We missed performing table sync if the invalidation happened while the
non-ready tables list was being prepared. This occurs because the sync
state was set to valid at the end of non-ready table list preparation
irrespective of the invalidations processed while the list is being
prepared.
Fix it by changing the boolean variable to a tri-state enum and by setting
table state to valid only if no invalidations have occurred while the list
is being prepared.
Reprted-by: Alexander Lakhin
Diagnosed-by: Alexander Lakhin
Author: Vignesh C
Reviewed-by: Hou Zhijie, Alexander Lakhin, Ajin Cherian, Amit Kapila
Backpatch-through: 15
Discussion: https://postgr.es/m/711a6afe-edb7-1211-cc27-1bef8239eec7@gmail.com
The SSL_R_VERSION_TOO_LOW error reason is supported in LibreSSL since
LibreSSL 3.6.3, shipped in OpenBSD 7.2. SSL_R_VERSION_TOO_HIGH is on
the other hand not supported in any version of LibreSSL. Previously
we only checked for SSL_R_VERSION_TOO_HIGH and then applied both under
that guard since OpenSSL has only ever supported both at the same time.
This breaks the check into one per reason to allow SSL_R_VERSION_TOO_LOW
to work when using LibreSSL.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/eac70d46-e61c-4d71-a1e1-78e2bfa19485@eisentraut.org
LibreSSL doesn't support the SSL_OP_NO_RENEGOTIATION macro which is
used by OpenSSL, instead it has invented a similar one for client-
side renegotiation: SSL_OP_NO_CLIENT_RENEGOTIATION. This has been
supported since LibreSSL 2.5.1 which by now can be considered well
below the minimum requirement.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/eac70d46-e61c-4d71-a1e1-78e2bfa19485@eisentraut.org
JsonExprState.input_finfo is only assigned to, never read, and
it's really fairly useless since the value can be gotten out of
the adjacent input_fcinfo field. Let's remove it before someone
starts to depend on it.
While here, also remove TidScanState.tss_htup and AggState.combinedproj,
which are referenced nowhere. Those should have been removed by the
commits that caused them to become disused, but were not.
I don't think a catversion bump is necessary here, since plan trees
are never stored on disk.
Matthias van de Meent
Discussion: https://postgr.es/m/CAEze2WjsY4d0TBymLNGK4zpttUcg_YZaTjyWz2VfDUV6YH8wXQ@mail.gmail.com
Do not allow ALTER SUBSCRIPTION ... SET (failover = on|off) in a
transaction block as the changed failover option of the slot can't be
rolled back. For the same reason, we refrain from altering the replication
slot's failover property if the subscription is created with a valid
slot_name and create_slot=false.
Reprted-by: Kuroda Hayato
Author: Hou Zhijie
Reviewed-by: Shveta Malik, Bertrand Drouvot, Kuroda Hayato
Discussion: https://postgr.es/m/OS0PR01MB57165542B09DFA4943830BF294082@OS0PR01MB5716.jpnprd01.prod.outlook.com
Certain cases involving the use of cursors had assertion failures within
_bt_preprocess_keys's recently added no-op return path. The assertion
in question made the faulty assumption that a second or third call to
_bt_preprocess_keys (within the same btrescan) could only happen when
another scheduled primitive index scan was just about to begin.
It would be possible to address the problem by only allowing scans that
have array keys to take the new no-op path, forcing affected cases to
perform redundant preprocessing work. It seems simpler to just remove
the assertion, and reframe the no-op path as a more general mechanism.
Take this simpler approach.
The important underlying principle is that we only need to perform
preprocessing once per btrescan (at most). This is expected regardless
of whether or not the scan happens to have array keys.
Oversight in commit 1b134ca5, which enhanced nbtree ScalarArrayOp
execution.
Reported-By: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/ef0f7c8b-a6fa-362e-6fd6-054950f947ca@gmail.com
When specifying the createdb strategy, the documentation suggests valid
options are FILE_COPY and WAL_LOG, but the code does case-sensitive
comparison and accepts only "file_copy" and "wal_log" as valid.
Fixed by doing a case-insensitive comparison using pg_strcasecmp(), same
as for other string parameters nearby.
While at it, apply fmtId() to a nearby "locale_provider". This already
did the comparison in case-insensitive way, but the value would not be
double-quoted, confusing the parser and the error message.
Backpatch to 15, where the strategy was introduced.
Backpatch-through: 15
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/90c6913a-1dd2-42b4-8365-ce3b09c39b17@enterprisedb.com
The optimization for inserts into BRIN indexes added by c1ec02be1d
relies on a cache that needs to be explicitly released after calling
index_insert(). The commit however failed to invoke the cleanup in
validate_index(), which calls index_insert() indirectly through
table_index_validate_scan().
After inspecting index_insert() callers, it seems unique_key_recheck()
is missing the call too.
Fixed by adding the two missing index_insert_cleanup() calls.
The commit does two additional improvements. The aminsertcleanup()
signature is modified to have the index as the first argument, to make
it more like the other AM callbacks. And the aminsertcleanup() callback
is invoked even if the ii_AmCache is NULL, so that it can decide if the
cleanup is necessary.
Author: Alvaro Herrera, Tomas Vondra
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/202401091043.e3nrqiad6gb7@alvherre.pgsql
It is possible for certain cases to remove not-null constraints without
maintaining the attnotnull in its correct state; for example if you drop
a column that's part of the primary key, and the other columns of the PK don't
have not-null constraints, then we should reset the attnotnull flags for
those other columns; up to this commit, we didn't. Handle those cases
better by doing the attnotnull reset in RemoveConstraintById() instead
of in dropconstraint_internal().
However, there are some cases where we must not do so. For example if
those other columns are in replica identity indexes or are generated
identity columns, we must keep attnotnull set, even though it results in
the catalog inconsistency that no not-null constraint supports that.
Because the attnotnull reset now happens in more places than before, for
instance when a column of the primary key changes type, we need an
additional trick to reinstate it as necessary. Introduce a new
alter-table pass that does this, which needs simply reschedule some
AT_SetAttNotNull subcommands that were already being generated and
ignored.
Because of the exceptions in which attnotnull is not reset noted above,
we also include a pg_dump hack to include a not-null constraint when the
attnotnull flag is set even if no pg_constraint row exists. This part
is undesirable but necessary, because failing to handle the case can
result in unrestorable dumps.
Reported-by: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAHewXN=hMbNa3d43NOR=OCgdgpTt18S-1fmueCoEGesyeK4bqw@mail.gmail.com
This fixes various typos, duplicated words, and tiny bits of whitespace
mainly in code comments but also in docs.
Author: Daniel Gustafsson <daniel@yesql.se>
Author: Heikki Linnakangas <hlinnaka@iki.fi>
Author: Alexander Lakhin <exclusion@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/3F577953-A29E-4722-98AD-2DA9EFF2CBB8@yesql.se
Preprocessing for nbtree index scans allowed array "input" scan keys
already marked eliminated during array-specific preprocessing to be
"fixed up" during preprocessing proper. This allowed eliminated scan
keys on DESC index columns to spurious have their strategy commuted,
causing assertion failures.
To fix, teach _bt_fix_scankey_strategy to ignore these scan keys. This
brings it in line with its only caller, _bt_preprocess_keys.
Oversight in commit 5bf748b8, which enhanced nbtree ScalarArrayOp
execution.
Reported-By: Donghang Lin <donghanglin@gmail.com>
Discussion: https://postgr.es/m/CAA=D8a2sHK6CAzZ=0CeafC-Y-MFXbYxnRSHvZTi=+JHu6kAa8Q@mail.gmail.com
In tables with primary keys, pg_dump creates tables with primary keys by
initially dumping them with throw-away not-null constraints (marked "no
inherit" so that they don't create problems elsewhere), to later drop
them once the primary key is restored. Because of a unrelated
consideration, on tables with children we add not-null constraints to
all columns of the primary key when it is created.
If both a table and its child have primary keys, and pg_dump happens to
emit the child table first (and its throw-away not-null) and later its
parent table, the creation of the parent's PK will fail because the
throw-away not-null constraint collides with the permanent not-null
constraint that the PK wants to add, so the dump fails to restore.
We can work around this problem by letting the primary key "take over"
the child's not-null. This requires no changes to pg_dump, just two
changes to ALTER TABLE: first, the ability to convert a no-inherit
not-null constraint into a regular inheritable one (including recursing
down to children, if there are any); second, the ability to "drop" a
constraint that is defined both directly in the table and inherited from
a parent (which simply means to mark it as no longer having a local
definition).
Secondarily, change ATPrepAddPrimaryKey() to acquire locks all the way
down the inheritance hierarchy, in case we need to recurse when
propagating constraints.
These two changes allow pg_dump to reproduce more cases involving
inheritance from versions 16 and older.
Lastly, make two changes to pg_dump: 1) do not try to drop a not-null
constraint that's marked as inherited; this allows a dump to restore
with no errors if a table with a PK inherits from another which also has
a PK; 2) avoid giving inherited constraints throwaway names, for the
rare cases where such a constraint survives after the restore.
Reported-by: Andrew Bille <andrewbille@gmail.com>
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CAJnzarwkfRu76_yi3dqVF_WL-MpvT54zMwAxFwJceXdHB76bOA@mail.gmail.com
Discussion: https://postgr.es/m/Zh0aAH7tbZb-9HbC@pryzbyj2023
This addresses some post-commit review comments for commits 6185c973,
de3600452, and 9425c596a0, with the following changes:
* Fix JSON_TABLE() syntax documentation to use the term
"path_expression" for JSON path expressions instead of
"json_path_specification" to be consistent with the other SQL/JSON
functions.
* Fix a typo in the example code in JSON_TABLE() documentation.
* Rewrite some newly added comments in jsonpath.h.
* In JsonPathQuery(), add missing cast to int before printing an enum
value.
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
SQL/JSON query functions allow specifying an expression to return
when either of ON ERROR or ON EMPTY condition occurs when evaluating
the JSON path expression. The parser (transformJsonBehavior()) checks
that the specified expression is one of the supported expressions, but
there are two issues with how the check is done that are fixed in this
commit:
* No check for some expressions related to coercion, such as
CoerceViaIO, that may appear in the transformed user-specified
expressions that include cast(s)
* An unsupported expression may be masked by a coercion-related
expression, which must be flagged by checking the latter's
argument expression recursively
Author: Jian He <jian.universality@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxEqhqsfrg_p7EMyo5zak3d767iFDL8vz_4%3DZBHpOtrghw@mail.gmail.com
Discussion: https://postgr.es/m/CACJufxGOerH1QJknm1noh-Kz5FqU4p7QfeZSeVT2tN_4SLXYNg@mail.gmail.com
This improves some error messages emitted by SQL/JSON query functions
by mentioning column name when available, such as when they are
invoked as part of evaluating JSON_TABLE() columns. To do so, a new
field column_name is added to both JsonFuncExpr and JsonExpr that is
only populated when creating those nodes for transformed JSON_TABLE()
columns.
While at it, relevant error messages are reworded for clarity.
Reported-by: Jian He <jian.universality@gmail.com>
Suggested-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CACJufxG_e0QLCgaELrr2ZNz7AxPeGCNKAORe3fHtFCQLsH4J4Q@mail.gmail.com
fefd9a3fed turned tail recursion of CommitTransactionCommand() and
AbortCurrentTransaction() into iteration. However, it splits the handling of
cases between different functions.
This commit puts the handling of all the cases into
AbortCurrentTransactionInternal() and CommitTransactionCommandInternal().
Now CommitTransactionCommand() and AbortCurrentTransaction() are just doing
the repeated calls of internal functions.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240415224834.w6piwtefskoh32mv%40awork3.anarazel.de
Author: Andres Freund
GlobalVisTestNonRemovableHorizon() was only used for the implementation of
snapshot_too_old, which was removed in f691f5b80a. As using
GlobalVisTestNonRemovableHorizon() is not particularly efficient, no new uses
for it should be added. Therefore remove.
Discussion: https://postgr.es/m/20240415185720.q4dg4dlcyvvrabz4@awork3.anarazel.de
Commit b437571714 added support for parallel builds of BRIN indexes,
using code similar to BTREE. But there were to be a couple unnecessary
differences, particularly in how the leader waits for the workers, and
merges the results. So remove these, to make the code more similar.
The leader never waited on the workersdonecv condition variable, but
simply called WaitForParallelWorkersToFinish() in _brin_end_parallel()
and then merged the per-worker results. This worked correctly, but it
seems better to do the wait and merge before _brin_end_parallel().
This commit moves the relevant code to _brin_parallel_heapscan/merge(),
which means _brin_end_parallel() remains responsible only for exiting
the parallel mode and accumulating WAL usage data.
Discussion: https://postgr.es/m/3733d042-71e1-6ae6-5fac-00c12db62db6@enterprisedb.com
The configure check for HAVE_DECL_LLVMORCREGISTERPERF was removed by
e9a9843e13, but some code guarded by it was left. (That commit
removed the "register" calls but left the "unregister" calls.) That
code cannot be reached anymore, so remove it.
Reported-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/5539b16c-cff7-46d5-9621-c3fb6b549e9e@iki.fi
The ON_ERROR option of the COPY command previously allowed omitting
its value, which was inconsistent with the syntax synopsis in the
documentation and the behavior of other non-boolean COPY options.
This change enforces providing a value for the ON_ERROR option,
ensuring consistency across other non-boolean options and aligning
with the documented syntax.
Author: Atsushi Torikoshi
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/a9770bf57646d90dedc3d54cf32634b2%40oss.nttdata.com
BumpContext relies on using the head block from its 'blocks' field to
use as the current block to allocate new chunks to. When we receive an
allocation request larger than allocChunkLimit, we place these chunks on
a new dedicated block and, until now, we pushed the block onto the
*head* of the 'blocks' list.
This behavior caused the previous bump block to no longer be available
for new normal-sized (non-large) allocations and would result in blocks
only being partially filled if a large allocation request arrived before
the block became full.
Here adjust the code to push these dedicated blocks onto the *tail* of
the blocks list so that the head block remains intact and available to
be used by normal allocation request sizes until it becomes full.
In passing, make the elog(ERROR) calls for the unsupported callbacks
consistent. Likewise for the header comments for those functions.
Discussion: https://postgr.es/m/CAApHDvp9___r-ayJj0nZ6GD3MeCGwGZ0_6ZptWpwj+zqHtmwCw@mail.gmail.com
Discussion: https://postgr.es/m/CAApHDvqerXpzUnuDQfUEi3DZA+9=Ud9WSt3ruxN5b6PcOosx2g@mail.gmail.com
When building a join clause derived from an EquivalenceClass, if the
clause is to be used with an appendrel child relation then make sure
its clause_relids include the relids of that child relation.
Normally this would be true already because the EquivalenceMember
would be a Var of that relation. However, if the appendrel represents
a flattened UNION ALL construct then some child EquivalenceMembers
could be constants with no relids. The resulting under-marked clause
is problematic because it could mislead join_clause_is_movable_into
about where the clause should be evaluated. We do not have an example
showing incorrect plan generation, but there are existing cases in
the regression tests that will fail the Asserts this patch adds to
get_baserel_parampathinfo. A similarly wrong conclusion about a
clause being considered by get_joinrel_parampathinfo would lead to
wrong placement of the clause. (This also squares with the way
that clause_relids is calculated for non-equijoin clauses in
adjust_appendrel_attrs.)
The other reason for wanting these new Asserts is that the previous
blithe assumption that the results of generate_join_implied_equalities
"necessarily satisfy join_clause_is_movable_into" turns out to be
wrong pre-v16. If it's still wrong it'd be good to find out.
Per bug #18429 from Benoît Ryder. The bug as filed was fixed by
commit 2489d76c4, but these changes correlate with the fix we
will need to apply in pre-v16 branches.
Discussion: https://postgr.es/m/18429-8982d4a348cc86c6@postgresql.org
Commit 2ed8f9a01 intended to institute a policy that if a
RangeTblFunction has a coldeflist, then the function return type is
certainly RECORD, and we should use the coldeflist as the source of
truth about what the columns of the record type are. When the
original function has been folded to a constant, inspection of the
constant might give a different answer. This situation will lead to
a tuple-type-mismatch error at execution, but up until that point we
need to consistently believe the coldeflist, or we'll have problems
from different bits of code reaching different conclusions.
expandRTE didn't get that memo though, and would try to produce a
tupdesc based on the constant in this situation, leading to an
assertion failure. (Desultory testing suggests that non-assert
builds often manage to give the expected error, although I also
saw a "cache lookup failed for type 0" error, and it seems at
least possible that a crash could happen.)
Some other callers of get_expr_result_type and get_expr_result_tupdesc
were also being incautious about this. While none of them seem to
have actual bugs, they're working harder than necessary in this case,
besides which it seems safest to have an explicit policy of not using
those functions on an RTE with a coldeflist. Adjust the code
accordingly, and add commentary to funcapi.c about this policy.
Also fix an obsolete comment that claimed "get_expr_result_type()
doesn't know how to extract type info from a RECORD constant".
That hasn't been true since commit d57534740.
Per bug #18422 from Alexander Lakhin.
As with the previous commit, back-patch to all supported branches.
Discussion: https://postgr.es/m/18422-89ca86c8eac5246d@postgresql.org
When matching constraints in AttachPartitionEnsureIndexes() we weren't
testing the constraint type, which could make a UNIQUE key lacking a
not-null constraint incorrectly satisfy a primary key requirement. Fix
this by testing that the constraint types match. (Other possible
mismatches are verified by comparing index properties.)
Discussion: https://postgr.es/m/202402051447.wimb4xmtiiyb@alvherre.pgsql
In one of the many strange corner cases of multiple inheritance being
used, commit b0e96f3119 missed a CommandCounterIncrement() call after
updating the attnotnull flag during ALTER TABLE ADD COLUMN, which caused
a catalog tuple to be update attempted twice in the same command, giving
rise to a "tuple already updated by self" error. Add the missing call
to solve that, and a test case that reproduces the scenario.
As a (perhaps surprising) secondary effect, this CCI addition triggers
another behavior change: when a primary key is added to a parent
partitioned table and the column in an existing partition does not have
a not-null constraint, we no longer error out. This will probably be a
welcome change by some users, and I think it's unlikely that anybody
will miss the old behavior.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: http://postgr.es/m/045dec3f-9b3d-aa44-0c99-85f6992306c7@gmail.com
This addresses a few problems with commit e5da0fe3c2 ("Catalog domain
not-null constraints").
In CREATE DOMAIN, a NOT NULL constraint looks like
CREATE DOMAIN d1 AS int [ CONSTRAINT conname ] NOT NULL
(Before e5da0fe3c2, the constraint name was accepted but ignored.)
But in ALTER DOMAIN, a NOT NULL constraint looks like
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL VALUE
where VALUE is where for a table constraint the column name would be.
(This works as of e5da0fe3c2. Before e5da0fe3c2, this syntax
resulted in an internal error.)
But for domains, this latter syntax is confusing and needlessly
inconsistent between CREATE and ALTER. So this changes it to just
ALTER DOMAIN d1 ADD [ CONSTRAINT conname ] NOT NULL
(None of these syntaxes are per SQL standard; we are just living with
the bits of inconsistency that have built up over time.)
In passing, this also changes the psql \dD output to not show not-null
constraints in the column "Check", since it's already shown in the
column "Nullable". This has also been off since e5da0fe3c2.
Reviewed-by: jian he <jian.universality@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9ec24d7b-633d-463a-84c6-7acff769c9e8%40eisentraut.org
Commit 10e3226ba1 added padding to incremental backups to ensure the
block data is properly aligned. The code in sendFile() however failed to
consider that the header may be a multiple of BLCKSZ and thus already
aligned, adding a full BLCKSZ of unnecessary padding.
Not only does this make the incremental file a bit larger, but the other
places calculating the amount of padding did realize it's not needed and
did not include it in the formula. This resulted in pg_basebackup
getting confused while parsing the data stream, trying to access files
with invalid filenames (e.g. with binary data etc.) and failing.
Commit 6bcda4a721 replaced PG_DETOAST_DATUM with PG_DETOAST_DATUM_PACKED
in two BRIN output functions, for minmax-multi and bloom opclasses. But
this is incorrect - the code is accessing the data through structs that
already include a 4B header, so the detoast needs to match that. But the
PACKED macro may keep the 1B header, which means the struct fields will
point to incorrect data.
Backpatch-through: 16
Discussion: https://postgr.es/m/1df00a66-db5a-4e66-809a-99b386a06d86%40enterprisedb.com
Properly update the number of bits set in the bitmap after merging the
filters in brin_bloom_union.
This is mostly harmless, as the counter is used only in the output
function, which means pageinspect may show incorrect information about
the BRIN summary. The counter does not affect correctness.
Discovered while adding a regression test comparing indexes built with
and without parallelism. The parallel index builds exercise the union
procedure when merging results from workers, which is otherwise very
hard to do in a test. Which is why this went unnoticed until now.
Backpatch through 14, where the BRIN bloom opclasses were introduced.
Backpatch-through: 14
Discussion: https://postgr.es/m/1df00a66-db5a-4e66-809a-99b386a06d86%40enterprisedb.com
GetPageWithFreeSpace() callers assume the returned block exists in the
main fork, failing with "could not read block" errors if that doesn't
hold. Make that assumption reliable now. It hadn't been guaranteed,
due to the weak WAL and data ordering of participating components. Most
operations on the fsm fork are not WAL-logged. Relation extension is
not WAL-logged. Hence, an fsm-fork block on disk can reference a
main-fork block that no WAL record has initialized. That could happen
after an OS crash, a replica promote, or a PITR restore. wal_log_hints
makes the trouble easier to hit; a replica promote or PITR ending just
after a relevant fsm-fork FPI_FOR_HINT may yield this broken state. The
v16 RelationAddBlocks() mechanism also makes the trouble easier to hit,
since it bulk-extends even without extension lock waiters. Commit
917dc7d239 stopped trouble around
truncation, but vectors involving PageIsNew() pages remained.
