Leakfix.
* rj/add-i-leak-fix:
add: plug a leak on interactive_add
add-patch: plug a leak handling the '/' command
add-interactive: plug a leak in get_untracked_files
apply: plug a leak in apply_data
The "receive-pack" program (which responds to "git push") was not
converted to run "git maintenance --auto" when other codepaths that
used to run "git gc --auto" were updated, which has been corrected.
* ps/run-auto-maintenance-in-receive-pack:
builtin/receive-pack: convert to use git-maintenance(1)
run-command: introduce function to prepare auto-maintenance process
The way "git fast-import" handles paths described in its input has
been tightened up and more clearly documented.
* ta/fast-import-parse-path-fix:
fast-import: make comments more precise
fast-import: forbid escaped NUL in paths
fast-import: document C-style escapes for paths
fast-import: improve documentation for path quoting
fast-import: remove dead strbuf
fast-import: allow unquoted empty path for root
fast-import: directly use strbufs for paths
fast-import: tighten path unquoting
Plug a leak we have since 5a76aff1a6 (add: convert to use
parse_pathspec, 2013-07-14).
This leak can be triggered with:
$ git add -p anything
Fixing this leak allows us to mark as leak-free the following tests:
+ t3701-add-interactive.sh
+ t7514-commit-patch.sh
Mark them with "TEST_PASSES_SANITIZE_LEAK=true" to notice and fix
promply any new leak that may be introduced and triggered by them in the
future.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 850b6edefa (auto-gc: extract a reusable helper from "git fetch",
2020-05-06), we have introduced a helper function `run_auto_gc()` that
kicks off `git gc --auto`. The intent of this function was to pass down
the "--quiet" flag to git-gc(1) as required without duplicating this at
all callsites. In 7c3e9e8cfb (auto-gc: pass --quiet down from am,
commit, merge and rebase, 2020-05-06) we then converted callsites that
need to pass down this flag to use the new helper function. This has the
notable omission of git-receive-pack(1), which is the only remaining
user of `git gc --auto` that sets up the proccess manually. This is
probably because it unconditionally passes down the `--quiet` flag and
thus didn't benefit much from the new helper function.
In a95ce12430 (maintenance: replace run_auto_gc(), 2020-09-17) we then
replaced `run_auto_gc()` with `run_auto_maintenance()` which invokes
git-maintenance(1) instead of git-gc(1). This command is the modern
replacement for git-gc(1) and is both more thorough and also more
flexible because administrators can configure which tasks exactly to run
during maintenance.
But due to git-receive-pack(1) not using `run_auto_gc()` in the first
place it did not get converted to use git-maintenance(1) like we do
everywhere else now. Address this oversight and start to use the newly
introduced function `prepare_auto_maintenance()`. This will also make it
easier for us to adapt this code together with all the other callsites
that invoke auto-maintenance in the future.
This removes the last internal user of `git gc --auto`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The codepaths that reach date_mode_from_type() have been updated to
pass "struct date_mode" by value to make them thread safe.
* rs/date-mode-pass-by-value:
date: make DATE_MODE thread-safe
"git add -u <pathspec>" and "git commit [-i] <pathspec>" did not
diagnose a pathspec element that did not match any files in certain
situations, unlike "git add <pathspec>" did.
* gt/add-u-commit-i-pathspec-check:
builtin/add: error out when passing untracked path with -u
builtin/commit: error out when passing untracked path with -i
revision: optionally record matches with pathspec elements
A config parser callback function fell through instead of returning
after recognising and processing a variable, wasting cycles, which
has been corrected.
* ds/fetch-config-parse-microfix:
fetch: return when parsing submodule.recurse
Windows binary used to decide the use of unix-domain socket at
build time, but it learned to make the decision at runtime instead.
* ma/win32-unix-domain-socket:
Win32: detect unix socket support at runtime
The former is somewhat imprecise. The latter became out of sync with the
behavior in e814c39c2f (fast-import: refactor parsing of spaces,
2014-06-18).
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NUL cannot appear in paths. Even disregarding filesystem path
limitations, the tree object format delimits with NUL, so such a path
cannot be encoded by Git.
