When given an existing but unreadable file as a configuration file,
gitweb behaved as if the file did not exist at all, but now it
errors out. This is a change that may break backward compatibility.
* mj/gitweb-unreadable-config-error:
gitweb: die when a configuration file cannot be read
Fix a possibility of a permission to access error go unnoticed.
Perl uses two different variables to manage errors from a "do
$filename" construct. One is $@, which is set in this case when do
is unable to compile the file. The other is $!, which is set in case
do cannot read the file. The current code only checks "$@", which
means a configuration file passed to GitWeb that is not readable by
the server process does not cause it to "die".
Make sure we also check and act on "$!" to fix this.
Signed-off-by: Marcelo Roberto Jimenez <marcelo.jimenez@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stale URLs have been updated to their current counterparts (or
archive.org) and HTTP links are replaced with working HTTPS links.
* js/update-urls-in-doc-and-comment:
doc: refer to internet archive
doc: update links for andre-simon.de
doc: switch links to https
doc: update links to current pages
These pages are no longer reachable from their original locations,
which makes things difficult for readers. Instead, switch to linking to
the Internet Archive for the content.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Beyond the fact that it's somewhat traditional to respect sites'
self-identification, it's helpful for links to point to the things
that people expect them to reference. Here that means linking to
specific pages instead of a domain.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's somewhat traditional to respect sites' self-identification.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following commit will make use of a Getopt::Long feature which is
only present in Perl >= 5.8.1. Document that as the minimum version we
support.
Many of our Perl scripts will continue to run with 5.8.0 but this change
allows us to adjust them as needed without breaking any promises to our
users.
The Perl requirement was last changed in d48b284183 (perl: bump the
required Perl version to 5.8 from 5.6.[21], 2010-09-24). At that time,
5.8.0 was 8 years old. It is now over 21 years old.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb had legacy URL shortener that is specific to the way
projects hosted on kernel.org used to (but no longer) work, which
has been removed.
* jr/gitweb-title-shortening:
gitweb: remove title shortening heuristics
Those heuristics are way outdated and too specific to the kernel project
to be useful outside of kernel.org. Since kernel.org doesn't use gitweb
anymore and at least one project complained about incorrect behavior,
entirely remove them.
Signed-off-by: Julien Rouhaud <julien.rouhaud@free.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "make all" to build gitweb as well.
* ab/build-gitweb:
gitweb/Makefile: add a "NO_GITWEB" parameter
Makefile: build 'gitweb' in the default target
gitweb/Makefile: include in top-level Makefile
gitweb: remove "test" and "test-installed" targets
gitweb/Makefile: prepare to merge into top-level Makefile
gitweb/Makefile: clear up and de-duplicate the gitweb.{css,js} vars
gitweb/Makefile: add a $(GITWEB_ALL) variable
gitweb/Makefile: define all .PHONY prerequisites inline
From looking at the {Free,Net,Dragonfly}BSD packages for git[1]
they've been monkeypatching "gitweb" out of the Makefile, let's be
nicer and provide a NO_GITWEB=Y for their use.
For the "all" target this allows for optionally restoring what's been
the status quo before the preceding commit, but now we'll also behave
correctly on the subsequent "make install".
As before our installation of gitweb can be suppressed with
NO_PERL. For backwards compatibility the NO_PERL=Y flag by itself
still doesn't change whether or not we build gitweb, unlike the new
NO_GITWEB=Y flag.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include the gitweb/Makefile in the top-level Makefile rather than
calling it as a sub-Makefile. As noted in the thread starting at at
[1] (in particular [2]) we'll pay a high cost on NOOP runs of "make"
just to figure out that we have nothing to do for "make gitweb".
The "gitweb" script also isn't maintained out-of-tree, unlike
"gitk-git" or "git-gui", which both have their own "Makefile". Other
parts of it are already integrated into our main Makefiles, e.g. the
documentation is built by Documentation/Makefile since
07ea4df278 (gitweb: Add gitweb(1) manpage for gitweb itself,
2011-10-16).
1. https://lore.kernel.org/git/20220525205651.825669-1-szeder.dev@gmail.com/
2. https://lore.kernel.org/git/220526.86k0a96sv2.gmgdl@evledraar.gmail.com/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the special "test" targets for gitweb added in
958a846721 (gitweb/Makefile: Add 'test' and 'test-installed' targets,
2010-09-26). Unlike e.g. "contrib/scalar" and "contrib/subtree" the
"gitweb" tests themselves live in our top-level t/ directory.
