git/http-backend.c

796 lines
19 KiB
C
Raw Normal View History

#include "cache.h"
#include "config.h"
#include "repository.h"
#include "refs.h"
#include "pkt-line.h"
#include "object.h"
#include "tag.h"
#include "exec-cmd.h"
#include "run-command.h"
#include "string-list.h"
#include "url.h"
#include "argv-array.h"
#include "packfile.h"
#include "object-store.h"
#include "protocol.h"
static const char content_type[] = "Content-Type";
static const char content_length[] = "Content-Length";
static const char last_modified[] = "Last-Modified";
static int getanyfile = 1;
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
static unsigned long max_request_buffer = 10 * 1024 * 1024;
static struct string_list *query_params;
struct rpc_service {
const char *name;
const char *config_name;
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
unsigned buffer_input : 1;
signed enabled : 2;
};
static struct rpc_service rpc_service[] = {
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
{ "upload-pack", "uploadpack", 1, 1 },
{ "receive-pack", "receivepack", 0, -1 },
};
static struct string_list *get_parameters(void)
{
if (!query_params) {
const char *query = getenv("QUERY_STRING");
query_params = xcalloc(1, sizeof(*query_params));
while (query && *query) {
char *name = url_decode_parameter_name(&query);
char *value = url_decode_parameter_value(&query);
struct string_list_item *i;
i = string_list_lookup(query_params, name);
if (!i)
i = string_list_insert(query_params, name);
else
free(i->util);
i->util = value;
}
}
return query_params;
}
static const char *get_parameter(const char *name)
{
struct string_list_item *i;
i = string_list_lookup(get_parameters(), name);
return i ? i->util : NULL;
}
__attribute__((format (printf, 2, 3)))
static void format_write(int fd, const char *fmt, ...)
{
static char buffer[1024];
va_list args;
unsigned n;
va_start(args, fmt);
n = vsnprintf(buffer, sizeof(buffer), fmt, args);
va_end(args);
if (n >= sizeof(buffer))
die("protocol error: impossibly long line");
write_or_die(fd, buffer, n);
}
static void http_status(struct strbuf *hdr, unsigned code, const char *msg)
{
strbuf_addf(hdr, "Status: %u %s\r\n", code, msg);
}
static void hdr_str(struct strbuf *hdr, const char *name, const char *value)
{
strbuf_addf(hdr, "%s: %s\r\n", name, value);
}
static void hdr_int(struct strbuf *hdr, const char *name, uintmax_t value)
{
strbuf_addf(hdr, "%s: %" PRIuMAX "\r\n", name, value);
}
static void hdr_date(struct strbuf *hdr, const char *name, timestamp_t when)
{
convert "enum date_mode" into a struct In preparation for adding date modes that may carry extra information beyond the mode itself, this patch converts the date_mode enum into a struct. Most of the conversion is fairly straightforward; we pass the struct as a pointer and dereference the type field where necessary. Locations that declare a date_mode can use a "{}" constructor. However, the tricky case is where we use the enum labels as constants, like: show_date(t, tz, DATE_NORMAL); Ideally we could say: show_date(t, tz, &{ DATE_NORMAL }); but of course C does not allow that. Likewise, we cannot cast the constant to a struct, because we need to pass an actual address. Our options are basically: 1. Manually add a "struct date_mode d = { DATE_NORMAL }" definition to each caller, and pass "&d". This makes the callers uglier, because they sometimes do not even have their own scope (e.g., they are inside a switch statement). 2. Provide a pre-made global "date_normal" struct that can be passed by address. We'd also need "date_rfc2822", "date_iso8601", and so forth. But at least the ugliness is defined in one place. 3. Provide a wrapper that generates the correct struct on the fly. The big downside is that we end up pointing to a single global, which makes our wrapper non-reentrant. But show_date is already not reentrant, so it does not matter. This patch implements 3, along with a minor macro to keep the size of the callers sane. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-06-25 18:55:02 +02:00
const char *value = show_date(when, 0, DATE_MODE(RFC2822));
hdr_str(hdr, name, value);
}
static void hdr_nocache(struct strbuf *hdr)
{
hdr_str(hdr, "Expires", "Fri, 01 Jan 1980 00:00:00 GMT");
hdr_str(hdr, "Pragma", "no-cache");
hdr_str(hdr, "Cache-Control", "no-cache, max-age=0, must-revalidate");
}
static void hdr_cache_forever(struct strbuf *hdr)
{
timestamp_t now = time(NULL);
hdr_date(hdr, "Date", now);
hdr_date(hdr, "Expires", now + 31536000);
hdr_str(hdr, "Cache-Control", "public, max-age=31536000");
}
static void end_headers(struct strbuf *hdr)
{
strbuf_add(hdr, "\r\n", 2);
write_or_die(1, hdr->buf, hdr->len);
strbuf_release(hdr);
}
__attribute__((format (printf, 2, 3)))
static NORETURN void not_found(struct strbuf *hdr, const char *err, ...)
{
va_list params;
http_status(hdr, 404, "Not Found");
hdr_nocache(hdr);
end_headers(hdr);
va_start(params, err);
if (err && *err)
vfprintf(stderr, err, params);
va_end(params);
exit(0);
}
__attribute__((format (printf, 2, 3)))
static NORETURN void forbidden(struct strbuf *hdr, const char *err, ...)
{
va_list params;
http_status(hdr, 403, "Forbidden");
hdr_nocache(hdr);
end_headers(hdr);
va_start(params, err);
if (err && *err)
vfprintf(stderr, err, params);
va_end(params);
exit(0);
}
static void select_getanyfile(struct strbuf *hdr)
{
if (!getanyfile)
forbidden(hdr, "Unsupported service: getanyfile");
}
static void send_strbuf(struct strbuf *hdr,
const char *type, struct strbuf *buf)
{
hdr_int(hdr, content_length, buf->len);
hdr_str(hdr, content_type, type);
end_headers(hdr);
write_or_die(1, buf->buf, buf->len);
}
static void send_local_file(struct strbuf *hdr, const char *the_type,
const char *name)
{
char *p = git_pathdup("%s", name);
size_t buf_alloc = 8192;
char *buf = xmalloc(buf_alloc);
int fd;
struct stat sb;
fd = open(p, O_RDONLY);
if (fd < 0)
not_found(hdr, "Cannot open '%s': %s", p, strerror(errno));
if (fstat(fd, &sb) < 0)
die_errno("Cannot stat '%s'", p);
hdr_int(hdr, content_length, sb.st_size);
hdr_str(hdr, content_type, the_type);
hdr_date(hdr, last_modified, sb.st_mtime);
end_headers(hdr);
for (;;) {
ssize_t n = xread(fd, buf, buf_alloc);
if (n < 0)
die_errno("Cannot read '%s'", p);
if (!n)
break;
write_or_die(1, buf, n);
}
close(fd);
free(buf);
free(p);
}
static void get_text_file(struct strbuf *hdr, char *name)
{
select_getanyfile(hdr);
hdr_nocache(hdr);
send_local_file(hdr, "text/plain", name);
}
static void get_loose_object(struct strbuf *hdr, char *name)
{
select_getanyfile(hdr);
hdr_cache_forever(hdr);
send_local_file(hdr, "application/x-git-loose-object", name);
}
static void get_pack_file(struct strbuf *hdr, char *name)
{
select_getanyfile(hdr);
hdr_cache_forever(hdr);
send_local_file(hdr, "application/x-git-packed-objects", name);
}
static void get_idx_file(struct strbuf *hdr, char *name)
{
select_getanyfile(hdr);
hdr_cache_forever(hdr);
send_local_file(hdr, "application/x-git-packed-objects-toc", name);
}
static void http_config(void)
{
int i, value = 0;
struct strbuf var = STRBUF_INIT;
git_config_get_bool("http.getanyfile", &getanyfile);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
git_config_get_ulong("http.maxrequestbuffer", &max_request_buffer);
for (i = 0; i < ARRAY_SIZE(rpc_service); i++) {
struct rpc_service *svc = &rpc_service[i];
strbuf_addf(&var, "http.%s", svc->config_name);
if (!git_config_get_bool(var.buf, &value))
svc->enabled = value;
strbuf_reset(&var);
}
strbuf_release(&var);
}
static struct rpc_service *select_service(struct strbuf *hdr, const char *name)
{
const char *svc_name;
struct rpc_service *svc = NULL;
int i;
if (!skip_prefix(name, "git-", &svc_name))
forbidden(hdr, "Unsupported service: '%s'", name);
for (i = 0; i < ARRAY_SIZE(rpc_service); i++) {
struct rpc_service *s = &rpc_service[i];
if (!strcmp(s->name, svc_name)) {
svc = s;
break;
}
}
if (!svc)
forbidden(hdr, "Unsupported service: '%s'", name);
if (svc->enabled < 0) {
const char *user = getenv("REMOTE_USER");
svc->enabled = (user && *user) ? 1 : 0;
}
if (!svc->enabled)
forbidden(hdr, "Service not enabled: '%s'", svc->name);
return svc;
}
static void write_to_child(int out, const unsigned char *buf, ssize_t len, const char *prog_name)
{
if (write_in_full(out, buf, len) < 0)
die("unable to write to '%s'", prog_name);
}
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
/*
* This is basically strbuf_read(), except that if we
* hit max_request_buffer we die (we'd rather reject a
* maliciously large request than chew up infinite memory).
*/
static ssize_t read_request_eof(int fd, unsigned char **out)
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
{
size_t len = 0, alloc = 8192;
unsigned char *buf = xmalloc(alloc);
if (max_request_buffer < alloc)
max_request_buffer = alloc;
while (1) {
ssize_t cnt;
cnt = read_in_full(fd, buf + len, alloc - len);
if (cnt < 0) {
free(buf);
return -1;
}
/* partial read from read_in_full means we hit EOF */
len += cnt;
if (len < alloc) {
*out = buf;
return len;
}
/* otherwise, grow and try again (if we can) */
if (alloc == max_request_buffer)
die("request was larger than our maximum size (%lu);"
" try setting GIT_HTTP_MAX_REQUEST_BUFFER",
max_request_buffer);
alloc = alloc_nr(alloc);
if (alloc > max_request_buffer)
alloc = max_request_buffer;
REALLOC_ARRAY(buf, alloc);
}
}
static ssize_t read_request_fixed_len(int fd, ssize_t req_len, unsigned char **out)
{
unsigned char *buf = NULL;
ssize_t cnt = 0;
if (max_request_buffer < req_len) {
die("request was larger than our maximum size (%lu): "
"%" PRIuMAX "; try setting GIT_HTTP_MAX_REQUEST_BUFFER",
max_request_buffer, (uintmax_t)req_len);
}
buf = xmalloc(req_len);
cnt = read_in_full(fd, buf, req_len);
if (cnt < 0) {
free(buf);
return -1;
}
*out = buf;
return cnt;
}
static ssize_t get_content_length(void)
{
ssize_t val = -1;
const char *str = getenv("CONTENT_LENGTH");
if (str && *str && !git_parse_ssize_t(str, &val))
die("failed to parse CONTENT_LENGTH: %s", str);
return val;
}
static ssize_t read_request(int fd, unsigned char **out, ssize_t req_len)
{
if (req_len < 0)
return read_request_eof(fd, out);
else
return read_request_fixed_len(fd, req_len, out);
}
static void inflate_request(const char *prog_name, int out, int buffer_input, ssize_t req_len)
{
2011-06-10 20:52:15 +02:00
git_zstream stream;
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
unsigned char *full_request = NULL;
unsigned char in_buf[8192];
unsigned char out_buf[8192];
unsigned long cnt = 0;
int req_len_defined = req_len >= 0;
size_t req_remaining_len = req_len;
memset(&stream, 0, sizeof(stream));
git_inflate_init_gzip_only(&stream);
while (1) {
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
ssize_t n;
if (buffer_input) {
if (full_request)
n = 0; /* nothing left to read */
else
n = read_request(0, &full_request, req_len);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
stream.next_in = full_request;
} else {
ssize_t buffer_len;
if (req_len_defined && req_remaining_len <= sizeof(in_buf))
buffer_len = req_remaining_len;
else
buffer_len = sizeof(in_buf);
n = xread(0, in_buf, buffer_len);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
stream.next_in = in_buf;
if (req_len_defined && n > 0)
req_remaining_len -= n;
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
}
if (n <= 0)
die("request ended in the middle of the gzip stream");
stream.avail_in = n;
while (0 < stream.avail_in) {
int ret;
stream.next_out = out_buf;
stream.avail_out = sizeof(out_buf);
ret = git_inflate(&stream, Z_NO_FLUSH);
if (ret != Z_OK && ret != Z_STREAM_END)
die("zlib error inflating request, result %d", ret);
n = stream.total_out - cnt;
write_to_child(out, out_buf, stream.total_out - cnt, prog_name);
cnt = stream.total_out;
if (ret == Z_STREAM_END)
goto done;
}
}
done:
git_inflate_end(&stream);
close(out);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
free(full_request);
}
static void copy_request(const char *prog_name, int out, ssize_t req_len)
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
{
unsigned char *buf;
ssize_t n = read_request(0, &buf, req_len);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
if (n < 0)
die_errno("error reading request body");
