Commit 0da33c762 introduced an unfortunate regression in pg_ctl on
Windows: if the log file specified with -l doesn't exist yet, and
pg_ctl is running with Administrator privileges, then the log file
might get created with permissions that prevent the postmaster from
writing on it. (It seems that whether this happens depends on whether
the log file is inside the user's home directory or not, and perhaps
on other phase-of-the-moon conditions, which may explain why we failed
to notice it sooner.)
To fix, just don't create the log file if it doesn't exist yet. The
case where we need to wait obviously only occurs with a pre-existing
log file.
In passing, switch from using fopen() to plain open(), saving a few
cycles.
Per bug #16259 from Jonathan Katz and Heath Lord. Back-patch to v12,
as the faulty commit was.
Alexander Lakhin
Discussion: https://postgr.es/m/16259-c5ebed32a262a8b1@postgresql.org
On Windows, we use CMD.EXE to redirect the postmaster's stdout/stderr
into a log file. CMD.EXE will open that file with non-sharing-friendly
parameters, and the file will remain open for a short time after the
postmaster has removed postmaster.pid. This can result in an
ERROR_SHARING_VIOLATION failure if we attempt to start a new postmaster
immediately with the same log file (e.g. during "pg_ctl restart").
This seems to explain intermittent buildfarm failures we've been seeing
on Windows machines.
To fix, just open and close the log file using our own pgwin32_open(),
which will wait if necessary to avoid the failure. (Perhaps someday
we should stop using CMD.EXE, but that would be a far more complex
patch, and it doesn't seem worth the trouble ... yet.)
Back-patch to v12. This only solves the problem when frontend fopen()
is redirected to pgwin32_fopen(), which has only been true since commit
0ba06e0bf. Hence, no point in back-patching further, unless we care
to back-patch that change too.
Diagnosis and patch by Alexander Lakhin (bug #16154).
Discussion: https://postgr.es/m/16154-1ccf0b537b24d5e0@postgresql.org
Historically, psql consulted COMSPEC to spawn a shell in its \! command,
but we just invoked "cmd" when spawning shells in pg_ctl and pg_regress.
It seems better to rely on the environment variable, if it's set,
in all cases.
It's debatable whether this is a bug fix or just a behavioral change,
so no back-patch.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/16080-5d7f03222469f717@postgresql.org
As of d9dd406fe2, we require MSVC 2013,
which means _MSC_VER >= 1800. This means that conditionals about
older versions of _MSC_VER can be removed or simplified.
Previous code was also in some cases handling MinGW, where _MSC_VER is
not defined at all, incorrectly, such as in pg_ctl.c and win32_port.h,
leading to some compiler warnings. This should now be handled better.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Temporarily change pg_ctl so that the postmaster's exit status will
be printed (to the postmaster's stdout). This is to help identify
the cause of intermittent "postmaster exited during a parallel
transaction" failures seen on a couple of buildfarm members. This
change degrades pg_ctl's functionality in a couple of minor ways,
so we'll revert it once we've obtained the desired info.
Discussion: https://postgr.es/m/18537.1570421268@sss.pgh.pa.us
b654714 has reworked the way trailing CR/LF characters are removed from
strings. This commit introduces a new routine in common/string.c and
refactors the code so as the logic is in a single place, mostly.
Author: Michael Paquier
Reviewed-by: Bruce Momjian
Discussion: https://postgr.es/m/20190801031820.GF29334@paquier.xyz
libpq failed to ignore Windows-style newlines in connection service files.
This normally wasn't a problem on Windows itself, because fgets() would
convert \r\n to just \n. But if libpq were running inside a program that
changes the default fopen mode to binary, it would see the \r's and think
they were data. In any case, it's project policy to ignore \r in text
files unconditionally, because people sometimes try to use files with
DOS-style newlines on Unix machines, where the C library won't hide that
from us.
Hence, adjust parseServiceFile() to ignore \r as well as \n at the end of
the line. In HEAD, go a little further and make it ignore all trailing
whitespace, to match what it's always done with leading whitespace.
In HEAD, also run around and fix up everyplace where we have
newline-chomping code to make all those places look consistent and
uniformly drop \r. It is not clear whether any of those changes are
fixing live bugs. Most of the non-cosmetic changes are in places that
are reading popen output, and the jury is still out as to whether popen
on Windows can return \r\n. (The Windows-specific code in pipe_read_line
seems to think so, but our lack of support for this elsewhere suggests
maybe it's not a problem in practice.) Hence, I desisted from applying
those changes to back branches, except in run_ssl_passphrase_command()
which is new enough and little-tested enough that we'd probably not have
heard about any problems there.
Tom Lane and Michael Paquier, per bug #15827 from Jorge Gustavo Rocha.
Back-patch the parseServiceFile() change to all supported branches,
and the run_ssl_passphrase_command() change to v11 where that was added.
Discussion: https://postgr.es/m/15827-e6ba53a3a7ed543c@postgresql.org
This changes various places where appendPQExpBuffer was used in places
where it was possible to use appendPQExpBufferStr, and likewise for
appendStringInfo and appendStringInfoString. This is really just a
stylistic improvement, but there are also small performance gains to be
had from doing this.
Discussion: http://postgr.es/m/CAKJS1f9P=M-3ULmPvr8iCno8yvfDViHibJjpriHU8+SXUgeZ=w@mail.gmail.com
The original placement of this module in src/fe_utils/ is ill-considered,
because several src/common/ modules have dependencies on it, meaning that
libpgcommon and libpgfeutils now have mutual dependencies. That makes it
pointless to have distinct libraries at all. The intended design is that
libpgcommon is lower-level than libpgfeutils, so only dependencies from
the latter to the former are acceptable.
We already have the precedent that fe_memutils and a couple of other
modules in src/common/ are frontend-only, so it's not stretching anything
out of whack to treat logging.c as a frontend-only module in src/common/.
To the extent that such modules help provide a common frontend/backend
environment for the rest of common/ to use, it's a reasonable design.
(logging.c does not yet provide an ereport() emulation, but one can
dream.)
Hence, move these files over, and revert basically all of the build-system
changes made by commit cc8d41511. There are no places that need to grow
new dependencies on libpgcommon, further reinforcing the idea that this
is the right solution.
Discussion: https://postgr.es/m/a912ffff-f6e4-778a-c86a-cf5c47a12933@2ndquadrant.com
Like the backend, the frontend has wrappers on top of malloc() and such
whose use is recommended. Particularly, it is possible to do memory
allocation without issuing an error. Some binaries missed the use of
those wrappers, so let's fix the gap for consistency.
This also fixes two latent bugs:
- In pg_dump/pg_dumpall when parsing an ACL item, on an out-of-memory
error for strdup(), the code considered the failure as a ACL parsing
problem instead of an actual OOM.
- In pg_waldump, an OOM when building the target directory string would
cause a crash.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/gY0y9xenfoBPc-Tufsr2Zg-MmkrJslm0Tw_CMg4p_j58-k_PXNC0klMdkKQkg61BkXC9_uWo-DcUzfxnHqpkpoR5jjVZrPHqKYikcHIiONhg=@yesql.se
This unifies the various ad hoc logging (message printing, error
printing) systems used throughout the command-line programs.
Features:
- Program name is automatically prefixed.
- Message string does not end with newline. This removes a common
source of inconsistencies and omissions.
- Additionally, a final newline is automatically stripped, simplifying
use of PQerrorMessage() etc., another common source of mistakes.
- I converted error message strings to use %m where possible.
- As a result of the above several points, more translatable message
strings can be shared between different components and between
frontends and backend, without gratuitous punctuation or whitespace
differences.
- There is support for setting a "log level". This is not meant to be
user-facing, but can be used internally to implement debug or
verbose modes.
