Revert changes

KiCad/battery.pro

@@ -1,4 +1,4 @@
-update=Mon 18 May 2020 05:49:16 PM EDT
+update=Sun 04 Oct 2020 04:57:29 PM
 version=1
 last_client=kicad
 [general]
@@ -240,3 +240,13 @@ uViaDrill=0.1
 dPairWidth=0.2
 dPairGap=0.25
 dPairViaGap=0.25
+[schematic_editor]
+version=1
+PageLayoutDescrFile=
+PlotDirectoryName=
+SubpartIdSeparator=0
+SubpartFirstId=65
+NetFmtName=
+SpiceAjustPassiveValues=0
+LabSize=50
+ERC_TestSimilarLabels=1

batteryEmulator.ino

@@ -1,5 +1,6 @@
 #include <Wire.h>
 
+// First 4 chars are cut off
 #define BATTERY_MODEL "LNV-Version 2"
 #define BATTERY_VENDOR "HACKED"
 #define CHARGE_VOLTAGE 12600
@@ -153,8 +154,6 @@ byte reply0x03(byte *buff) {
   return 2;
 }
 
-int state = 0;
-
 byte reply0x21(byte *buff) {
   char *battery_model = BATTERY_MODEL;
 
@@ -512,12 +511,13 @@ byte (* funMap [])(byte*) = {
 };
 
 byte buffGlobal[60];
-int analogPin = A2;
 
 void setup() {
-  pinMode(analogPin, OUTPUT);
   pinMode(PB3, INPUT);
   
+  pinMode(PB4, OUTPUT);
+  digitalWrite(PB4, LOW);
+  
   command = 0;
   
   Wire.begin (0x0B);
@@ -525,64 +525,16 @@ void setup() {
   Wire.onRequest (requestEvent);
 }
 
-int tries = 0;
-byte lastCommand = 0;
-int ignoring = 0;
-unsigned long lastCurrentMillis = 0;
-unsigned long currentMillis = 0;
-
-
 void loop() {
-  currentMillis = millis();
-
-  if (tries > 0) {
-    if (tries % 2 == 0) {
-      delay(2000);
-      pinMode(analogPin, INPUT);
-    } else {
-      delay(2000);
-      pinMode(analogPin, OUTPUT);
-      analogWrite(analogPin, 0);
-    }
-    tries--;
-    if (tries == 0) {
-      ignoring = 1;
-    }
-  }
+  unsigned long currentMillis = millis();
+  
+  delay(1);
 }
 
-// int counter = 0;
-
 void receiveEvent (uint8_t howMany)
 {
-  lastCommand = command;
-  // counter += 1;
   command = Wire.read();
   
-  if (command == 0 && lastCommand == 13) {
-    Serial.println(currentMillis - lastCurrentMillis);
-    
-    if ((currentMillis - lastCurrentMillis) < 70) {
-      // Serial.println("Irregular");
-      tries = 5;
-    }
-
-    lastCurrentMillis = currentMillis;
-  }
-  
-  if (command == 0 && tries == 0 && lastCommand == 60 && ignoring == 0) {
-    tries = 5;
-    // Serial.println("starting retries");
-  }
-  
-  if (command == 0 && tries == 0 && ignoring == 1) {
-    ignoring = 0;
-    // Serial.println("ignoring off");
-  }
-
-  /*if (command == 13 && lastCommand == 12) {
-    Serial.println();
-  }*/
 
   for (int x = 0; x < howMany-1; x++) {
     byte a = Wire.read();