When a quoted path is unquoted, it could possibly contain NUL from
"\000". Forbid it so it isn't truncated.
fast-import still has other issues with NUL, but those will be addressed
later.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf in `note_change_n` is to copy the remainder of `p` before
potentially invalidating it when reading the next line. However, `p` is
not used after that point. It has been unused since the function was
created in a8dd2e7d2b (fast-import: Add support for importing commit
notes, 2009-10-09) and looks to be a fossil from adapting
`file_change_m`. Remove it.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since filerename was added in f39a946a1f (Support wholesale
directory renames in fast-import, 2007-07-09) and filecopy in b6f3481bb4
(Teach fast-import to recursively copy files/directories, 2007-07-15),
both have produced an error when the destination path is empty. Later,
when support for targeting the root directory with an empty string was
added in 2794ad5244 (fast-import: Allow filemodify to set the root,
2010-10-10), this had the effect of allowing the quoted empty string
(`""`), but forbidding its unquoted variant (``). This seems to have
been intended as simple data validation for parsing two paths, rather
than a syntax restriction, because it was not extended to the other
operations.
All other occurrences of paths (in filemodify, filedelete, the source of
filecopy and filerename, and ls) allow both.
For most of this feature's lifetime, the documentation has not
prescribed the use of quoted empty strings. In e5959106d6
(Documentation/fast-import: put explanation of M 040000 <dataref> "" in
context, 2011-01-15), its documentation was changed from “`<path>` may
also be an empty string (`""`) to specify the root of the tree” to “The
root of the tree can be represented by an empty string as `<path>`”.
Thus, we should assume that some front-ends have depended on this
behavior.
Remove this restriction for the destination paths of filecopy and
filerename and change tests targeting the root to test `""` and ``.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, one case would not write the path to the strbuf: when the
path is unquoted and at the end of the string. It was essentially
copy-on-write. However, with the logic simplification of the previous
commit, this case was eliminated and the strbuf is always populated.
Directly use the strbufs now instead of an alias.
Since this already changes all the lines that use the strbufs, rename
them from `uq` to be more descriptive. That they are unquoted is not
their most important property, so name them after what they carry.
Additionally, `file_change_m` no longer needs to copy the path before
reading inline data.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Path parsing in fast-import is inconsistent and many unquoting errors
are suppressed or not checked.
<path> appears in the grammar in these places:
filemodify ::= 'M' SP <mode> (<dataref> | 'inline') SP <path> LF
filedelete ::= 'D' SP <path> LF
filecopy ::= 'C' SP <path> SP <path> LF
filerename ::= 'R' SP <path> SP <path> LF
ls ::= 'ls' SP <dataref> SP <path> LF
ls-commit ::= 'ls' SP <path> LF
and fast-import.c parses them in five different ways:
1. For filemodify and filedelete:
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes to the end of
the line (including any number of SP).
2. For filecopy (source) and filerename (source):
Try to unquote <path>. If it unquotes without errors, use the
unquoted version; otherwise, treat it as literal bytes up to, but not
including, the next SP.
3. For filecopy (dest) and filerename (dest):
Like 1., but an unquoted empty string is forbidden.
4. For ls:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
5. For ls-commit:
Unquote <path> and report parse errors.
(It must start with `"` to disambiguate from ls.)
In the first three, any errors from trying to unquote a string are
suppressed, so a quoted string that contains invalid escapes would be
interpreted as literal bytes. For example, `"\xff"` would fail to
unquote (because hex escapes are not supported), and it would instead be
interpreted as the byte sequence '"', '\\', 'x', 'f', 'f', '"', which is
certainly not intended. Some front-ends erroneously use their language's
standard quoting routine instead of matching Git's, which could silently
introduce escapes that would be incorrectly parsed due to this and lead
to data corruption.
The documentation states “To use a source path that contains SP the path
must be quoted.”, so it is expected that some implementations depend on
spaces being allowed in paths in the final position. Thus we have two
documented ways to parse paths, so simplify the implementation to that.
Now we have:
1. `parse_path_eol` for filemodify, filedelete, filecopy (dest),
filerename (dest), ls, and ls-commit:
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes to the end of the line
(including any number of SP).
2. `parse_path_space` for filecopy (source) and filerename (source):
If <path> starts with `"`, unquote it and report parse errors;
otherwise, treat it as literal bytes up to, but not including, the
next SP. It must be followed by SP.
There remain two special cases: The dest <path> in filecopy and rename
cannot be an unquoted empty string (this will be addressed subsequently)
and <path> in ls-commit must be quoted to disambiguate it from ls.
Signed-off-by: Thalia Archibald <thalia@archibald.dev>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git checkout/switch --detach foo", after switching to the detached
HEAD state, gave the tracking information for the 'foo' branch,
which was pointless.
Tested-by: M Hickford <mirth.hickford@gmail.com>
cf. <CAGJzqsmE9FDEBn=u3ge4LA3ha4fDbm4OWiuUbMaztwjELBd7ug@mail.gmail.com>
* jc/checkout-detach-wo-tracking-report:
checkout: omit "tracking" information on a detached HEAD
Match the option argument type in the help text to the correct type
updated by a recent series.
* js/merge-tree-3-trees:
merge-tree: fix argument type of the `--merge-base` option
In 5f43cf5b2e (merge-tree: accept 3 trees as arguments, 2024-01-28), I
taught `git merge-tree` to perform three-way merges on trees. This
commit even changed the manual page to state that the `--merge-base`
option takes a tree-ish rather than requiring a commit.
But I forgot to adjust the in-program help text. This patch fixes that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Doc update, as a preparation to enhance "git update-ref --stdin".
* kn/clarify-update-ref-doc:
githooks: use {old,new}-oid instead of {old,new}-value
update-ref: use {old,new}-oid instead of {old,new}value
Use advice_if_enabled() API to rewrite a simple pattern to
call advise() after checking advice_enabled().
* rj/use-adv-if-enabled:
add: use advise_if_enabled for ADVICE_ADD_EMBEDDED_REPO
add: use advise_if_enabled for ADVICE_ADD_EMPTY_PATHSPEC
add: use advise_if_enabled for ADVICE_ADD_IGNORED_FILE
"git pack-refs" learned the "--auto" option, which is a useful
addition to be triggered from "git gc --auto".
Acked-by: Karthik Nayak <karthik.188@gmail.com>
cf. <CAOLa=ZRAEA7rSUoYL0h-2qfEELdbPHbeGpgBJRqesyhHi9Q6WQ@mail.gmail.com>
* ps/pack-refs-auto:
builtin/gc: pack refs when using `git maintenance run --auto`
builtin/gc: forward git-gc(1)'s `--auto` flag when packing refs
t6500: extract objects with "17" prefix
builtin/gc: move `struct maintenance_run_opts`
builtin/pack-refs: introduce new "--auto" flag
builtin/pack-refs: release allocated memory
refs/reftable: expose auto compaction via new flag
refs: remove `PACK_REFS_ALL` flag
refs: move `struct pack_refs_opts` to where it's used
t/helper: drop pack-refs wrapper
refs/reftable: print errors on compaction failure
reftable/stack: gracefully handle failed auto-compaction due to locks
reftable/stack: use error codes when locking fails during compaction
reftable/error: discern locked/outdated errors
reftable/stack: fix error handling in `reftable_stack_init_addition()`
date_mode_from_type() modifies a static variable and returns a pointer
to it. This is not thread-safe. Most callers of date_mode_from_type()
use it via the macro DATE_MODE and pass its result on to functions like
show_date(), which take a const pointer and don't modify the struct.
Avoid the static storage by putting the variable on the stack and
returning the whole struct date_mode. Change functions that take a
constant pointer to expect the whole struct instead.
Reduce the cost of passing struct date_mode around on 64-bit systems
by reordering its members to close the hole between the 32-bit wide
.type and the 64-bit aligned .strftime_fmt as well as the alignment
hole at the end. sizeof reports 24 before and 16 with this change
on x64. Keep .type at the top to still allow initialization without
designator -- though that's only done in a single location, in
builtin/blame.c.
Signed-off-by: René Scharfe <l.s.r@web.de>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
core.commentChar used to be limited to a single byte, but has been
updated to allow an arbitrary multi-byte sequence.
* jk/core-comment-string:
config: add core.commentString
config: allow multi-byte core.commentChar
environment: drop comment_line_char compatibility macro
wt-status: drop custom comment-char stringification
sequencer: handle multi-byte comment characters when writing todo list
find multi-byte comment chars in unterminated buffers
find multi-byte comment chars in NUL-terminated strings
prefer comment_line_str to comment_line_char for printing
strbuf: accept a comment string for strbuf_add_commented_lines()
strbuf: accept a comment string for strbuf_commented_addf()
strbuf: accept a comment string for strbuf_stripspace()
environment: store comment_line_char as a string
strbuf: avoid shadowing global comment_line_char name
commit: refactor base-case of adjust_comment_line_char()
strbuf: avoid static variables in strbuf_add_commented_lines()
strbuf: simplify comment-handling in add_lines() helper
config: forbid newline as core.commentChar
"git config" learned "--comment=<message>" option to leave a
comment immediately after the "variable = value" on the same line
in the configuration file.
* rs/config-comment:
config: allow tweaking whitespace between value and comment
config: fix --comment formatting
config: add --comment option to add a comment
When parsing config keys, the normal pattern is to return 0 after
completing the logic for a specific config key, since no other key will
match. One instance, for "submodule.recurse", was missing this case in
builtin/fetch.c.
This is a very minor change, and will have minimal impact to
performance. This particular block was edited recently in 56e8bb4fb4
(fetch: use `fetch_config` to store "fetch.recurseSubmodules" value,
2023-05-17), which led to some hesitation that perhaps this omission was
on purpose.
However, no later cases within git_fetch_config() will match the key if
equal to "submodule.recurse" and neither will any key matches within the
catch-all git_default_config().
Signed-off-by: Derrick Stolee <stolee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passing untracked path with -u option, it silently succeeds.
There is no error message and the exit code is zero. This is
inconsistent with other instances of git commands where the expected
argument is a known path. In those other instances, we error out when
the path is not known.
Fix this by passing a character array to add_files_to_cache() to
collect the pathspec matching information and report the error if a
pathspec does not match any cache entry. Also add a testcase to cover
this scenario.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we provide a pathspec which does not match any tracked path
alongside --include, we do not error like without --include. If there
is something staged, it will commit the staged changes and ignore the
pathspec which does not match any tracked path. And if nothing is
staged, it will print the status. Exit code is 0 in both cases (unlike
without --include). This is also described in the TODO comment before
the relevant testcase.
Fix this by passing a character array to add_files_to_cache() to
collect the pathspec matching information and error out if the given
path is untracked. Also, amend the testcase to check for the error
message and remove the TODO comment.
Signed-off-by: Ghanshyam Thakkar <shyamthakkar001@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike "git add" and other end-user facing commands, where it is
diagnosed as an error to give a pathspec with an element that does
not match any path, the diff machinery does not care if some
elements of the pathspec do not match. Given that the diff
machinery is heavily used in pathspec-limited "git log" machinery,
and it is common for a path to come and go while traversing the
project history, this is usually a good thing.
However, in some cases we would want to know if all the pathspec
elements matched. For example, "git add -u <pathspec>" internally
uses the machinery used by "git diff-files" to decide contents from
what paths to add to the index, and as an end-user facing command,
"git add -u" would want to report an unmatched pathspec element.
Add a new .ps_matched member next to the .prune_data member in
"struct rev_info" so that we can optionally keep track of the use of
.prune_data pathspec elements that can be inspected by the caller.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Windows 10 build 17063 introduced support for unix sockets to Windows.
bb390b1 (git-compat-util: include declaration for unix sockets in
windows, 2021-09-14) introduced a way to build git with unix socket
support on Windows, but you still had to decide at build time which
Windows version the compiled executable was supposed to run on.
We can detect at runtime wether the operating system supports unix
sockets and act accordingly for all supported Windows versions.
This fixes https://github.com/git-for-windows/git/issues/3892
Signed-off-by: Matthias Aßhauer <mha1993@live.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow git-cherry-pick(1) to automatically drop redundant commits via
a new `--empty` option, similar to the `--empty` options for
git-rebase(1) and git-am(1). Includes a soft deprecation of
`--keep-redundant-commits` as well as some related docs changes and
sequencer code cleanup.
* bl/cherry-pick-empty:
cherry-pick: add `--empty` for more robust redundant commit handling
cherry-pick: enforce `--keep-redundant-commits` incompatibility
sequencer: do not require `allow_empty` for redundant commit options
sequencer: handle unborn branch with `--allow-empty`
rebase: update `--empty=ask` to `--empty=stop`
docs: clean up `--empty` formatting in git-rebase(1) and git-am(1)
docs: address inaccurate `--empty` default with `--exec`
The `git-update-ref` command is used to modify references. The usage of
{old,new}value in the documentation refers to the OIDs. This is fine
since the command only works with regular references which hold OIDs.
But if the command is updated to support symrefs, we'd also be dealing
with {old,new}-refs.
To improve clarity around what exactly {old,new}value mean, let's rename
it to {old,new}-oid.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hints that suggest what to do after resolving conflicts can now be
squelched by disabling advice.mergeConflict.
Acked-by: Phillip Wood <phillip.wood123@gmail.com>
cf. <e040c631-42d9-4501-a7b8-046f8dac6309@gmail.com>
* pb/advice-merge-conflict:
builtin/am: allow disabling conflict advice
sequencer: allow disabling conflict advice
Code clean-up in the "git log" machinery that implements custom log
message formatting.
