1431 lines
56 KiB
Plaintext
1431 lines
56 KiB
Plaintext
|
|
IbmFaultMgmt-MIB DEFINITIONS ::= BEGIN
|
|
|
|
IMPORTS
|
|
enterprises, Counter
|
|
FROM RFC1155-SMI
|
|
DisplayString
|
|
FROM RFC1213-MIB
|
|
OBJECT-TYPE
|
|
FROM RFC-1212;
|
|
|
|
-- High-level nodes under enterprises
|
|
ibm OBJECT IDENTIFIER ::= { enterprises 2 }
|
|
ibmArchitecture OBJECT IDENTIFIER ::= { ibm 5 }
|
|
alert OBJECT IDENTIFIER ::= { ibmArchitecture 1 }
|
|
|
|
-- This MIB defines fault management objects to be transported in an IBM
|
|
-- enterprise specific trap. The objects are compatible with IBM SNA
|
|
-- Management Services Generic Alert architecture. References to
|
|
-- subvectors and subfields are provided to facilitate mapping to the
|
|
-- architecture if desired. For additional information on IBM SNA
|
|
-- Management Services, refer to "IBM SNA Formats" (GA27-3136), and "IBM
|
|
-- SNA/Management Services Reference (SC30-3346).
|
|
--
|
|
-- Traps containing these objects have been designed to enable a
|
|
-- management station receiving such a trap to provide a network operator
|
|
-- with a notification of the problem or impending problem, the problem
|
|
-- type, description and probable cause, and recommended action for
|
|
-- problem resolution. The design also facilitates the conversion of the
|
|
-- trap to an SNA Alert that can be forwarded to a SNA focal point. It
|
|
-- should be noted that much of the fault management data is transported
|
|
-- in the form of code points that correspond to strings of text stored
|
|
-- at the trap reciever and Alert receiver.
|
|
|
|
-- Groups in Fault Management MIB
|
|
product-Set-ID OBJECT IDENTIFIER ::= { alert 3 } -- x10 subvector
|
|
supporting-Data-Correl OBJECT IDENTIFIER ::= { alert 7 } -- x48 subvector
|
|
generic-Alert-Data OBJECT IDENTIFIER ::= { alert 11 } -- x92 subvector
|
|
probable-Causes OBJECT IDENTIFIER ::= { alert 12 } -- x93 subvector
|
|
user-Causes OBJECT IDENTIFIER ::= { alert 13 } -- x94 subvector
|
|
install-Causes OBJECT IDENTIFIER ::= { alert 14 } -- x95 subvector
|
|
failure-Causes OBJECT IDENTIFIER ::= { alert 15 } -- x96 subvector
|
|
detailed-Data-SV OBJECT IDENTIFIER ::= { alert 17 } -- x98 subvector
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- The product-Set-ID group { alert 3 } (X'10' MS Common Subvector)
|
|
--
|
|
-- This group is always present in a trap to describe the product
|
|
-- encountering the condition being reported.
|
|
--
|
|
-----------------------------------------------------------------------
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- hwProductInstallSpecificInfoTable (X'11' MS Common Subvector)
|
|
------------------------------------------------------------------------
|
|
hwProductInstallSpecificInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF HwProductEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table containing information to identify hardware or
|
|
microcode products. One or more entries in this table
|
|
will be present in a trap."
|
|
::= { product-Set-ID 1 }
|
|
|
|
hwProductEntry OBJECT-TYPE
|
|
SYNTAX HwProductEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required to identify a single hardware product.
|
|
The index is the product being reported. The first entry
|
|
identifies the product sending the trap. A second entry will be
|
|
present in those traps reporting a condition in a product other
|
|
than the trap sender."
|
|
::= { hwProductInstallSpecificInfoTable 1 }
|
|
|
|
HwProductEntry ::=
|
|
SEQUENCE {
|
|
productClassificationHW INTEGER,
|
|
formatType INTEGER,
|
|
machineType DisplayString,
|
|
modelNum DisplayString,
|
|
plantOfManufacture DisplayString,
|
|
seqNum DisplayString,
|
|
microcodeECLevel DisplayString,
|
|
hardwareProdCommonName DisplayString,
|
|
vendorIDhw DisplayString
|
|
}
|
|
productClassificationHW OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hwIBM(1), -- (X'1') IBM hardware
|
|
hwIBM-NonIBM(3), -- (X'3') IBM or non-IBM hardware
|
|
-- (not distinguished)
|
|
hwNonIBM(9) -- (X'9') non-IBM hardware
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code identifying the general classification of a product."
|
|
::= { hwProductEntry 1 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- Hardware Product ID (X'00' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
formatType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
form11(17) -- (X'11') prod. instance identified by plant of mfg.
|
|
-- and sequence # (unique by machine type and model #)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code identifying the format type of a product instance."
|
|
::= { hwProductEntry 2 }
|
|
|
|
machineType OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (4)) -- numeric characters only
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The machine type."
