diff --git a/How-To-Compile-WLED-.bin-File.md b/How-To-Compile-WLED-.bin-File.md
new file mode 100644
index 0000000..7e6031c
--- /dev/null
+++ b/How-To-Compile-WLED-.bin-File.md
@@ -0,0 +1,65 @@
+A lot of people ask how they can compile their own WLED .bin file, whether it be for a custom pins or analog LEDs, so this picture guide will show how to do it.
+
+First, download the latest source code from https://github.com/Aircoookie/WLED under the `Code` dropdown menu.
+
+![](https://i.ibb.co/2hnGhyb/Screen-Shot-2020-11-03-at-5-25-18-PM.png)
+
+Then download, install and open VSCode (https://code.visualstudio.com/download) and install the PlatformIO IDE extension from the VSCode Settings > Extensions menu.
+
+![](https://i.ibb.co/SNv8TtH/Screen-Shot-2020-11-03-at-6-27-58-PM.png)
+
+After PlatformIO IDE is installed, restart VSCode and open your unzipped WLED source code folder.
+
+![](https://i.ibb.co/pXs1G0j/Screen-Shot-2020-11-03-at-5-27-03-PM.png)
+![](https://i.ibb.co/10ykGxk/Screen-Shot-2020-11-03-at-5-27-17-PM.png)
+
+Now you need to find which GPIO pins go to which color and make these adjustments in your code.
+
+* PWM1 - Red
+* PWM2 - Blue
+* PWM3 - Green
+* PWM4 - White1
+* PWM5 - White2
+
+The best place to find your pins is the Tasmota device repo. https://templates.blakadder.com 
+
+![](https://i.ibb.co/51k3ck2/Screen-Shot-2020-11-03-at-7-43-25-PM.png)
+
+Above you can see which GPIO pin goes to each PWM channel.
+
+Insert this information into the `NpbWrapper.h` file back in VSCode.
+
+![](https://i.ibb.co/tpHgGRx/Screen-Shot-2020-11-03-at-5-30-36-PM.png)
+
+Now you can adjust your build flags in the `platformio.ini` if you want to enable our disable certain things. 
+
+![](https://i.ibb.co/wQKNcwk/Screen-Shot-2020-11-03-at-5-32-20-PM.png)
+
+Now click the PlatformIO logo in the left side bar and find `env:esp8285_4CH_MagicHome` and then click `General` > `Build`
+
+![](https://i.ibb.co/rbB9vLy/Screen-Shot-2020-11-03-at-5-32-57-PM.png)
+![](https://i.ibb.co/30sRrDM/Screen-Shot-2020-11-03-at-5-33-25-PM.png)
+
+It will probably fail the first time. Just click build again.
+
+![](https://i.ibb.co/WGPcNnn/Screen-Shot-2020-11-03-at-5-35-28-PM.png)
+
+It might fail again. Third times a charm.
+
+![](https://i.ibb.co/727JZKx/Screen-Shot-2020-11-03-at-5-35-48-PM.png)
+
+There we go!
+
+![](https://i.ibb.co/QdW361W/Screen-Shot-2020-11-03-at-5-36-18-PM.png)
+
+The .bin file is located in a hidden folder called `.pio` in your WLED folder. Since it's in a hidden folder you have to move it out to use it.
+
+All that's left to do is flash this .bin file onto your esp chip and then connect it to wifi. 
+
+Here's a good video tutorial on how to flash a MagicHome controller like the one pictured above. https://www.youtube.com/watch?v=qgBAU39v07k 
+
+You just need to use the `firmware.bin` instead. 
+
+![](https://i.ibb.co/bdj0WNb/Screen-Shot-2020-11-03-at-5-38-43-PM.png)
+
+I prefer to use ESPHome-Flasher just because that's what I've had the best luck with. https://github.com/esphome/esphome-flasher/releases
\ No newline at end of file