* jk/pretty-subject-cleanup:
format-patch: fix leak of empty header string
format-patch: simplify after-subject MIME header handling
format-patch: return an allocated string from log_write_email_headers()
log: do not set up extra_headers for non-email formats
pretty: drop print_email_subject flag
pretty: split oneline and email subject printing
shortlog: stop setting pp.print_email_subject
"git checkout --conflict=bad" reported a bad conflictStyle as if it
were given to a configuration variable; it has been corrected to
report that the command line option is bad.
* pw/checkout-conflict-errorfix:
checkout: fix interaction between --conflict and --merge
checkout: cleanup --conflict=<style> parsing
merge options: add a conflict style member
merge-ll: introduce LL_MERGE_OPTIONS_INIT
xdiff-interface: refactor parsing of merge.conflictstyle
By following a similar reasoning as in previous commits, there are no
reason why we should not use the advise_if_enabled() API to display the
ADVICE_ADD_EMBEDDED_REPO advice.
This advice was introduced in 532139940c (add: warn when adding an
embedded repository, 2017-06-14). Some tests were included in the
commit, but none is testing this advice. Which, note, we only want to
display once per run.
So, use the advise_if_enabled() machinery to show the
ADVICE_ADD_EMBEDDED_REPO advice and include a test to notice any
possible breakage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 93b0d86aaf (git-add: error out when given no arguments.,
2006-12-20) we display a message when no arguments are given to "git
add".
Part of that message was converted to advice in bf66db37f1 (add: use
advise function to display hints, 2020-01-07).
Following the same line of reasoning as in the previous commit, it is
sensible to use advise_if_enabled() here.
Therefore, use advise_if_enabled() in builtin/add.c to show the
ADVICE_ADD_EMPTY_PATHSPEC advice, and don't bother checking there the
visibility of the advice or displaying the instruction on how to disable
it.
Also add a test for these messages, in order to detect a possible
change in them.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b3b18d1621 (advice: revamp advise API, 2020-03-02), we can use
advise_if_enabled() to display an advice. This API encapsulates three
actions:
1.- checking the visibility of the advice
2.- displaying the advice when appropriate
3.- displaying instructions on how to disable the advice, when
appropriate
The code we have in builtin/add.c to display the ADVICE_ADD_IGNORED_FILE
advice, is doing these three things. However, the instructions
displayed on how to disable the hint are not shown in the normalized way
that advise_if_enabled() introduced. This may cause distraction.
There is no reason not to use the new API here. On the contrary, by
using it we gain simplicity in the code and avoid possible distractions.
For these reasons, use the newer advise_if_enabled() machinery to show
the ADVICE_ADD_IGNORED_FILE advice, and don't bother checking the
visibility or displaying the instruction on how to disable the advice.
Signed-off-by: Rubén Justo <rjusto@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By definition, a detached HEAD state is tentative and there is no
configured "upstream" that it always wants to integrate with. But
if you detach from a branch that is behind its upstream, e.g.,
$ git checkout -t -b main origin/main
$ git checkout main
$ git reset --hard HEAD^
$ git checkout --detach main
you'd see "you are behind your upstream origin/main". This does not
happen when you replace the last step in the above with any of these
$ git checkout HEAD^0
$ git checkout --detach HEAD
$ git checkout --detach origin/main
Before 32669671 (checkout: introduce --detach synonym for "git
checkout foo^{commit}", 2011-02-08) introduced the "--detach"
option, the rule to decide if we show the tracking information
used to be:
If --quiet is not given, and if the given branch name is a real
local branch (i.e. the one we can compute the file path under
.git/, like 'refs/heads/master' or "HEAD" which stand for the
name of the current branch", then give the tracking information.
to exclude things like "git checkout master^0" (which was the
official way to detach HEAD at the commit before that commit) and
"git checkout origin/master^0" from showing tracking information,
but still do show the tracking information for the current branch
for "git checkout HEAD". The introduction of an explicit option
"--detach" broke this subtley. The new rule should have been
If --quiet is given, do not bother with tracking info.
If --detach is given, do not bother with tracking info.
Otherwise, if we know that the branch name given is a real local
branch, or if we were given "HEAD" and "HEAD" is not detached,
then attempt to show the tracking info.
but it allowed "git checkout --detach master" to also show the
tracking info by mistake. Let's tighten the rule to fix this.