|
|
::= { hwProductEntry 3 }
|
|
|
|
modelNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (3))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Machine model number."
|
|
::= { hwProductEntry 4 }
|
|
|
|
plantOfManufacture OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (2))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Plant of manufacture."
|
|
::= { hwProductEntry 5 }
|
|
|
|
seqNum OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (7))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Sequence number: right justified, with ASCII 0's fill on left."
|
|
::= { hwProductEntry 6}
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- microcodeECLevel (X'0B' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
microcodeECLevel OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..8))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The Engineering Change (EC) level of the failing microcode
|
|
component. This object is included in a trap only when the
|
|
reported problem is most probably caused by a microcode failure.
|
|
|
|
This object continues to exist in the MIB even at times when it
|
|
is not included in a trap, but a get will result in the object
|
|
being returned with a length of 0."
|
|
::= { hwProductEntry 7 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- hardwareProdCommonName (X'0E' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
hardwareProdCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..15))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name commonly used to identify the product."
|
|
::= { hwProductEntry 8 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- vendorIDhw (X'0F' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
vendorIDhw OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name of the product vendor. This object is included in a
|
|
trap only when the productClassificationHW object is set to
|
|
'hwNonIBM' or 'hwIBM-NonIBM'.
|
|
|
|
This object continues to exist in the MIB even at times when it
|
|
is not included in a trap, but a get will result in the object
|
|
being returned with a length of 0."
|
|
::= { hwProductEntry 9 }
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- swProductInstallSpecificInfoTable (X'11' MS Common Subvector)
|
|
------------------------------------------------------------------------
|
|
swProductInstallSpecificInfoTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF SwProductEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table containing information to identify software products.
|
|
This table is present in a trap when the condition being reported
|
|
is in a software product or set of software products."
|
|
::= { product-Set-ID 2 }
|
|
|
|
swProductEntry OBJECT-TYPE
|
|
SYNTAX SwProductEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required to identify a single software product.
|
|
The index is the instnce of product being identified."
|
|
::= { swProductInstallSpecificInfoTable 1 }
|
|
|
|
SwProductEntry ::=
|
|
SEQUENCE {
|
|
productClassificationSW INTEGER (0..15),
|
|
commonVerID DisplayString (SIZE (0..2)),
|
|
commonRelID DisplayString (SIZE (0..2)),
|
|
commonModID DisplayString (SIZE (0..2)),
|
|
softwareProdCommonName DisplayString (SIZE (1..30)),
|
|
softwareProdProgNmbr DisplayString (SIZE (0..7)),
|
|
vendorIDsw DisplayString (SIZE (1..16))
|
|
}
|
|
|
|
productClassificationSW OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
swIBM(4), -- (X'4') IBM software
|
|
swNonIBM(12), -- (X'C') non-IBM software
|
|
swIBM-NonIBM(14) -- (X'E') IBM or non-IBM software
|
|
-- (not distinguished)
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code identifying the general classification of a product."
|
|
::= { swProductEntry 1 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- Software Product Common Level (X'04' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
commonVerID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..2)) -- Numeric characters only
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Common version ID: right justified, with ASCII 0 fill on left."
|
|
::= { swProductEntry 2 }
|
|
|
|
commonRelID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..2)) -- Numeric characters only
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Common release ID: right justified, with ASCII 0 fill on left."
|
|
::= { swProductEntry 3 }
|
|
|
|
commonModID OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..2)) -- Numeric characters only
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Common modification ID: right justified, with ASCII 0 fill on
|
|
left."
|
|
::= { swProductEntry 4 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- softwareProdCommonName (X'06' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
softwareProdCommonName OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (1..30))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name commonly used to identify the product."
|
|
::= { swProductEntry 5 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- softwareProdProgNmbr (X'08' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
softwareProdProgNmbr OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..7))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The program product number as assigned by distribution personnel,
|
|
or a substitute value supplied by a user-written software
|
|
program."
|
|
::= { swProductEntry 6 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- vendorIDsw (X'0F' Product ID Subfield)
|
|
------------------------------------------------------------------------
|
|
vendorIDsw OBJECT-TYPE
|
|
SYNTAX DisplayString (SIZE (0..16))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The name of the product vendor. This object is included in a
|
|
trap only when the productClassificationSW object is set to
|
|
'swNonIBM' or 'swIBM-NonIBM'.
|
|
|
|
This object continues to exist in the MIB even at times when it
|
|
is not included in a trap, but a get will result in the object
|
|
being returned with a length of 0."
|
|
::= { swProductEntry 7 }
|
|
|
|
|
|
------------------------------------------------------------------------
|
|
-- The supporting-Data-Correl group { alert 7 } (X'48' MS Common Subvector)
|
|
-- This group is present in a trap when additional data is available
|
|
-- that relates to the problem being reported.
|
|
------------------------------------------------------------------------
|
|
--
|
|
--
|
|
------------------------------------------------------------------------
|
|
-- detailedDataSD (X'85' Supporting Data Correlation Subfield)
|
|
------------------------------------------------------------------------
|
|
detailedDataSDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DetailedDataSDEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of information correlation data."
|
|
::= { supporting-Data-Correl 2 }
|
|
|
|
detailedDataSDEntry OBJECT-TYPE
|
|
SYNTAX DetailedDataSDEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required by the trap receiver to
|
|
correlate/retrieve additional data. All objects in this entry
|
|
will be provided. The index is the instance/number of the
|
|
correlator. Multiple entries will be provided when multiple sets
|
|
of data are available."
|
|
::= { detailedDataSDTable 1 }
|
|
|
|
DetailedDataSDEntry ::=
|
|
SEQUENCE {
|
|
productIDCodeSD INTEGER,
|
|
dataIDCodeSD INTEGER,
|
|
dataEncodingSD INTEGER,
|
|
dataSD OCTET STRING
|
|
}
|
|
|
|
productIDCodeSD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayNone(0), -- X'00'
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating what product identification, if any is
|
|
to displayed in conjunction with the data-type and data.
|
|
|
|
displayNone - Do not display any product identification
|
|
data in conjunction with the data-type and
|
|
data.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { detailedDataSDEntry 1 }
|
|
|
|
dataIDCodeSD OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Detailed Data Code Point (Data ID code point)
|
|
(described in IBM document GA27-3136) indicating the type of data
|
|
provided. The English text associated with each code point or
|
|
its national language equivalent is displayed with the
|
|
correlation data."
|
|
::= { detailedDataSDEntry 2 }
|
|
|
|
dataEncodingSD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(0), -- (X'00') encoded/displayed as hexadecimal digits
|
|
binary(1), -- (X'01') encoded as an unsigned integer value, the
|
|
-- decimal equivalent is displayed
|
|
ascii(17) -- (X'11') data is to be decoded as ASCII characters
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating how the accompanying correlation data is
|
|
encoded, and thus how it is to be decoded and displayed."
|
|
::= { detailedDataSDEntry 3 }
|
|
|
|
dataSD OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..44))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Correlation data encoded as specified by the dataEncodingSD
|
|
object."
|
|
::= { detailedDataSDEntry 4}
|
|
|
|
------------------------------------------------------------------------
|
|
-- The generic-Alert-Data group { alert 11 } (X'92' Alert MS Subvector)
|
|
--
|
|
-- This group is always provided in a trap to describe the problem being
|
|
-- reported.
|
|
------------------------------------------------------------------------
|
|
flags OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This object is always set to the value 0. It may be used
|
|
in the future to further indicate why/when the trap was
|
|
sent."
|
|
::= { generic-Alert-Data 1 }
|
|
|
|
alertType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
perm(1), -- (X'01') permanent loss of availability
|
|
temp(2), -- (X'02') temporary loss of availability
|
|
perf(3), -- (X'03') performance is below an acceptable level
|
|
pend(17), -- (X'11') impending loss of availability
|
|
unkn(18) -- (X'12') the severity of the problem is not known
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A code indicating the severity of the condition being reported."
|
|
::= { generic-Alert-Data 2 }
|
|
|
|
alertDescriptionCode OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An Alert Description Code Point (described in IBM document
|
|
GA27-3136) denoting the problem being reported."
|
|
::= { generic-Alert-Data 3 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- The probable-Causes group { alert 12 } (X'93' Alert MS Subvector)
|
|
--
|
|
-- This group is always present in a trap to provide the probable
|
|
-- cause(s) of the condition being reported.
|
|
------------------------------------------------------------------------
|
|
probableCausesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ProbableCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A table of probable cause data."
|
|
::= { probable-Causes 1 }
|
|
|
|
probableCausesEntry OBJECT-TYPE
|
|
SYNTAX ProbableCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An entry of probable cause data. The index is the
|
|
number/instance of the probable cause."
|
|
::= { probableCausesTable 1 }
|
|
|
|
ProbableCausesEntry ::= SEQUENCE { probableCause INTEGER }
|
|
|
|
probableCause OBJECT-TYPE
|
|
SYNTAX INTEGER
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A Probable Cause Code Point (described in IBM document
|
|
GA27-3136) denoting the probable cause of the reported problem.
|
|
From one to four instances of this object (in order of decreasing
|
|
probability) are provided in a trap."
|
|
::= { probableCausesEntry 1 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- The user-Causes group { alert 13 } (X'94' Alert MS Subvector)
|
|
--
|
|
-- This group provides data detailing the probable user causes of the
|
|
-- problem and the recommended actions to be taken in connection with
|
|
-- these causes. It may also provide additional detailed data to be
|
|
-- inserted into the text indexed by the user cause and/or recommended
|
|
-- action code points.
|
|
--
|
|
-- This group is present in a trap if it possible that the problem could
|
|
-- have been caused by a user/customer.
|
|
------------------------------------------------------------------------
|
|
--
|
|
--
|
|
------------------------------------------------------------------------
|
|
-- userCause (X'01' User Causes Subfield)
|
|
------------------------------------------------------------------------
|
|
userCausesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF UserCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of user cause data."
|
|
::= { user-Causes 1 }
|
|
|
|
userCausesEntry OBJECT-TYPE
|
|
SYNTAX UserCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of user cause data. The index is the number/instance
|
|
of the user cause."
|
|
::= { userCausesTable 1}
|
|
|
|
UserCausesEntry ::= SEQUENCE { userCause INTEGER }
|
|
|
|
userCause OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A User Cause Code Point (described in IBM document GA27-3136)
|
|
denoting the probable user cause of the reported problem. From
|
|
From 0 to 4 instances of this object (in order of decreasing
|
|
probability) are provided in a trap."
|
|
::= { userCausesEntry 1}
|
|
|
|
------------------------------------------------------------------------
|
|
-- recommendedActionsUC (X'81' Network Alert Common Subfield)
|
|
------------------------------------------------------------------------
|
|
recommendedActionsUCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RecommendedActionsUCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of recommended action data."
|
|
::= { user-Causes 2 }
|
|
|
|
recommendedActionsUCEntry OBJECT-TYPE
|
|
SYNTAX RecommendedActionsUCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of recommended action data. The index is the
|
|
number/instance of the recommended action."
|
|
::= { recommendedActionsUCTable 1}
|
|
|
|
RecommendedActionsUCEntry ::= SEQUENCE { recommendedActionUC INTEGER }
|
|
|
|
recommendedActionUC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Recommended Action Code Point (described in IBM document
|
|
GA27-3136) denoting the recommended action to take to resolve the
|
|
problem. From 0 to 4 instances of this object (in order of
|
|
decreasing probability) are provided in a trap. If an instance
|
|
of the userCause object is present, at least one instance of this
|
|
object will be present."
|
|
::= { recommendedActionsUCEntry 1 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- detailedDataUC (X'85' Network Alert Common Subfield)
|
|
--
|
|
-- This subgroup is provided in a trap whenever detailed data is to be
|
|
-- inserted into the text indexed by the user cause and/or recommended
|
|
-- action code points.
|
|
------------------------------------------------------------------------
|
|
detailedDataUCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DetailedDataUCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of data to be inserted into the text indexed by
|
|
the user cause and/or recommended action code points."
|
|
::= { user-Causes 3 }
|
|
|
|
detailedDataUCEntry OBJECT-TYPE
|
|
SYNTAX DetailedDataUCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required to display product identification, data
|
|
type, and detailed data. The index is the instance/number of the
|
|
detailed data. The following rules are used for providing
|
|
entries:
|
|
|
|
* An entry is provided for each instance of the userCause object
|
|
and/or recommendedActionUC object containing a codepoint whose
|
|
third character is 'A' or 'B'.
|
|
|
|
* Two entries are provided for each instance of the userCause
|
|
object and/or recommendedActionUC object containing a codepoint
|
|
whose third character is 'C'.
|
|
|
|
* Three entries are provided for each instance of the userCause
|
|
object and/or recommendedActionUC object containing a
|
|
codepoint whose third character is 'D'.
|
|
|
|
Entries are provided in the order of the occurrance of the code
|
|
points requiring them."
|
|
::= { detailedDataUCTable 1 }
|
|
|
|
DetailedDataUCEntry ::=
|
|
SEQUENCE {
|
|
productIDCodeUC INTEGER,
|
|
dataIDCodeUC INTEGER,
|
|
dataEncodingUC INTEGER,
|
|
dataUC OCTET STRING
|
|
}
|
|
|
|
productIDCodeUC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayNone(0), -- X'00'
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating what product identification, if any is
|
|
to displayed in conjunction with the data-type and data.
|
|
|
|
displayNone - Do not display any product identification
|
|
data in conjunction with the data-type and
|
|
data.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { detailedDataUCEntry 1 }
|
|
|
|
dataIDCodeUC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Detailed Data Code Point (Data ID code point)
|
|
(described in IBM document GA27-3136) indicating the type of data
|
|
provided. The English text associated with each code point or
|
|
its national language equivalent is displayed with the
|
|
detailed data."
|
|
::= { detailedDataUCEntry 2 }
|
|
|
|
dataEncodingUC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(0), -- (X'00') encoded/displayed as hexadecimal digits
|
|
binary(1), -- (X'01') encoded as an unsigned integer value, the
|
|
-- decimal equivalent is displayed
|
|
ascii(17) -- (X'11') data is to be decoded as ASCII characters
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating how the accompanying detailed data is
|
|
encoded, and thus how it is to be decoded and displayed."
|
|
::= { detailedDataUCEntry 3 }
|
|
|
|
dataUC OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..44))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Detailed data encoded as specified by the dataEncodingUC
|
|
object."
|
|
::= { detailedDataUCEntry 4}
|
|
|
|
------------------------------------------------------------------------
|
|
-- productSetIDIndexUC (X'83' Network Alert Common Subfield)
|
|
--
|
|
-- This subgroup is provided in a trap whenever product identification
|
|
-- data is to be inserted into the text indexed by the user cause and/or
|
|
-- recommended action code points.
|
|
------------------------------------------------------------------------
|
|
productSetIDIndexUCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ProductSetIDIndexUCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table a describing how product identification data will be
|
|
inserted into the text indexed by the user cause or recommended
|
|
action code points."
|
|
::= { user-Causes 4 }
|
|
|
|
productSetIDIndexUCEntry OBJECT-TYPE
|
|
SYNTAX ProductSetIDIndexUCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An instance of information required to display product
|
|
identification data. The index is the instance of the Product Set
|
|
ID Index. An entry is provided for each instance of the userCause
|
|
object and/or recommendedActionUC object containing a codepoint
|
|
whose third character is 'E'. Entries are provided in the order
|
|
of the occurrance of the code points requiring them."
|
|
::= { productSetIDIndexUCTable 1 }
|
|
|
|
ProductSetIDIndexUCEntry ::= SEQUENCE { productSetIDIndexUC INTEGER }
|
|
|
|
|
|
productSetIDIndexUC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides a code indicating how product
|
|
identification data is to be inserted into the text
|
|
indexed by the user cause and/or recommended action code
|
|
points.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first instance of the machineType
|
|
or hardwareProdCommonName objects.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second instance of the machineType
|
|
or hardwareProdCommonName objects.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { productSetIDIndexUCEntry 1}
|
|
|
|
------------------------------------------------------------------------
|
|
-- The install-Causes group { alert 14 } (X'95' Alert MS Subvector)
|
|
--
|
|
-- This group provides data detailing the probable install causes of the
|
|
-- problem and the recommended actions to be taken in connection with
|
|
-- these causes. It may also provide additional detailed data to be
|
|
-- inserted into the text indexed by the install cause and/or recommended
|
|
-- action code points.
|
|
--
|
|
-- This group is present in a trap if it possible that the problem could
|
|
-- have been caused by an improper installation.
|
|
------------------------------------------------------------------------
|
|
--
|
|
--
|
|
------------------------------------------------------------------------
|
|
-- installCause (X'01' Install Causes Subfield)
|
|
------------------------------------------------------------------------
|
|
installCausesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF InstallCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of install cause data."
|
|
::= { install-Causes 1 }
|
|
|
|
installCausesEntry OBJECT-TYPE
|
|
SYNTAX InstallCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of install cause data. The index is the number/instance
|
|
of the install cause."
|
|
::= { installCausesTable 1}
|
|
|
|
InstallCausesEntry ::= SEQUENCE { installCause INTEGER }
|
|
|
|
installCause OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An Install Cause Code Point (described in IBM document GA27-3136)
|
|
denoting the probable install cause of the reported problem. From
|
|
From 0 to 4 instances of this object (in order of decreasing
|
|
probability) are provided in a trap."
|
|
::= { installCausesEntry 1}
|
|
|
|
------------------------------------------------------------------------
|
|
-- recommendedActionsIC (X'81' Network Alert Common Subfield)
|
|
------------------------------------------------------------------------
|
|
recommendedActionsICTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RecommendedActionsICEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of recommended action data."
|
|
::= { install-Causes 2 }
|
|
|
|
recommendedActionsICEntry OBJECT-TYPE
|
|
SYNTAX RecommendedActionsICEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of recommended action data. The index is the
|
|
number/instance of the recommended action."
|
|
::= { recommendedActionsICTable 1}
|
|
|
|
RecommendedActionsICEntry ::= SEQUENCE { recommendedActionIC INTEGER }
|
|
|
|
recommendedActionIC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Recommended Action Code Point (described in IBM document
|
|
GA27-3136) denoting the recommended action to take to resolve the
|
|
problem. From 0 to 4 instances of this object (in order of
|
|
decreasing probability) are provided in a trap. If an instance
|
|
of the installCause object is present, at least one instance of this
|
|
object will be present."
|
|
::= { recommendedActionsICEntry 1 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- detailedDataIC (X'85' Network Alert Common Subfield)
|
|
--
|
|
-- This subgroup is provided in a trap whenever detailed data is to be
|
|
-- inserted into the text indexed by the install cause and/or recommended
|
|
-- action code points.
|
|
------------------------------------------------------------------------
|
|
detailedDataICTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DetailedDataICEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of data to be inserted into the text indexed by
|
|
the install cause and/or recommended action code points."
|
|
::= { install-Causes 3 }
|
|
|
|
detailedDataICEntry OBJECT-TYPE
|
|
SYNTAX DetailedDataICEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required to display product identification, data
|
|
type, and detailed data. The index is the instance/number of the
|
|
detailed data. The following rules are used for providing
|
|
entries:
|
|
|
|
* An entry is provided for each instance of the installCause object
|
|
and/or recommendedActionIC object containing a codepoint whose
|
|
third character is 'A' or 'B'.
