diff --git a/HTTP-request-API.md b/HTTP-request-API.md
index e5f6c4f..0b5cafe 100644
--- a/HTTP-request-API.md
+++ b/HTTP-request-API.md
@@ -1,167 +1,3 @@
-WLED's HTTP API allows you to set many properties of your lights, even more than the index page UI supports, via a simple GET web request.
-
-_Unsure how all this API stuff works? Check out [this amazing guide](https://tynick.com/blog/01-28-2020/controlling-wled-with-raspberry-pi-using-the-wled-api/) by tynick!_
-
-**Notice: While this API is not deprecated, it is highly recommended to use the [JSON API](https://github.com/Aircoookie/WLED/wiki/JSON-API) instead of the HTTP API for new integrations, as it is structured in a better way and allows efficient use of newer features like segments, presets, and playlists.**
-
-The basic URL scheme is: `[ipadress]/win`. This will return an XML file with some current values (see bottom of page).
-Parameters can be added to control some of the variables.
-- Example (AP): `192.168.4.1/win&A=255` sets the brightness to maximum
-- Example (mdns): `led.local/win&A=128&FX=0` sets the brightness to half and the effect to Solid
-
-In conjunction with a [router port forwarding](https://github.com/Aircoookie/WLED/wiki/Remote-Access-and-IFTTT) this can be used to automate WLED, for example via IFTTT.
-
-Add one or multiple of the following parameters after the base URL/IP to change values:
-(if the parameter is unknown or the value illegal nothing will happen)
-
-## LED control
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&A= | 0 to 255 | Master brightness | 0.2
-&T= | 0, 1, or 2 | Master Off/On/Toggle | 0.3
-&R= | 0 to 255 | Primary Red value | 0.2
-&G= | 0 to 255 | Primary Green value | 0.2
-&B= | 0 to 255 | Primary Blue value | 0.2
-&W= | 0 to 255 | Primary White value | 0.4
-&FX= | 0 to 101 | LED Effect Index | 0.3
-&SX= | 0 to 255 | Effect Speed | 0.3
-&IX= | 0 to 255 | Effect Intensity | 0.5.0
-&FP= | 0 to 46 | FastLED Palette | 0.8.0
-&NL= | 0 to 255 | Nightlight active and duration in minutes | 0.3
-&ND | none | Toggles nightlight on but uses default duration | 0.6.3
-&NT= | 0 to 255 | Nightlight target brightness | 0.5.0
-&NF= | 0 to 2 | Fade Nightlight, 1 = fade brightness only,
2 = additionaly fade color from primary to secondary color | 0.5.0
-
-## Advanced
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&CL= | HEX/DEC | Primary color | 0.8.0
-&C2= | HEX/DEC | Secondary color | 0.8.0
-&C3= | HEX/DEC | Third color | 0.8.0
-&R2= | 0 to 255 | Secondary Red value | 0.4
-&G2= | 0 to 255 | Secondary Green value | 0.4
-&B2= | 0 to 255 | Secondary Blue value | 0.4
-&W2= | 0 to 255 | Secondary White value | 0.4
-&HU= | 0 to 65535 | Hue | 0.5.1
-&SA= | 0 to 255 | Saturation (only in conjunction with Hue) | 0.5.1
-&H2 | none | Hue + Saturation will set secondary color | 0.5.1
-&SR= | 0 or 1 | Set Primary/Secondary color to random hue | 0.4
-&SC | none | Swap primary and secondary color | 0.4
-
-### Use of hex values
-
-Hex values need to be prefaced with the character h or H. The normal format is `RRGGBB`. If the led strip is RGBW, the hex format is `WWRRGGBB`. Note: In the UI the format is `RRGGBBWW`, so the values cannot be copied without a transformation.
-
-### Loxone commands
-
-Loxone offers two commands. One for RGB values and one for brightness and color temperature.
-
-| Parameter | Syntax | Range | Description | Since Version |
-|---|---|---|---|---|
-&LX= | BBBGGGRRR | 0 - 100100100 | Loxone RGB value for primary color. Each color (`RRR`,`GGG`,`BBB`) is specified in the range from 0 to 100%. | 0.11
-&LX= | 20bbbtttt | 200002700 - 201006500 | Loxone brightness and color temperature values for primary color. Brightness `bbb` is specified in the range 0 to 100%. `tttt` defines the color temperature in the range from 2700 to 6500 Kelvin. | 0.11
-&LY= | BBBGGGRRR | 0 - 100100100 | Loxone RGB value for secondary color. Each color (`RRR`,`GGG`,`BBB`) is specified in the range from 0 to 100%. | 0.11
-&LY= | 20bbbtttt | 200002700 - 201006500 | Loxone brightness and color temperature values for secondary color. Brightness `bbb` is specified in the range 0 to 100%. `tttt` defines the color temperature in the range from 2700 to 6500 Kelvin. | 0.11
-
-## Notifications
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&RN= | 0 or 1 | Receive UDP Notifications | 0.3
-&SN= | 0 or 1 | Send UDP Notifications | 0.3
-&NN | none | No notification for this request | 0.3
-&HP= | 0 to 99 | Sets Hue polling light ID (0 is off) | 0.5.1
-
-## Presets
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&PS= | 1 to 16 | Saves current setup to preset | 0.4
-&PL= | 1 to 250 | Applies entire preset | 0.4
-&P1= | 1 to 249 | First cycle preset | 0.6.3
-&P2= | 2 to 250 | Last cycle preset | 0.6.3
-&TT= | 0 to 65000 | Set transition time (ms) | 0.6.3
-
-## Macros
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&M= | 1 to 16 | Apply macro (deprecated, added for compatibility with pre-0.11 automations) | 0.5.0
-
-## Segments
-It is highly recommended to use the [JSON API](https://github.com/Aircoookie/WLED/wiki/JSON-API) when dealing with Segments.
