opensourcemirror
/
WLED
mirror of https://github.com/Aircoookie/WLED.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
WLED/wled00/user_config_override_sample.h

551 lines
24 KiB
C++
Raw Blame History

// force the compiler to show a warning to confirm that this file is included
#warning **** user_config_override.h: Using Settings from this File ****
/* Uncomment and use your WIFI settings
#define CLIENT_SSID "Your_SSID"
#define CLIENT_PASS "Your_Password"
*/
// ESP8266-01 (blue) got too little storage space to work with all features of WLED. To use it, you must use ESP8266 Arduino Core v2.4.2 and the setting 512K(No SPIFFS).
// ESP8266-01 (black) has 1MB flash and can thus fit the whole program. Use 1M(64K SPIFFS).
// Uncomment some of the following lines to disable features to compile for ESP8266-01 (max flash size 434kB):
// Alternatively, with platformio pass your chosen flags to your custom build target in platformio.ini.override
// You are required to disable over-the-air updates:
//#define WLED_DISABLE_OTA // saves 14kb
// You need to choose some of these features to disable:
//#define WLED_DISABLE_ALEXA // saves 11kb
//#define WLED_DISABLE_BLYNK // saves 6kb
//#define WLED_DISABLE_CRONIXIE // saves 3kb
//#define WLED_DISABLE_HUESYNC // saves 4kb
//#define WLED_DISABLE_INFRARED // there is no pin left for this on ESP8266-01, saves 12kb
#ifndef WLED_DISABLE_MQTT
#define WLED_ENABLE_MQTT // saves 12kb
#endif
#define WLED_ENABLE_ADALIGHT // saves 500b only
//#define WLED_ENABLE_DMX // uses 3.5kb (use LEDPIN other than 2)
#define WLED_ENABLE_LOXONE // uses 1.2kb
#ifndef WLED_DISABLE_WEBSOCKETS
#define WLED_ENABLE_WEBSOCKETS
#endif
#define WLED_DISABLE_FILESYSTEM // SPIFFS is not used by any WLED feature yet
//#define WLED_ENABLE_FS_SERVING // Enable sending html file from SPIFFS before serving progmem version
//#define WLED_ENABLE_FS_EDITOR // enable /edit page for editing SPIFFS content. Will also be disabled with OTA lock
// to toggle usb serial debug (un)comment the following line
//#define WLED_DEBUG
// Library inclusions.
#include <Arduino.h>
#ifdef ESP8266
#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ESPAsyncTCP.h>
extern "C"
{
#include <user_interface.h>
}
#else // ESP32
#include <WiFi.h>
#include "esp_wifi.h"
#include <ESPmDNS.h>
#include <AsyncTCP.h>
#include "SPIFFS.h"
#endif
#include <ESPAsyncWebServer.h>
#include <EEPROM.h>
#include <WiFiUdp.h>
#include <DNSServer.h>
#ifndef WLED_DISABLE_OTA
#include <ArduinoOTA.h>
#endif
#include <SPIFFSEditor.h>
#include "src/dependencies/time/TimeLib.h"
#include "src/dependencies/timezone/Timezone.h"
#ifndef WLED_DISABLE_ALEXA
#define ESPALEXA_ASYNC
#define ESPALEXA_NO_SUBPAGE
#define ESPALEXA_MAXDEVICES 1
// #define ESPALEXA_DEBUG
#include "src/dependencies/espalexa/Espalexa.h"
#endif
#ifndef WLED_DISABLE_BLYNK
#include "src/dependencies/blynk/BlynkSimpleEsp.h"
#endif
#ifdef WLED_ENABLE_DMX
#include "src/dependencies/dmx/ESPDMX.h"
#endif
#include "src/dependencies/e131/ESPAsyncE131.h"
#include "src/dependencies/async-mqtt-client/AsyncMqttClient.h"
#define ARDUINOJSON_DECODE_UNICODE 0
#include "src/dependencies/json/AsyncJson-v6.h"
#include "src/dependencies/json/ArduinoJson-v6.h"
#include "fcn_declare.h"
#include "html_ui.h"
#include "html_settings.h"
#include "html_other.h"
#include "FX.h"
#include "ir_codes.h"
#include "const.h"
#ifndef CLIENT_SSID
#define CLIENT_SSID DEFAULT_CLIENT_SSID
#endif
#ifndef CLIENT_PASS
#define CLIENT_PASS ""
#endif
#if IR_PIN < 0
#ifndef WLED_DISABLE_INFRARED
#define WLED_DISABLE_INFRARED
#endif
#endif
#ifndef WLED_DISABLE_INFRARED
#include <IRremoteESP8266.h>
#include <IRrecv.h>
#include <IRutils.h>
#endif
// remove flicker because PWM signal of RGB channels can become out of phase (part of core as of Arduino core v2.7.0)
//#if defined(WLED_USE_ANALOG_LEDS) && defined(ESP8266)
// #include "src/dependencies/arduino/core_esp8266_waveform.h"
//#endif
// enable additional debug output
#ifdef WLED_DEBUG
#ifndef ESP8266
#include <rom/rtc.h>
#endif
#define DEBUG_PRINT(x) Serial.print(x)
#define DEBUG_PRINTLN(x) Serial.println(x)
#define DEBUG_PRINTF(x) Serial.printf(x)
#else
#define DEBUG_PRINT(x)
#define DEBUG_PRINTLN(x)
#define DEBUG_PRINTF(x)
#endif
// GLOBAL VARIABLES
// both declared and defined in header (solution from http://www.keil.com/support/docs/1868.htm)
//
//e.g. byte test = 2 becomes WLED_GLOBAL byte test _INIT(2);
// int arr[]{0,1,2} becomes WLED_GLOBAL int arr[] _INIT_N(({0,1,2}));
#ifndef WLED_DEFINE_GLOBAL_VARS
# define WLED_GLOBAL extern
# define _INIT(x)
# define _INIT_N(x)
#else
# define WLED_GLOBAL
# define _INIT(x) = x
//needed to ignore commas in array definitions
#define UNPACK( ... ) __VA_ARGS__
# define _INIT_N(x) UNPACK x
#endif
// Global Variable definitions
WLED_GLOBAL char versionString[] _INIT("0.10.2");
#define WLED_CODENAME "Fumikiri"
// AP and OTA default passwords (for maximum security change them!)
WLED_GLOBAL char apPass[65] _INIT(DEFAULT_AP_PASS);
WLED_GLOBAL char otaPass[33] _INIT(DEFAULT_OTA_PASS);
// Hardware CONFIG (only changeble HERE, not at runtime)
// LED strip pin, button pin and IR pin changeable in NpbWrapper.h!
WLED_GLOBAL byte auxDefaultState _INIT(0); // 0: input 1: high 2: low
WLED_GLOBAL byte auxTriggeredState _INIT(0); // 0: input 1: high 2: low
WLED_GLOBAL char ntpServerName[33] _INIT("0.wled.pool.ntp.org"); // NTP server to use
// WiFi CONFIG (all these can be changed via web UI, no need to set them here)
WLED_GLOBAL char clientSSID[33] _INIT(CLIENT_SSID);
WLED_GLOBAL char clientPass[65] _INIT(CLIENT_PASS);
WLED_GLOBAL char cmDNS[33] _INIT("x"); // mDNS address (placeholder, is replaced by wledXXXXXX.local)
WLED_GLOBAL char apSSID[33] _INIT(""); // AP off by default (unless setup)
WLED_GLOBAL byte apChannel _INIT(1); // 2.4GHz WiFi AP channel (1-13)
WLED_GLOBAL byte apHide _INIT(0); // hidden AP SSID
WLED_GLOBAL byte apBehavior _INIT(AP_BEHAVIOR_BOOT_NO_CONN); // access point opens when no connection after boot by default
WLED_GLOBAL IPAddress staticIP _INIT_N((( 0, 0, 0, 0))); // static IP of ESP
WLED_GLOBAL IPAddress staticGateway _INIT_N((( 0, 0, 0, 0))); // gateway (router) IP
WLED_GLOBAL IPAddress staticSubnet _INIT_N(((255, 255, 255, 0))); // most common subnet in home networks
WLED_GLOBAL bool noWifiSleep _INIT(false); // disabling modem sleep modes will increase heat output and power usage, but may help with connection issues
// LED CONFIG
WLED_GLOBAL uint16_t ledCount _INIT(30); // overcurrent prevented by ABL
WLED_GLOBAL bool useRGBW _INIT(false); // SK6812 strips can contain an extra White channel
WLED_GLOBAL bool turnOnAtBoot _INIT(true); // turn on LEDs at power-up
WLED_GLOBAL byte bootPreset _INIT(0); // save preset to load after power-up
WLED_GLOBAL byte col[] _INIT_N(({ 255, 160, 0, 0 })); // current RGB(W) primary color. col[] should be updated if you want to change the color.
WLED_GLOBAL byte colSec[] _INIT_N(({ 0, 0, 0, 0 })); // current RGB(W) secondary color
WLED_GLOBAL byte briS _INIT(128); // default brightness
WLED_GLOBAL byte nightlightTargetBri _INIT(0); // brightness after nightlight is over
WLED_GLOBAL byte nightlightDelayMins _INIT(60);
WLED_GLOBAL byte nightlightMode _INIT(NL_MODE_FADE); // See const.h for available modes. Was nightlightFade
WLED_GLOBAL bool fadeTransition _INIT(true); // enable crossfading color transition
WLED_GLOBAL uint16_t transitionDelay _INIT(750); // default crossfade duration in ms
WLED_GLOBAL bool skipFirstLed _INIT(false); // ignore first LED in strip (useful if you need the LED as signal repeater)
WLED_GLOBAL byte briMultiplier _INIT(100); // % of brightness to set (to limit power, if you set it to 50 and set bri to 255, actual brightness will be 127)
// User Interface CONFIG
WLED_GLOBAL char serverDescription[33] _INIT("WLED"); // Name of module
WLED_GLOBAL bool syncToggleReceive _INIT(false); // UIs which only have a single button for sync should toggle send+receive if this is true, only send otherwise
// Sync CONFIG
WLED_GLOBAL bool buttonEnabled _INIT(true);
WLED_GLOBAL byte irEnabled _INIT(0); // Infrared receiver
WLED_GLOBAL uint16_t udpPort _INIT(21324); // WLED notifier default port
WLED_GLOBAL uint16_t udpPort2 _INIT(65506); // WLED notifier supplemental port
WLED_GLOBAL uint16_t udpRgbPort _INIT(19446); // Hyperion port
WLED_GLOBAL bool receiveNotificationBrightness _INIT(true); // apply brightness from incoming notifications
