opensourcemirror
/
WLEDwiki
mirror of https://github.com/Aircoookie/WLED.wiki.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

fixed sp501e analog red pin number

This commit is contained in:
tonyn0 2021-02-20 20:34:08 -06:00
parent f915bc0ab8
commit 05d4b0e3ff
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Compatible-hardware.md
View File

@ -38,7 +38,7 @@ NodeMCU-32s | ESP32 | The most common ESP32 development board. Works well, depen
[WT32-ETH01](https://www.aliexpress.com/wholesale?&SearchText=wt32-eth01) | ESP32 | **Under development!** Ethernet (non-PoE) and WiFi enabled alternative to the Olimex boards, for 1/4 the cost. Features no PoE, and requires initial flashing of a custom compiled image using a FTDI or similar USB to serial converter.
[Merkury MI-BW210-999W](https://www.walmart.com/ip/Merkury-Innovations-A21-Smart-Light-Bulb-75W-Color-LED-2-Pack/669037420) | ESP8285 | Tuya Style WiFi Led light bulb, Warm White + RGB. There are two versions of this same bulb sold in the same packaging only way to check is to look at the bulb, EBEQPW92 uses PWM led control and is compatible with WLED however EBEQPW06 uses an SM16716 chip and is not currently compatible with WLED. Managed to flash using tuya-convert and a custom WLED build with the following analog pinout: B:4, G:5, R:13, W:14. Extras disabled to allow OTA, OTA only way to flash this, programming headers are not internally available.
[Adafruit Feather Huzzah](https://learn.adafruit.com/adafruit-feather-huzzah-esp8266) | ESP8266 | General-purpose ESP8266 Board with USB, battery connector, etc.
[SP501e](https://www.amazon.com/RGBZONE-Controller-Compatible-Addressable-WS2812bB/dp/B07S3Z8GSH) | ESP8285 | 8285-based 1M Controller that supports both Addressable and PWM-based RGBWW LED strips . 5-24v DC input, 55mm x 26mm, sold under BTF lighting, RGBZone, etc. Vendors all list 'Fairynest' as the supporting mobile application. Board is silk screened with 'SP5XXe' but no other markings. RS232 pads are exposed on the back-side of the board with GND and GPIO0 right next to each other and thus Flash access fairly straight forward. GPIO 0 must be pulled to GND at boot and throughout the flashing process. I/O configuration: LEDPIN is 'GPIO03' for Addressable, BTNPIN is GPIO 1. PWM pin out for RGBWW (UNTESTED): CW: 14, WW: 12, B: 13, R: 02 and G: GPIO04. Flashed via PlatformIO, ESPHome and Tasmotizer. OTA updates untested. Pics of board here: https://github.com/Operation760/SP501e-RGB-LED-Controller-/blob/master/SP501e_top_bottom_traced.jpg Flashing Connections: https://github.com/tonyn0/sp501e-flashing/blob/main/sp501e%20flash.png
[SP501e](https://www.amazon.com/RGBZONE-Controller-Compatible-Addressable-WS2812bB/dp/B07S3Z8GSH) | ESP8285 | 8285-based 1M Controller that supports both Addressable and PWM-based RGBWW LED strips . 5-24v DC input, 55mm x 26mm, sold under BTF lighting, RGBZone, etc. Vendors all list 'Fairynest' as the supporting mobile application. Board is silk screened with 'SP5XXe' but no other markings. RS232 pads are exposed on the back-side of the board with GND and GPIO0 right next to each other and thus Flash access fairly straight forward. GPIO 0 must be pulled to GND at boot and throughout the flashing process. I/O configuration: LEDPIN is 'GPIO03' for Addressable, BTNPIN is GPIO 1. PWM pin out for RGBWW: CW: 14, WW: 12, B: 13, R: 15 and G: GPIO04. Flashed via PlatformIO, ESPHome and Tasmotizer. Pics of board here: https://github.com/Operation760/SP501e-RGB-LED-Controller-/blob/master/SP501e_top_bottom_traced.jpg Flashing Connections: https://github.com/tonyn0/sp501e-flashing/blob/main/sp501e%20flash.png
[SP108e v2](https://www.amazon.de/dp/B07KW1W68R) | ESP8285 | Hardware-Modification required and different versions exists! 8285-based 2M Controller that supports addressable RGBWW LED strips, also with CLK line (like ATA102). 5-24v DC input, 85mm x 45mm x 23mm. Vendors list spledapps 'Led Shop' as the supporting mobile application. Board is silk screened with 'SP108e'. No pads are exposed and a second processor is used to control the LEDs. Pin7 of that processor needs to be grounded to hold it in reset state. Then you can connect GPIO0 to GND and TX, RX, VCC, GND for flashing. Connect GPIO2 to R4 for DATA out and GPIO13 to R3 for CLK out. Flashed via PlatformIO, esptool. OTA updates work. Pics of pinout here: https://github.com/psxde/sp108e-led-controller/raw/main/sp108ev2_inside.png
[RE5V1C](https://www.itead.cc/sonoff-re5v1c.html) | ESP8285 | 5v DC input - onboard 10A relay
## Useful boards and addons