This fixes two sets of issues related to the use of transient files in
the backend:
1) OpenTransientFile() has been used in some code paths with read-write
flags while read-only is sufficient, so switch those calls to be
read-only where necessary. These have been reported by Joe Conway.
2) When opening transient files, it is up to the caller to close the
file descriptors opened. In error code paths, CloseTransientFile() gets
called to clean up things before issuing an error. However in normal
exit paths, a lot of callers of CloseTransientFile() never actually
reported errors, which could leave a file descriptor open without
knowing about it. This is an issue I complained about a couple of
times, but never had the courage to write and submit a patch, so here we
go.
Note that one frontend code path is impacted by this commit so as an
error is issued when fetching control file data, making backend and
frontend to be treated consistently.
Reported-by: Joe Conway, Michael Paquier
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Georgios Kokolatos, Joe Conway
Discussion: https://postgr.es/m/20190301023338.GD1348@paquier.xyz
Discussion: https://postgr.es/m/c49b69ec-e2f7-ff33-4f17-0eaa4f2cef27@joeconway.com
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
This bug causes a lseek() failure to be reported as a "could not open"
failure in the error message, muddling bug reports. I introduced this
copy-and-pasteo in commit 78e1220104.
Noticed while reviewing code for bug report #15221, from lily liang. In
version 10 the affected function is only used by multixact.c and
commit_ts, and only in corner-case circumstances, neither of which are
involved in the reported bug (a pg_subtrans failure.)
Author: Álvaro Herrera
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
The file handling functions from fd.c were called with a diverse mix of
notations for the file permissions when they were opening new files.
Almost all files created by the server should have the same permissions
set. So change the API so that e.g. OpenTransientFile() automatically
uses the standard permissions set, and OpenTransientFilePerm() is a new
function that takes an explicit permissions set for the few cases where
it is needed. This also saves an unnecessary argument for call sites
that are just opening an existing file.
While we're reviewing these APIs, get rid of the FileName typedef and
use the standard const char * for the file name and mode_t for the file
mode. This makes these functions match other file handling functions
and removes an unnecessary layer of mysteriousness. We can also get rid
of a few casts that way.
Author: David Steele <david@pgmasters.net>
SLRU buffer lwlocks are allocated twice by oversight in commit
fe702a7b3f where that locks were moved to
separate tranche. The bug doesn't have user-visible effects except small
overspending of shared memory.
Backpatch to 9.6 where it was introduced.
Alexander Korotkov with small editorization by me.
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4d wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
Previous commits, notably 53be0b1add and
6f3bd98ebf, made it possible to see from
pg_stat_activity when a backend was stuck waiting for another backend,
but it's also fairly common for a backend to be stuck waiting for an
I/O. Add wait events for those operations, too.
Rushabh Lathia, with further hacking by me. Reviewed and tested by
Michael Paquier, Amit Kapila, Rajkumar Raghuwanshi, and Rahila Syed.
Discussion: http://postgr.es/m/CAGPqQf0LsYHXREPAZqYGVkDqHSyjf=KsD=k0GTVPAuzyThh-VQ@mail.gmail.com
array_base and array_stride were added so that we could identify the
offset of an LWLock within a tranche, but this facility is only very
marginally used apart from the main tranche. So, give every lock in
the main tranche its own tranche ID and get rid of array_base,
array_stride, and all that's attached. For debugging facilities
(Trace_lwlocks and LWLOCK_STATS) print the pointer address of the
LWLock using %p instead of the offset. This is arguably more useful,
and certainly a lot cheaper. Drop the offset-within-tranche from
the information reported to dtrace and from one can't-happen message
inside lwlock.c.
The main user-visible impact of this change is that pg_stat_activity
will now report all waits for LWLocks as "LWLock" rather than
reporting some as "LWLockTranche" and others as "LWLockNamed".
The main motivation for this change is that the need to specify an
array_base and an array_stride is awkward for parallel query. There
is only a very limited supply of tranche IDs so we can't just keep
allocating new ones, and if we try to use the same tranche IDs every
time then we run into trouble when multiple parallel contexts are
use simultaneously. So if we didn't get rid of this mechanism we'd
have to make it even more complicated. By simplifying it in this
way, we instead reduce the size of the generated code for lwlock.c
by about 5%.