Reported-by: mirth hickford <mirth.hickford@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The status.showUntrackedFiles configuration variable had a name
that tempts users to set a Boolean value expressed in our usual
"false", "off", and "0", but it only took "no". This has been
corrected so "true" and its synonyms are taken as "normal", while
"false" and its synonyms are taken as "no".
* jc/show-untracked-false:
status: allow --untracked=false and friends
status: unify parsing of --untracked= and status.showUntrackedFiles
Work to support a repository that work with both SHA-1 and SHA-256
hash algorithms has started.
* eb/hash-transition: (30 commits)
t1016-compatObjectFormat: add tests to verify the conversion between objects
t1006: test oid compatibility with cat-file
t1006: rename sha1 to oid
test-lib: compute the compatibility hash so tests may use it
builtin/ls-tree: let the oid determine the output algorithm
object-file: handle compat objects in check_object_signature
tree-walk: init_tree_desc take an oid to get the hash algorithm
builtin/cat-file: let the oid determine the output algorithm
rev-parse: add an --output-object-format parameter
repository: implement extensions.compatObjectFormat
object-file: update object_info_extended to reencode objects
object-file-convert: convert commits that embed signed tags
object-file-convert: convert commit objects when writing
object-file-convert: don't leak when converting tag objects
object-file-convert: convert tag objects when writing
object-file-convert: add a function to convert trees between algorithms
object: factor out parse_mode out of fast-import and tree-walk into in object.h
cache: add a function to read an OID of a specific algorithm
tag: sign both hashes
commit: export add_header_signature to support handling signatures on tags
...
As with git-rebase(1) and git-am(1), git-cherry-pick(1) can result in a
commit being made redundant if the content from the picked commit is
already present in the target history. However, git-cherry-pick(1) does
not have the same options available that git-rebase(1) and git-am(1) have.
There are three things that can be done with these redundant commits:
drop them, keep them, or have the cherry-pick stop and wait for the user
to take an action. git-rebase(1) has the `--empty` option added in commit
e98c4269c8 (rebase (interactive-backend): fix handling of commits that
become empty, 2020-02-15), which handles all three of these scenarios.
Similarly, git-am(1) got its own `--empty` in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09).
git-cherry-pick(1), on the other hand, only supports two of the three
possiblities: Keep the redundant commits via `--keep-redundant-commits`,
or have the cherry-pick fail by not specifying that option. There is no
way to automatically drop redundant commits.
In order to bring git-cherry-pick(1) more in-line with git-rebase(1) and
git-am(1), this commit adds an `--empty` option to git-cherry-pick(1). It
has the same three options (keep, drop, and stop), and largely behaves
the same. The notable difference is that for git-cherry-pick(1), the
default will be `stop`, which maintains the current behavior when the
option is not specified.
Like the existing `--keep-redundant-commits`, `--empty=keep` will imply
`--allow-empty`.
The `--keep-redundant-commits` option will be documented as a deprecated
synonym of `--empty=keep`, and will be supported for backwards
compatibility for the time being.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When `--keep-redundant-commits` was added in b27cfb0d8d
(git-cherry-pick: Add keep-redundant-commits option, 2012-04-20), it was
not marked as incompatible with the various operations needed to
continue or exit a cherry-pick (`--continue`, `--skip`, `--abort`, and
`--quit`).
Enforce this incompatibility via `verify_opt_compatible` like we do for
the other various options.
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-am(1) got its own `--empty` option in 7c096b8d61 (am: support
--empty=<option> to handle empty patches, 2021-12-09), `stop` was used
instead of `ask`. `stop` is a more accurate term for describing what
really happens, and consistency is good.
Update git-rebase(1) to also use `stop`, while keeping `ask` as a
deprecated synonym. Update the tests to primarily use `stop`, but also
ensure that `ask` is still allowed.
In a future commit, we'll be adding a new `--empty` option for
git-cherry-pick(1) as well, making the consistency even more relevant.
Reported-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Brian Lyles <brianmlyles@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bugreport --no-suffix" was not supported and instead
segfaulted, which has been corrected.
* js/bugreport-no-suffix-fix:
bugreport.c: fix a crash in `git bugreport` with `--no-suffix` option
Report unknown format elements and missing closing parentheses with
consistent and translated messages by calling strbuf_expand_bad_format()
at the very end of the combined if/else chain of expand_format() and
expand_atom().
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract a function for reporting placeholders that are not enclosed in a
parenthesis or are unknown. This reduces the number of strings to
translate and improves consistency across commands. Call it at the end
of the if/else chain, after exhausting all accepted possibilities.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano