This creates a new fsmonitor-ll.h with most of the functions from
fsmonitor.h, though it leaves three inline functions where they were.
Two-thirds of the files that previously included fsmonitor.h did not
need those three inline functions or the six extra includes those inline
functions required, so this allows them to only include the lower level
header.
Diff best viewed with `--color-moved`.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this header showed up in some places besides just #include
statements, update/clean-up/remove those other places as well.
Note that compat/fsmonitor/fsm-path-utils-darwin.c previously got
away with violating the rule that all files must start with an include
of git-compat-util.h (or a short-list of alternate headers that happen
to include it first). This change exposed the violation and caused it
to stop building correctly; fix it by having it include
git-compat-util.h first, as per policy.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For the functions defined in read-cache.c, move their declarations from
cache.h to a new header, read-cache-ll.h. Also move some related inline
functions from cache.h to read-cache.h. The purpose of the
read-cache-ll.h/read-cache.h split is that about 70% of the sites don't
need the inline functions and the extra headers they include.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Header clean-up.
* en/header-split-cache-h: (24 commits)
protocol.h: move definition of DEFAULT_GIT_PORT from cache.h
mailmap, quote: move declarations of global vars to correct unit
treewide: reduce includes of cache.h in other headers
treewide: remove double forward declaration of read_in_full
cache.h: remove unnecessary includes
treewide: remove cache.h inclusion due to pager.h changes
pager.h: move declarations for pager.c functions from cache.h
treewide: remove cache.h inclusion due to editor.h changes
editor: move editor-related functions and declarations into common file
treewide: remove cache.h inclusion due to object.h changes
object.h: move some inline functions and defines from cache.h
treewide: remove cache.h inclusion due to object-file.h changes
object-file.h: move declarations for object-file.c functions from cache.h
treewide: remove cache.h inclusion due to git-zlib changes
git-zlib: move declarations for git-zlib functions from cache.h
treewide: remove cache.h inclusion due to object-name.h changes
object-name.h: move declarations for object-name.c functions from cache.h
treewide: remove unnecessary cache.h inclusion
treewide: be explicit about dependence on mem-pool.h
treewide: be explicit about dependence on oid-array.h
...
Dozens of files made use of trace and trace2 functions, without
explicitly including trace.h or trace2.h. This made it more difficult
to find which files could remove a dependence on cache.h. Make C files
explicitly include trace.h or trace2.h if they are using them.
Signed-off-by: Elijah Newren <newren@gmail.com>
Acked-by: Calvin Wan <calvinwan@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As of e636a7b4d0 (read-cache: be specific what part of the index has
changed, 2014-06-13), the paradigm `cache_changed = 1` fell out of
fashion and it became a bit field instead.
This is important because some bits have specific meaning and should not
be unset without care, e.g. `SPLIT_INDEX_ORDERED`.
However, b5a8169752 (mark_fsmonitor_valid(): mark the index as changed
if needed, 2019-05-24) did use the `cache_changed` attribute as if it
were a Boolean instead of a bit field.
That not only would override the `SPLIT_INDEX_ORDERED` bit when marking
index entries as valid via the FSMonitor, but worse: it would set the
`SOMETHING_OTHER` bit (whose value is 1). This means that Git would
unnecessarily force a full index to be written out when a split index
was asked for.
Let's instead use the bit that is specifically intended to indicate
FSMonitor-triggered changes, allowing the split-index feature to work as
designed.
Noticed-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Never set CE_FSMONITOR_VALID on the cache-entry of submodule
directories.
During a client command like 'git status', we may need to recurse
into each submodule to compute a status summary for the submodule.
Since the purpose of the ce_flag is to let Git avoid scanning a
cache-entry, setting the flag causes the recursive call to be
avoided and we report incorrect (no status) for the submodule.
We created an OS watch on the root directory of our working
directory and we receive events for everything in the cone
under it. When submodules are present inside our working
directory, we receive events for both our repo (the super) and
any subs within it. Since our index doesn't have any information
for items within the submodules, we can't use those events.
We could try to truncate the paths of those events back to the
submodule boundary and mark the GITLINK as dirty, but that
feels expensive since we would have to prefix compare every FS
event that we receive against a list of submodule roots. And
it still wouldn't be sufficient to correctly report status on
the submodule, since we don't have any space in the cache-entry
to cache the submodule's status (the 'SCMU' bits in porcelain
V2 speak). That is, the CE_FSMONITOR_VALID bit just says that
we don't need to scan/inspect it because we already know the
answer -- it doesn't say that the item is clean -- and we
don't have space in the cache-entry to store those answers.
So we should always do the recursive scan.
Therefore, we should never set the flag on GITLINK cache-entries.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move fsmonitor config settings to a new and opaque
`struct fsmonitor_settings` structure. Add a lazily-loaded pointer
to this into `struct repo_settings`
Create an `enum fsmonitor_mode` type in `struct fsmonitor_settings` to
represent the state of fsmonitor. This lets us represent which, if
any, fsmonitor provider (hook or IPC) is enabled.
Create `fsm_settings__get_*()` getters to lazily look up fsmonitor-
related config settings.
Get rid of the `core_fsmonitor` global variable. Move the code to
lookup the existing `core.fsmonitor` config value into the fsmonitor
settings.
Create a hook pathname variable in `struct fsmonitor-settings` and
only set it when in hook mode.
Extend the definition of `core.fsmonitor` to be either a boolean
or a hook pathname. When true, the builtin FSMonitor is used.
When false or unset, no FSMonitor (neither builtin nor hook) is
used.
The existing `core_fsmonitor` global variable was used to store the
pathname to the fsmonitor hook *and* it was used as a boolean to see
if fsmonitor was enabled. This dual usage and global visibility leads
to confusion when we add the IPC-based provider. So lets hide the
details in fsmonitor-settings.c and let it decide which provider to
use in the case of multiple settings. This avoids cluttering up
repo-settings.c with these private details.
A future commit in builtin-fsmonitor series will add the ability to
disqualify worktrees for various reasons, such as being mounted from a
remote volume, where fsmonitor should not be started. Having the
config settings hidden in fsmonitor-settings.c allows such worktree
restrictions to override the config values used.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Validate that fsmonitor is valid to futureproof against bugs where
check_removed might be called from places that haven't refreshed.
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's measure the time taken to request and receive FSMonitor data
via the hook API and the size of the response.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Reviewed-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this bug fix, t7519's four "status doesn't detect unreported
modifications" test cases would fail occasionally (and, oddly enough,
*a lot* more frequently on Windows).
The reason is that these test cases intentionally use the side effect of
`git status` to re-write the index if any updates were detected: they
first clean the worktree, run `git status` to update the index as well
as show the output to the casual reader, then make the worktree dirty
again and expect no changes to reported if running with a mocked
fsmonitor hook.
The problem with this strategy was that the index was written during
said `git status` on the clean worktree for the *wrong* reason: not
because the index was marked as changed (it wasn't), but because the
recorded mtimes were racy with the index' own mtime.
As the mtime granularity on Windows is 100 nanoseconds (see e.g.
https://docs.microsoft.com/en-us/windows/desktop/SysInfo/file-times),
the mtimes of the files are often enough *not* racy with the index', so
that that `git status` call currently does not always update the index
(including the fsmonitor extension), causing the test case to fail.
The obvious fix: if we change *any* index entry's `CE_FSMONITOR_VALID`
flag, we should also mark the index as changed. That will cause the
index to be written upon `git status`, *including* an updated fsmonitor
extension.
Side note: Even though the reader might think that the t7519 issue
should be *much* more prevalent on Linux, given that the ext4 filesystem
(that seems to be used by every Linux distribution) stores mtimes in
nanosecond precision. However, ext4 uses `current_kernel_time()` (see
https://unix.stackexchange.com/questions/11599#comment762968_11599; it
is *amazingly* hard to find any proper source of information about such
ext4 questions) whose accuracy seems to depend on many factors but is
safely worse than the 100-nanosecond granularity of NTFS (again, it is
*horribly* hard to find anything remotely authoritative about this
question). So it seems that the racy index condition that hid the bug
fixed by this patch simply is a lot more likely on Linux than on
Windows. But not impossible ;-)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has been a push to remove extern from function declarations.
Remove some instances of "extern" for function declarations which are
caught by Coccinelle. Note that Coccinelle has some difficulty with
processing functions with `__attribute__` or varargs so some `extern`
declarations are left behind to be dealt with in a future patch.
This was the Coccinelle patch used:
@@
type T;
identifier f;
@@
- extern
T f(...);
and it was run with:
$ git ls-files \*.{c,h} |
grep -v ^compat/ |
xargs spatch --sp-file contrib/coccinelle/noextern.cocci --in-place
Files under `compat/` are intentionally excluded as some are directly
copied from external sources and we should avoid churning them as much
as possible.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I looped over the toplevel header files, creating a temporary two-line C
program for each consisting of
#include "git-compat-util.h"
#include $HEADER
This patch is the result of manually fixing errors in compiling those
tiny programs.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
read_directory() code ignores all paths named ".git" even if it's not
a valid git repository. See treat_path() for details. Since ".git" is
basically invisible to read_directory(), when we are asked to
invalidate a path that contains ".git", we can safely ignore it
because the slow path would not consider it anyway.
This helps when fsmonitor is used and we have a real ".git" repo at
worktree top. Occasionally .git/index will be updated and if the
fsmonitor hook does not filter it, untracked cache is asked to
invalidate the path ".git/index".
Without this patch, we invalidate the root directory unncessarily,
which:
- makes read_directory() fall back to slow path for root directory
(slower)
- makes the index dirty (because UNTR extension is updated). Depending
on the index size, writing it down could also be slow.
A note about the new "safe_path" knob. Since this new check could be
relatively expensive, avoid it when we know it's not needed. If the
path comes from the index, it can't contain ".git". If it does
contain, we may be screwed up at many more levels, not just this one.
Noticed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ba1b9cac ("fsmonitor: delay updating state until after split index
is merged", 2017-10-27) resolved the problem of the fsmonitor data
being applied to the non-base index when reading; however, a similar
problem exists when writing the index. Specifically, writing of the
fsmonitor extension happens only after the work to split the index
has been applied -- as such, the information in the index is only
for the non-"base" index, and thus the extension information
contains only partial data.
When saving, compute the ewah bitmap before the index is split, and
store it in the fsmonitor_dirty field, mirroring the behavior that
occurred during reading. fsmonitor_dirty is kept from being leaked by
being freed when the extension data is written -- which always happens
precisely once, no matter the split index configuration.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the index is read from disk, the fsmonitor index extension is used
to flag the last known potentially dirty index entries. The registered
core.fsmonitor command is called with the time the index was last
updated and returns the list of files changed since that time. This list
is used to flag any additional dirty cache entries and untracked cache
directories.
We can then use this valid state to speed up preload_index(),
ie_match_stat(), and refresh_cache_ent() as they do not need to lstat()
files to detect potential changes for those entries marked
CE_FSMONITOR_VALID.
In addition, if the untracked cache is turned on valid_cached_dir() can
skip checking directories for new or changed files as fsmonitor will
invalidate the cache only for those directories that have been
identified as having potential changes.
To keep the CE_FSMONITOR_VALID state accurate during git operations;
when git updates a cache entry to match the current state on disk,
it will now set the CE_FSMONITOR_VALID bit.
Inversely, anytime git changes a cache entry, the CE_FSMONITOR_VALID bit
is cleared and the corresponding untracked cache directory is marked
invalid.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren