1407 lines
41 KiB
Plaintext
1407 lines
41 KiB
Plaintext
-- MIB created 5/06/99 21:05:56, by
|
|
-- SMIC (the next generation) version 1.6.29, November 22, 1994.
|
|
|
|
IBM-ENETDISPATCHER-MIB DEFINITIONS ::= BEGIN
|
|
|
|
-- From file: "ibmenetd.mi2"
|
|
-- Compile options "G A T M"
|
|
|
|
IMPORTS
|
|
Counter32, Gauge32, Integer32, IpAddress, enterprises
|
|
FROM SNMPv2-SMI-v1
|
|
OBJECT-TYPE
|
|
FROM RFC-1212
|
|
TRAP-TYPE
|
|
FROM RFC-1215
|
|
DisplayString, TruthValue
|
|
FROM SNMPv2-TC-v1;
|
|
|
|
dispatcherMib OBJECT IDENTIFIER ::= { enterprises ibm(2) ibmProd(6) ibmENetDispatcher(144) 1 }
|
|
-- MODULE-IDENTITY
|
|
-- LastUpdated
|
|
-- 9808140000Z
|
|
-- OrgName
|
|
-- IBM Internet Software
|
|
-- ContactInfo
|
|
-- Mr. Dana R. Thalheimer
|
|
-- Postal: IBM Networking Software
|
|
-- Dept HLGA/Bldg 502
|
|
-- PO Box 12195
|
|
-- 4205 S. Miami Blvd.
|
|
-- Research Triangle Park, NC 27709
|
|
--
|
|
-- Mr. Chris Gage
|
|
-- Postal: IBM Networking Software
|
|
-- Dept HLGA/Bldg 502
|
|
-- PO Box 12195
|
|
-- 4205 S. Miami Blvd.
|
|
-- Research Triangle Park, NC 27709
|
|
-- Descr
|
|
-- This MIB module contains traps and operational information
|
|
-- for the IBM eNetworkDispatcher.
|
|
-- RevDate
|
|
-- 9711150000Z
|
|
-- RevDescr
|
|
-- The initial revision of this MIB module.
|
|
|
|
dispatcherMibTraps OBJECT IDENTIFIER ::= { dispatcherMib 0 }
|
|
dispatcherMibAdmin OBJECT IDENTIFIER ::= { dispatcherMib 1 }
|
|
dispatcherMibObjects OBJECT IDENTIFIER ::= { dispatcherMib 2 }
|
|
dispatcherMibConformance OBJECT IDENTIFIER ::= { dispatcherMib 3 }
|
|
indStatus OBJECT IDENTIFIER ::= { dispatcherMibObjects 1 }
|
|
indConfig OBJECT IDENTIFIER ::= { dispatcherMibObjects 2 }
|
|
indExecStatObjects OBJECT IDENTIFIER ::= { indStatus 1 }
|
|
indHiAvailStatObjects OBJECT IDENTIFIER ::= { indStatus 6 }
|
|
indExecCnfgObjects OBJECT IDENTIFIER ::= { indConfig 1 }
|
|
indClstrCnfgTable OBJECT IDENTIFIER ::= { indConfig 2 }
|
|
indPortCnfgTable OBJECT IDENTIFIER ::= { indConfig 3 }
|
|
indSrvrCnfgTable OBJECT IDENTIFIER ::= { indConfig 4 }
|
|
indHiAvailCnfgObjects OBJECT IDENTIFIER ::= { indConfig 6 }
|
|
indReachCnfgTable OBJECT IDENTIFIER ::= { indConfig 7 }
|
|
indMngrCnfgObjects OBJECT IDENTIFIER ::= { indConfig 10 }
|
|
indMibCompliances OBJECT IDENTIFIER ::= { dispatcherMibConformance 1 }
|
|
indMibGroups OBJECT IDENTIFIER ::= { dispatcherMibConformance 2 }
|
|
indMibStatGroups OBJECT IDENTIFIER ::= { indMibGroups 1 }
|
|
indMibCnfgGroups OBJECT IDENTIFIER ::= { indMibGroups 2 }
|
|
|
|
Percentages ::= Integer32(0..100)
|
|
-- TEXTUAL-CONVENTION
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- Number from 0 to 100 representing the percentages of
|
|
-- the given object.
|
|
|
|
GaugeNeg1 ::= Integer32(-1..2147483647)
|
|
-- TEXTUAL-CONVENTION
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- Number with Gauge32 behavior, with the additional feature
|
|
-- that the value can go to negative 1.