Discussion: http://postgr.es/m/CA+TgmoYsFn6NUW1x0AZtupJGUAs1UDY4dJtCN47_Q6D0sP80PA@mail.gmail.com
This makes it significantly easier to identify these lwlocks in
LWLOCK_STATS or Trace_lwlocks output. It's also arguably better
from a modularity standpoint, since lwlock.c no longer needs to
know anything about the LWLock needs of the higher-level SLRU
facility.
Ildus Kurbangaliev, reviewd by Álvaro Herrera and by me.
The fact that multixact truncations are not WAL logged has caused a fair
share of problems. Amongst others it requires to do computations during
recovery while the database is not in a consistent state, delaying
truncations till checkpoints, and handling members being truncated, but
offset not.
We tried to put bandaids on lots of these issues over the last years,
but it seems time to change course. Thus this patch introduces WAL
logging for multixact truncations.
This allows:
1) to perform the truncation directly during VACUUM, instead of delaying it
to the checkpoint.
2) to avoid looking at the offsets SLRU for truncation during recovery,
we can just use the master's values.
3) simplify a fair amount of logic to keep in memory limits straight,
this has gotten much easier
During the course of fixing this a bunch of additional bugs had to be
fixed:
1) Data was not purged from memory the member's SLRU before deleting
segments. This happened to be hard or impossible to hit due to the
interlock between checkpoints and truncation.
2) find_multixact_start() relied on SimpleLruDoesPhysicalPageExist - but
that doesn't work for offsets that haven't yet been flushed to
disk. Add code to flush the SLRUs to fix. Not pretty, but it feels
slightly safer to only make decisions based on actual on-disk state.
3) find_multixact_start() could be called concurrently with a truncation
and thus fail. Via SetOffsetVacuumLimit() that could lead to a round
of emergency vacuuming. The problem remains in
pg_get_multixact_members(), but that's quite harmless.
For now this is going to only get applied to 9.5+, leaving the issues in
the older branches in place. It is quite possible that we need to
backpatch at a later point though.
For the case this gets backpatched we need to handle that an updated
standby may be replaying WAL from a not-yet upgraded primary. We have to
recognize that situation and use "old style" truncation (i.e. looking at
the SLRUs) during WAL replay. In contrast to before, this now happens in
the startup process, when replaying a checkpoint record, instead of the
checkpointer. Doing truncation in the restartpoint is incorrect, they
can happen much later than the original checkpoint, thereby leading to
wraparound. To avoid "multixact_redo: unknown op code 48" errors
standbys would have to be upgraded before primaries.
A later patch will bump the WAL page magic, and remove the legacy
truncation codepaths. Legacy truncation support is just included to make
a possible future backpatch easier.
Discussion: 20150621192409.GA4797@alap3.anarazel.de
Reviewed-By: Robert Haas, Alvaro Herrera, Thomas Munro
Backpatch: 9.5 for now
Transactions can now set their commit timestamp directly as they commit,
or an external transaction commit timestamp can be fed from an outside
system using the new function TransactionTreeSetCommitTsData(). This
data is crash-safe, and truncated at Xid freeze point, same as pg_clog.
This module is disabled by default because it causes a performance hit,
but can be enabled in postgresql.conf requiring only a server restart.
A new test in src/test/modules is included.
Catalog version bumped due to the new subdirectory within PGDATA and a
couple of new SQL functions.
Authors: Álvaro Herrera and Petr Jelínek
Reviewed to varying degrees by Michael Paquier, Andres Freund, Robert
Haas, Amit Kapila, Fujii Masao, Jaime Casanova, Simon Riggs, Steven
Singer, Peter Eisentraut
This makes it possible to store lwlocks as part of some other data
structure in the main shared memory segment, or in a dynamic shared
memory segment. There is still a main LWLock array and this patch does
not move anything out of it, but it provides necessary infrastructure
for doing that in the future.
This change is likely to increase the size of LWLockPadded on some
platforms, especially 32-bit platforms where it was previously only
16 bytes.
Patch by me. Review by Andres Freund and KaiGai Kohei.
Original users of slru.c were all producing 4-digit filenames, so that
was all that that code was prepared to handle. Changes to multixact.c
in the course of commit 0ac5ad5134 made pg_multixact/members create
5-digit filenames once a certain threshold was reached, which
SlruScanDirectory wasn't prepared to deal with; in particular,
5-digit-name files were not removed during truncation. Change that
routine to make it aware of those files, and have it process them just
like any others.
