can now make the GIN index opclass for anyarray
behave in a way that matches the actual anyarray operators for &&, <@, @>,
and = ... which it failed to do before in assorted corner cases.
This commit fixes the core GIN code and ginarrayprocs.c, updates the
documentation, and adds some simple regression test cases for the new
behaviors using the array operators. The tsearch and contrib GIN opclass
support functions still need to be looked over and probably fixed.
Another thing I intend to fix separately is that this is pretty inefficient
for cases where more than one scan condition needs a full-index search:
we'll run duplicate GinScanEntrys, each one of which builds a large bitmap.
There is some existing logic to merge duplicate GinScanEntrys but it needs
refactoring to make it work for entries belonging to different scan keys.
Note that most of gin.h has been split out into a new file gin_private.h,
so that gin.h doesn't export anything that's not supposed to be used by GIN
opclasses or the rest of the backend. I did quite a bit of other code
beautification work as well, mostly fixing comments and choosing more
appropriate names for things.
This commit replaces pg_class.relistemp with pg_class.relpersistence;
and also modifies the RangeVar node type to carry relpersistence rather
than istemp. It also removes removes rd_istemp from RelationData and
instead performs the correct computation based on relpersistence.
For clarity, we add three new macros: RelationNeedsWAL(),
RelationUsesLocalBuffers(), and RelationUsesTempNamespace(), so that we
can clarify the purpose of each check that previous depended on
rd_istemp.
This is intended as infrastructure for the upcoming unlogged tables
patch, as well as for future possible work on global temporary tables.
Bruce Momjian