|
|
|
|
esNonForAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Non forwarding address, any packet sent to this
|
|
address will be handled by the Network Dispatcher
|
|
machine itself and will not be forwarded"
|
|
::= { indExecStatObjects 1 }
|
|
|
|
esVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
-- Rsyntax OCTET STRING(SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version of the executor"
|
|
::= { indExecStatObjects 2 }
|
|
|
|
esNumClust OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
-- Units
|
|
-- clusters
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current number of clusters"
|
|
::= { indExecStatObjects 3 }
|
|
|
|
esTotalPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets received
|
|
by the executor since it started."
|
|
::= { indExecStatObjects 4 }
|
|
|
|
esTooShortPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets discarded by the executor,
|
|
since the executor started, because the packet
|
|
headers were too short."
|
|
::= { indExecStatObjects 5 }
|
|
|
|
esNonForPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets sent to the non forwarding address
|
|
since the executor started."
|
|
::= { indExecStatObjects 6 }
|
|
|
|
esClstrDscrdPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets discarded by the executor
|
|
since the executor started, which were forwarded to
|
|
a cluster, but were discarded because either:
|
|
-the port did not exist, or
|
|
-the port existed but had no servers"
|
|
::= { indExecStatObjects 7 }
|
|
|
|
esClstrErrPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets not sent, since the
|
|
executor started, because of a network adapter
|
|
failure"
|
|
::= { indExecStatObjects 8 }
|
|
|
|
esClstrLocalPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets since the executor started,
|
|
not for the non forwarding address, or any cluster,
|
|
but to be processed locally, by the Network
|
|
Dispatcher machine"
|
|
::= { indExecStatObjects 9 }
|
|
|
|
esClstrOwnAddrPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets since the executor
|
|
started, explicitly forwarded to a server
|
|
located on the Network Dispatcher machine"
|
|
::= { indExecStatObjects 10 }
|
|
|
|
esClstrForPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets since the executor
|
|
started, forwarded to any cluster"
|
|
::= { indExecStatObjects 11 }
|
|
|
|
esForErrPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets with forwarding errors
|
|
since the executor started. The following are
|
|
the scenarios which affect this counter:
|
|
-There was an error extracting an encapsulated
|
|
packet which came in from a wide area Network
|
|
Dispatcher
|
|
-An attempt to forward the packet to either a
|
|
local or remote server failed."
|
|
::= { indExecStatObjects 12 }
|
|
|
|
esNotClstrPkts OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- packets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of packets not addressed to
|
|
any active cluster and port, since the executor
|
|
started"
|
|
::= { indExecStatObjects 13 }
|
|
|
|
esHashBkts OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
-- Units
|
|
-- hash Buckets
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current number of occupied hash buckets. Hash buckets
|
|
correspond to IP address/port pairs. If this number
|
|
is very low, it may indicate that the servers are getting
|
|
many hits from a small number of clients. This number
|
|
gives an indication of the client pool diversity."
|
|
::= { indExecStatObjects 14 }
|
|
|
|
esStartTime OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- seconds
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The time when the executor was started,
|
|
in seconds from January 1, 1970"
|
|
::= { indExecStatObjects 15 }
|
|
|
|
indClstrStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndClstrStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of cluster table entries. The number of entries
|
|
should equal the current number of clusters, esNumClust.
|
|
The cluster table has a row for each cluster, Each row
|
|
has information about the current status of that cluster."
|
|
::= { indStatus 2 }
|
|
|
|
indClstrStatEntry OBJECT-TYPE
|
|
SYNTAX IndClstrStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A cluster table entry describing current status of the cluster.
|
|
The cluster table has a row for each cluster.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { csAddr }
|
|
::= { indClstrStatTable 1 }
|
|
|
|
IndClstrStatEntry ::= SEQUENCE {
|
|
csAddr IpAddress,
|
|
csNumPorts Gauge32,
|
|
csActiveSYNs Counter32,
|
|
csDroppedFINs Counter32,
|
|
csDroppedACKs Counter32,
|
|
csDroppedRSTs Counter32,
|
|
csDroppedPKTs Counter32,
|
|
csNonExistingPKTs Counter32
|
|
}
|
|
|
|
csAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The cluster address in dotted decimal format"
|
|
::= { indClstrStatEntry 1 }
|
|
|
|
csNumPorts OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current number of ports for this cluster"
|
|
::= { indClstrStatEntry 2 }
|
|
|
|
csActiveSYNs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"TH_SYNs on active connection. This variable indicates the
|
|
number of requests for new connections, where those new
|
|
connections are the same as current active connections,
|
|
those not in FIN state.
|
|
|
|
A high rate of growth in this variable could indicate
|
|
slow or no response from servers in this cluster."
|
|
::= { indClstrStatEntry 3 }
|
|
|
|
csDroppedFINs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"FINs dropped due to no connection. Rapid increase in this
|
|
variable could indicate that the staletimeout is too low.
|
|
Any percentage greater than 1% of total packets forwarded
|
|
could indicate a problem."
