Our documentation claims we support curl versions back to 7.19.5. But we
can no longer compile with that version since adding an unconditional
use of CURLOPT_RESOLVE in 511cfd3bff (http: add custom hostname to IP
address resolutions, 2022-05-16). That feature wasn't added to libcurl
until 7.21.3.
We could add #ifdefs to make this work back to 7.19.5. But given that
nobody noticed the compilation failure in the intervening two years, it
makes more sense to bump the version in the documentation to 7.21.3
(which is itself over 13 years old).
We could perhaps go forward even more (which would let us drop some
cruft from git-curl-compat.h), but this should be an obviously safe
jump, and we can move forward later.
Note that user-visible syntax for CURLOPT_RESOLVE has grown new features
in subsequent curl versions. Our documentation mentions "+" and "-"
entries, which require more recent versions than 7.21.3. We could
perhaps clarify that in our docs, but it's probably not worth cluttering
them with restrictions of ancient curl versions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Stale URLs have been updated to their current counterparts (or
archive.org) and HTTP links are replaced with working HTTPS links.
* js/update-urls-in-doc-and-comment:
doc: refer to internet archive
doc: update links for andre-simon.de
doc: switch links to https
doc: update links to current pages
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The following commit will make use of a Getopt::Long feature which is
only present in Perl >= 5.8.1. Document that as the minimum version we
support.
Many of our Perl scripts will continue to run with 5.8.0 but this change
allows us to adjust them as needed without breaking any promises to our
users.
The Perl requirement was last changed in d48b284183 (perl: bump the
required Perl version to 5.8 from 5.6.[21], 2010-09-24). At that time,
5.8.0 was 8 years old. It is now over 21 years old.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since [1] first released with Git v2.37.0 the built-in version of "add
-i" has been the default. That built-in implementation was added in
[2], first released with Git v2.25.0.
At this point enough time has passed to allow for finding any
remaining bugs in this new implementation, so let's remove the
fallback code.
As with similar migrations for "stash"[3] and "rebase"[4] we're
keeping a mention of "add.interactive.useBuiltin" in the
documentation, but adding a warning() to notify any outstanding users
that the built-in is now the default. As with [5] and [6] we should
follow-up in the future and eventually remove that warning.
1. 0527ccb1b5 (add -i: default to the built-in implementation,
2021-11-30)
2. f83dff60a7 (Start to implement a built-in version of `git add
--interactive`, 2019-11-13)
3. 8a2cd3f512 (stash: remove the stash.useBuiltin setting,
2020-03-03)
4. d03ebd411c (rebase: remove the rebase.useBuiltin setting,
2019-03-18)
5. deeaf5ee07 (stash: remove documentation for `stash.useBuiltin`,
2022-01-27)
6. 9bcde4d531 (rebase: remove transitory rebase.useBuiltin setting &
env, 2021-03-23)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The claim that OpenSSL is the default SHA-1 backend hasn't been true
since e6b07da278 (Makefile: make DC_SHA1 the default, 2017-03-17),
but more importantly tweaking the SHA-1 backend isn't something that's
common enough to warrant discussing in the INSTALL document, so let's
remove this paragraph.
This discussion was originally added in c538d2d34a (Add some
installation notes in INSTALL, 2005-06-17) when tweaking the default
backend was more common. The current wording was added in
5beb577db8 (INSTALL: Describe dependency knobs from Makefile,
2009-09-10).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Remove the PPC_SHA1 implementation added in a6ef3518f9 ([PATCH] PPC
assembly implementation of SHA1, 2005-04-22). When this was added
Apple consumer hardware used the PPC architecture, and the
implementation was intended to improve SHA-1 speed there.
Since it was added we've moved to using sha1collisiondetection by
default, and anyone wanting hard-rolled non-DC SHA-1 implementation
can use OpenSSL's via the OPENSSL_SHA1 knob.
The PPC_SHA1 originally originally targeted 32 bit PPC, and later the
64 bit PPC 970 (a.k.a. Apple PowerPC G5). See 926172c5e4 (block-sha1:
improve code on large-register-set machines, 2009-08-10) for a
reference about the performance on G5 (a comment in block-sha1/sha1.c
being removed here).
