This is similar to what pg_basebackup and pg_rewind do when reporting
cumulative data, and that's more user-friendly. Carriage returns are
now used when stderr points to a terminal, and newlines are used in
other cases, like a redirection to a log file.
Author: Amit Langote
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/CA+HiwqFNwEjPeVaQsp2L7DyCPv1Eg1guwhrVhzMYqUJUk8ULKg@mail.gmail.com
This patch adopts the overflow check logic introduced by commit cbdb8b4c0
into two more places. interval_mul() failed to notice if it computed a
new microseconds value that was one more than INT64_MAX, and pgbench's
double-to-int64 logic had the same sorts of edge-case problems that
cbdb8b4c0 fixed in the core code.
To make this easier to get right in future, put the guts of the checks
into new macros in c.h, and add commentary about how to use the macros
correctly.
Back-patch to all supported branches, as we did with the previous fix.
Yuya Watari
Discussion: https://postgr.es/m/CAJ2pMkbkkFw2hb9Qb1Zj8d06EhWAQXFLy73St4qWv6aX=vqnjw@mail.gmail.com
This commit allows --init-steps option in pgbench to accept "G" character
meaning server-side data generation as an initialization step.
With "G", only limited queries are sent from pgbench client and
then data is actually generated in the server. This might make
the initialization phase faster if the bandwidth between pgbench client
and the server is low.
Author: Fabien Coelho
Reviewed-by: Anna Endo, Ibrar Ahmed, Fujii Masao
Discussion: https://postgr.es/m/alpine.DEB.2.21.1904061826420.3678@lancre
These new options allow users to partition the pgbench_accounts table by
specifying the number of partitions and partitioning method. The values
allowed for partitioning method are range and hash.
This feature allows users to measure the overhead of partitioning if any.
Author: Fabien COELHO
Reviewed-by: Amit Kapila, Amit Langote, Dilip Kumar, Asif Rehman, and
Alvaro Herrera
Discussion: https://postgr.es/m/alpine.DEB.2.21.1907230826190.7008@lancre
This is still using the 2.0 version of pg_bsd_indent.
I thought it would be good to commit this separately,
so as to document the differences between 2.0 and 2.1 behavior.
Discussion: https://postgr.es/m/16296.1558103386@sss.pgh.pa.us
The original placement of this module in src/fe_utils/ is ill-considered,
because several src/common/ modules have dependencies on it, meaning that
libpgcommon and libpgfeutils now have mutual dependencies. That makes it
pointless to have distinct libraries at all. The intended design is that
libpgcommon is lower-level than libpgfeutils, so only dependencies from
the latter to the former are acceptable.
We already have the precedent that fe_memutils and a couple of other
modules in src/common/ are frontend-only, so it's not stretching anything
out of whack to treat logging.c as a frontend-only module in src/common/.
To the extent that such modules help provide a common frontend/backend
environment for the rest of common/ to use, it's a reasonable design.
(logging.c does not yet provide an ereport() emulation, but one can
dream.)
Hence, move these files over, and revert basically all of the build-system
changes made by commit cc8d41511. There are no places that need to grow
new dependencies on libpgcommon, further reinforcing the idea that this
is the right solution.
Discussion: https://postgr.es/m/a912ffff-f6e4-778a-c86a-cf5c47a12933@2ndquadrant.com
The buildfarm points out that UINT64_FORMAT might not work with sscanf;
it's calibrated for our printf implementation, which might not agree
with the platform-supplied sscanf. Fall back to just accepting an
unsigned long, which is already more than the documentation promises.
Oversight in e6c3ba7fb; back-patch to v11, as that was.
This style is frowned upon. I inadvertently introduced one in commit
fe0e0b4fc7. (My compiler does not complain about it, even though
-Wdeclaration-after-statement is specified. Weird.)
Author: Masahiko Sawada
Commit 25ee70511e introduced a memory leak in pgbench: some PGresult
structs were not being freed during error bailout, because we're now
doing more PQgetResult() calls than previously. Since there's more
cleanup code outside the discard_response() routine than in it, refactor
the cleanup code, removing the routine.
This has little effect currently, since we abandon processing after
hitting errors, but if we ever get further pgbench features (such as
testing for serializable transactions), it'll matter.
Per Coverity.
Reviewed-by: Michaël Paquier
Not required after nuking the zipfian thread-local cache.