|
|
::= { indClstrStatEntry 4 }
|
|
|
|
csDroppedACKs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"ACKSs dropped due to no connection. Rapid increase in this
|
|
variable could indicate that the staletimeout is too low.
|
|
Any percentage greater than 1% of total packets forwarded
|
|
could indicate a problem."
|
|
::= { indClstrStatEntry 5 }
|
|
|
|
csDroppedRSTs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"RSTs dropped due to no connection. Rapid increase in this
|
|
variable could indicate that the staletimeout is too low.
|
|
Any percentage greater than 1% of total packets forwarded
|
|
could indicate a problem."
|
|
::= { indClstrStatEntry 6 }
|
|
|
|
csDroppedPKTs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"PKTSs dropped due to no connection. Rapid increase in this
|
|
variable could indicate that the staletimeout is too low.
|
|
Any percentage greater than 1% of total packets forwarded
|
|
could indicate a problem."
|
|
::= { indClstrStatEntry 7 }
|
|
|
|
csNonExistingPKTs OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS deprecated
|
|
DESCRIPTION
|
|
"This variable has no meaning and is deprecated"
|
|
::= { indClstrStatEntry 8 }
|
|
|
|
indPortStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndPortStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of port table entries. The number of entries
|
|
equals the sum of the number of ports for each cluster.
|
|
Each row in the table provides current status information
|
|
for a port."
|
|
::= { indStatus 3 }
|
|
|
|
indPortStatEntry OBJECT-TYPE
|
|
SYNTAX IndPortStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A port entry describing current status of the port. The port
|
|
table has an entry for each cluster, port combination.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { csAddr, psNum }
|
|
::= { indPortStatTable 1 }
|
|
|
|
IndPortStatEntry ::= SEQUENCE {
|
|
psNum Integer32,
|
|
psNumServers Gauge32,
|
|
psNumNodesDown Gauge32
|
|
}
|
|
|
|
psNum OBJECT-TYPE
|
|
SYNTAX Integer32(0..65535)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of this port"
|
|
::= { indPortStatEntry 1 }
|
|
|
|
psNumServers OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current number of servers on this port"
|
|
::= { indPortStatEntry 2 }
|
|
|
|
psNumNodesDown OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of down servers"
|
|
::= { indPortStatEntry 3 }
|
|
|
|
indSrvrStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndSrvrStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of server table entries. The number of entries
|
|
equals the sum of the number of servers for each port.
|
|
Each server table entry provides current status
|
|
information about the port."
|
|
::= { indStatus 4 }
|
|
|
|
indSrvrStatEntry OBJECT-TYPE
|
|
SYNTAX IndSrvrStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A server entry describing current status of the server. There is
|
|
a row in the server table for each cluster, port, server combination.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { csAddr, psNum, ssAddr }
|
|
::= { indSrvrStatTable 1 }
|
|
|
|
IndSrvrStatEntry ::= SEQUENCE {
|
|
ssAddr IpAddress,
|
|
ssActiveConns Gauge32,
|
|
ssNewConns Gauge32,
|
|
ssTotalConns Counter32,
|
|
ssTotalTcpConns Counter32,
|
|
ssTotalUdpConns Counter32,
|
|
ssFinConns Gauge32,
|
|
ssCompleteConns Counter32,
|
|
ssWeight GaugeNeg1,
|
|
ssSavedWeight GaugeNeg1,
|
|
ssPortLoad GaugeNeg1,
|
|
ssSystemLoad Integer32,
|
|
ssActiveConnsWeight Integer32,
|
|
ssNewConnsWeight Integer32,
|
|
ssPortLoadWeight Integer32,
|
|
ssSystemLoadWeight Integer32
|
|
}
|
|
|
|
ssAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Server address in dotted decimal notation"
|
|
::= { indSrvrStatEntry 1 }
|
|
|
|
ssActiveConns OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current active connections for this server"
|
|
::= { indSrvrStatEntry 2 }
|
|
|
|
ssNewConns OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Change in the number of total connections over the
|
|
last interval."
|
|
::= { indSrvrStatEntry 3 }
|
|
|
|
ssTotalConns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total connections for this server, since the server
|
|
was added to the currently running executor"
|
|
::= { indSrvrStatEntry 4 }
|
|
|
|
ssTotalTcpConns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total TCP connections for this server, since the server
|
|
was added to the currently running executor.
|
|
|
|
ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns."
|
|
::= { indSrvrStatEntry 5 }
|
|
|
|
ssTotalUdpConns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total UDP connections for this server, since the server
|
|
was added to the currently running executor.
|
|
|
|
ssTotalTcpConns plus ssTotalUdpConns equals ssTotalConns."
|
|
::= { indSrvrStatEntry 6 }
|
|
|
|
ssFinConns OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current number of connections in FIN state"
|
|
::= { indSrvrStatEntry 7 }
|
|
|
|
ssCompleteConns OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
-- Units
|
|
-- connections
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Total number of completed connections for this server,
|
|
since the server was added to the currently running
|
|
executor."
|
|
::= { indSrvrStatEntry 8 }
|
|
|
|
ssWeight OBJECT-TYPE
|
|
SYNTAX GaugeNeg1
|
|
-- Rsyntax Integer32(-1..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current weight for this server. When the weight is zero the
|
|
executor will no longer forward packets to this server. A
|
|
weight of -1 indicates that the Network Dispatcher administrator
|
|
has explicitly marked the server down."
|
|
::= { indSrvrStatEntry 9 }
|
|
|
|
ssSavedWeight OBJECT-TYPE
|
|
SYNTAX GaugeNeg1
|
|
-- Rsyntax Integer32(-1..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Weight the server had when marked down. This weight will
|
|
be restored when the server is marked up."
|
|
::= { indSrvrStatEntry 10 }
|
|
|
|
ssPortLoad OBJECT-TYPE
|
|
SYNTAX GaugeNeg1
|
|
-- Rsyntax Integer32(-1..2147483647)
|
|
-- Units
|
|
-- milliseconds
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of milliseconds an advisor took to complete a
|
|
protocol specific request to the server. If the value
|
|
is -1, the advisor could not complete the request to
|
|
the server."
|
|
::= { indSrvrStatEntry 11 }
|
|
|
|
ssSystemLoad OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"This value is the number that the ISS agent provides
|
|
to the ISS monitor for this server.
|
|
|
|
The variable is only valid if ISS is monitoring an ISS
|
|
agent on this server. Otherwise, the value has no
|
|
meaning."
|
|
::= { indSrvrStatEntry 12 }
|
|
|
|
ssActiveConnsWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The weight calculated by the manager for the
|
|
active connections measurement"
|
|
::= { indSrvrStatEntry 13 }
|
|
|
|
ssNewConnsWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The weight calculated by the manager for the
|
|
new connections measurement"
|
|
::= { indSrvrStatEntry 14 }
|
|
|
|
ssPortLoadWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The weight calculated by the manager for the
|
|
port load measurement"
|
|
::= { indSrvrStatEntry 15 }
|
|
|
|
ssSystemLoadWeight OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The weight calculated by the manager for the
|
|
system load measurement"
|
|
::= { indSrvrStatEntry 16 }
|
|
|
|
indRulesStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndRulesStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of rule table entries. There is no limit on the number
|
|
of rules. The number of entries is the same as the number of
|
|
entries in the indRulesCnfgTable. Each status entry provides
|
|
current status information about the rule."
|
|
::= { indStatus 5 }
|
|
|
|
indRulesStatEntry OBJECT-TYPE
|
|
SYNTAX IndRulesStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A rule table entry describing the current status of a rule.
|
|
There is a one to one correspondence between rows of this
|
|
table and rows in the IndRulesCnfgTable.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { csAddr, psNum, rcIndex }
|
|
-- Augments indRulesCnfgEntry
|
|
::= { indRulesStatTable 1 }
|
|
|
|
IndRulesStatEntry ::= SEQUENCE {
|
|
rsTimesFired Counter32,
|
|
rsNumSrvrs Gauge32
|
|
}
|
|
|
|
rsTimesFired OBJECT-TYPE
|
|
SYNTAX Counter32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The total number of times this rule has fired"
|
|
::= { indRulesStatEntry 2 }
|
|
|
|
rsNumSrvrs OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The number of servers which this rule services."
|
|
::= { indRulesStatEntry 3 }
|
|
|
|
hasPrimary OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
primary(0),
|
|
backup(1)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Indicates whether this machine is the primary or backup machine.
|
|
-primary (0)
|
|
-backup (1)"
|
|
::= { indHiAvailStatObjects 1 }
|
|
|
|
hasPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Port used by both primary and backup Network Dispatcher machines for
|
|
heartbeat messages."
|
|
::= { indHiAvailStatObjects 2 }
|
|
|
|
hasState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
idle(0),
|
|
listen(1),
|
|
active(2),
|
|
standby(3),
|
|
preempt(4),
|
|
elect(5),
|
|
noExec(6)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Status of this Network Dispatcher machine.
|
|
-idle, (0) this machine is routing packets and is not trying
|
|
to establish contact with its partner Network
|
|
Dispatcher
|
|
-listen, (1) high availability has just started and
|
|
network dispatcher is listening for partner,
|
|
-active, (2) this machine is routing packets.
|
|
-standby,(3) this machine is monitoring the active machine.