Right now, some pg_multixact/members directories will contain a mixture
of 4-char and 5-char filenames. A future commit is expected fix things
so that each slru.c user declares the correct maximum width for the
files it produces, to avoid such unsightly mixtures.
Noticed while investigating bug #8673 reported by Serge Negodyuck.
In pg_multixact/members, relying on modulo-2^32 arithmetic for
wraparound handling doesn't work all that well. Because we don't
explicitely track wraparound of the allocation counter for members, it
is possible that the "live" area exceeds 2^31 entries; trying to remove
SLRU segments that are "old" according to the original logic might lead
to removal of segments still in use. To fix, have the truncation
routine use a tailored SlruScanDirectory callback that keeps track of
the live area in actual use; that way, when the live range exceeds 2^31
entries, the oldest segments still live will not get removed untimely.
This new SlruScanDir callback needs to take care not to remove segments
that are "in the future": if new SLRU segments appear while the
truncation is ongoing, make sure we don't remove them. This requires
examination of shared memory state to recheck for false positives, but
testing suggests that this doesn't cause a problem. The original coding
didn't suffer from this pitfall because segments created when truncation
is running are never considered to be removable.
Per Andres Freund's investigation of bug #8673 reported by Serge
Negodyuck.
When upgrading from servers of versions 9.2 and older, and MultiXactIds
have been used in the old server beyond the first page (that is, 2048
multis or more in the default 8kB-page build), pg_upgrade would set the
next multixact offset to use beyond what has been allocated in the new
cluster. This would cause a failure the first time the new cluster
needs to use this value, because the pg_multixact/offsets/ file wouldn't
exist or wouldn't be large enough. To fix, ensure that the transient
server instances launched by pg_upgrade extend the file as necessary.
Per report from Jesse Denardo in
CANiVXAj4c88YqipsyFQPboqMudnjcNTdB3pqe8ReXqAFQ=HXyA@mail.gmail.com
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
Files opened with BasicOpenFile or PathNameOpenFile are not automatically
cleaned up on error. That puts unnecessary burden on callers that only want
to keep the file open for a short time. There is AllocateFile, but that
returns a buffered FILE * stream, which in many cases is not the nicest API
to work with. So add function called OpenTransientFile, which returns a
unbuffered fd that's cleaned up like the FILE* returned by AllocateFile().
This plugs a few rare fd leaks in error cases:
1. copy_file() - fixed by by using OpenTransientFile instead of BasicOpenFile
2. XLogFileInit() - fixed by adding close() calls to the error cases. Can't
use OpenTransientFile here because the fd is supposed to persist over
transaction boundaries.
3. lo_import/lo_export - fixed by using OpenTransientFile instead of
PathNameOpenFile.
In addition to plugging those leaks, this replaces many BasicOpenFile() calls
with OpenTransientFile() that were not leaking, because the code meticulously
closed the file on error. That wasn't strictly necessary, but IMHO it's good
for robustness.
The same leaks exist in older versions, but given the rarity of the issues,
I'm not backpatching this. Not yet, anyway - it might be good to backpatch
later, after this mechanism has had some more testing in master branch.
Previously, the code assumed that the only possible action to take was
to delete files behind a certain cutoff point. The async notify code
was already a crock: it used a different "pagePrecedes" function for
truncation than for regular operation. By allowing it to pass a
callback to SlruScanDirectory it can do cleanly exactly what it needs to
do.
The clog.c code also had its own use for SlruScanDirectory, which is
made a bit simpler with this.
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
Instead, declare a public wrapper of the sole function using it for
external callers, so that they don't have to always pass a NULL
argument.
Author: Kevin Grittner
rather than returning NULL for some-but-not-all failures as they used to.
Remove now-redundant tests for NULL from call sites.
We had to do something about this because many call sites were failing to
check for NULL; and changing it like this seems a lot more useful and
mistake-proof than adding checks to the call sites without them.
In addition, add support for a "payload" string to be passed along with
each notify event.
This implementation should be significantly more efficient than the old one,
and is also more compatible with Hot Standby usage. There is not yet any
facility for HS slaves to receive notifications generated on the master,
although such a thing is possible in future.
Joachim Wieland, reviewed by Jeff Davis; also hacked on by me.
Amit Kapila