- Lazy argument evaluation, so no significant overhead if logging at
some level is disabled.
- Some color in the messages, similar to gcc and clang. Set
PG_COLOR=auto to try it out. Some colors are predefined, but can be
customized by setting PG_COLORS.
- Common files (common/, fe_utils/, etc.) can handle logging much more
simply by just using one API without worrying too much about the
context of the calling program, requiring callbacks, or having to
pass "progname" around everywhere.
- Some programs called setvbuf() to make sure that stderr is
unbuffered, even on Windows. But not all programs did that. This
is now done centrally.
Soft goals:
- Reduces vertical space use and visual complexity of error reporting
in the source code.
- Encourages more deliberate classification of messages. For example,
in some cases it wasn't clear without analyzing the surrounding code
whether a message was meant as an error or just an info.
- Concepts and terms are vaguely aligned with popular logging
frameworks such as log4j and Python logging.
This is all just about printing stuff out. Nothing affects program
flow (e.g., fatal exits). The uses are just too varied to do that.
Some existing code had wrappers that do some kind of print-and-exit,
and I adapted those.
I tried to keep the output mostly the same, but there is a lot of
historical baggage to unwind and special cases to consider, and I
might not always have succeeded. One significant change is that
pg_rewind used to write all error messages to stdout. That is now
changed to stderr.
Reviewed-by: Donald Dong <xdong@csumb.edu>
Reviewed-by: Arthur Zakirov <a.zakirov@postgrespro.ru>
Discussion: https://www.postgresql.org/message-id/flat/6a609b43-4f57-7348-6480-bd022f924310@2ndquadrant.com
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
pg_ctl is supposed to daemonize the postmaster process, so that it's not
affected by signals to the launching process group. Before this patch, if
you had a shell script that used "pg_ctl start", and you interrupted the
shell script after postmaster had been launched, postmaster was also
killed. To fix, call setsid() after forking the postmaster process.
Long time ago, we had a 'silent_mode' option, which daemonized the
postmaster process by calling setsid(), but that was removed back in 2011
(commit f7ea6beaf4). We discussed bringing that back in some form, but
pg_ctl is the documented way of launching postmaster to the background, so
putting the setsid() call in pg_ctl itself seems appropriate.
Just putting postmaster in a separate session would change the behavior
when you interrupt "pg_ctl -w start", e.g. with CTRL-C, while it's waiting
for postmaster to start. The historical behavior has been that
interrupting pg_ctl aborts the server launch, which is handy if the server
is stuck in recovery, for example, and won't fully start up. To keep that
behavior, install a signal handler in pg_ctl, to explicitly kill
postmaster, if pg_ctl is interrupted while it's waiting for the server to
start up. This isn't 100% watertight, there is a small window after
forking the postmaster process, where the signal handler doesn't know the
postmaster's PID yet, but seems good enough.
Arguably this is a long-standing bug, but I refrained from back-batching,
out of fear of breaking someone's scripts that depended on the old
behavior.
Reviewed by Tom Lane. Report and original patch by Paul Guo, with
feedback from Michael Paquier.
Discussion: https://www.postgresql.org/message-id/CAEET0ZH5Bf7dhZB3mYy8zZQttJrdZg_0Wwaj0o1PuuBny1JkEw%40mail.gmail.com
Currently there are two ways to trigger log rotation in logging collector
process: call pg_rotate_logfile() SQL-function or send SIGUSR1 signal directly
to logging collector process. However, it's nice to have more suitable way
for external tools to do that, which wouldn't require SQL connection or
knowledge of logging collector pid. This commit implements triggering log
rotation by "pg_ctl logrotate" command.
Discussion: https://postgr.es/m/20180416.115435.28153375.horiguchi.kyotaro%40lab.ntt.co.jp
Author: Kyotaro Horiguchi, Alexander Kuzmenkov, Alexander Korotkov
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Add support for huge pages (called large pages on Windows) to the
Windows build.
This (probably) breaks compatibility with Windows versions prior to
Windows 2003 or Windows Vista.
Authors: Takayuki Tsunakawa and Thomas Munro
Reviewed by: Magnus Hagander, Amit Kapila
This continues the work of commit 91aec93e6 by getting rid of a lot of
Windows-specific funny business in "section 0". Instead of including
pg_config_os.h in different places depending on platform, let's
standardize on putting it before the system headers, and in consequence
reduce win32.h to just what has to appear before the system headers or
the body of c.h (the latter category seems to include only PGDLLIMPORT
and PGDLLEXPORT). The rest of what was in win32.h is moved to a new
sub-include of port.h, win32_port.h. Some of what was in port.h seems
to better belong there too.
It's possible that I missed some declaration ordering dependency that
needs to be preserved, but hopefully the buildfarm will find that
out in short order.
Unlike the previous commit, no back-patch, since this is just cleanup
not a prerequisite for a bug fix.
Discussion: https://postgr.es/m/29650.1510761080@sss.pgh.pa.us
Change message for restarting a server from a directory without a PID
file. This accounts for the case where a restart happens after an
initdb. The new message indicates that the start has not completed yet
and might fail.
Author: Jesper Pedersen <jesper.pedersen@redhat.com>
Previously that was disallowed out of an abundance of
caution. Providing KILL support however is helpful to make the
013_crash_restart.pl test portable, and there's no actual issue with
allowing it. SIGABRT, which has similar consequences except it also
dumps core, was already allowed.
Author: Andres Freund
Discussion: https://postgr.es/m/45d42d41-6145-9be1-7261-84acf6d9e344@2ndQuadrant.com
If an operation being waited for does not complete within the timeout,
then exit with a nonzero exit status. This was previously handled
inconsistently.
Traditionally, "pg_ctl start -w" has waited for the server to become
ready to accept connections by attempting a connection once per second.
That has the major problem that connection issues (for instance, a
kernel packet filter blocking traffic) can't be reliably told apart
from server startup issues, and the minor problem that if server startup
isn't quick, we accumulate "the database system is starting up" spam
in the server log. We've hacked around many of the possible connection
issues, but it resulted in ugly and complicated code in pg_ctl.c.
In commit c61559ec3, I changed the probe rate to every tenth of a second.
That prompted Jeff Janes to complain that the log-spam problem had become
much worse. In the ensuing discussion, Andres Freund pointed out that
we could dispense with connection attempts altogether if the postmaster
were changed to report its status in postmaster.pid, which "pg_ctl start"
already relies on being able to read. This patch implements that, teaching
postmaster.c to report a status string into the pidfile at the same
state-change points already identified as being of interest for systemd
status reporting (cf commit 7d17e683f). pg_ctl no longer needs to link
with libpq at all; all its functions now depend on reading server files.
In support of this, teach AddToDataDirLockFile() to allow addition of
postmaster.pid lines in not-necessarily-sequential order. This is needed
on Windows where the SHMEM_KEY line will never be written at all. We still
have the restriction that we don't want to truncate the pidfile; document
the reasons for that a bit better.
Also, fix the pg_ctl TAP tests so they'll notice if "start -w" mode
is broken --- before, they'd just wait out the sixty seconds until
the loop gives up, and then report success anyway. (Yes, I found that
out the hard way.)
While at it, arrange for pg_ctl to not need to #include miscadmin.h;
as a rather low-level backend header, requiring that to be compilable
client-side is pretty dubious. This requires moving the #define's
associated with the pidfile into a new header file, and moving
PG_BACKEND_VERSIONSTR someplace else. For lack of a clearly better
"someplace else", I put it into port.h, beside the declaration of
find_other_exec(), since most users of that macro are passing the value to
find_other_exec(). (initdb still depends on miscadmin.h, but at least
pg_ctl and pg_upgrade no longer do.)
In passing, fix main.c so that PG_BACKEND_VERSIONSTR actually defines the
output of "postgres -V", which remarkably it had never done before.
Discussion: https://postgr.es/m/CAMkU=1xJW8e+CTotojOMBd-yzUvD0e_JZu2xHo=MnuZ4__m7Pg@mail.gmail.com
pg_ctl has traditionally waited one second between probes for whether
the start or stop request has completed. That behavior was embodied
in the original shell script written in 1999 (commit 5b912b089) and
I doubt anyone's questioned it since. Nowadays, machines are a lot
faster, and the shell script is long since replaced by C code, so it's
fair to reconsider how long we ought to wait.
This patch adjusts the coding so that the wait time can be any even
divisor of 1 second, and sets the actual probe rate to 10 per second.
That's based on experimentation with the src/test/recovery TAP tests,
which include a lot of postmaster starts and stops. This patch alone
reduces the (non-parallelized) runtime of those tests from ~4m30s to
~3m5s on my machine. Increasing the probe rate further doesn't help
much, so this seems like a good number.
In the real world this probably won't have much impact, since people
don't start/stop production postmasters often, and the shutdown checkpoint
usually takes nontrivial time too. But it makes development work and
testing noticeably snappier, and that's good enough reason for me.
Also, by reducing the dead time in postmaster restart sequences, this
change has made it easier to reproduce some bugs that have been lurking
for awhile. Patches for those will follow.
Discussion: https://postgr.es/m/18444.1498428798@sss.pgh.pa.us
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Commit 05cd12ed5 ("pg_ctl: Change default to wait for all actions")
was a tad sloppy about updating the documentation to match. The
documentation was also sorely in need of a copy-editing pass, having
been adjusted at different times by different people who took little
care to maintain consistency of style.
c.h #includes a number of core libc header files, such as <stdio.h>.
There's no point in re-including these after having read postgres.h,
postgres_fe.h, or c.h; so remove code that did so.
While at it, also fix some places that were ignoring our standard pattern
of "include postgres[_fe].h, then system header files, then other Postgres
header files". While there's not any great magic in doing it that way
rather than system headers last, it's silly to have just a few files
deviating from the general pattern. (But I didn't attempt to enforce this
globally, only in files I was touching anyway.)
I'd be the first to say that this is mostly compulsive neatnik-ism,
but over time it might save enough compile cycles to be useful.
The different actions in pg_ctl had different defaults for -w and -W,
mostly for historical reasons. Most users will want the -w behavior, so
make that the default.
Remove the -w option in most example and test code, so avoid confusion
and reduce verbosity. pg_upgrade is not touched, so it can continue to
work with older installations.
Reviewed-by: Beena Emerson <memissemerson@gmail.com>
Reviewed-by: Ryan Murphy <ryanfmurphy@gmail.com>
The previous patch broke this by returning NULL for a failed CRC check,
which pg_controldata would then try to read. Fix by returning the
result of the CRC check in a separate argument.
Michael Paquier and myself
When waiting is selected for the promote action, look into pg_control
until the state changes, then use the PQping-based waiting until the
server is reachable.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
pg_ctl used to determine whether a server was in standby mode by looking
for a recovery.conf file. With this change, it instead looks into
pg_control, which is potentially more accurate. There are also
occasional discussions about removing recovery.conf, so this removes one
dependency.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
A thinko in a96761391 caused pg_ctl to get it exactly backwards when
deciding whether to report problems to the Windows eventlog or to stderr.
Per bug #14001 from Manuel Mathar, who also identified the fix.
Like the previous patch, back-patch to all supported branches.
Many automated test suites call pg_ctl. Buildfarm members axolotl,
hornet, mandrill, shearwater, sungazer and tern have failed when server
shutdown took longer than the pg_ctl default 60s timeout. This addition
permits slow hosts to easily raise the timeout without us editing a
--timeout argument into every test suite pg_ctl call. Back-patch to 9.1
(all supported versions) for the sake of automated testing.
Reviewed by Tom Lane.
Peter Eisentraut