WLED_GLOBAL bool receiveNotificationColor _INIT(true); // apply color
WLED_GLOBAL bool receiveNotificationEffects _INIT(true); // apply effects setup
WLED_GLOBAL bool notifyDirect _INIT(false); // send notification if change via UI or HTTP API
WLED_GLOBAL bool notifyButton _INIT(false); // send if updated by button or infrared remote
WLED_GLOBAL bool notifyAlexa _INIT(false); // send notification if updated via Alexa
WLED_GLOBAL bool notifyMacro _INIT(false); // send notification for macro
WLED_GLOBAL bool notifyHue _INIT(true); // send notification if Hue light changes
WLED_GLOBAL bool notifyTwice _INIT(false); // notifications use UDP: enable if devices don't sync reliably
WLED_GLOBAL bool alexaEnabled _INIT(false); // enable device discovery by Amazon Echo
WLED_GLOBAL char alexaInvocationName[33] _INIT("Light"); // speech control name of device. Choose something voice-to-text can understand
WLED_GLOBAL char blynkApiKey[36] _INIT(""); // Auth token for Blynk server. If empty, no connection will be made
WLED_GLOBAL uint16_t realtimeTimeoutMs _INIT(2500); // ms timeout of realtime mode before returning to normal mode
WLED_GLOBAL int arlsOffset _INIT(0); // realtime LED offset
WLED_GLOBAL bool receiveDirect _INIT(true); // receive UDP realtime
WLED_GLOBAL bool arlsDisableGammaCorrection _INIT(true); // activate if gamma correction is handled by the source
WLED_GLOBAL bool arlsForceMaxBri _INIT(false); // enable to force max brightness if source has very dark colors that would be black
#ifdef WLED_ENABLE_DMX
WLED_GLOBAL DMXESPSerial dmx;
WLED_GLOBAL uint16_t e131ProxyUniverse _INIT(0); // output this E1.31 (sACN) / ArtNet universe via MAX485 (0 = disabled)
#endif
WLED_GLOBAL uint16_t e131Universe _INIT(1); // settings for E1.31 (sACN) protocol (only DMX_MODE_MULTIPLE_* can span over consequtive universes)
WLED_GLOBAL uint16_t e131Port _INIT(5568); // DMX in port. E1.31 default is 5568, Art-Net is 6454
WLED_GLOBAL byte DMXMode _INIT(DMX_MODE_MULTIPLE_RGB); // DMX mode (s.a.)
WLED_GLOBAL uint16_t DMXAddress _INIT(1); // DMX start address of fixture, a.k.a. first Channel [for E1.31 (sACN) protocol]
WLED_GLOBAL byte DMXOldDimmer _INIT(0); // only update brightness on change
WLED_GLOBAL byte e131LastSequenceNumber[E131_MAX_UNIVERSE_COUNT]; // to detect packet loss
WLED_GLOBAL bool e131Multicast _INIT(false); // multicast or unicast
WLED_GLOBAL bool e131SkipOutOfSequence _INIT(false); // freeze instead of flickering
WLED_GLOBAL bool mqttEnabled _INIT(true);
WLED_GLOBAL char mqttDeviceTopic[33] _INIT(""); // main MQTT topic (individual per device, default is wled/mac)
WLED_GLOBAL char mqttGroupTopic[33] _INIT("wled/all"); // second MQTT topic (for example to group devices)
WLED_GLOBAL char mqttServer[33] _INIT("your_broker.ip"); // both domains and IPs should work (no SSL)
WLED_GLOBAL char mqttUser[41] _INIT("your_mqtt_user"); // optional: username for MQTT auth
WLED_GLOBAL char mqttPass[41] _INIT("your_mqtt_pwd"); // optional: password for MQTT auth
WLED_GLOBAL char mqttClientID[41] _INIT(""); // override the client ID
WLED_GLOBAL uint16_t mqttPort _INIT(1883);
WLED_GLOBAL bool huePollingEnabled _INIT(false); // poll hue bridge for light state
WLED_GLOBAL uint16_t huePollIntervalMs _INIT(2500); // low values (< 1sec) may cause lag but offer quicker response
WLED_GLOBAL char hueApiKey[47] _INIT("api"); // key token will be obtained from bridge
WLED_GLOBAL byte huePollLightId _INIT(1); // ID of hue lamp to sync to. Find the ID in the hue app ("about" section)
WLED_GLOBAL IPAddress hueIP _INIT((0, 0, 0, 0)); // IP address of the bridge
WLED_GLOBAL bool hueApplyOnOff _INIT(true);
WLED_GLOBAL bool hueApplyBri _INIT(true);
WLED_GLOBAL bool hueApplyColor _INIT(true);
// Time CONFIG
WLED_GLOBAL bool ntpEnabled _INIT(true); // get internet time. Only required if you use clock overlays or time-activated macros
WLED_GLOBAL bool useAMPM _INIT(false); // 12h/24h clock format
WLED_GLOBAL byte currentTimezone _INIT(2); // Timezone ID. Refer to timezones array in wled10_ntp.ino
WLED_GLOBAL int utcOffsetSecs _INIT(0); // Seconds to offset from UTC before timzone calculation
WLED_GLOBAL byte overlayDefault _INIT(0); // 0: no overlay 1: analog clock 2: single-digit clocl 3: cronixie
WLED_GLOBAL byte overlayMin _INIT(0), overlayMax _INIT(ledCount - 1); // boundaries of overlay mode
WLED_GLOBAL byte analogClock12pixel _INIT(0); // The pixel in your strip where "midnight" would be
WLED_GLOBAL bool analogClockSecondsTrail _INIT(false); // Display seconds as trail of LEDs instead of a single pixel
WLED_GLOBAL bool analogClock5MinuteMarks _INIT(false); // Light pixels at every 5-minute position
WLED_GLOBAL char cronixieDisplay[7] _INIT("HHMMSS"); // Cronixie Display mask. See wled13_cronixie.ino
WLED_GLOBAL bool cronixieBacklight _INIT(true); // Allow digits to be back-illuminated
WLED_GLOBAL bool countdownMode _INIT(false); // Clock will count down towards date
WLED_GLOBAL byte countdownYear _INIT(20), countdownMonth _INIT(1); // Countdown target date, year is last two digits
WLED_GLOBAL byte countdownDay _INIT(1) , countdownHour _INIT(0);
WLED_GLOBAL byte countdownMin _INIT(0) , countdownSec _INIT(0);
WLED_GLOBAL byte macroBoot _INIT(0); // macro loaded after startup
WLED_GLOBAL byte macroNl _INIT(0); // after nightlight delay over
WLED_GLOBAL byte macroCountdown _INIT(0);
WLED_GLOBAL byte macroAlexaOn _INIT(0), macroAlexaOff _INIT(0);
WLED_GLOBAL byte macroButton _INIT(0), macroLongPress _INIT(0), macroDoublePress _INIT(0);
// Security CONFIG
WLED_GLOBAL bool otaLock _INIT(false); // prevents OTA firmware updates without password. ALWAYS enable if system exposed to any public networks
WLED_GLOBAL bool wifiLock _INIT(false); // prevents access to WiFi settings when OTA lock is enabled
WLED_GLOBAL bool aOtaEnabled _INIT(false); // ArduinoOTA allows easy updates directly from the IDE. Careful, it does not auto-disable when OTA lock is on
WLED_GLOBAL uint16_t userVar0 _INIT(0), userVar1 _INIT(0); //available for use in usermod
#ifdef WLED_ENABLE_DMX
// dmx CONFIG
WLED_GLOBAL byte DMXChannels _INIT(7); // number of channels per fixture
WLED_GLOBAL byte DMXFixtureMap[15] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }));
// assigns the different channels to different functions. See wled21_dmx.ino for more information.
WLED_GLOBAL uint16_t DMXGap _INIT(10); // gap between the fixtures. makes addressing easier because you don't have to memorize odd numbers when climbing up onto a rig.
WLED_GLOBAL uint16_t DMXStart _INIT(10); // start address of the first fixture
WLED_GLOBAL uint16_t DMXStartLED _INIT(0); // LED from which DMX fixtures start
#endif
// internal global variable declarations
// wifi
WLED_GLOBAL bool apActive _INIT(false);
WLED_GLOBAL bool forceReconnect _INIT(false);
WLED_GLOBAL uint32_t lastReconnectAttempt _INIT(0);
WLED_GLOBAL bool interfacesInited _INIT(false);
WLED_GLOBAL bool wasConnected _INIT(false);
// color
WLED_GLOBAL byte colOld[] _INIT_N(({ 0, 0, 0, 0 })); // color before transition
WLED_GLOBAL byte colT[] _INIT_N(({ 0, 0, 0, 0 })); // color that is currently displayed on the LEDs
WLED_GLOBAL byte colIT[] _INIT_N(({ 0, 0, 0, 0 })); // color that was last sent to LEDs
WLED_GLOBAL byte colSecT[] _INIT_N(({ 0, 0, 0, 0 }));
WLED_GLOBAL byte colSecOld[] _INIT_N(({ 0, 0, 0, 0 }));
WLED_GLOBAL byte colSecIT[] _INIT_N(({ 0, 0, 0, 0 }));
WLED_GLOBAL byte lastRandomIndex _INIT(0); // used to save last random color so the new one is not the same
// transitions
WLED_GLOBAL bool transitionActive _INIT(false);
WLED_GLOBAL uint16_t transitionDelayDefault _INIT(transitionDelay);
WLED_GLOBAL uint16_t transitionDelayTemp _INIT(transitionDelay);
WLED_GLOBAL unsigned long transitionStartTime;
WLED_GLOBAL float tperLast _INIT(0); // crossfade transition progress, 0.0f - 1.0f
WLED_GLOBAL bool jsonTransitionOnce _INIT(false);
// nightlight
WLED_GLOBAL bool nightlightActive _INIT(false);
WLED_GLOBAL bool nightlightActiveOld _INIT(false);
WLED_GLOBAL uint32_t nightlightDelayMs _INIT(10);
WLED_GLOBAL byte nightlightDelayMinsDefault _INIT(nightlightDelayMins);
WLED_GLOBAL unsigned long nightlightStartTime;
WLED_GLOBAL byte briNlT _INIT(0); // current nightlight brightness
WLED_GLOBAL byte colNlT[] _INIT_N(({ 0, 0, 0, 0 })); // current nightlight color
// brightness
WLED_GLOBAL unsigned long lastOnTime _INIT(0);
WLED_GLOBAL bool offMode _INIT(!turnOnAtBoot);
WLED_GLOBAL byte bri _INIT(briS);
WLED_GLOBAL byte briOld _INIT(0);
WLED_GLOBAL byte briT _INIT(0);
WLED_GLOBAL byte briIT _INIT(0);
WLED_GLOBAL byte briLast _INIT(128); // brightness before turned off. Used for toggle function
WLED_GLOBAL byte whiteLast _INIT(128); // white channel before turned off. Used for toggle function
// button
WLED_GLOBAL bool buttonPressedBefore _INIT(false);
WLED_GLOBAL bool buttonLongPressed _INIT(false);
WLED_GLOBAL unsigned long buttonPressedTime _INIT(0);
WLED_GLOBAL unsigned long buttonWaitTime _INIT(0);
// notifications
WLED_GLOBAL bool notifyDirectDefault _INIT(notifyDirect);
WLED_GLOBAL bool receiveNotifications _INIT(true);
WLED_GLOBAL unsigned long notificationSentTime _INIT(0);
WLED_GLOBAL byte notificationSentCallMode _INIT(NOTIFIER_CALL_MODE_INIT);
WLED_GLOBAL bool notificationTwoRequired _INIT(false);
// effects
WLED_GLOBAL byte effectCurrent _INIT(0);
WLED_GLOBAL byte effectSpeed _INIT(128);
WLED_GLOBAL byte effectIntensity _INIT(128);
WLED_GLOBAL byte effectPalette _INIT(0);
// network
WLED_GLOBAL bool udpConnected _INIT(false), udp2Connected _INIT(false), udpRgbConnected _INIT(false);
// ui style
WLED_GLOBAL bool showWelcomePage _INIT(false);
// hue
WLED_GLOBAL byte hueError _INIT(HUE_ERROR_INACTIVE);
// WLED_GLOBAL uint16_t hueFailCount _INIT(0);
WLED_GLOBAL float hueXLast _INIT(0), hueYLast _INIT(0);
WLED_GLOBAL uint16_t hueHueLast _INIT(0), hueCtLast _INIT(0);
WLED_GLOBAL byte hueSatLast _INIT(0), hueBriLast _INIT(0);
WLED_GLOBAL unsigned long hueLastRequestSent _INIT(0);
WLED_GLOBAL bool hueAuthRequired _INIT(false);
WLED_GLOBAL bool hueReceived _INIT(false);
WLED_GLOBAL bool hueStoreAllowed _INIT(false), hueNewKey _INIT(false);
// overlays
WLED_GLOBAL byte overlayCurrent _INIT(overlayDefault);
WLED_GLOBAL byte overlaySpeed _INIT(200);
WLED_GLOBAL unsigned long overlayRefreshMs _INIT(200);
WLED_GLOBAL unsigned long overlayRefreshedTime;
// cronixie
WLED_GLOBAL byte dP[] _INIT_N(({ 0, 0, 0, 0, 0, 0 }));
WLED_GLOBAL bool cronixieInit _INIT(false);
// countdown
WLED_GLOBAL unsigned long countdownTime _INIT(1514764800L);
WLED_GLOBAL bool countdownOverTriggered _INIT(true);
// timer
WLED_GLOBAL byte lastTimerMinute _INIT(0);
WLED_GLOBAL byte timerHours[] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0 }));
WLED_GLOBAL byte timerMinutes[] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0 }));
WLED_GLOBAL byte timerMacro[] _INIT_N(({ 0, 0, 0, 0, 0, 0, 0, 0 }));
WLED_GLOBAL byte timerWeekday[] _INIT_N(({ 255, 255, 255, 255, 255, 255, 255, 255 })); // weekdays to activate on
// bit pattern of arr elem: 0b11111111: sun,sat,fri,thu,wed,tue,mon,validity
// blynk
WLED_GLOBAL bool blynkEnabled _INIT(false);
// preset cycling
WLED_GLOBAL bool presetCyclingEnabled _INIT(false);
WLED_GLOBAL byte presetCycleMin _INIT(1), presetCycleMax _INIT(5);
WLED_GLOBAL uint16_t presetCycleTime _INIT(12);
WLED_GLOBAL unsigned long presetCycledTime _INIT(0);
WLED_GLOBAL byte presetCycCurr _INIT(presetCycleMin);
WLED_GLOBAL bool presetApplyBri _INIT(true);
WLED_GLOBAL bool saveCurrPresetCycConf _INIT(false);
// realtime
WLED_GLOBAL byte realtimeMode _INIT(REALTIME_MODE_INACTIVE);
WLED_GLOBAL byte realtimeOverride _INIT(REALTIME_OVERRIDE_NONE);
WLED_GLOBAL IPAddress realtimeIP _INIT((0, 0, 0, 0));
WLED_GLOBAL unsigned long realtimeTimeout _INIT(0);
WLED_GLOBAL uint8_t tpmPacketCount _INIT(0);
WLED_GLOBAL uint16_t tpmPayloadFrameSize _INIT(0);
// mqtt
WLED_GLOBAL long lastMqttReconnectAttempt _INIT(0);
WLED_GLOBAL long lastInterfaceUpdate _INIT(0);
WLED_GLOBAL byte interfaceUpdateCallMode _INIT(NOTIFIER_CALL_MODE_INIT);
WLED_GLOBAL char mqttStatusTopic[40] _INIT(""); // this must be global because of async handlers
#if AUXPIN >= 0
// auxiliary debug pin
WLED_GLOBAL byte auxTime _INIT(0);
WLED_GLOBAL unsigned long auxStartTime _INIT(0);
WLED_GLOBAL bool auxActive _INIT(false, auxActiveBefore _INIT(false);
#endif
// alexa udp
WLED_GLOBAL String escapedMac;
#ifndef WLED_DISABLE_ALEXA
WLED_GLOBAL Espalexa espalexa;
WLED_GLOBAL EspalexaDevice* espalexaDevice;
#endif
// dns server
WLED_GLOBAL DNSServer dnsServer;
// network time
WLED_GLOBAL bool ntpConnected _INIT(false);
WLED_GLOBAL time_t localTime _INIT(0);
WLED_GLOBAL unsigned long ntpLastSyncTime _INIT(999000000L);
WLED_GLOBAL unsigned long ntpPacketSentTime _INIT(999000000L);
WLED_GLOBAL IPAddress ntpServerIP;
WLED_GLOBAL uint16_t ntpLocalPort _INIT(2390);
WLED_GLOBAL uint16_t rolloverMillis _INIT(0);
// Temp buffer
WLED_GLOBAL char* obuf;
WLED_GLOBAL uint16_t olen _INIT(0);
// presets
WLED_GLOBAL uint16_t savedPresets _INIT(0);
WLED_GLOBAL int8_t currentPreset _INIT(-1);
WLED_GLOBAL bool isPreset _INIT(false);
WLED_GLOBAL byte errorFlag _INIT(0);
WLED_GLOBAL String messageHead, messageSub;
WLED_GLOBAL byte optionType;
WLED_GLOBAL bool doReboot _INIT(false); // flag to initiate reboot from async handlers
WLED_GLOBAL bool doPublishMqtt _INIT(false);
// server library objects
WLED_GLOBAL AsyncWebServer server _INIT_N(((80)));
#ifdef WLED_ENABLE_WEBSOCKETS
WLED_GLOBAL AsyncWebSocket ws _INIT_N((("/ws")));
#endif
WLED_GLOBAL AsyncClient* hueClient _INIT(NULL);
WLED_GLOBAL AsyncMqttClient* mqtt _INIT(NULL);
// udp interface objects
WLED_GLOBAL WiFiUDP notifierUdp, rgbUdp, notifier2Udp;
WLED_GLOBAL WiFiUDP ntpUdp;
WLED_GLOBAL ESPAsyncE131 e131 _INIT_N(((handleE131Packet)));
WLED_GLOBAL bool e131NewData _INIT(false);
// led fx library object
WLED_GLOBAL WS2812FX strip _INIT(WS2812FX());
// Usermod manager
WLED_GLOBAL UsermodManager usermods _INIT(UsermodManager());
// Status LED
#if STATUSLED && STATUSLED != LEDPIN
WLED_GLOBAL unsigned long ledStatusLastMillis _INIT(0);
WLED_GLOBAL unsigned short ledStatusType _INIT(0); // current status type - corresponds to number of blinks per second
WLED_GLOBAL bool ledStatusState _INIT(0); // the current LED state
#endif
// debug macro variable definitions
#ifdef WLED_DEBUG
WLED_GLOBAL unsigned long debugTime _INIT(0);
WLED_GLOBAL int lastWifiState _INIT(3);
WLED_GLOBAL unsigned long wifiStateChangedTime _INIT(0);
WLED_GLOBAL int loops _INIT(0);
#endif
#define WLED_CONNECTED (WiFi.status() == WL_CONNECTED)
#define WLED_WIFI_CONFIGURED (strlen(clientSSID) >= 1 && strcmp(clientSSID, DEFAULT_CLIENT_SSID) != 0)
#define WLED_MQTT_CONNECTED (mqtt != nullptr && mqtt->connected())
// append new c string to temp buffer efficiently
bool oappend(const char* txt);
// append new number to temp buffer efficiently
bool oappendi(int i);
class WLED {
public:
WLED();
static WLED& instance()
{
static WLED instance;
return instance;
}
// boot starts here
void setup();
void loop();
void reset();
void beginStrip();
void handleConnection();
void initAP(bool resetAP = false);
void initConnection();
void initInterfaces();
void handleStatusLED();
};
Reference in New Issue View Git Blame Copy Permalink