write_to_child(out, buf, n, prog_name);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
close(out);
free(buf);
}
static void pipe_fixed_length(const char *prog_name, int out, size_t req_len)
{
unsigned char buf[8192];
size_t remaining_len = req_len;
while (remaining_len > 0) {
size_t chunk_length = remaining_len > sizeof(buf) ? sizeof(buf) : remaining_len;
ssize_t n = xread(0, buf, chunk_length);
if (n < 0)
die_errno("Reading request failed");
write_to_child(out, buf, n, prog_name);
remaining_len -= n;
}
close(out);
}
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
static void run_service(const char **argv, int buffer_input)
{
const char *encoding = getenv("HTTP_CONTENT_ENCODING");
const char *user = getenv("REMOTE_USER");
const char *host = getenv("REMOTE_ADDR");
int gzipped_request = 0;
struct child_process cld = CHILD_PROCESS_INIT;
ssize_t req_len = get_content_length();
if (encoding && !strcmp(encoding, "gzip"))
gzipped_request = 1;
else if (encoding && !strcmp(encoding, "x-gzip"))
gzipped_request = 1;
if (!user || !*user)
user = "anonymous";
if (!host || !*host)
host = "(none)";
if (!getenv("GIT_COMMITTER_NAME"))
argv_array_pushf(&cld.env_array, "GIT_COMMITTER_NAME=%s", user);
if (!getenv("GIT_COMMITTER_EMAIL"))
argv_array_pushf(&cld.env_array,
"GIT_COMMITTER_EMAIL=%s@http.%s", user, host);
cld.argv = argv;
if (buffer_input || gzipped_request || req_len >= 0)
cld.in = -1;
cld.git_cmd = 1;
cld.clean_on_exit = 1;
cld.wait_after_clean = 1;
if (start_command(&cld))
exit(1);
close(1);
if (gzipped_request)
inflate_request(argv[0], cld.in, buffer_input, req_len);
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
else if (buffer_input)
copy_request(argv[0], cld.in, req_len);
else if (req_len >= 0)
pipe_fixed_length(argv[0], cld.in, req_len);
else
close(0);
if (finish_command(&cld))
exit(1);
}
static int show_text_ref(const char *name, const struct object_id *oid,
int flag, void *cb_data)
{
const char *name_nons = strip_namespace(name);
struct strbuf *buf = cb_data;
struct object *o = parse_object(the_repository, oid);
if (!o)
return 0;
strbuf_addf(buf, "%s\t%s\n", oid_to_hex(oid), name_nons);
if (o->type == OBJ_TAG) {
o = deref_tag(the_repository, o, name, 0);
if (!o)
return 0;
strbuf_addf(buf, "%s\t%s^{}\n", oid_to_hex(&o->oid),
name_nons);
}
return 0;
}
static void get_info_refs(struct strbuf *hdr, char *arg)
{
const char *service_name = get_parameter("service");
struct strbuf buf = STRBUF_INIT;
hdr_nocache(hdr);
if (service_name) {
const char *argv[] = {NULL /* service name */,
"--stateless-rpc", "--advertise-refs",
".", NULL};
struct rpc_service *svc = select_service(hdr, service_name);
strbuf_addf(&buf, "application/x-git-%s-advertisement",
svc->name);
hdr_str(hdr, content_type, buf.buf);
end_headers(hdr);
if (determine_protocol_version_server() != protocol_v2) {
packet_write_fmt(1, "# service=git-%s\n", svc->name);
packet_flush(1);
}
argv[0] = svc->name;
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
run_service(argv, 0);
} else {
select_getanyfile(hdr);
for_each_namespaced_ref(show_text_ref, &buf);
send_strbuf(hdr, "text/plain", &buf);
}
strbuf_release(&buf);
}
static int show_head_ref(const char *refname, const struct object_id *oid,
int flag, void *cb_data)
{
struct strbuf *buf = cb_data;
if (flag & REF_ISSYMREF) {
const char *target = resolve_ref_unsafe(refname,
RESOLVE_REF_READING,
NULL, NULL);
if (target)
strbuf_addf(buf, "ref: %s\n", strip_namespace(target));
} else {
strbuf_addf(buf, "%s\n", oid_to_hex(oid));
}
return 0;
}
static void get_head(struct strbuf *hdr, char *arg)
{
struct strbuf buf = STRBUF_INIT;
select_getanyfile(hdr);
head_ref_namespaced(show_head_ref, &buf);
send_strbuf(hdr, "text/plain", &buf);
strbuf_release(&buf);
}
static void get_info_packs(struct strbuf *hdr, char *arg)
{
size_t objdirlen = strlen(get_object_directory());
struct strbuf buf = STRBUF_INIT;
struct packed_git *p;
size_t cnt = 0;
select_getanyfile(hdr);
for (p = get_all_packs(the_repository); p; p = p->next) {
if (p->pack_local)
cnt++;
}
strbuf_grow(&buf, cnt * 53 + 2);
for (p = get_all_packs(the_repository); p; p = p->next) {
if (p->pack_local)
strbuf_addf(&buf, "P %s\n", p->pack_name + objdirlen + 6);
}
strbuf_addch(&buf, '\n');
hdr_nocache(hdr);
send_strbuf(hdr, "text/plain; charset=utf-8", &buf);
strbuf_release(&buf);
}
static void check_content_type(struct strbuf *hdr, const char *accepted_type)
{
const char *actual_type = getenv("CONTENT_TYPE");
if (!actual_type)
actual_type = "";
if (strcmp(actual_type, accepted_type)) {
http_status(hdr, 415, "Unsupported Media Type");
hdr_nocache(hdr);
end_headers(hdr);
format_write(1,
"Expected POST with Content-Type '%s',"
" but received '%s' instead.\n",
accepted_type, actual_type);
exit(0);
}
}
static void service_rpc(struct strbuf *hdr, char *service_name)
{
const char *argv[] = {NULL, "--stateless-rpc", ".", NULL};
struct rpc_service *svc = select_service(hdr, service_name);
struct strbuf buf = STRBUF_INIT;
strbuf_reset(&buf);
strbuf_addf(&buf, "application/x-git-%s-request", svc->name);
check_content_type(hdr, buf.buf);
hdr_nocache(hdr);
strbuf_reset(&buf);
strbuf_addf(&buf, "application/x-git-%s-result", svc->name);
hdr_str(hdr, content_type, buf.buf);
end_headers(hdr);
argv[0] = svc->name;
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
run_service(argv, svc->buffer_input);
strbuf_release(&buf);
}
2015-05-15 08:29:27 +02:00
static int dead;
static NORETURN void die_webcgi(const char *err, va_list params)
{
2015-05-15 08:29:27 +02:00
if (dead <= 1) {
struct strbuf hdr = STRBUF_INIT;
2015-05-15 08:29:27 +02:00
vreportf("fatal: ", err, params);
http_status(&hdr, 500, "Internal Server Error");
hdr_nocache(&hdr);
end_headers(&hdr);
}
exit(0); /* we successfully reported a failure ;-) */
}
2015-05-15 08:29:27 +02:00
static int die_webcgi_recursing(void)
{
return dead++ > 1;
}
static char* getdir(void)
{
struct strbuf buf = STRBUF_INIT;
char *pathinfo = getenv("PATH_INFO");
char *root = getenv("GIT_PROJECT_ROOT");
char *path = getenv("PATH_TRANSLATED");
if (root && *root) {
if (!pathinfo || !*pathinfo)
die("GIT_PROJECT_ROOT is set but PATH_INFO is not");
if (daemon_avoid_alias(pathinfo))
die("'%s': aliased", pathinfo);
end_url_with_slash(&buf, root);
if (pathinfo[0] == '/')
pathinfo++;
strbuf_addstr(&buf, pathinfo);
return strbuf_detach(&buf, NULL);
} else if (path && *path) {
return xstrdup(path);
} else
die("No GIT_PROJECT_ROOT or PATH_TRANSLATED from server");
return NULL;
}
static struct service_cmd {
const char *method;
const char *pattern;
void (*imp)(struct strbuf *, char *);
} services[] = {
{"GET", "/HEAD$", get_head},
{"GET", "/info/refs$", get_info_refs},
{"GET", "/objects/info/alternates$", get_text_file},
{"GET", "/objects/info/http-alternates$", get_text_file},
{"GET", "/objects/info/packs$", get_info_packs},
{"GET", "/objects/[0-9a-f]{2}/[0-9a-f]{38}$", get_loose_object},
{"GET", "/objects/[0-9a-f]{2}/[0-9a-f]{62}$", get_loose_object},
{"GET", "/objects/pack/pack-[0-9a-f]{40}\\.pack$", get_pack_file},
{"GET", "/objects/pack/pack-[0-9a-f]{64}\\.pack$", get_pack_file},
{"GET", "/objects/pack/pack-[0-9a-f]{40}\\.idx$", get_idx_file},
{"GET", "/objects/pack/pack-[0-9a-f]{64}\\.idx$", get_idx_file},
{"POST", "/git-upload-pack$", service_rpc},
{"POST", "/git-receive-pack$", service_rpc}
};
static int bad_request(struct strbuf *hdr, const struct service_cmd *c)
{
const char *proto = getenv("SERVER_PROTOCOL");
if (proto && !strcmp(proto, "HTTP/1.1")) {
http_status(hdr, 405, "Method Not Allowed");
hdr_str(hdr, "Allow",
!strcmp(c->method, "GET") ? "GET, HEAD" : c->method);
} else
http_status(hdr, 400, "Bad Request");
hdr_nocache(hdr);
end_headers(hdr);
return 0;
}
add an extra level of indirection to main() There are certain startup tasks that we expect every git process to do. In some cases this is just to improve the quality of the program (e.g., setting up gettext()). In others it is a requirement for using certain functions in libgit.a (e.g., system_path() expects that you have called git_extract_argv0_path()). Most commands are builtins and are covered by the git.c version of main(). However, there are still a few external commands that use their own main(). Each of these has to remember to include the correct startup sequence, and we are not always consistent. Rather than just fix the inconsistencies, let's make this harder to get wrong by providing a common main() that can run this standard startup. We basically have two options to do this: - the compat/mingw.h file already does something like this by adding a #define that replaces the definition of main with a wrapper that calls mingw_startup(). The upside is that the code in each program doesn't need to be changed at all; it's rewritten on the fly by the preprocessor. The downside is that it may make debugging of the startup sequence a bit more confusing, as the preprocessor is quietly inserting new code. - the builtin functions are all of the form cmd_foo(), and git.c's main() calls them. This is much more explicit, which may make things more obvious to somebody reading the code. It's also more flexible (because of course we have to figure out _which_ cmd_foo() to call). The downside is that each of the builtins must define cmd_foo(), instead of just main(). This patch chooses the latter option, preferring the more explicit approach, even though it is more invasive. We introduce a new file common-main.c, with the "real" main. It expects to call cmd_main() from whatever other objects it is linked against. We link common-main.o against anything that links against libgit.a, since we know that such programs will need to do this setup. Note that common-main.o can't actually go inside libgit.a, as the linker would not pick up its main() function automatically (it has no callers). The rest of the patch is just adjusting all of the various external programs (mostly in t/helper) to use cmd_main(). I've provided a global declaration for cmd_main(), which means that all of the programs also need to match its signature. In particular, many functions need to switch to "const char **" instead of "char **" for argv. This effect ripples out to a few other variables and functions, as well. This makes the patch even more invasive, but the end result is much better. We should be treating argv strings as const anyway, and now all programs conform to the same signature (which also matches the way builtins are defined). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-01 07:58:58 +02:00
int cmd_main(int argc, const char **argv)
{
char *method = getenv("REQUEST_METHOD");
char *dir;
struct service_cmd *cmd = NULL;
char *cmd_arg = NULL;
int i;
struct strbuf hdr = STRBUF_INIT;
set_die_routine(die_webcgi);
2015-05-15 08:29:27 +02:00
set_die_is_recursing_routine(die_webcgi_recursing);
if (!method)
die("No REQUEST_METHOD from server");
if (!strcmp(method, "HEAD"))
method = "GET";
dir = getdir();
for (i = 0; i < ARRAY_SIZE(services); i++) {
struct service_cmd *c = &services[i];
regex_t re;
regmatch_t out[1];
if (regcomp(&re, c->pattern, REG_EXTENDED))
die("Bogus regex in service table: %s", c->pattern);
if (!regexec(&re, dir, 1, out, 0)) {
size_t n;
if (strcmp(method, c->method))
return bad_request(&hdr, c);
cmd = c;
n = out[0].rm_eo - out[0].rm_so;
cmd_arg = xmemdupz(dir + out[0].rm_so + 1, n - 1);
dir[out[0].rm_so] = 0;
break;
}
regfree(&re);
}
if (!cmd)
not_found(&hdr, "Request not supported: '%s'", dir);
setup_path();
if (!enter_repo(dir, 0))
not_found(&hdr, "Not a git repository: '%s'", dir);
if (!getenv("GIT_HTTP_EXPORT_ALL") &&
access("git-daemon-export-ok", F_OK) )
not_found(&hdr, "Repository not exported: '%s'", dir);
http_config();
http-backend: spool ref negotiation requests to buffer When http-backend spawns "upload-pack" to do ref negotiation, it streams the http request body to upload-pack, who then streams the http response back to the client as it reads. In theory, git can go full-duplex; the client can consume our response while it is still sending the request. In practice, however, HTTP is a half-duplex protocol. Even if our client is ready to read and write simultaneously, we may have other HTTP infrastructure in the way, including the webserver that spawns our CGI, or any intermediate proxies. In at least one documented case[1], this leads to deadlock when trying a fetch over http. What happens is basically: 1. Apache proxies the request to the CGI, http-backend. 2. http-backend gzip-inflates the data and sends the result to upload-pack. 3. upload-pack acts on the data and generates output over the pipe back to Apache. Apache isn't reading because it's busy writing (step 1). This works fine most of the time, because the upload-pack output ends up in a system pipe buffer, and Apache reads it as soon as it finishes writing. But if both the request and the response exceed the system pipe buffer size, then we deadlock (Apache blocks writing to http-backend, http-backend blocks writing to upload-pack, and upload-pack blocks writing to Apache). We need to break the deadlock by spooling either the input or the output. In this case, it's ideal to spool the input, because Apache does not start reading either stdout _or_ stderr until we have consumed all of the input. So until we do so, we cannot even get an error message out to the client. The solution is fairly straight-forward: we read the request body into an in-memory buffer in http-backend, freeing up Apache, and then feed the data ourselves to upload-pack. But there are a few important things to note: 1. We limit the in-memory buffer to prevent an obvious denial-of-service attack. This is a new hard limit on requests, but it's unlikely to come into play. The default value is 10MB, which covers even the ridiculous 100,000-ref negotation in the included test (that actually caps out just over 5MB). But it's configurable on the off chance that you don't mind spending some extra memory to make even ridiculous requests work. 2. We must take care only to buffer when we have to. For pushes, the incoming packfile may be of arbitrary size, and we should connect the input directly to receive-pack. There's no deadlock problem here, though, because we do not produce any output until the whole packfile has been read. For upload-pack's initial ref advertisement, we similarly do not need to buffer. Even though we may generate a lot of output, there is no request body at all (i.e., it is a GET, not a POST). [1] http://article.gmane.org/gmane.comp.version-control.git/269020 Test-adapted-from: Dennis Kaarsemaker <dennis@kaarsemaker.net> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2015-05-20 09:37:09 +02:00
max_request_buffer = git_env_ulong("GIT_HTTP_MAX_REQUEST_BUFFER",
max_request_buffer);
cmd->imp(&hdr, cmd_arg);
return 0;
}