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&SM= | 0 to 9 | Set the main segment (values are reported to XML) | 0.9.0
-&SS= | 0 to 9 | Select segment to apply THIS api call to | 0.9.0
-&SV= | 0, 1, or 2 | Set segment selected (2 unselects others) | 0.9.0
-&S= | 0 to ledcount-1 | Set segment start | 0.9.0
-&S2= | 0 to ledcount | Set segment stop | 0.9.0
-&GP= | 1 to 255 | Set segment grouping | 0.9.1
-&SP= | 0 to 255 | Set segment spacing | 0.9.1
-&RV= | 0 or 1 | Reverse/Flip Segment direction | 0.9.1
-&SB= | 0 to 255 | Segment brightness | 0.10.0
-
-## General and Experimental
-
-Parameter | Value Range | Description | Since Version
-| --- | --- | --- | --- |
-&RB | none | Reboot WLED | 0.10.0 (?)
-&ST= | 32bit | Current UTC time in Unix epoch | 0.4
-&CT= | 32bit | UTC time for countdown end | 0.4
-&MD= | 0 or 1 | Set slider mode to RGB/HSB | 0.3
-&AX= | 0 to 255 | Debug feature, can be configured for general IO | 0.3
-&IN | none | Server will not respond to this request (internal) | 0.3
-&OL= | 0 to 255 | Experimental overlays | 0.3
-&L= | 0 to 255 | Lock pixel | 0.4
-&L2= | 0 to 255 | Lock pixel range L to L2 | 0.4
-&UL | none | Unlock instead (used in conjunction with L and L2) | 0.4
-&NX= | String 1..6 | Cronixie clockface | 0.4
-&NM= | 0 or 1 | Cronixie Time or Countdown mode | 0.4
-&NB= | 0 or 1 | Cronixie Backlight | 0.4
-&IT | none | Include UI color theme in API response | 0.8.2
-&RD= | 0 or 1 | Toggle realtime UDP | 0.8.4
-&LO= | 0-2 | Live data override. 0 is off, 1 is override until live data ends, 2 is override until ESP reboot | 0.10.2
-
-## XML response
-This is the XML file sent as response to every API call.
-
-Parameter | Value Range | Description
-| --- | --- | --- |
-\ | 0 to 255 | Master Brightness
-\ | 3x 0..255 | Primary Color RGB
-\ | 3x 0..255 | Secondary RGB
-\ | 0 or 1 | Notification Sending on
-\ | 0 or 1 | Notification Receive on
-\ | 0 or 1 | Nightlight active
-\ | 0 or 2 | Nightlight Fade type
-\ | 0 to 255 | Nightlight delay
-\ | 0 to 255 | Nightlight target brightness
-\ | 0 to 73 | Effect index
-\ | 0 to 255 | Effect speed
-\ | 0 to 255 | Effect intensity
-\ | 0 to 43 | FastLED palette
-\ | -1 to 255 | Primary White value
-\ | 0 to 255 | Secondary White
-\ | 0 to 255 | Current Preset
-\ | 0 or 1 | Preset Cycling enabled
-\ | 0 or 1 | RGB or HSB UI mode
-\ | String 0..32 | Server description
-\ | 0 to 12 | Segment ID
-
-## In-/decrementing values
-
-You can use the `~` character to easily set values relative to their current value.
-This is currently supported for the following parameters:
-`A, R, G, B, W, R2, G2, B2, W2, FX, SX, IX, FP, PL`
-
-For example, use `PL=~` to go to the next preset. Using just `~` without a number will increase the value by 1, `~-` will decrease it by 1. The value will then wrap around, so using `A=~-` when A is 0 will set A to 255.
-
-You can also specify by how much to change the value. For example, using `A=~10` will increase the brightness by 10. In case of using a number behind `~`, the value will clip (so it will not wrap around, if the maximum brightness is set, `A=~10` will not have any effect)
-
-To setup a Macro for a Button to advance to the next Preset, use **win&P1=1&P2=30&PL=~**
-P1 will equal the first Preset of the rotation while P2 will be the last Preset.
+Please see https://kno.wled.ge/interfaces/http-api/ for this information.
+This wiki is now deprecated. Please consider contributing to kno.wled.ge by making improvements as a pull request. Thank you!
\ No newline at end of file