I can't get it to do anything but segfault on both the BE and LE POWER
machines in the GCC compile farm[1]. Anyone who's concerned about
performance on PPC these days is likely to be using the IBM POWER
processors.
There have been proposals to entirely remove non-sha1collisiondetection
implementations from the tree[2]. I think per [3] that would be a bit
overzealous. I.e. there are various set-ups git's speed is going to be
more important than the relatively implausible SHA-1 collision attack,
or where such attacks are entirely mitigated by other means (e.g. by
incoming objects being checked with DC_SHA1).
But that really doesn't apply to PPC_SHA1 in particular, which seems
to have outlived its usefulness.
As this gets rid of the only in-tree *.S assembly file we can remove
the small bits of logic from the Makefile needed to build objects
from *.S (as opposed to *.c)
The code being removed here was also throwing warnings with the
"-pedantic" flag, it could have been fixed as 544d93bc3b (block-sha1:
remove use of obsolete x86 assembly, 2022-03-10) did for block-sha1/*,
but as noted above let's remove it instead.
1. https://cfarm.tetaneutral.net/machines/list/
Tested on gcc{110,112,135,203}, a mixture of POWER [789] ppc64 and
ppc64le. All segfault in anything needing object
hashing (e.g. t/t1007-hash-object.sh) when compiled with
PPC_SHA1=Y.
2. https://lore.kernel.org/git/20200223223758.120941-1-mh@glandium.org/
3. https://lore.kernel.org/git/20200224044732.GK1018190@coredump.intra.peff.net/
Acked-by: brian m. carlson" <sandals@crustytoothpaste.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without NO_CURL=Y we require at least version "7.19.4" of libcurl, see
644de29e22 (http: drop support for curl < 7.19.4, 2021-07-30). Let's
document this in the "INSTALL" document.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the "libcurl" section shorter and more to the point, this is
mostly based on suggestions from [1].
1. https://lore.kernel.org/git/YTtxcBdF2VQdWp5C@coredump.intra.peff.net/
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 1d53f90ed9 (The "curl" executable is no longer required,
2008-06-15) the wording for requiring curl(1) was changed to the
current "you might also want...".
Mentioning the "curl" executable at all is just confusing, someone
building git might want to use it to debug things, but they might also
just use wget(1) or some other http client. The "curl" executable has
the advantage that you might be able to e.g. reproduce a bug in git's
usage of libcurl with it, but anyone going to those extents is
unlikely to be aided by this note in INSTALL.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Note on using Asciidoctor to build documentation suite.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0b4396f068, (git-p4: make python2.7 the oldest supported version,
2019-12-13) pointed out that git-p4 uses Python 2.7-or-later features
in the code.
In addition, git-p4 gained enough support for Python 3 from
6cec21a82f, (git-p4: encode/decode communication with p4 for
python3, 2019-12-13).
Let's update our documentation to reflect that fact.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Several of the previous commits have been bumping the minimum supported
version of docbook-xsl and dropping various workarounds. Most recently,
we made the minimum be 1.73.0.
In INSTALL, we claim that with 1.73, one needs a certain patch in
contrib/patches/. There is no such patch. It was added in 2ec39edad9
("INSTALL: add warning on docbook-xsl 1.72 and 1.73", 2007-08-03) and
dropped in 9721ac9010 ("contrib: remove continuous/ and patches/",
2013-06-03).
Rather than resurrecting version 1.73 and the patch and testing them,
just raise our minimum supported docbook-xsl version to 1.74.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the DOCBOOK_XSL_172 config knob, which was needed with docbook-xsl
1.72 (but neither 1.71 nor 1.73). Version 1.73.0 is more than twelve
years old.
Together with the last few commits, we are now at a point where we don't
have any Makefile knobs to cater to old/broken versions of docbook-xsl.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
docbook-xsl 1.72.0 is thirteen years old. Drop the ASCIIDOC_ROFF knob
which was needed to support 1.68.1 - 1.71.1. The next commit will
increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the DOCBOOK_SUPPRESS_SP mechanism, which needs to be used with
docbook-xsl versions 1.69.1 through 1.71.0.