|
|
|
|
* Two entries are provided for each instance of the installCause
|
|
object and/or recommendedActionIC object containing a codepoint
|
|
whose third character is 'C'.
|
|
|
|
* Three entries are provided for each instance of the installCause
|
|
object and/or recommendedActionIC object containing a
|
|
codepoint whose third character is 'D'.
|
|
|
|
Entries are provided in the order of the occurrance of the code
|
|
points requiring them."
|
|
::= { detailedDataICTable 1 }
|
|
|
|
DetailedDataICEntry ::=
|
|
SEQUENCE {
|
|
productIDCodeIC INTEGER,
|
|
dataIDCodeIC INTEGER,
|
|
dataEncodingIC INTEGER,
|
|
dataIC OCTET STRING
|
|
}
|
|
|
|
productIDCodeIC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayNone(0), -- X'00'
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating what product identification, if any is
|
|
to displayed in conjunction with the data-type and data.
|
|
|
|
displayNone - Do not display any product identification
|
|
data in conjunction with the data-type and
|
|
data.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { detailedDataICEntry 1 }
|
|
|
|
dataIDCodeIC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Detailed Data Code Point (Data ID code point)
|
|
(described in IBM document GA27-3136) indicating the type of data
|
|
provided. The English text associated with each code point or
|
|
its national language equivalent is displayed with the
|
|
detailed data."
|
|
::= { detailedDataICEntry 2 }
|
|
|
|
dataEncodingIC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(0), -- (X'00') encoded/displayed as hexadecimal digits
|
|
binary(1), -- (X'01') encoded as an unsigned integer value, the
|
|
-- decimal equivalent is displayed
|
|
ascii(17) -- (X'11') data is to be decoded as ASCII characters
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating how the accompanying detailed data is
|
|
encoded, and thus how it is to be decoded and displayed."
|
|
::= { detailedDataICEntry 3 }
|
|
|
|
dataIC OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..44))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Detailed data encoded as specified by the dataEncodingIC
|
|
object."
|
|
::= { detailedDataICEntry 4}
|
|
|
|
------------------------------------------------------------------------
|
|
-- productSetIDIndexIC (X'83' Network Alert Common Subfield)
|
|
--
|
|
-- This subgroup is provided in a trap whenever product identification
|
|
-- data is to be inserted into the text indexed by the install cause and/or
|
|
-- recommended action code points.
|
|
------------------------------------------------------------------------
|
|
productSetIDIndexICTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ProductSetIDIndexICEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table a describing how product identification data will be
|
|
inserted into the text indexed by the install cause or recommended
|
|
action code points."
|
|
::= { install-Causes 4 }
|
|
|
|
productSetIDIndexICEntry OBJECT-TYPE
|
|
SYNTAX ProductSetIDIndexICEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An instance of information required to display product
|
|
identification data. The index is the instance of the Product Set
|
|
ID Index. An entry is provided for each instance of the installCause
|
|
object and/or recommendedActionIC object containing a codepoint
|
|
whose third character is 'E'. Entries are provided in the order
|
|
of the occurrance of the code points requiring them."
|
|
::= { productSetIDIndexICTable 1 }
|
|
|
|
ProductSetIDIndexICEntry ::= SEQUENCE { productSetIDIndexIC INTEGER }
|
|
|
|
|
|
productSetIDIndexIC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides a code indicating how product
|
|
identification data is to be inserted into the text
|
|
indexed by the install cause and/or recommended action code
|
|
points.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first instance of the machineType
|
|
or hardwareProdCommonName objects.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second instance of the machineType
|
|
or hardwareProdCommonName objects.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { productSetIDIndexICEntry 1}
|
|
|
|
------------------------------------------------------------------------
|
|
-- The failure-Causes group { alert 15 } (X'96' Alert MS Subvector)
|
|
--
|
|
-- This group provides data detailing the probable failure causes of the
|
|
-- problem and the recommended actions to be taken in connection with
|
|
-- these causes. It may also provide additional detailed data to be
|
|
-- inserted into the text indexed by the install cause and/or recommended
|
|
-- action code points.
|
|
--
|
|
-- This group is present in a trap if it possible that the problem could
|
|
-- have been caused by the failure of a hardware or software component.
|
|
------------------------------------------------------------------------
|
|
--
|
|
--
|
|
------------------------------------------------------------------------
|
|
-- failureCause (X'01' Install Causes Subfield)
|
|
------------------------------------------------------------------------
|
|
failureCausesTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF FailureCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of failure cause data."
|
|
::= { failure-Causes 1 }
|
|
|
|
failureCausesEntry OBJECT-TYPE
|
|
SYNTAX FailureCausesEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of failure cause data. The index is the number/instance
|
|
of the failure cause."
|
|
::= { failureCausesTable 1}
|
|
|
|
FailureCausesEntry ::= SEQUENCE { failureCause INTEGER }
|
|
|
|
failureCause OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Failure Cause Code Point (described in IBM document GA27-3136)
|
|
denoting the probable failure cause of the reported problem.
|
|
From 0 to 4 instances of this object (in order of decreasing
|
|
probability) are provided in a trap."
|
|
::= { failureCausesEntry 1}
|
|
|
|
------------------------------------------------------------------------
|
|
-- recommendedActionsFC (X'81' Network Alert Common Subfield)
|
|
------------------------------------------------------------------------
|
|
recommendedActionsFCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF RecommendedActionsFCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of recommended action data."
|
|
::= { failure-Causes 2 }
|
|
|
|
recommendedActionsFCEntry OBJECT-TYPE
|
|
SYNTAX RecommendedActionsFCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An entry of recommended action data. The index is the
|
|
number/instance of the recommended action."
|
|
::= { recommendedActionsFCTable 1}
|
|
|
|
RecommendedActionsFCEntry ::= SEQUENCE { recommendedActionFC INTEGER }
|
|
|
|
recommendedActionFC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Recommended Action Code Point (described in IBM document
|
|
GA27-3136) denoting the recommended action to take to resolve the
|
|
problem. From 0 to 4 instances of this object (in order of
|
|
decreasing probability) are provided in a trap. If an instance
|
|
of the failureCause object is present, at least one instance of this
|
|
object will be present."
|
|
::= { recommendedActionsFCEntry 1 }
|
|
|
|
------------------------------------------------------------------------
|
|
-- detailedDataFC (X'85' Network Alert Common Subfield)
|
|
--
|
|
-- This subgroup is provided in a trap whenever detailed data is to be
|
|
-- inserted into the text indexed by the failure cause and/or recommended
|
|
-- action code points.
|
|
------------------------------------------------------------------------
|
|
detailedDataFCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DetailedDataFCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of data to be inserted into the text indexed by
|
|
the failure cause and/or recommended action code points."
|
|
::= { failure-Causes 3 }
|
|
|
|
detailedDataFCEntry OBJECT-TYPE
|
|
SYNTAX DetailedDataFCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required to display product identification, data
|
|
type, and detailed data. The index is the instance/number of the
|
|
detailed data. The following rules are used for providing
|
|
entries:
|
|
|
|
* An entry is provided for each instance of the failureCause object
|
|
and/or recommendedActionFC object containing a codepoint whose
|
|
third character is 'A' or 'B'.
|
|
|
|
* Two entries are provided for each instance of the failureCause
|
|
object and/or recommendedActionFC object containing a codepoint
|
|
whose third character is 'C'.
|
|
|
|
* Three entries are provided for each instance of the failureCause
|
|
object and/or recommendedActionFC object containing a
|
|
codepoint whose third character is 'D'.
|
|
|
|
Entries are provided in the order of the occurrance of the code
|
|
points requiring them."
|
|
::= { detailedDataFCTable 1 }
|
|
|
|
DetailedDataFCEntry ::=
|
|
SEQUENCE {
|
|
productIDCodeFC INTEGER,
|
|
dataIDCodeFC INTEGER,
|
|
dataEncodingFC INTEGER,
|
|
dataFC OCTET STRING
|
|
}
|
|
|
|
productIDCodeFC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayNone(0), -- X'00'
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating what product identification, if any is
|
|
to displayed in conjunction with the data-type and data.
|
|
|
|
displayNone - Do not display any product identification
|
|
data in conjunction with the data-type and
|
|
data.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { detailedDataFCEntry 1 }
|
|
|
|
dataIDCodeFC OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Detailed Data Code Point (Data ID code point)
|
|
(described in IBM document GA27-3136) indicating the type of data
|
|
provided. The English text associated with each code point or
|
|
its national language equivalent is displayed with the
|
|
detailed data."
|
|
::= { detailedDataFCEntry 2 }
|
|
|
|
dataEncodingFC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(0), -- (X'00') encoded/displayed as hexadecimal digits
|
|
binary(1), -- (X'01') encoded as an unsigned integer value, the
|
|
-- decimal equivalent is displayed
|
|
ascii(17) -- (X'11') data is to be decoded as ASCII characters
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating how the accompanying detailed data is
|
|
encoded, and thus how it is to be decoded and displayed."
|
|
::= { detailedDataFCEntry 3 }
|
|
|
|
dataFC OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..44))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Detailed data encoded as specified by the dataEncodingFC
|
|
object."
|
|
::= { detailedDataFCEntry 4}
|
|
|
|
------------------------------------------------------------------------
|
|
-- productSetIDIndexFC (X'83' Network Alert Common Subfield)
|
|
--
|
|
-- This subgroup is provided in a trap whenever product identification
|
|
-- data is to be inserted into the text indexed by the failure cause and/or
|
|
-- recommended action code points.