It therefore doesn't make sense to maintain this indirection, no more
than it would to have a "git-send-email-test". By dropping it we'll
also free other tests to use the t95*.sh prefix.
These removed targets are unlikely to be used by anyone, and to the
extent that they are we can easily use an invocation like this
instead:
make test T='t[0-9]*gitweb*.sh'
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the "gitweb/Makefile" was split out from the top-level Makefile
in 62331ef163 (gitweb: Makefile improvements, 2010-01-30) we've kept
the inter-dependencies between the two, and worse have dealt with a
lot of duplication as a result.
In preparation for merging the two again add a MAK_DIR_GITWEB variable
to various rules in it. This will allow us to set this variable to
"gitweb/" as we include it in the top-level Makefile, which will
minimize the size of the subsequent diff.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the variable definitions for the $(GITWEB_CSS) and $(GITWEB_JS)
so that we have a clear separation between what we use as "in" files,
v.s. our "min" files. We can now make the appending to $(GITWEB_FILES)
unconditional, since $(GITWEB_{JS,CSS}) is either the "min" or
non-"min" version. This reduces the duplication within the file.
While we're at it let's initialize "GITWEB_JSLIB_FILES" as we normally
do with such variables.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Declare the targets that the "all" target depends on with a new
$(GITWEB_ALL) variable. This will help to reduce churn in subsequent
commits.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the '.PHONY' definition so that it's split up and accompanies the
relevant as they're defined. This will make a subsequent diff smaller
as we'll remove some of these, and won't need to re-edit the
now-removed '.PHONY' line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the HTML Standard FAQ:
“What is the DOCTYPE for modern HTML documents?
In text/html documents:
<!DOCTYPE html>
In documents delivered with an XML media type: no DOCTYPE is required
and its use is generally unnecessary. However, you may use one if you
want (see the following question). Note that the above is well-formed
XML.”
Source: [1]
Gitweb uses an XHTML 1.0 DOCTYPE:
<!DOCTYPE html PUBLIC
"-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
While that DOCTYPE is still valid [2], it has several disadvantages:
1. It’s misleading. If an XML parser uses the DTD at the given link,
then the entities and ⋅ won’t get declared. Instead, the
parser has to use a DTD from the HTML Standard that has nothing to do
with XHTML 1.0 [2].
2. It’s obsolete. XHTML 1.0 was last revised in 2002 and was superseded in
2018 [3].
3. It’s unreliable. Gitweb uses and ⋅ but lets an external file
define them. “[…U]using entity references for characters in XML documents
is unsafe if they are defined in an external file (except for <, >,
&, ", and ').” [4]
[1]: <https://github.com/whatwg/html/blob/main/FAQ.md#what-is-the-doctype-for-modern-html-documents>
[2]: <https://html.spec.whatwg.org/multipage/xhtml.html#parsing-xhtml-documents>
[3]: <https://www.w3.org/TR/xhtml1/#xhtml>
[4]: <https://html.spec.whatwg.org/multipage/xhtml.html#writing-xhtml-documents>
Signed-off-by: Jason Yundt <jason@jasonyundt.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this change, gitweb would generate pages which included:
<meta http-equiv="content-type" content="application/xhtml+xml; charset=utf-8"/>
When a meta's http-equiv equals "content-type", the http-equiv is said
to be in the "Encoding declaration state". According to the HTML
Standard,
The Encoding declaration state may be used in HTML documents,
but elements with an http-equiv attribute in that state must not
be used in XML documents.
Source: <https://html.spec.whatwg.org/multipage/semantics.html#attr-meta-http-equiv-content-type>
This change removes that meta element since gitweb always generates XML
documents.
Signed-off-by: Jason Yundt <jason@jasonyundt.email>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tie-break branches that point at the same object in the list of
branches on GitWeb to show the one pointed at by HEAD early.
* gh/gitweb-branch-sort:
gitweb: use HEAD as secondary sort key in git_get_heads_list()
The "heads" section on the gitweb summary page shows heads in
`-committerdate` order (ie. the most recently-modified ones at the
top), tie-breaking equal-dated refs using the implicit `refname` sort
fallback. This recency-based ordering appears in multiple places in the
UI, such as the project listing, the tags list, and even the
shortlog and log views.
Given two equal-dated refs, however, sorting the `HEAD` ref before
the non-`HEAD` ref provides more useful signal than merely sorting by
refname. For example, say we had "master" and "trunk" both pointing at
the same commit but "trunk" was `HEAD`, sorting "trunk" first helps
communicate its special status as the default branch that you'll check
out if you clone the repo.
Add `-HEAD` as a secondary sort key to the `git for-each-ref` call
in `git_get_heads_list()` to provide the desired behavior. The most
recently committed refs will appear first, but `HEAD`-ness will be used
as a tie-breaker. Note that `refname` is the implicit fallback sort key,
which means that two same-dated non-`HEAD` refs will continue to be
sorted in lexicographical order, as they are today.
Signed-off-by: Greg Hurrell <greg@hurrell.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb extracts content from the Git log and makes it accessible
over HTTP. As a result, e-mail addresses found in commits are
exposed to web crawlers and they may not respect robots.txt.
This can result in unsolicited messages.
Introduce an 'email-privacy' feature which redacts e-mail addresses
from the generated HTML content. Specifically, obscure addresses
retrieved from the the author/committer and comment sections of the
Git log. The feature is off by default.
This feature does not prevent someone from downloading the
unredacted commit log, e.g., by cloning the repository, and
extracting information from it. It aims to hinder the low-
effort, bulk collection of e-mail addresses by web crawlers.
Signed-off-by: Georgios Kontaxis <geko1702+commits@99rst.org>
Acked-by: Eric Wong <e@80x24.org>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'clean' target is still noticeably slow on cygwin, despite the
improvements made by previous patches. For example, the second
invocation of 'make clean' below:
$ make clean >/dev/null 2>&1
$ make clean
...
make[1]: Entering directory '/home/ramsay/git/gitweb'
make[2]: Entering directory '/home/ramsay/git'
make[2]: 'GIT-VERSION-FILE' is up to date.
make[2]: Leaving directory '/home/ramsay/git'
...
$
has been timed at 10.361s on my laptop (an old core i5-4200M @ 2.50GHz,
8GB RAM, 1TB HDD).
Notice that the 'clean' target is making a nested call to the parent
Makefile to ensure that the GIT-VERSION-FILE is up-to-date. This is to
ensure that the $(GIT_VERSION) make variable is set, once that file had
been included. However, the 'clean' target does not use the $(GIT_VERSION)
variable, directly or indirectly, so it does not have any affect on what
the target removes. Therefore, the time spent on ensuring an up to date
GIT-VERSION-FILE is wasted effort.
In order to eliminate such wasted effort, use the value of the internal
$(MAKECMDGOALS) variable to only '-include ../GIT-VERSION-FILE' when the
target is not 'clean'. (This drops the time down to 8.430s, on my laptop,
giving an improvement of 18.64%).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit trailers like "Thanks-to:", "Fixes:", and "Closes:" are fairly
common, but gitweb didn't highlight them like other trailers.
Signed-off-by: Emma Brooks <me@pluvano.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
FCGI streams are implemented using the older stream API: TIEHANDLE,
therefore applying PerlIO layers using binmode() has no effect to them.
The solution in this patch is to redefine the FCGI::Stream::PRINT function
to use UTF-8 as output encoding, except within git_blob_plain() and git_snapshot()
which must still output in raw binary mode.
This problem and solution were previously reported back in 2012:
- http://git.661346.n2.nabble.com/Gitweb-running-as-FCGI-does-not-print-its-output-in-UTF-8-td7573415.html
- http://stackoverflow.com/questions/5005104
Signed-off-by: Julien Moutinho <julm+git@sourcephile.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some codepaths in "gitweb" that forgot to escape URLs generated
based on end-user input have been corrected.
* jk/gitweb-anti-xss:
gitweb: escape URLs generated by href()
t/gitweb-lib.sh: set $REQUEST_URI
t/gitweb-lib.sh: drop confusing quotes
t9502: pass along all arguments in xss helper
Docfix.
* en/doc-typofix:
Fix spelling errors in no-longer-updated-from-upstream modules
multimail: fix a few simple spelling errors
sha1dc: fix trivial comment spelling error
Fix spelling errors in test commands
Fix spelling errors in messages shown to users
Fix spelling errors in names of tests
Fix spelling errors in comments of testcases
Fix spelling errors in code comments
Fix spelling errors in documentation outside of Documentation/
Documentation: fix a bunch of typos, both old and new
There's a cross-site scripting problem in gitweb, where it will print
URLs generated by its href() helper without further quoting. This allows
an attacker to point a victim to a specially crafted gitweb URL and
inject arbitrary HTML into the resulting page (which the victim sees as
coming from gitweb).
The base of the URL comes from evaluate_uri(), which pulls the value of
$REQUEST_URI via the CGI module. It tries to strip off $PATH_INFO, but
fails to do so in some cases (including ones that contain special
characters, like "+"). Most of the uses of the URL end up being passed
to "$cgi->a(-href = href())", which will get quoted properly by the CGI
module. But in a few places, we output them ourselves as part of
manually-generated HTML, and whatever was in the original URL will
appear unquoted in the output.
Given that all of the nearby variables placed into this manual HTML
_are_ quoted, it seems like the authors assumed that these URLs would
not need quoting. So it's possible that the bug is actually in
evaluate_uri(), which should be doing a more careful job of stripping
$PATH_INFO. There's some discussion in a comment in that function, as
well as the commit message in 81d3fe9f48 (gitweb: fix wrong base URL
when non-root DirectoryIndex, 2009-02-15). But I'm not sure I understand
it.
Regardless, it's a good idea to quote these values at the point of
insertion into the HTML output:
1. Even if there is a bug in evaluate_uri(), this would give us
belt-and-suspenders protection.
2. evaluate_uri() is only handling the base. Some generated URLs will
also mention arbitrary refs or filenames in the repositories, and
these should be quoted anyway.
3. It should never _hurt_ to quote (and that's what all of the
$cgi->a() calls are doing already).
So there may be further work here, but this patch at least prevents the
XSS vulnerability, and shouldn't make anything worse.
The test here covers the calls in print_feed_meta(), but I manually
audited every call to href() to see how its output was used, and quoted
appropriately. Most of them are esc_attr(), as they're used in tag
attributes, but I used esc_html() when the URLs were printed bare. The
distinction is largely academic, as one is implemented as a wrapper for
the other.
Reported-by: NAKAYAMA DAISUKE <nakyamad@icloud.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, the setting
$feature{'javascript-actions'}{'default'} = [1];
in gitweb.conf breaks gitweb's blame page: clicking on line numbers
displayed in the second column on the page has no effect.
For comparison, with javascript-actions disabled, clicking on line
numbers loads the previous version of the line.
Addresses https://bugs.debian.org/741883.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Robert Luberda <robert@debian.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gitweb has several hard-coded 40 values throughout it to check for
values that are passed in or acquired from Git. To simplify the code,
introduce a regex variable that matches either exactly 40 or exactly 64
hex characters, and use this variable anywhere we would have previously
hard-coded a 40 in a regex.
Add some helper functions which allow us to write tighter regexes that
match exactly the number of hex characters we're expecting.
Similarly, switch the code that looks for deleted diffinfo information
to look for either 40 or 64 zeros, and update one piece of code to use
this function. Finally, when formatting a log line, allow an
abbreviated describe output to contain up to 64 characters.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since my d48b284183 ("perl: bump the required Perl version to 5.8 from
5.6.[21]", 2010-09-24), we've depended on 5.8, so there's no reason to
conditionally require Digest::MD5 anymore. It was released with perl
v5.7.3[1]
The initial introduction of the dependency in
e9fdd74e53 ("gitweb: (gr)avatar support", 2009-06-30) says as much,
this also undoes part of the later 2e9c8789b7 ("gitweb: Mention
optional Perl modules in INSTALL", 2011-02-04) since gitweb will
always be run on at least 5.8, so there's no need to mention
Digest::MD5 as a required module in the documentation, let's instead
say that we require perl 5.8.
1. $ corelist Digest::MD5
Data for 2015-02-14
Digest::MD5 was first released with perl v5.7.3
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"gitweb" checks if a directory is searchable with Perl's "-x"
operator, which can be enhanced by using "filetest 'access'"
pragma, which now we do.
* gc/gitweb-filetest-acl:
gitweb: use filetest to allow ACLs
In commit 46a1385 (gitweb: skip unreadable subdirectories, 2017-07-18)
we forgot to handle non-unix ACLs as well. Fix this.
Signed-off-by: Guillaume Castagnino <casta@xwing.info>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"gitweb" shows a link to visit the 'raw' contents of blbos in the
history overview page.
* js/gitweb-raw-blob-link-in-history:
gitweb: add 'raw' blob_plain link in history overview
When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
It might end up hiding a problem under the rug and a better
solution might be to loudly complain to the administrator pointing
out the problematic directory, but this will at least make it
"work".
* hb/gitweb-project-list:
gitweb: skip unreadable subdirectories
For people that work with very large plain text files it may be easier
if one can bypass viewing the htmlized blob and instead click directly
to the raw file (rather then click through 'blob' and then to 'raw').
Signed-off-by: Job Snijders <job@instituut.net>
Reviewed-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a directory is not readable, "gitweb" fails to build the
project list. Work this around by skipping such a directory.
* hb/gitweb-project-list:
gitweb: skip unreadable subdirectories
gitweb terminates and shows no project list, if it can not access a
sub-directory in the project root directory while looking for projects
to show.
Work it around by skipping unreadable directories.
Signed-off-by: Hielke Christian Braun <hcb@unco.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sven Strickroth <email@cs-ware.de>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to purely abbreviated commit object names, "gitweb"
learned to turn "git describe" output (e.g. v2.9.3-599-g2376d31787)
into clickable links in its output.
* ab/gitweb-abbrev-links:
gitweb: link to "git describe"'d commits in log messages
gitweb: link to 7-char+ SHA-1s, not only 8-char+
gitweb: fix a typo in a comment
Change the log formatting function to know about "git describe" output
such as "v2.8.0-4-g867ad08", in addition to just plain "867ad08".
There are still many valid refnames that we don't link to
e.g. v2.10.0-rc1~2^2~1 is also a valid way to refer to
v2.8.0-4-g867ad08, but I'm not supporting that with this commit,
similarly it's trivially possible to create some refnames like
"æ/var-gf6727b0" or which won't be picked up by this regex.
There's surely room for improvement here, but I just wanted to address
the very common case of sticking "git describe" output into commit
messages without trying to link to all possible refnames, that's going
to be a rather futile exercise given that this is free text, and it
would be prohibitively expensive to look up whether the references in
question exist in our repository.
There was on-list discussion about how we could do better than this
patch. Junio suggested to update parse_commits() to call a new
"gitweb--helper" command which would pass each of the revision
candidates through "rev-parse --verify --quiet". That would cut down
on our false positives (e.g. we'll link to "deadbeef"), and also allow
us to be more aggressive in selecting candidate revisions.
That may be too expensive to work in practice, or it may
not. Investigating that would be a good follow-up to this patch.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the minimum length of an abbreviated object identifier in the
commit message gitweb tries to turn into link from 8 hexchars to 7.
This arbitrary minimum length of 8 was introduced in bfe2191 ("gitweb:
SHA-1 in commit log message links to "object" view", 2006-12-10), but
the default abbreviation length is 7, and has been for a long time.
It's still possible to reference SHA-1s down to 4 characters in length,
see v1.7.4-1-gdce9648's MINIMUM_ABBREV, but I can't see how to make
git actually produce that, so I doubt anyone is putting that into log
messages in practice, but people definitely do put 7 character SHA-1s
into log messages.
I think it's fairly dubious to link to things matching [0-9a-fA-F]
here as opposed to just [0-9a-f], that dates back to the initial
version of gitweb from 161332a ("first working version",
2005-08-07). Git will accept all-caps SHA-1s, but didn't ever produce
them as far as I can tell.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change a typo'd MIME type in a comment. The Content-Type is
application/xhtml+xml, not application/xhtm+xml.
Fixes up code originally added in 53c4031 ("gitweb: Strip
non-printable characters from syntax highlighter output", 2011-09-16).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "highlight" binary can, in some cases, determine the language type
by the means of file contents, for example the shebang in the first line
for some scripting languages. Make use of this autodetection for files
which syntax is not known by gitweb. In that case, pass the blob
contents to "highlight --force"; the parameter is needed to make it
always generate HTML output (which includes HTML-escaping).
Although we now run highlight on files which do not end up highlighted,
performance is virtually unaffected because when we call highlight, it
is used for escaping HTML. In the case that highlight is used, gitweb
calls sanitize() instead of esc_html(), and the latter is significantly
slower (it does more, being roughly a superset of sanitize()). Simple
benchmark comparing performance of 'blob' view of files without syntax
highlighting in gitweb before and after this change indicates ±1%
difference in request time for all file types. Benchmark was performed
on local instance on Debian, using Apache/2.4.23 web server and CGI.
Document the feature and improve syntax highlight documentation, add
test to ensure gitweb doesn't crash when language detection is used.
Signed-off-by: Ian Kelling <ian@iankelling.org>
Acked-by: Jakub Narębski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano