Presently, pg_popcount() processes data in 32-bit or 64-bit chunks
when possible. Newer hardware that supports AVX-512 instructions
can use 512-bit chunks, which provides a nice speedup, especially
for larger buffers. This commit introduces the infrastructure
required to detect compiler and CPU support for the required
AVX-512 intrinsic functions, and it adds a new pg_popcount()
implementation that uses these functions. If CPU support for this
optimized implementation is detected at runtime, a function pointer
is updated so that it is used by subsequent calls to pg_popcount().
Most of the existing in-tree calls to pg_popcount() should benefit
from these instructions, and calls with smaller buffers should at
least not regress compared to v16. The new infrastructure
introduced by this commit can also be used to optimize
visibilitymap_count(), but that is left for a follow-up commit.
Co-authored-by: Paul Amonson, Ants Aasma
Reviewed-by: Matthias van de Meent, Tom Lane, Noah Misch, Akash Shankaran, Alvaro Herrera, Andres Freund, David Rowley
Discussion: https://postgr.es/m/BL1PR11MB5304097DF7EA81D04C33F3D1DCA6A%40BL1PR11MB5304.namprd11.prod.outlook.com
This function served to support having prebuilt files in the source
tree for vpath builds. This is no longer possible (since
721856ff24); all built files are now always in the build tree. The
invocations of this function are no longer required.
Injection points are a new facility that makes possible for developers
to run custom code in pre-defined code paths. Its goal is to provide
ways to design and run advanced tests, for cases like:
- Race conditions, where processes need to do actions in a controlled
ordered manner.
- Forcing a state, like an ERROR, FATAL or even PANIC for OOM, to force
recovery, etc.
- Arbitrary sleeps.
This implements some basics, and there are plans to extend it more in
the future depending on what's required. Hence, this commit adds a set
of routines in the backend that allows developers to attach, detach and
run injection points:
- A code path calling an injection point can be declared with the macro
INJECTION_POINT(name).
- InjectionPointAttach() and InjectionPointDetach() to respectively
attach and detach a callback to/from an injection point. An injection
point name is registered in a shmem hash table with a library name and a
function name, which will be used to load the callback attached to an
injection point when its code path is run.
Injection point names are just strings, so as an injection point can be
declared and run by out-of-core extensions and modules, with callbacks
defined in external libraries.
This facility is hidden behind a dedicated switch for ./configure and
meson, disabled by default.
Note that backends use a local cache to store callbacks already loaded,
cleaning up their cache if a callback has found to be removed on a
best-effort basis. This could be refined further but any tests but what
we have here was fine with the tests I've written while implementing
these backend APIs.
Author: Michael Paquier, with doc suggestions from Ashutosh Bapat.
Reviewed-by: Ashutosh Bapat, Nathan Bossart, Álvaro Herrera, Dilip
Kumar, Amul Sul, Nazir Bilal Yavuz
Discussion: https://postgr.es/m/ZTiV8tn_MIb_H2rE@paquier.xyz
Commit 252dcb3239 introduced initdb template caching to speed up
tests by re-using initdb output. The initdb command didn't however
use the --no-clean option to preserve generated data in case initdb
crashes unlike pg_regress which does do this. This adds the option
to initdb to aid debugging.
While changing the commandline, switch to using long options for
initdb to make the code more self-documenting.
Author: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAEze2WhSTjfK_M+Ea4GSQp8odrEOaQS8HyORd1TJUEiyXaB+rw@mail.gmail.com
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
As of Xcode 15 (macOS Sonoma), the linker complains about duplicate
references to the same library. We see warnings about libpgport and
libpgcommon being duplicated in many client executables. This is a
consequence of the hack introduced in commit 6b7ef076b to list
libpgport before libpq while not removing it from $(LIBS).
(Commit 8396447cd later applied the same rule to libpgcommon.)
The concern in 6b7ef076b was to ensure that the client executable
wouldn't unintentionally depend on pgport functions from libpq.
That concern is obsolete on any platform for which we can do symbol
export control, because if we can then the pgport functions in libpq
won't be exposed anyway. Hence, we can fix this problem by just
removing libpgport and libpgcommon from $(libpq_pgport), and letting
clients depend on the occurrences in $(LIBS).
In the back branches, do that only on macOS (which we know has
symbol export control). In HEAD, let's be more aggressive and
remove the extra libraries everywhere. The only still-supported
platforms that lack export control are MinGW/Cygwin, and it
doesn't seem worth sweating over ABI stability details for those
(or if somebody does care, it'd probably be possible to perform
symbol export control for those too). As well as being simpler,
this might give some microscopic improvement in build time.
The meson build system is not changed here, as it doesn't have
this particular disease, though it does have some related issues
that we'll fix separately.
Discussion: https://postgr.es/m/467042.1695766998@sss.pgh.pa.us
When running all (or just many) of our tests, a significant portion of both
CPU time and IO is spent running initdb. Most of those initdb runs don't
specify any options influencing properties of the created data directory.
Avoid most of that overhead by creating a "template" data directory, alongside
the temporary installation. Instead of running initdb, pg_regress and tap
tests can copy that data directory. When a tap test specifies options to
initdb, the template data directory is not used. That could be relaxed for
some options, but it's not clear it's worth the effort.
There unfortunately is some duplication between pg_regress.c and Cluster.pm,
but there are no easy ways of sharing that code without introducing additional
complexity.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20220120021859.3zpsfqn4z7ob7afz@alap3.anarazel.de
All supported computers have either POSIX or Windows threads, and we no
longer have any automated testing of --disable-thread-safety. We define
a vestigial ENABLE_THREAD_SAFETY macro to 1 in ecpg_config.h in case it
is useful, but we no longer test it anywhere in PostgreSQL code, and
associated dead code paths are removed.
The Meson and perl-based Windows build scripts never had an equivalent
build option.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/CA%2BhUKGLtmexrpMtxBRLCVePqV_dtWG-ZsEbyPrYc%2BNBB2TkNsw%40mail.gmail.com
Commit 153e215677 added the portlock directory. This is created in
$ENV{top_builddir} if it is set. Under PGXS, top_builddir points into
the installation directory, which is not necessarily writable and in
any case inappropriate to use by a test suite. The cause of the
problem is that the prove_installcheck target in Makefile.global
exports top_builddir, which isn't useful (since no other Perl code
actually reads it) and breaks this use case. The reason this code is
there is probably that is has been dragged around with various other
changes, in particular a0fc813266, but without a real purpose of its
own. By just removing the exporting of top_builddir in
prove_installcheck, the portlock directory then ends up under
tmp_check in the build directory, which is more suitable.
Reviewed-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://www.postgresql.org/message-id/78d1cfa6-0065-865d-584b-cde6d8c18aff@enterprisedb.com
This converts pg_regress output format to emit TAP compliant output
while keeping it as human readable as possible for use without TAP
test harnesses. As verbose harness related information isn't really
supported by TAP this also reduces the verbosity of pg_regress runs
which makes scrolling through log output in buildfarm/CI runs a bit
easier as well.
As the meson TAP parser conumes whitespace, the leading indentation
for differentiating parallel tests from sequential tests has been
changed to a single character prefix.
This patch has been around for an extended period of time, reviewers
listed below may have been involved in reviewing a version quite
different from the version in this commit. The original idea for
this patch was a hacking session with Jinbao Chen.
TAP format testing is also enabled in meson as of this.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Nikolay Shaplov <dhyan@nataraj.su>
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/BD4B107D-7E53-4794-ACBA-275BEB4327C9@yesql.se
Discussion: https://postgr.es/m/20220221164736.rq3ornzjdkmwk2wo@alap3.anarazel.de
Previously export_dynamic was set in src/makefiles/Makefile.$port. For solaris
this required exporting with_gnu_ld. The determination of with_gnu_ld would be
nontrivial to copy for meson PGXS compatibility. It's also nice to delete
libtool.m4.
This uses -Wl,--export-dynamic on all platforms, previously all platforms but
FreeBSD used -Wl,-E. The likelihood of a name conflict seems lower with the
longer spelling.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
The only use of $(LD) in Makefiles is for AIX, to generate the export file for
the backend. We only support the system linker on AIX and we already hardcode
the path to a number of other binaries. Removing LD substitution will simplify
the upcoming meson PGXS compatibility.
While at it, add a comment why -r is used.
A subsequent commit will remove the determination of LD from configure as
well.
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Until now we emitted the cflags to build the CRC objects into architecture
specific variables. That doesn't make a whole lot of sense to me - we're never
going to target x86 and arm at the same time, so they don't need to be
separate variables.
It might be better to instead continue to have CFLAGS_SSE42 /
CFLAGS_ARMV8_CRC32C be computed by PGAC_ARMV8_CRC32C_INTRINSICS /
PGAC_SSE42_CRC32_INTRINSICS and then set CFLAGS_CRC based on those. But it
seems unlikely that we'd need other sets of CRC specific flags for those two
architectures at the same time.
This simplifies the upcoming meson PGXS compatibility.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
Currently there is a race condition where if concurrent TAP tests both
test that they can open a port they will assume that it is free and use
it, causing one of them to fail. To prevent this we record a reservation
using an exclusive lock, and any TAP test that discovers a reservation
checks to see if the reserving process is still alive, and looks for
another free port if it is.