|
|
------------------------------------------------------------------------
|
|
productSetIDIndexFCTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF ProductSetIDIndexFCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table a describing how product identification data will be
|
|
inserted into the text indexed by the failure cause or recommended
|
|
action code points."
|
|
::= { failure-Causes 4 }
|
|
|
|
productSetIDIndexFCEntry OBJECT-TYPE
|
|
SYNTAX ProductSetIDIndexFCEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"An instance of information required to display product
|
|
identification data. The index is the instance of the Product Set
|
|
ID Index. An entry is provided for each instance of the failureCause
|
|
object and/or recommendedActionFC object containing a codepoint
|
|
whose third character is 'E'. Entries are provided in the order
|
|
of the occurrance of the code points requiring them."
|
|
::= { productSetIDIndexFCTable 1 }
|
|
|
|
ProductSetIDIndexFCEntry ::= SEQUENCE { productSetIDIndexFC INTEGER }
|
|
|
|
|
|
productSetIDIndexFC OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"This object provides a code indicating how product
|
|
identification data is to be inserted into the text
|
|
indexed by the failure cause and/or recommended action code
|
|
points.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first instance of the machineType
|
|
or hardwareProdCommonName objects.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second instance of the machineType
|
|
or hardwareProdCommonName objects.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { productSetIDIndexFCEntry 1}
|
|
|
|
------------------------------------------------------------------------
|
|
-- The detailed-Data-SV group { alert 17 } (X'98' Alert MS Subvector)
|
|
--
|
|
-- This group is provided in a trap when there is product-specific
|
|
-- detailed data to be reported.
|
|
------------------------------------------------------------------------
|
|
--
|
|
------------------------------------------------------------------------
|
|
-- detailedDataDD (X'85' Network Alert Common Subfield)
|
|
------------------------------------------------------------------------
|
|
detailedDataDDTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF DetailedDataDDEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A table of product-specific detailed data."
|
|
::= { detailed-Data-SV 1 }
|
|
|
|
detailedDataDDEntry OBJECT-TYPE
|
|
SYNTAX DetailedDataDDEntry
|
|
ACCESS not-accessible
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"The information required to display product identification, data
|
|
type, and detailed data. The index is the instance/number of the
|
|
detailed data."
|
|
::= { detailedDataDDTable 1 }
|
|
|
|
DetailedDataDDEntry ::=
|
|
SEQUENCE {
|
|
productIDCodeDD INTEGER,
|
|
dataIDCodeDD INTEGER,
|
|
dataEncodingDD INTEGER,
|
|
dataDD OCTET STRING
|
|
}
|
|
|
|
productIDCodeDD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
displayNone(0), -- X'00'
|
|
displayFirstHW(41), -- X'29'
|
|
displaySecondHW(42), -- X'2A'
|
|
displayFirstSW(153), -- X'99'
|
|
displaySecondSW(154) -- X'9A'
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating what product identification, if any is
|
|
to displayed in conjunction with the data-type and data.
|
|
|
|
displayNone - Do not display any product identification
|
|
data in conjunction with the data-type and
|
|
data.
|
|
|
|
displayFirstHW - display machine type or product common name
|
|
from the first entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displaySecondHW - display machine type or product common name
|
|
from the second entry of the machineType
|
|
or hardwareProdCommonName objects in the
|
|
hwProductInstallSpecificInfoTable.
|
|
|
|
displayFirstSW - display software product common name
|
|
from the first entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable.
|
|
|
|
displaySecondSW - display software product common name
|
|
from the second entry of the
|
|
softwareProdCommonName object in the
|
|
swProductInstallSpecificInfoTable."
|
|
::= { detailedDataDDEntry 1 }
|
|
|
|
dataIDCodeDD OBJECT-TYPE
|
|
SYNTAX INTEGER (0..65535)
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A Detailed Data Code Point (Data ID code point)
|
|
(described in IBM document GA27-3136) indicating the type of data
|
|
provided. The English text associated with each code point or
|
|
its national language equivalent is displayed with the
|
|
detailed data."
|
|
::= { detailedDataDDEntry 2 }
|
|
|
|
dataEncodingDD OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
hex(0), -- (X'00') encoded/displayed as hexadecimal digits
|
|
binary(1), -- (X'01') encoded as an unsigned integer value, the
|
|
-- decimal equivalent is displayed
|
|
ascii(17) -- (X'11') data is to be decoded as ASCII characters
|
|
}
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"A code indicating how the accompanying detailed data is
|
|
encoded, and thus how it is to be decoded and displayed."
|
|
::= { detailedDataDDEntry 3 }
|
|
|
|
dataDD OBJECT-TYPE
|
|
SYNTAX OCTET STRING (SIZE (1..44))
|
|
ACCESS read-only
|
|
STATUS optional
|
|
DESCRIPTION
|
|
"Detailed data encoded as specified by the dataEncodingUC
|
|
object."
|
|
::= { detailedDataDDEntry 4}
|
|
|
|
END
|