Also add a comment about hazardous pointer punning in threadRun(),
and avoid using "thread" to refer to the threads array as a whole.
Fabien Coelho and Tom Lane, per suggestion from Alvaro Herrera
Discussion: https://postgr.es/m/alpine.DEB.2.21.1904032126060.7997@lancre
Remove the code that supported zipfian distribution parameters less
than 1.0, as it had undocumented performance hazards, and it's not
clear that the case is useful enough to justify either fixing or
documenting those hazards.
Also, since the code path for parameter > 1.0 could perform badly
for values very close to 1.0, establish a minimum allowed value
of 1.001. This solution seems superior to the previous vague
documentation warning about small values not performing well.
Fabien Coelho, per a gripe from Tomas Vondra
Discussion: https://postgr.es/m/b5e172e9-ad22-48a3-86a3-589afa20e8f7@2ndquadrant.com
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
The new function is only in charge of meta commands, not SQL commands.
This change makes the code a little clearer: now all the state changes
are effected by advanceConnectionState. It also removes one indent
level, which makes the diff look bulkier than it really is.
Author: Fabien Coelho
Reviewed-by: Kirk Jamison
Discussion: https://postgr.es/m/alpine.DEB.2.21.1811240904500.12627@lancre
Partial revert of commit 6260cc550b, "pgbench: add \cset and \gset
commands".
While \gset is widely considered a useful and necessary tool for user-
defined benchmarks, \cset does not have as much value, and its
implementation was considered "not to be up to project standards"
(though I, Álvaro, can't quite understand exactly how). Therefore,
remove \cset.
Author: Fabien Coelho
Discussion: https://postgr.es/m/alpine.DEB.2.21.1903230716030.18811@lancre
Discussion: https://postgr.es/m/201901101900.mv7zduch6sad@alvherre.pgsql
pgbench's arbitrary limit of 10 arguments for SQL statements or
metacommands is far too low. Increase it to 256.
This results in a very modest increase in memory usage, not enough to
worry about.
The maximum includes the SQL statement or metacommand. This is reflected
in the comments and revised TAP tests.
Simon Riggs and Dagfinn Ilmari Mannsåker with some light editing by me.
Reviewed by: David Rowley and Fabien Coelho
Discussion: https://postgr.es/m/CANP8+jJiMJOAf-dLoHuR-8GENiK+eHTY=Omw38Qx7j2g0NDTXA@mail.gmail.com
The pgbench regression test supposed that srandom() with a specific value
would result in deterministic output from random(), as required by POSIX.
It emerges however that OpenBSD is too smart to be constrained by mere
standards, so their random() emits nondeterministic output anyway.
While a workaround does exist, what seems like a better fix is to stop
relying on the platform's srandom()/random() altogether, so that what
you get from --random-seed=N is not merely deterministic but platform
independent. Hence, use a separate pg_jrand48() random sequence in
place of random().
Also adjust the regression test case that's supposed to detect
nondeterminism so that it's more likely to detect it; the original
choice of random_zipfian parameter tended to produce the same output
all the time even if the underlying behavior wasn't deterministic.
In passing, improve pgbench's docs about random_zipfian().
Back-patch to v11 where this code was introduced.
Fabien Coelho and Tom Lane
Discussion: https://postgr.es/m/4615.1547792324@sss.pgh.pa.us
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
These commands allow assignment of values produced by queries to pgbench
variables, where they can be used by further commands. \gset terminates
a command sequence (just like a bare semicolon); \cset separates
multiple queries in a compound command, like an escaped semicolon (\;).
A prefix can be provided to the \-command and is prepended to the name
of each output column to produce the final variable name.
This feature allows pgbench scripts to react meaningfully to the actual
database contents, allowing more powerful benchmarks to be written.
Authors: Fabien Coelho, Álvaro Herrera
Reviewed-by: Amit Langote <Langote_Amit_f8@lab.ntt.co.jp>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Tatsuo Ishii <ishii@sraoss.co.jp>
Reviewed-by: Rafia Sabih <rafia.sabih@enterprisedb.com>
Discussion: https://postgr.es/m/alpine.DEB.2.20.1607091005330.3412@sto
This removes a portion of infrastructure introduced by fe0a0b5 to allow
compilation of Postgres in environments where no strong random source is
available, meaning that there is no linking to OpenSSL and no
/dev/urandom (Windows having its own CryptoAPI). No systems shipped
this century lack /dev/urandom, and the buildfarm is actually not
testing this switch at all, so just remove it. This simplifies
particularly some backend code which included a fallback implementation
using shared memory, and removes a set of alternate regression output
files from pgcrypto.
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20181230063219.GG608@paquier.xyz
This commit continues the code improvements started by commit
12788ae49e. With this commit, state machine transitions are better
contained in the routine that was called doCustom() and is now called
advanceConnectionState -- the resulting code is easier to reason about,
since there are no state changes occuring in the outer layer.
This change is prompted by future patches to add more features to
pgbench, which will need to effect some more surgery to this code.
Fabien's original had all the machine state changes inside one routine,
but I (Álvaro) thought that a subroutine to handle command execution is
more straightforward to review, so this commit does not match Fabien's
submission closely. If something is broken, it's probably my fault.
Author: Fabien Coelho, Álvaro Herrera
Reviewed-by: Kirk Jamison
Discussion: https://postgr.es/m/alpine.DEB.2.21.1808111104320.1705@lancre
This becomes useful when used to retry a transaction after a
serialization error or deadlock abort. (We don't yet have that feature,
but this is preparation for it.)
While at it, use separate random state for thread administratrivia such
as deciding which script to run, how long to delay for throttling, or
whether to log a message when sampling; this not only makes these tasks
independent of each other, but makes the actual thread run
deterministic.
Author: Marina Polyakova
Reviewed-by: Fabien Coelho
Discussion: https://postgr.es/m/72a0d590d6ba06f242d75c2e641820ec@postgrespro.ru
When an error occurs during a benchmark run, exit with a nonzero exit
code and write a message at the end. Previously, it would just print
the error message when it happened but then proceed to print the run
summary normally and exit with status 0. To still allow
distinguishing setup from run-time errors, we use exit status 2 for
the new state, whereas existing errors during pgbench initialization
use exit status 1.
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
It's fairly silly to truncate the throttle_delay to integer when the only
math we ever do with it requires converting back to double. Furthermore,
given that people are starting to complain about restrictions like only
supporting 1K client connections, I don't think we're very far away from
situations where the precision loss matters. As the code stood, for
example, there's no difference between --rate 100001 and --rate 111111;
both get converted to throttle_delay = 9. Somebody trying to run 100
threads and have each one dispatch around 1K TPS would find this lack of
precision rather surprising, especially since the required per-thread
delays are around 1ms, well within the timing precision of modern systems.
Previously, pgbench always used select(2) for this purpose, but that's
problematic for very high client counts, because select() can't deal
with file descriptor numbers larger than FD_SETSIZE. It's pretty common
for that to be only 1024 or so, whereas modern OSes can allow many more
open files than that. Using poll(2) would surmount that problem, but it
creates another one: poll()'s timeout resolution is only 1ms, which is
poor enough to cause problems with --rate specifications approaching or
exceeding 1K TPS.
On platforms that have ppoll(2), which includes Linux and recent
FreeBSD, we can use that to avoid the FD_SETSIZE problem without any
loss of timeout resolution. Hence, add configure logic to test for
ppoll(), and use it if available.
This patch introduces an abstraction layer into pgbench that could
be extended to support other kernel event-wait APIs such as kevents.
But actually adding such support is a matter for some future patch.
Doug Rady, reviewed by Robert Haas and Fabien Coelho, and whacked around
a good bit more by me
Discussion: https://postgr.es/m/23D017C9-81B7-484D-8490-FD94DEC4DF59@amazon.com
Update links that resulted in redirects. Most are changes from http to
https, but there are also some other minor edits. (There are still some
redirects where the target URL looks less elegant than the one we
currently have. I have left those as is.)
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
Compilation failed for lack of an #ifdef on builds without
pg_strong_random(). Also fix relevant error messages to meet
project style guidelines.
Fabien Coelho, further adjusted by me
Discussion: https://postgr.es/m/32390.1522464534@sss.pgh.pa.us
Setting random could increase reproducibility of test in some cases. Patch
suggests three providers for seed: time (default), strong random
generator (if available) and unsigned constant. Seed could be set from
command line or enviroment variable.
Author: Fabien Coelho
Reviewed by: Chapman Flack
Discussion: https://www.postgresql.org/message-id/flat/20160407082711.q7iq3ykffqxcszkv@alap3.anarazel.de
Peter Eisentraut