We probably broke this for Asciidoctor builds in f6461b82b9
("Documentation: fix build with Asciidoctor 2", 2019-09-15). That is, we
should/could fix this similar to 55aca515eb ("manpage-bold-literal.xsl:
match for namespaced "d:literal" in template", 2019-10-31). But rather
than digging out such an old version of docbook-xsl to test that, let's
just use this as an excuse for dropping this decade-old workaround.
DOCBOOK_SUPPRESS_SP was not needed with docbook-xsl 1.69.0 and older.
Maybe such old versions still work fine on our docs, or maybe not. Let's
just refer to everything before 1.71.1 as "not supported". The next
commit will increase the required/assumed version further.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Script git-pull.sh has been removed in commit [1]. Use command
"request-pull" as an example of a shell script instead. Recently, many
of shell script commands have been re-written in C, so tweak the wording
of the sentence, while we're here.
[1]: b1456605c2 (pull: remove redirection to git-pull.sh, 2015-06-18)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document changes to core and non-core Perl module handling in 2.17.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before my 20d2a30f8f ("Makefile: replace perl/Makefile.PL with simple
make rules", 2017-12-10) on an OS package that removed the
private-Error.pm copy we carried around manually removing the OS's
Error.pm would yield:
$ git add -p
Can't locate Error.pm in @INC (you may need to install the Error module) [...]
Now, before this change we'll instead emit this more cryptic error:
$ git add -p
BUG: '/usr/share/perl5/Git/FromCPAN' should be a directory! at /usr/share/perl5/Git/Error.pm line 36.
This is a confusing error. Now if the new NO_PERL_CPAN_FALLBACKS
option is specified and we can't find the module we'll instead emit:
$ /tmp/git/bin/git add -p
BUG: The 'Error' module is not here, but NO_PERL_CPAN_FALLBACKS was set!
[...]
Where [...] is the lengthy explanation seen in the change below, which
explains what the potential breakage is, and how to fix it.
The reason for checking @@NO_PERL_CPAN_FALLBACKS@@] against the empty
string in Perl is as opposed to checking for a boolean value is that
that's (as far as I can tell) make's idea of a string that's set, and
e.g. NO_PERL_CPAN_FALLBACKS=0 is enough to set NO_PERL_CPAN_FALLBACKS.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use libcurl's high-level API functions to implement git-imap-send
instead of the previous low-level OpenSSL-based functions.
Since version 7.30.0, libcurl's API has been able to communicate with
IMAP servers. Using those high-level functions instead of the current
ones would reduce imap-send.c by some 1200 lines of code. For now,
the old ones are wrapped in #ifdefs, and the new functions are enabled
by make if curl's version is >= 7.34.0, from which version on curl's
CURLOPT_LOGIN_OPTIONS (enabling IMAP authentication) parameter has been
available. The low-level functions will still be used for tunneling
into the server for now.
As I don't have access to that many IMAP servers, I haven't been able to
test the new code with a wide variety of parameter combinations. I did
test both secure and insecure (imaps:// and imap://) connections and
values of "PLAIN" and "LOGIN" for the authMethod.
In order to suppress a sparse warning about "using sizeof on a
function", we use the same solution used in commit 9371322a6
("sparse: suppress some "using sizeof on a function" warnings",
06-10-2013) which solved exactly this problem for the other commands
using libcurl.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.4 lacks the following features:
subprocess.check_call
struct.pack_into
Take a cue from 460d1026 and provide an implementation of the
CalledProcessError exception. Then replace the calls to
subproccess.check_call with calls to subprocess.call that check the return
status and raise a CalledProcessError exception if necessary.
The struct.pack_into in t/9802 can be converted into a single struct.pack
call which is available in Python 2.4.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.5 and older do not accept None as the first argument to
translate() and complain with:
TypeError: expected a character buffer object
As suggested by Pete Wyckoff, let's just replace the call to translate()
with a regex search which should be more clear and more portable.
This allows git-p4 to be used with Python 2.5.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 6cf378f (docs: stop using asciidoc no-inline-literal),
we no longer support asciidoc versions less than 8.4.1,
which introduced inline literals. Note this in the INSTALL
document.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a number of problems I ran into when trying the
profile-directed optimizations added by Andi Kleen in git commit
7ddc2710b9. (This was using gcc 4.4 found on many enterprise
distros.)
1) The -fprofile-generate and -fprofile-use commands are incompatible
with ccache; the code ends up looking in the wrong place for the gcda
files based on the ccache object names.
2) If the makefile notices that CFLAGS are different, it will rebuild
all of the binaries. Hence the recipe originally specified by the
INSTALL file ("make profile-all" followed by "make install") doesn't
work. It will appear to work, but the binaries will end up getting
built with no optimization.
This patch fixes this by using an explicit set of options passed via
the PROFILE variable then using this to directly manipulate CFLAGS and
EXTLIBS.
The developer can run "make PROFILE=BUILD all ; sudo make
PROFILE=BUILD install" automatically run a two-pass build with the
test suite run in between as the sample workload for the purpose of
recording profiling information to do the profile-directed
optimization.
Alternatively, the profiling version of binaries can be built using:
make PROFILE=GEN PROFILE_DIR=/var/cache/profile all
make PROFILE=GEN install
and then after git has been used for a while, the optimized version of
the binary can be built as follows:
make PROFILE=USE PROFILE_DIR=/var/cache/profile all
make PROFILE=USE install
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent releases of Redhat/Fedora are reported to ship Perl binary package
with some core modules stripped away (see http://lwn.net/Articles/477234/)
against the upstream Perl5 people's wishes. The Time::HiRes module used by
gitweb one of them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preformatted documentation pages live in their own repositories
these days. Adjust the installation procedure to the updated layout.
Tested-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ASCIIDOC8 and ASCIIDOC_NO_ROFF knobs were built,
many people were still on asciidoc 7 and using older
versions of docbook-xsl. These days, even the almost
2-year-old Debian stable needs these knobs turned.
So let's turn them by default. The new knobs ASCIIDOC7 and
ASCIIDOC_ROFF can be used to get the old behavior if people
are on older systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without additional configuration steps, the documentation build on Cygwin
fails because the XML catalog is missing required rewrites for certain
docbook resources.
This patch documents the required configuration.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new scripts automatically saved in the bin-wrappers directory allow
you to run a build when you have neither installed git nor tweaked
environment variables. Mention this in INSTALL, along with the slight
performance issue of doing so.
This can be especially handy for manually testing network-invoked git
(from ssh, web servers, or similar), but it is also handy with a plain
command prompt.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We said that some of our dependencies were optional, but didn't say
how to turn them off. Add information for that and mention where to
save the options close to the top of the file.
Also, standardize on both using quotes for the names of the dependencies
and tabs for indentation of the list.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most important and non-optional dependencies should go first, so put
them there. While we're moving them, the descriptions for shell and perl
were archaic, referring to "bare-bones Porcelainish scripts" that have
become powerful and essential.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We haven't had Mozilla's code or an ARM optimized algorithm since
30ae47b. Reword the paragraph to give credit but not authorship to
Mozilla.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces new build targets "man" and "html" which allow building
the documentation in the respective formats separately. This helps
people with a partial documentation build chain: html pages can be built
without xmlto.
This is documented in INSTALL now, together with corrections: Before,
instructions in INSTALL would build man+html but install man only. Now
the instructions build and install both, and new and pre-existing
targets are explained.
Note that build targets "doc" and "man" correspond to install targets
"install-doc install-html" and "install-doc" respectively. This
inconsistency is not changed, in order to keep everyone's build scripts
from breaking.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mention of 1997 was correct when it was made, and it still is true
to some extent (http://savannah.gnu.org/forum/forum.php?forum_id=5189
says it has not been actively maintained for quite some time). However,
because its name changed not to conflict with us, it is no longer
relevant whether many users use gnuit or have moved away to graphical
file managers.
The only people possibly affected are people who have older version of
gnuit installed as "git".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old text stated that 'git-frotz' can be always used instead of 'git
frotz' which is no longer true.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King