Ports are reserved in a directory set by the environment setting
PG_TEST_PORT_DIR, or if that doesn't exist a subdirectory of the top
build directory as set by meson or Makefile.global, or its own
tmp_check directory.
The prove_check recipe in Makefile.global.in is extended to export
top_builddir to the TAP tests. This was already exported by the
prove_installcheck recipes.
Per complaint from Andres Freund
This will be backpatched in due course after some testing.
Discussion: https://postgr.es/m/20221002164931.d57hlutrcz4d2zi7@awork3.anarazel.de
Various test suites use the "openssl" program as part of their setup.
There isn't a way to override which openssl program is to be used,
other than by fiddling with the path, perhaps. This has gotten
increasingly problematic because different versions of openssl have
different capabilities and do different things by default.
This patch checks for an openssl binary in configure and meson setup,
with appropriate ways to override it. This is similar to how "lz4"
and "zstd" are handled, for example. The meson build system actually
already did this, but the result was only used in some places. This
is now applied more uniformly.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/dc638b75-a16a-007d-9e1c-d16ed6cf0ad2%40enterprisedb.com
This way we don't need RANLIB anymore, making it a bit simpler for the meson
build to generate Makefile.global for PGXS compatibility.
FreeBSD, NetBSD, OpenBSD, the only platforms where we didn't use AROPT=crs,
all have supported the 's' option for a long time.
On macOS we ran ranlib after installing a static library. This was added a
long time ago, in 58ad65ec2d. I cannot reproduce an issue in more recent
macOS versions. This is removed now.
Based on discussion with Tom, I left the 'touch' at the end of static
libraries generation, added in 826eff57c4, in place. While it looks like
current versions of Apple's ar/ranlib don't need it, it was needed not too
long ago.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005200710.luvw5evhwf6clig6@awork3.anarazel.de
The motivation for this is twofold. For one the meson patchset would like to
have more control over the logfiles. For another, the log file location for
tap tests (tmp_check/log) is not symmetric to the log location for
pg_regress/isolation tests (log/).
This commit does not change the default location for log files for tap tests,
as that'd break the buildfarm log collection, it just provides the
infrastructure for doing so.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/1131990.1660661896@sss.pgh.pa.us
Discussion: https://postgr.es/m/20220828170806.GN2342@telsasoft.com
This is motivated by the meson patchset, which wants to put the log / data for
tests in a different place than the autoconf build. Right now log files for
tap tests have to be inside $TESTDIR/tmp_check, whereas log files for
pg_regress/isolationtester are outside of tmp_check. This change doesn't fix
the latter, but is a prerequisite.
The only test that needs adjustment is 010_tab_completion.pl, as it hardcoded
the tmp_check/ directory. Instead create a dedicated directory for the test
files. It's also a bit cleaner independently, because it doesn't intermingle
the test files with more important things like the log/ directory.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/1131990.1660661896@sss.pgh.pa.us
Discussion: https://postgr.es/m/d861493c-ed20-c251-7a89-7924f5197341@enterprisedb.com
configure extracts TCL_SHLIB_LD_LIBS from tclConfig.sh, and puts the
value into Makefile.global, but then we never use it anywhere. It
looks like I removed the only usage in cd75f94da, but didn't notice
that it was the only usage. Might as well mop this up while we're
trying to get rid of unnecessary configure steps.
Discussion: https://postgr.es/m/2442359.1660835043@sss.pgh.pa.us
We've long held the minimum at 3.80, but that's required more than
one workaround. Commit 0f39b70a6 broke it again, because it turns
out that exporting a target-specific variable didn't work in 3.80.
Considering that 3.81 is now old enough to get a driver's license,
and that the only remaining buildfarm member testing 3.80 (prairiedog)
is likely to be retired soon, let's just stop supporting 3.80.
Adjust docs and Makefile.global's minimum-version check to match.
There are a couple of comments in the Makefiles suggesting that
random things could be done differently after we desupport 3.80,
but I couldn't get excited about changing any of them right now.
Back-patch to v15, as 0f39b70a6 was.
Discussion: https://postgr.es/m/20220720172321.GL12702@telsasoft.com
Until now postgres built extension libraries with global visibility, i.e.
exporting all symbols. On the one platform where that behavior is not
natively available, namely windows, we emulate it by analyzing the input files
to the shared library and exporting all the symbols therein.
Not exporting all symbols is actually desirable, as it can improve loading
speed, reduces the likelihood of symbol conflicts and can improve intra
extension library function call performance. It also makes the non-windows
builds more similar to windows builds.
Additionally, with meson implementing the export-all-symbols behavior for
windows, turns out to be more verbose than desirable.
This patch adds support for hiding symbols by default and, to counteract that,
explicit symbol visibility annotation for compilers that support
__attribute__((visibility("default"))) and -fvisibility=hidden. That is
expected to be most, if not all, compilers except msvc (for which we already
support explicit symbol export annotations).
Now that extension library symbols are explicitly exported, we don't need to
export all symbols on windows anymore, hence remove that behavior from
src/tools/msvc. The supporting code can't be removed, as we still need to
export all symbols from the main postgres binary.
Author: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20211101020311.av6hphdl6xbjbuif@alap3.anarazel.de
When testing check-world it's hard to know what the test the test failure
output belongs to. The tap test output is especially problematic, partially
due to our practice of reusing test names like 001_basic.pl.
This isn't a real issue on the buildfarm, which invokes tests separately, but
locally and for CI it's quite annoying.
To fix, the test target provisos in Makefile.global.in now output
echo "+++ (regress|isolation|tap) [install-]check in $(subdir) +++"
before running the tests.
Discussion: https://postgr.es/m/20220330165039.3zseuiraxfjkksf5@alap3.anarazel.de
Move DLSUFFIX from makefiles into header files for all platforms.
Move the DLSUFFIX assignment from src/makefiles/ to src/templates/,
have configure read it, and then substitute it into Makefile.global
and pg_config.h. This avoids the need for all makefile rules that
need it to locally set CPPFLAGS. It also resolves an inconsistent
setup between the two Windows build systems.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/2f9861fb-8969-9005-7518-b8e60f2bead9@enterprisedb.com
Some environments may compile with --with-lz4 while the command "lz4"
goes missing, causing two failures in the TAP tests of pg_verifybackup
(008_untar.pl and 010_client_untar.pl) as the code assumed that the
command always existed with a hardcoded value in src/Makefile.global.
Rather than this method, this adds a ./configure check based on
PGAC_PATH_PROGS() to find automatically the command and get an absolute
path to it.
Both tests need to be adjusted for the case where the command does not
exist, actually, as Makefile.global would set now LZ4 to an empty value
in this case. The TAP tests of pg_receivewal already do that.
Per report from buildfarm member copperhead, as an effect of dab2984.
The origin of the failure is actually babbbb5 that did not centralize
the check for the existence of a "lz4" command at ./configure to shave a
few cycles. Note that one just needs to tweak an environment to move
"lz4" out of the way to reproduce the problem, which is what I did to
test this change.
Per discussion with Robert Haas, Tom Lane, Andres Freund and myself.
Discussion: https://postgr.es/m/Ygc51WVAFGocSu4h@paquier.xyz
pg_receivewal gains a new option, --compression-method=lz4, available
when the code is compiled with --with-lz4. Similarly to gzip, this
gives the possibility to compress archived WAL segments with LZ4. This
option is not compatible with --compress.
The implementation uses LZ4 frames, and is compatible with simple lz4
commands. Like gzip, using --synchronous ensures that any data will be
flushed to disk within the current .partial segment, so as it is
possible to retrieve as much WAL data as possible even from a
non-completed segment (this requires completing the partial file with
zeros up to the WAL segment size supported by the backend after
decompression, but this is the same as gzip).
The calculation of the streaming start LSN is able to transparently find
and check LZ4-compressed segments. Contrary to gzip where the
uncompressed size is directly stored in the object read, the LZ4 chunk
protocol does not store the uncompressed data by default. There is
contentSize that can be used with LZ4 frames by that would not help if
using an archive that includes segments compressed with the defaults of
a "lz4" command, where this is not stored. So, this commit has taken
the most extensible approach by decompressing the already-archived
segment to check its uncompressed size, through a blank output buffer in
chunks of 64kB (no actual performance difference noticed with 8kB, 16kB
or 32kB, and the operation in itself is actually fast).
Tests have been added to verify the creation and correctness of the
generated LZ4 files. The latter is achieved by the use of command
"lz4", if found in the environment.
The tar-based WAL method in walmethods.c, used now only by
pg_basebackup, does not know yet about LZ4. Its code could be extended
for this purpose.
Author: Georgios Kokolatos
Reviewed-by: Michael Paquier, Jian Guo, Magnus Hagander, Dilip Kumar
Discussion: https://postgr.es/m/ZCm1J5vfyQ2E6dYvXz8si39HQ2gwxSZ3IpYaVgYa3lUwY88SLapx9EEnOf5uEwrddhx2twG7zYKjVeuP5MwZXCNPybtsGouDsAD1o2L_I5E=@pm.me
For non-MSVC builds this is make's $(CURDIR), while for MSVC builds it
is $topdir/$Config/$module. The directory is added as the second element
in the PATH, so that the install location takes precedence, but the
added PATH element takes precedence over the rest of the PATH.
The reason for this is to allow tests to find built products that are
not installed, such as the libpq_pipeline test driver.
The libpq_pipeline test is adjusted to take advantage of this.
Based on a suggestion from Andres Freund.
Backpatch to release 14.
Discussion: https://postgr.es/m/4941f5a5-2d50-1a0e-6701-14c5fefe92d6@dunslane.net
The error message for trying to run the TAP tests in a tree not
configured with --enable-tap-tests is quite terse, and could be
made more helpful to new developers onboarding to postgres. This
adds a small hint on how to get the tests running in such cases.
Author: Kevin Burke <kevin@burke.dev>
Discussion: https://postgr.es/m/CAKcy5ejKVYwUXguQcd6i9KHDm7cM7FzjQ+aayaPveoa_woyQpQ@mail.gmail.com
The prove_installcheck recipe in src/Makefile.global.in was emitting
bogus paths for a couple of elements when used with PGXS. Here we create
a separate recipe for the PGXS case that does it correctly. We also take
the opportunity to make the make the file more readable by breaking up
the prove_installcheck and prove_check recipes across several lines, and
to remove the setting for REGRESS_SHLIB to src/test/recovery/Makefile,
which is the only set of tests that actually need it.
Backpatch to all live branches
Discussion: https://postgr.es/m/f2401388-936b-f4ef-a07c-a0bcc49b3300@dunslane.net
This is a replacement for the existing --with-openssl, extending the
logic to make easier the addition of new SSL libraries. The grammar is
chosen to be similar to --with-uuid, where multiple values can be
chosen, with "openssl" as the only supported value for now.
The original switch, --with-openssl, is kept for compatibility.
Author: Daniel Gustafsson, Michael Paquier
Reviewed-by: Jacob Champion
Discussion: https://postgr.es/m/FAB21FC8-0F62-434F-AA78-6BD9336D630A@yesql.se
With this commit, SHA1 goes through the implementation provided by
OpenSSL via EVP when building the backend with it, and uses as fallback
implementation KAME which was located in pgcrypto and already shaped for
an integration with a set of init, update and final routines.
Structures and routines have been renamed to make things consistent with
the fallback implementations of MD5 and SHA2.
uuid-ossp has used for ages a shortcut with pgcrypto to fetch a copy of
SHA1 if needed. This was built depending on the build options within
./configure, so this cleans up some code and removes the build
dependency between pgcrypto and uuid-ossp.
Note that this will help with the refactoring of HMAC, as pgcrypto
offers the option to use MD5, SHA1 or SHA2, so only the second option
was missing to make that possible.
Author: Michael Paquier
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/X9HXKTgrvJvYO7Oh@paquier.xyz
Replace CFLAGS_VECTOR with CFLAGS_UNROLL_LOOPS and CFLAGS_VECTORIZE,
allowing us to distinguish whether we want to apply -funroll-loops,
-ftree-vectorize, or both to a particular source file. Up to now
the only consumer of the symbol has been checksum.c which wants
both, so that there was no need to distinguish; but that's about
to change.
Amit Khandekar, reviewed and edited a little by me
Discussion: https://postgr.es/m/CAJ3gD9evtA_vBo+WMYMyT-u=keHX7-r8p2w7OSRfXf42LTwCZQ@mail.gmail.com
The previous system had configure put the value into the makefiles and
then have the makefiles pass them to the build of pg_config. That was
put in place when pg_config was a shell script. We can simplify that
by having configure put the value into pg_config.h directly. This
also makes the standard build system match how the MSVC build system
already does it.
Discussion: https://www.postgresql.org/message-id/flat/6e457870-cef5-5f1d-b57c-fc89cfb8a788%402ndquadrant.com
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
Up to now, psql's tab-complete.c has had exactly no regression test
coverage. This patch is an experimental attempt to add some.
This needs Perl's IO::Pty module, which isn't installed everywhere,
so the test script just skips all tests if that's not present.
There may be other portability gotchas too, so I await buildfarm
results with interest.
So far this just covers a few very basic keyword-completion and
query-driven-completion scenarios, which should be enough to let us
get a feel for whether this is practical at all from a portability
standpoint. If it is, there's lots more that can be done.
Discussion: https://postgr.es/m/10967.1577562752@sss.pgh.pa.us
Peter Eisentraut