This implementation adds a RelationGetNumberOfBlocks() call when the
cached relation size doesn't confirm a block exists. We've been unable
to identify a benchmark that slows materially, but this may show up as
additional time in lseek(). An alternative without that overhead would
be a new ReadBufferMode such that ReadBufferExtended() returns NULL
after a 0-byte read, with all other errors handled normally. However,
each GetFreeIndexPage() caller would then need code for the return-NULL
case. Back-patch to v14, due to earlier versions not caching relation
size and the absence of a pre-v16 problem report.
Ronan Dunklau. Reported by Ronan Dunklau.
Discussion: https://postgr.es/m/1878547.tdWV9SEqCh%40aivenlaptop
Per gripes from Michael Paquier
Discussion: https://postgr.es/m/ZhTQ6_w1vwOhqTQI@paquier.xyz
Along the way, also clean up a handful of typos in 3311ea86ed and
ea7b4e9a2a, found by Alexander Lakhin, and a couple of stylistic
snafus noted by Daniel Westermann and Daniel Gustafsson.
Coverity complained about not freeing some memory associated with
incrementally parsing backup manifests. To fix that, provide and use a new
shutdown function for the JsonManifestParseIncrementalState object, in
line with a suggestion from Tom Lane.
While analysing the problem, I noticed a buglet in freeing memory for
incremental json lexers. To fix that remove a bogus condition on
freeing the memory allocated for them.
Ensure that when updating the catalog_xmin of the synced slots, it is
first written to disk before changing the in-memory value
(effective_catalog_xmin). This is to prevent a scenario where the
in-memory value change triggers a vacuum to remove catalog tuples before
the catalog_xmin is written to disk. In the event of a crash before the
catalog_xmin is persisted, we would not know that some required catalog
tuples have been removed and the synced slot would be invalidated.
Change the sanity check to ensure that remote_slot's confirmed_flush LSN
can't precede the local/synced slot during slot sync. Note that the
restart_lsn of the synced/local slot can be ahead of remote_slot. This can
happen when slot advancing machinery finds a running xacts record after
reaching the consistent state at a later point than the primary where it
serializes the snapshot and updates the restart_lsn.
Make the check to sync slots robust by allowing to sync only when the
confirmed_lsn, restart_lsn, or catalog_xmin of the remote slot is ahead of
the synced/local slot.
Reported-by: Amit Kapila and Shveta Malik
Author: Hou Zhijie, Shveta Malik
Reviewed-by: Amit Kapila, Bertrand Drouvot
Discussion: https://postgr.es/m/OS0PR01MB57162B67D3CB01B2756FBA6D94062@OS0PR01MB5716.jpnprd01.prod.outlook.com
Discussion: https://postgr.es/m/CAJpy0uCSS5zmdyUXhvw41HSdTbRqX1hbYqkOfHNj7qQ+2zn0AQ@mail.gmail.com
b262ad440 added code to have the planner remove redundant IS NOT NULL
quals and eliminate needless scans for IS NULL quals on tables where the
qual's column has a NOT NULL constraint.
That commit failed to consider that an inheritance parent table could
have differing NOT NULL constraints between the parent and the child.
This caused issues as if we eliminated a qual on the parent, when
applying the quals to child tables in apply_child_basequals(), the qual
might not have been added to the parent's baserestrictinfo.
Here we fix this by not applying the optimization to remove redundant
quals to RelOptInfos belonging to inheritance parents and applying the
optimization again in apply_child_basequals(). Effectively, this means
that the parent and child are considered independently as the parent has
both an inh=true and inh=false RTE and we still apply the optimization
to the RelOptInfo corresponding to the inh=false RTE.
We're able to still apply the optimization in add_base_clause_to_rel()
for partitioned tables as the NULLability of partitions must match that
of their parent. And, if we ever expand restriction_is_always_false()
and restriction_is_always_true() to handle partition constraints then we
can apply the same logic as, even in multi-level partitioned tables,
there's no way to route values to a partition when the qual does not
match the partition qual of the partitioned table's parent partition.
The same is true for CHECK constraints as those must also match between
arent partitioned tables and their partitions.
Author: Richard Guo, David Rowley
Discussion: https://postgr.es/m/CAMbWs4930gQSZmjR7aANzEapdy61gCg6z8dT-kAEYD0sYWKPdQ@mail.gmail.com
Amit Kapila