* Remove some lightly used or unused dbFacile functions
['NULL'] legacy behavior seems unsupported, replace with actual nulls
* Fix refactor mishap
* another
* update baseline
* these were very wrong... what happened?
Previously, if the device was ping only, it wasn't marked as discovered.
Now we always run discovery, but basically all it does is update last_discovered.
* Fix up version and git helpers
Improve method names
Move all git calls into the git helper
Allow runtime and external cache of results where appropriate
Consolidate version headers for discovery, poller, and validate
* Style fixes
* improve consistency in git calls
* fix style
* don't send name inconsistently
* Improve database versions
* No need to cache Version it is not used more than once currently.
* Oxidized + Device remove
Was just working on oxidized, but then to properly update nodes after delete, updated delete_device()
* revert dumb style changes
* baseline update and no DI there...
* Fix OS first load and device deletion missing tables
* core WIP
* try to finish up
* trim space too
and a couple of cleanups
* update test data
* put escapes back
* another net-snmp difference
* correct copy paste error
* WIP
* Use new code YAY
* a tiny bit more
* Kind of working
* Handle manual modules correctly
* convert core to modern module
* Only save metrics if modules is not overridden
* correct module exists check
* database error handling
* debug handling
* restore bad changes
* Introduce Actions
RunAlertRulesAction
UpdateDeviceGroupsAction
* tweaks to output
* Fix some issues in outside code
* Style fixes
* fixes to module status checks
* typehints!
* Use logger only and DI
* OS module not named correctly
* Work on quiet output a bit more
* generically don't change output when disabling debug if the driver is already stack
* Fix missing $device variable for legacy os polling
Fix missing dbFacile functions when no legacy modules polled in RunAlertRulesAction
* restore legacy os module shim
* use the new poller code for tests
* PollingDevice event
* Fix some issues and enable/disable error reporting around legacy modules
* typehints
* fully update baseline
* Use Process for version commands so we don't leak debug output.
* don't detect rrdtool version in ci every time
* style fixes
* Warning fixes
* more fixes
* re-update baseline
* remove diff noise
* fix up alerts
* Catch exceptions in device ip lookup
* Revert accidental snmp.inc.php poller target change
(should have been ?: not ??)
* core WIP
* try to finish up
* trim space too
and a couple of cleanups
* update test data
* put escapes back
* another net-snmp difference
* correct copy paste error
* WIP
* Use new code YAY
* a tiny bit more
* Kind of working
* Handle manual modules correctly
* convert core to modern module
* Only save metrics if modules is not overridden
* correct module exists check
* database error handling
* debug handling
* restore bad changes
* Introduce Actions
RunAlertRulesAction
UpdateDeviceGroupsAction
* tweaks to output
* Fix some issues in outside code
* Style fixes
* fixes to module status checks
* typehints!
* Use logger only and DI
* OS module not named correctly
* Work on quiet output a bit more
* generically don't change output when disabling debug if the driver is already stack
* Fix missing $device variable for legacy os polling
Fix missing dbFacile functions when no legacy modules polled in RunAlertRulesAction
* restore legacy os module shim
* use the new poller code for tests
* PollingDevice event
* Fix some issues and enable/disable error reporting around legacy modules
* typehints
* fully update baseline
* Use Process for version commands so we don't leak debug output.
* don't detect rrdtool version in ci every time
* style fixes
* Warning fixes
* more fixes
* re-update baseline
* remove diff noise
* fix up alerts
* Use Measurements for all statistic collection
* fix space
* Use colors
cleanup
* fix style
* manually fix license notice
* add return times and new line
* add return times and new line
* fix mistake in copyright template
* fix style
* Remove $debug global
and $vdebug global
makes these variables more accessible and protects from collisions.
* the on boot set sends application as the first parameter, just handle that
* Relocate other debug related functions
* Log debug to stdout
* Wrong output
* remove stupid constants
* Fix lint and style issues
* Implement locks in the file cache
* Replace custom locks
* implement restore lock
Used when re-hydrating
* remove legacy use statements
* Add class descriptions
* Fix style
* Default to database cache driver
* missed cache_locks table
prevent chicken-egg issue
* style fixes
* Remove custom file lock implementation
* missed items from file cache
* Update schema definition
hmm, other schema noise must be from manual modification as this is generated from a freshly migrated db.
* require predis, it is pure python, so no harm in adding
* and set predis as the default client
* Ping only device doesn't display
if os was set to something, ping os wasn't loaded and we try to get overview graphs from it.
* Fix snmp_disable device page load error
When other os is set.
* Revamp os setting loading
the only safe way to access is Config::getOsSetting()
* Remove getOsSetting fallback behavior
Most instances don't use it and it can have unexpected results Config::getOsSetting('blah', 'group') == 'librenms'
* refactor and remove unneeded load_os/loadOs calls now since getOsSetting automatically loads it.
* restore unix overview graphs, they are different
small cleanups
* fix
* Device Cache
also some additional device related models
* attribs from cache
* replace common attribute functions
* remove legacy cache usage
tidy up some collection manipulation
remove some unused or single use functions
* cleanup some items
* always return a device, to prevent bugs
* clear device cache when testing after each test
* fix double assignment
* Clean up function to take advantage of null object
* initial db/defaults dump
* numeric values
* Remove $config['time']
* Use config_definitions.json
* try setting definition as a complete array
* a little more
* fix format
* WIP converting dynamic setting pages
* rewriting the webui
* remove legacy and add translations
* finish email section
* improve navigation
update js a bit
* Import the remaining existing settings
* Update backend still some wip
migration
* fix config loading (db not overriding defaults)
* some cleanup
* more array collapsing
* update settings
* Settings search
* add purge settings to ui, order groups and sections
* collapse more arrays
* Auth definitions WIP
* remove needless slash escapes
* add warning to json
* moving settings from defaults.inc
* remove slow_statistics
* Move rrdtool settings to the poller section
* Use translations more consistently
* removing more settings from defaults.inc.php
* show setting name in tooltip
* allow help text to be shown on mobile
* disable settings that are set in config.php
* Implement undo and reset to default.
* Vue.js functional
* Vue.js WIP
* Implement tabs component
* accordion WIP
* lodash ver update
* two items
* Accordion somewhat working
* hash navigation
* Refine Accordion
* Fix up tab styling a bit
* Cleaner tab selected property
Hide html while loading
* spinner?
* Icon support
property for accordion to active
* WIP
* Tabs/Sections from ajax
* Setting Component skeletons
* Dynamic Component resolution
* Basic functionality
* toggle class
* Refactor components
* translate tabs and accordions
* simple array attempt
* improve readonly tooltip
* array styling
* array value editing
* organize snmp info
* Handle initial tab/section in url
* Use Laravel to parse tab/section, dump old
* Draggable array entries
* v-tooltip, for clickable (and touch) help tooltips
disable draggable
* Navigation WIP
* Navigation WIP
* groups computed
* filter settings
* fix event reference
* vue.js i18n initial
* missing description = just setting name
* en fallback
* tidy up the language support and js generation
* persist value to db
* fix issue with 0
* Delete settings from DB instead of setting them to default
* ldap-groups
fixup style
* Default dashboard selection
* fix array of options instead of object
* allow custom validation for settings
* translate options in SettingSelect
* SNMP v3 WIP
* fix setting arrays
* Split persist out of set
* Hook up events for SNMP v3 Auth
correct Config::persist behaviour with arrays
* dependent settings (primitive for now)
actually update the settings values in the LibrenmsSettings component
* more complex "when" behaviour
* remove un-needed seeder
* add poller_modules.cisco-qfp
* remove en.json (disable warning)
* don't set default for log_dir or log_file, otherwise it won't be processed correctly
* Fix module order
add some missing settings
* more config corrections
* correct graphs
correct loading values set to null (although it should have no difference)
remove project_name_version
* Add nfsen settings. Docs are very confusing, so might have flubbed something
remove option for array definition of select option as numeric indexes messes it up
* Correct more upstream config differences
* Config cleanup after a bunch of merges.
* Fixes
* add version tags to js/css files
remove old js
* Print out full settings list read-only
* Add http_proxy setting
fix indents in config_definitions.json
* repeaters default is 0 (aka 20)
* cleanups
* rewrite the dynamic config docs
* add language docs
* Don't show snmp v3 auth add/remove if disabled by config.php
Use Log facility when Laravel is booted.
Update init.php so we can easily boot Laravel for CLI scripts. (and just Eloquent, but that may go away)
Move all debug setup into set_debug() function and use that across all scripts.
Log Laravel database queries.
Send debug output to librenms log file when enabling debug in the webui.
Allow for colorized Log CLI output. (currently will leave % tags in log file output)
** Needs testing and perhaps tweaking still.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Mostly useful for debugging
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Don't exit with a non-zero value in case no new devices were discovered, as non-zero codes are considered failed jobs for most cron implementations and produce logs like the following (in Debian):
```
cron.info CRON[963890]: (CRON) error (grandchild #963892 failed with exit status 5)
```
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [X] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
Currently has a file handle leak (and will eventually run out of handles) related to the self update process.
Either need to fix that or rip out self-update and leave that up to cron or something.
DO NOT DELETE THIS TEXT
#### Please note
> Please read this information carefully. You can run `./scripts/pre-commit.php` to check your code before submitting.
- [x] Have you followed our [code guidelines?](http://docs.librenms.org/Developing/Code-Guidelines/)
#### Testers
If you would like to test this pull request then please run: `./scripts/github-apply <pr_id>`, i.e `./scripts/github-apply 5926`
* fix: allow discovery to check if devices are down before skipping
We could also exclude snmp_disable devices from SQL query, worthwhile?
* also skip ping only devices
* fix: devices detected as ibmtl
Guess at the sysObjectID, please report if you have devices that should be ibmtl and are no longer detected.
Add output of os in discovery.
* Always load all os for discovery. Should be cached most of the time.
* refactor: convert validations to modules to prep for gui integration
* accidentally dropped, schema update
* fix accidental output to webui
* mention discovery-wrapper.py and re-arrange.
* refine some fix statements
* rename the Config validation group to Configuration.
* fix some scrutinizer issues
remove as many local functions from validator.php as possible
move extensions from pre-check
remove duplicate timezone check
looks like there is some db schema differences between mariadb 10.1 and 10.2, investigating
* mariadb version diff take2
* Check schema version first for database.
Remove stop to go back to command line for install docs.
Add helpful link when there is no devices added to /addhost
* fix incorrect validation for empty string defaults
* Fix style
* Add additional file permissions checks
* catch exception and fail for invalid timezone
Change visuals a bit.
* add php version warning
* fix space
* Use the new locks for schema updates
* removed schema lock from discovery
* Add the ability to wait for a lock.
Add unit tests
* Add MysqlLock
Use that for the schema updates
Wait up to 30s for other schema updates to complete.
* Switch the schema lock back to a file lock for now.
Make FileLock support indefinite locking without polling.
Add a warning to MysqlLock for scenarios where it won't work.
* Delete MysqlLock.php
* Removed MySQL lock tests
* fix: page/graph load speed: part 1
Speed up load_all_os() by caching the full $config['os'] array
Function time goes from 1.13648s -> 0.00073s
The cache is updated during discovery, but only if it is >22hrs old.
Additionally, the cache is not used and a full yaml load is forced if the cache is >24hrs old.
The cache time is controlled by $config['os_def_cache_time'], I don't see any reason anyone would change that time.
* Delete Session.php
* Include the cache directory.
There were two or more separate $device arrays during discovery. When one was updated, others were not.
Combine those all.
Make sure the new os is loaded if the os changed.
* feature: allow validate.php to be run from any working directory
* remove redundant realpath() call
* re-add realpath() to remove symbolic links
* realpath() isn't needed...
* chdir() in all php scripts in ./ and ./scripts/
* update-sql.php clearly is not used, as it was broken.
* Change some scripts to executable
Remove extra chdir() call in snmp-scan.php
* Missed console-ui.php
Kind of fixed console-ui.php help output
* Re-add newline
Tony Murray