|
|
-preempt,(4) transitory state during switch from primary to backup
|
|
-elect, (5) network dispatcher is negotiating with partner
|
|
for who will primary or backup
|
|
-no_exec,(6) the executor is not running"
|
|
::= { indHiAvailStatObjects 3 }
|
|
|
|
hasSubState OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
notSynchronized(0),
|
|
synchronized(1),
|
|
syncIn(2),
|
|
syncOut(3)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"High Availability sub state:
|
|
|
|
Synchronized and notSynchronized are normal, synchIn and synchOut are
|
|
transitory. If the Network Dispatcher machine appears to be stuck
|
|
(for more than a minute), in a transitory state then that indicates
|
|
a problem.
|
|
|
|
If HighAvailability should be running and the substate is notSynchronized,
|
|
then that indicates a problem.
|
|
|
|
If High Availability is not running and the hasState is idle, then
|
|
all subState data is meaningless and should be ignored.
|
|
|
|
notSynchronized (0), network dispatcher is not in conact with partner machine
|
|
synchronized (1), network dispatcher is in contact with partner machine
|
|
sync-in (2), network dispatcher is going into standby state
|
|
sync-out (3), network dispatcher is going into active state"
|
|
::= { indHiAvailStatObjects 4 }
|
|
|
|
indReachStatTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndReachStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of reach table entries. The number of entries
|
|
is typically less than 10, with a maximum of 32."
|
|
::= { indStatus 7 }
|
|
|
|
indReachStatEntry OBJECT-TYPE
|
|
SYNTAX IndReachStatEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A reach table entry includes the address being pinged, and whether
|
|
the ping of that address was successful.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { rsAddr }
|
|
::= { indReachStatTable 1 }
|
|
|
|
IndReachStatEntry ::= SEQUENCE {
|
|
rsAddr IpAddress,
|
|
rsPingAble INTEGER
|
|
}
|
|
|
|
rsAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The address the reach advisor pings."
|
|
::= { indReachStatEntry 1 }
|
|
|
|
rsPingAble OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
unknown(0),
|
|
reachable(1),
|
|
unreachable(2)
|
|
}
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Whether this reach address (rsAddr) responded to a ping.
|
|
unknown (0), the rsAddr is unknown, possibly because the
|
|
reach advisor is not started.
|
|
reachable (1), the rsAddr was pinged successfully
|
|
unreachable (2) the rsAddr was not pinged successfully"
|
|
::= { indReachStatEntry 2 }
|
|
|
|
indRulesCnfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndRulesCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of rule config table entries There is no limit
|
|
to the number of rule entries. Each rule table row
|
|
describes rule configuration information."
|
|
::= { indConfig 5 }
|
|
|
|
indRulesCnfgEntry OBJECT-TYPE
|
|
SYNTAX IndRulesCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A rule config table entry has information about the
|
|
current configuration of the rule.
|
|
|
|
Rows in this table can not be created or destroyed via SNMP commands."
|
|
INDEX { csAddr, psNum, rcIndex }
|
|
::= { indRulesCnfgTable 1 }
|
|
|
|
IndRulesCnfgEntry ::= SEQUENCE {
|
|
rcIndex Integer32,
|
|
rcName DisplayString,
|
|
rcType INTEGER,
|
|
rcBeginRange Integer32,
|
|
rcEndRange Integer32,
|
|
rcPriority Integer32,
|
|
rcSrvrList DisplayString
|
|
}
|
|
|
|
rcIndex OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A unique number assigned to each rule in
|
|
a cluster, port combination"
|
|
::= { indRulesCnfgEntry 1 }
|
|
|
|
rcName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
-- Rsyntax OCTET STRING(SIZE(0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The user defined name of the rule. Rule names are
|
|
not necessarily unique."
|
|
::= { indRulesCnfgEntry 2 }
|
|
|
|
rcType OBJECT-TYPE
|
|
SYNTAX INTEGER {
|
|
true(0),
|
|
ip(1),
|
|
port(2),
|
|
time(3),
|
|
connection(4),
|
|
active(5)
|
|
}
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The type of rule
|
|
true (0), rules of this type are always true
|
|
ip (1), the rule is based on the client IP address
|
|
port (2), the rule is based on the client port
|
|
time (3), the rule is based on the time of day
|
|
connection (4), the rule is based on the number of
|
|
connections per second for the port
|
|
active (5) the rule is based on the number total
|
|
active connections for the port"
|
|
::= { indRulesCnfgEntry 3 }
|
|
|
|
rcBeginRange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The lower value in the range used to determine
|
|
if the rule is true or not. The data is
|
|
meaningless for rule type 0."
|
|
::= { indRulesCnfgEntry 4 }
|
|
|
|
rcEndRange OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The higher value in the range used to determine
|
|
if the rule is true or not. The data is
|
|
meaningless for rule type 0."
|
|
::= { indRulesCnfgEntry 5 }
|
|
|
|
rcPriority OBJECT-TYPE
|
|
SYNTAX Integer32
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The rule priority. Lower numbers are a
|
|
higher priority. Rule priority determines
|
|
the order in which rules are evaluated."
|
|
::= { indRulesCnfgEntry 6 }
|
|
|
|
rcSrvrList OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
-- Rsyntax OCTET STRING(SIZE(0..255))
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The list of servers this rule services. The server addresses
|
|
are represented as strings in dotted decimal notation, separated
|
|
by plus signs. For example, 37.44.24.13+12.23.54.76+9.67.127.82"
|
|
::= { indRulesCnfgEntry 7 }
|
|
|
|
indHrtBeatCnfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndHrtBeatCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of heartBeat Table entries. The number
|
|
of entries is usually less than the number of
|
|
interface cards in the Network Dispatcher machine.
|
|
The maximum is 32.
|
|
|
|
The heart beat table lists each of the monitoring
|
|
and responding heartbeat pairs."
|
|
::= { indConfig 8 }
|
|
|
|
indHrtBeatCnfgEntry OBJECT-TYPE
|
|
SYNTAX IndHrtBeatCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A indHrtBeatCnfg entry describing the monitoring
|
|
and responding addresses. Each heart beat source address
|
|
and heart beat destination address pair is unique.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { hbcSrcAddr, hbcDestAddr }
|
|
::= { indHrtBeatCnfgTable 1 }
|
|
|
|
IndHrtBeatCnfgEntry ::= SEQUENCE {
|
|
hbcSrcAddr IpAddress,
|
|
hbcDestAddr IpAddress,
|
|
hbcNumber Integer32
|
|
}
|
|
|
|
hbcSrcAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Address from which Network Dispatcher machine issues heartbeat
|
|
monitoring to its partner"
|
|
::= { indHrtBeatCnfgEntry 1 }
|
|
|
|
hbcDestAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Address of Network Dispatcher machine who's status is being monitored."
|
|
::= { indHrtBeatCnfgEntry 2 }
|
|
|
|
hbcNumber OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An integer number assigned to the heart beat pair."
|
|
::= { indHrtBeatCnfgEntry 3 }
|
|
|
|
indAdvsrCnfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndAdvsrCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of advisor config table entries. The number of entries
|
|
equals the number of ports times the number of advisors. Each
|
|
advisor table row describes the current status of the advisor,
|
|
port combination."
|
|
::= { indConfig 9 }
|
|
|
|
indAdvsrCnfgEntry OBJECT-TYPE
|
|
SYNTAX IndAdvsrCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An advisor entry describing current configuration of the Advisor. There is
|
|
an advisor table entry for each advisor, port combination.
|
|
|
|
Rows in this table can not be created or deleted via SNMP commands"
|
|
INDEX { acPort }
|
|
::= { indAdvsrCnfgTable 1 }
|
|
|
|
IndAdvsrCnfgEntry ::= SEQUENCE {
|
|
acPort Integer32,
|
|
acName DisplayString,
|
|
acVersion DisplayString
|
|
}
|
|
|
|
acPort OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of the port that the advisor is monitoring"
|
|
::= { indAdvsrCnfgEntry 1 }
|
|
|
|
acName OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
-- Rsyntax OCTET STRING(SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Name of the advisor. Some of the possible values are:
|
|
FTP, HTTP, NNTP, POP3, SMTP, SSL, Telnet. and custom
|
|
advisor names."
|
|
::= { indAdvsrCnfgEntry 2 }
|
|
|
|
acVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
-- Rsyntax OCTET STRING(SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Current version of the advisor"
|
|
::= { indAdvsrCnfgEntry 3 }
|
|
|
|
mcInterval OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
-- Units
|
|
-- seconds
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"How often the manager will update server
|
|
weights, in seconds."
|
|
::= { indMngrCnfgObjects 1 }
|
|
|
|
mcRefresh OBJECT-TYPE
|
|
SYNTAX Integer32(0..2147483647)
|
|
-- Units
|
|
-- mngrIntervals
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number of manager intervals (mcInterval) before
|
|
querying the executor for a refresh of information
|
|
about new and active connections"
|
|
::= { indMngrCnfgObjects 2 }
|
|
|
|
mcActiveProp OBJECT-TYPE
|
|
SYNTAX Percentages
|
|
-- Rsyntax Integer32(0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number from 0 to 100 representing the relative importance
|
|
of active connections. This number is used by the manager,
|
|
in calculating server weights.
|
|
|
|
The sum of mcActiveProp, mcNewProp, mcPortProp, and
|
|
mcSystemProp, must be 100"
|
|
::= { indMngrCnfgObjects 3 }
|
|
|
|
mcNewProp OBJECT-TYPE
|
|
SYNTAX Percentages
|
|
-- Rsyntax Integer32(0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number from 0 to 100 representing the relative importance
|
|
of new connections. This number is used by the manager,
|
|
in calculating server weights.
|
|
|
|
The sum of mcActiveProp, mcNewProp, mcPortProp, and
|
|
mcSystemProp, must be 100"
|
|
::= { indMngrCnfgObjects 4 }
|
|
|
|
mcPortProp OBJECT-TYPE
|
|
SYNTAX Percentages
|
|
-- Rsyntax Integer32(0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number from 0 to 100 representing the relative importance
|
|
of port advisor information. This number is used by the
|
|
manager, in calculating server weights.
|
|
|
|
The sum of mcActiveProp, mcNewProp, mcPortProp, and
|
|
mcSystemProp, must be 100"
|
|
::= { indMngrCnfgObjects 5 }
|
|
|
|
mcSystemProp OBJECT-TYPE
|
|
SYNTAX Percentages
|
|
-- Rsyntax Integer32(0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Number from 0 to 100 representing the relative importance
|
|
of the information from system metrics, such as ISS. This
|
|
number is used by the manager, in calculating server weights.
|
|
|
|
The sum of mcActiveProp, mcNewProp, mcPortProp, and
|
|
mcSystemProp, must be 100"
|
|
::= { indMngrCnfgObjects 6 }
|
|
|
|
mcSensitivity OBJECT-TYPE
|
|
SYNTAX Percentages
|
|
-- Rsyntax Integer32(0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Minimum sensitivity to weight updates. This setting defines
|
|
when the manager should change its weighting for the server
|
|
based on external information"
|
|
::= { indMngrCnfgObjects 7 }
|
|
|
|
mcSmoothing OBJECT-TYPE
|
|
SYNTAX Percentages
|
|
-- Rsyntax Integer32(0..100)
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"Index that smoothes the variations in weight when load balancing.
|
|
Smoothing can reduce the changes in weights from interval to
|
|
interval. The higher the smoothing value the less the weight will
|
|
change from interval to interval. 1.5 is a typical value. 4, for
|
|
example, is a high smoothhing value and would reduce the change in
|
|
weight from interval to interval to almost nothing.
|
|
|
|
The value is a percentage. For example a value of 155 should be
|
|
treated as 1.55 by managing applications."
|
|
::= { indMngrCnfgObjects 8 }
|
|
|
|
mcVersion OBJECT-TYPE
|
|
SYNTAX DisplayString
|
|
-- Rsyntax OCTET STRING(SIZE(0..255))
|
|
ACCESS read-only
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The version of the manager"
|
|
::= { indMngrCnfgObjects 9 }
|
|
|
|
indAllSrvrsCnfgTable OBJECT-TYPE
|
|
SYNTAX SEQUENCE OF IndAllSrvrsCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"A list of all servers table entries. The number of entries
|
|
equals the number of different servers configured."
|
|
::= { indConfig 11 }
|
|
|
|
indAllSrvrsCnfgEntry OBJECT-TYPE
|
|
SYNTAX IndAllSrvrsCnfgEntry
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"An all servers table entry describing operational aspects of
|
|
servers. This table is a list of all the servers currently
|
|
configured in Network Dispatcher.
|
|
|
|
Rows in this table can not be created or deleted via SNMP"
|
|
INDEX { ascAddr }
|
|
::= { indAllSrvrsCnfgTable 1 }
|
|
|
|
IndAllSrvrsCnfgEntry ::= SEQUENCE {
|
|
ascAddr IpAddress,
|
|
ascQuiesced TruthValue,
|
|
ascInstances Gauge32
|
|
}
|
|
|
|
ascAddr OBJECT-TYPE
|
|
SYNTAX IpAddress
|
|
ACCESS not-accessible
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The IP Address of the server in dotted decimal format"
|
|
::= { indAllSrvrsCnfgEntry 1 }
|
|
|
|
ascQuiesced OBJECT-TYPE
|
|
SYNTAX TruthValue
|
|
-- Rsyntax INTEGER {
|
|
-- true(1),
|
|
-- false(2)
|
|
-- }
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"True if this server has been quiesced, false otherwise.
|
|
When a server is quiesced, no more connections are sent
|
|
to the server. A server can be quiesced via the
|
|
ndcontrol manager quiesce command.
|
|
|
|
True=1, False=2."
|
|
::= { indAllSrvrsCnfgEntry 2 }
|
|
|
|
ascInstances OBJECT-TYPE
|
|
SYNTAX Gauge32
|
|
ACCESS read-write
|
|
STATUS mandatory
|
|
DESCRIPTION
|
|
"The current number of times this server, ascAddr, is in the
|
|
configuration."
|
|
::= { indAllSrvrsCnfgEntry 3 }
|
|
|
|
indHighAvailStatus TRAP-TYPE
|
|
-- Reverse mappable trap
|
|
ENTERPRISE dispatcherMib
|
|
VARIABLES {
|
|
hasState }
|
|
-- Status
|
|
-- mandatory
|
|
DESCRIPTION
|
|
"This trap announces that the value of the high availability
|
|
status state (hasState) variable has changed. The possible
|
|
values of hasState and their respective meanings are:
|
|
-idle, (0) this machine is routing packets and is not trying
|
|
to establish contact with its partner Network
|
|
Dispatcher
|
|
-listen, (1) high availability has just started and
|
|
network dispatcher is listening for partner,
|
|
-active, (2) this machine is routing packets.
|
|
-standby,(3) this machine is monitoring the active machine.
|
|
-preempt,(4) transitory state during switch from primary to backup
|
|
-elect, (5) network dispatcher is negotiating with partner
|
|
for who will primary or backup
|
|
-no_exec,(6) the executor is not running"
|
|
::= 1
|
|
|
|
indSrvrGoneDown TRAP-TYPE
|
|
-- Reverse mappable trap
|
|
ENTERPRISE dispatcherMib
|
|
VARIABLES {
|
|
ssActiveConns }
|
|
-- Status
|
|
-- mandatory
|
|
DESCRIPTION
|
|
"This trap announces that the weight for the server specified
|
|
by the csAddr, psNum, ssAddr portion of the Object Identifier
|
|
has gone to zero, The last known number of active connections
|
|
for the server is sent in the trap.
|
|
|
|
This trap indicates that, as far as Network Dispatcher can
|
|
determine, the specified server has gone down."
|
|
::= 2
|
|
|
|
indMibExecStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 1 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- esNonForAddr, esVersion, esNumClust, esTotalPkts,
|
|
-- esTooShortPkts, esNonForPkts, esClstrDscrdPkts,
|
|
-- esClstrErrPkts, esClstrLocalPkts, esClstrOwnAddrPkts,
|
|
-- esClstrForPkts, esForErrPkts, esNotClstrPkts, esHashBkts,
|
|
-- esStartTime
|
|
|
|
indMibClstrStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 2 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- csNumPorts, csActiveSYNs, csDroppedFINs, csDroppedACKs,
|
|
-- csDroppedRSTs, csDroppedPKTs, csNonExistingPKTs
|
|
|
|
indMibPortStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 3 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- psNumServers, psNumNodesDown
|
|
|
|
indMibSrvrStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 4 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- ssActiveConns, ssNewConns, ssTotalConns, ssTotalTcpConns,
|
|
-- ssTotalUdpConns, ssFinConns, ssCompleteConns, ssWeight,
|
|
-- ssSavedWeight, ssPortLoad, ssSystemLoad, ssActiveConnsWeight,
|
|
-- ssNewConnsWeight, ssPortLoadWeight, ssSystemLoadWeight
|
|
|
|
indMibRulesStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 5 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- rsTimesFired, rsNumSrvrs
|
|
|
|
indMibHiAvailStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 6 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- hasPrimary, hasPort, hasState, hasSubState
|
|
|
|
indMibReachStatGroup OBJECT IDENTIFIER ::= { indMibStatGroups 7 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- rsPingAble
|
|
|
|
indMibRulesCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 5 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- rcName, rcType, rcBeginRange, rcEndRange, rcPriority,
|
|
-- rcSrvrList
|
|
|
|
indMibHrtBeatCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 8 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- hbcNumber
|
|
|
|
indMibAdvsrCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 9 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- acName, acVersion
|
|
|
|
indMibMngrCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 10 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- mcInterval, mcRefresh, mcActiveProp, mcNewProp, mcPortProp,
|
|
-- mcSystemProp, mcSensitivity, mcSmoothing, mcVersion
|
|
|
|
indMibAllSrvrsCnfgGroup OBJECT IDENTIFIER ::= { indMibCnfgGroups 11 }
|
|
-- OBJECT-GROUP
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- ...
|
|
-- objects
|
|
-- ascQuiesced, ascInstances
|
|
|
|
indMibCompliance OBJECT IDENTIFIER ::= { indMibCompliances 1 }
|
|
-- MODULE-COMPLIANCE
|
|
-- Status
|
|
-- mandatory
|
|
-- Descr
|
|
-- The compliance statement for the Dispatcher MIB module.
|
|
-- Module
|
|
-- >>current<<
|
|
-- MandGroup
|
|
-- indMibExecStatGroup
|
|
-- MandGroup
|
|
-- indMibClstrStatGroup
|
|
-- MandGroup
|
|
-- indMibPortStatGroup
|
|
-- MandGroup
|
|
-- indMibSrvrStatGroup
|
|
|
|
|
|
END
|
|
|