diff --git a/includes/definitions/discovery/hpe-pdumm.yaml b/includes/definitions/discovery/hpe-pdumm.yaml
new file mode 100644
index 0000000000..a1df82e814
--- /dev/null
+++ b/includes/definitions/discovery/hpe-pdumm.yaml
@@ -0,0 +1,59 @@
+mib: CPQPOWER-MIB
+modules:
+    sensors:
+        current:
+            data:
+                -
+                    oid: pduOutputBreakerTable
+                    value: breakerCurrent
+                    num_oid: '.1.3.6.1.4.1.232.165.2.3.2.1.3.{{ $index }}'
+                    index: 'breakerCurrent.{{ $index }}'
+                    descr: 'PDU {{ $subindex0 }} Phase {{ $subindex1 }}'
+                    skip_values: -1
+        load:
+            data:
+                -
+                    oid: pduOutputBreakerTable
+                    value: breakerPercentLoad
+                    num_oid: '.1.3.6.1.4.1.232.165.2.3.2.1.4.{{ $index }}'
+                    index: 'breakerPercentLoad.{{ $index }}'
+                    descr: 'PDU {{ $subindex0 }} Phase {{ $subindex1 }}'
+                    skip_values: -1
+                -
+                    oid: pduOutputTable
+                    value: pduOutputLoad
+                    num_oid: '.1.3.6.1.4.1.232.165.2.3.1.1.2.{{ $index }}'
+                    index: 'pduOutputLoad.{{ $index }}'
+                    descr: 'PDU {{ $index }}'
+                    skip_values: -1
+
+        voltage:
+            data:
+                -
+                    oid: pduOutputBreakerTable
+                    value: breakerVoltage
+                    num_oid: '.1.3.6.1.4.1.232.165.2.3.2.1.2.{{ $index }}'
+                    index: 'breakerVoltage.{{ $index }}'
+                    descr: 'PDU {{ $subindex0 }} Phase {{ $subindex1 }}'
+                    skip_values: -1
+        power:
+            data:
+                -
+                    oid: pduOutputTable
+                    value: pduOutputPower
+                    num_oid: '.1.3.6.1.4.1.232.165.2.3.1.1.4.{{ $index }}'
+                    index: 'pduOutputPower.{{ $index }}'
+                    descr: 'PDU {{ $index }}'
+                    skip_values: -1
+        state:
+            data:
+                -
+                    oid: pduIdentTable
+                    value: pduStatus
+                    num_oid: '.1.3.6.1.4.1.232.165.2.1.2.1.8.{{ $index }}'
+                    descr: 'PDU {{ $index }}'
+                    states:
+                        - { value: 1, generic: 3, descr: other, graph: 0 }
+                        - { value: 2, generic: 0, descr: ok, graph: 0 }
+                        - { value: 3, generic: 1, descr: degraded, graph: 0 }
+                        - { value: 4, generic: 2, descr: failed, graph: 0 }
diff --git a/includes/definitions/hpe-pdumm.yaml b/includes/definitions/hpe-pdumm.yaml
new file mode 100644
index 0000000000..2506d2f7c8
--- /dev/null
+++ b/includes/definitions/hpe-pdumm.yaml
@@ -0,0 +1,12 @@
+os: hpe-pdumm
+text: 'HP PDU Management Module'
+type: power
+icon: hpe
+over:
+    - {graph: device_load, text: Load}
+    - {graph: device_current, text: Current}
+mib_dir:
+    - hp
+discovery:
+    - sysDescr:
+        - 'HP PDU Management Module'
diff --git a/includes/polling/os/hpe-pdumm.inc.php b/includes/polling/os/hpe-pdumm.inc.php
new file mode 100644
index 0000000000..d0207503e7
--- /dev/null
+++ b/includes/polling/os/hpe-pdumm.inc.php
@@ -0,0 +1,11 @@
+<?php
+/*
+ * LibreNMS
+ *
+ * This program is free software: you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation, either version 3 of the License, or (at your
+ * option) any later version.  Please see LICENSE.txt at the top level of
+ * the source code distribution for details.
+ */
+list(,$version) = explode('firmware version ', $device['sysDescr']);
diff --git a/mibs/hp/CPQPOWER-MIB b/mibs/hp/CPQPOWER-MIB
index e4875e77fc..ecec8fbbab 100644
--- a/mibs/hp/CPQPOWER-MIB
+++ b/mibs/hp/CPQPOWER-MIB
@@ -1,5874 +1,8329 @@
--- ****************************************************************************
--- ****************************************************************************
---
---            Power Device SNMP Management Card 
---         Management Information Base for SNMP Network Management
---
---
---      Copyright 2001, 2014 Hewlett-Packard Development Company, L.P.
---
---      Hewlett-Packard Company shall not be liable for technical or
---      editorial errors or omissions contained herein. The information in
---      this document is provided "as is" without warranty of any kind and
---      is subject to change without notice. The warranties for HP products
---      are set forth in the express limited warranty statements
---      accompanying such products. Nothing herein should be construed as
---      constituting an additional warranty.
---
---      Confidential computer software. Valid license from HP required for
---      possession, use or copying. Consistent with FAR 12.211 and 12.212,
---      Commercial Computer Software, Computer Software Documentation, and
---      Technical Data for Commercial Items are licensed to the U.S.
---      Government under vendor's standard commercial license.
---
---      Refer to the READMIB.RDM file for more information about the
---      organization of the information in the Compaq Enterprise.
---
---      The Compaq Enterprise number is 232.
---      The ASN.1 prefix to, and including the Compaq Enterprise is:
---           1.3.6.1.4.1.232
---
---      MIB Version 1.80
---    
---
---    *********************************************************************
---    *********************************************************************
---
--- VARIABLES REQUIRED FOR HP MANAGEMENT
--- ===================================================================================
---
--- ===================================================================================
--- sysDescr (1.3.6.1.2.1.1.1) which is defined in RFC1213.MIB.
--- sysObjectID (1.3.6.1.2.1.1.2) which is defined in RFC1213.MIB.
--- sysContact (1.3.6.1.2.1.1.4) which is defined in RFC1213.MIB.
--- sysName (1.3.6.1.2.1.1.5) is which is defined in RFC1213.MIB.
--- sysLocation (1.3.6.1.2.1.1.6) which is defined in RFC1213.MIB.
--- 
--- sysDescr OBJECT-TYPE
---     SYNTAX  DisplayString (SIZE (0..255))
---     ACCESS  read-only
---     STATUS  mandatory
---     DESCRIPTION
---             "A textual description of the entity.  This value
---             should include the full name, hardware version and
---             firmware version of management module's.
---             It is mandatory that this only contain
---             printable ASCII characters."
---     ::= { system 1 }
---
--- sysObjectID OBJECT-TYPE
---     SYNTAX  DisplayString (SIZE (0..255))
---     ACCESS  read-write
---     STATUS  mandatory
---     DESCRIPTION
---             "Return the OID of the management module
---             for this UPS or PDU defined in the CPQPOWER.MIB
---             i.e. .1.3.6.1.4.1.232.165.3 is for UPS OIDs."
---     ::= { system 2 }
---
--- sysContact OBJECT-TYPE
---     SYNTAX  DisplayString (SIZE (0..255))
---     ACCESS  read-write
---     STATUS  mandatory
---     DESCRIPTION
---             "The textual identification of the contact person
---             for this managed node, together with information
---             on how to contact this person."
---     ::= { system 4 }
---
--- sysName OBJECT-TYPE
---     SYNTAX  DisplayString (SIZE (0..255))
---     ACCESS  read-write
---     STATUS  mandatory
---     DESCRIPTION
---             "An administratively-assigned name for this
---             managed node.  By convention, this is the node's
---             fully-qualified domain name."
---     ::= { system 5 }
---
--- sysLocation OBJECT-TYPE
---     SYNTAX  DisplayString (SIZE (0..255))
---     ACCESS  read-write
---     STATUS  mandatory
---     DESCRIPTION
---             "The physical location of this node (e.g.,
---             `telephone closet, 3rd floor')."
---     ::= { system 6 }
---
--- ====================================================================================
---
--- ====================================================================================
--- cpqSiSysSerialNum (1.3.6.1.4.1.232.2.2.2.1) which is defined in CPQSINFO.MIB.
--- This is the PDU/UPS serial number (listed but not implemented in SNMP Agent)
--- 
--- 
--- cpqSiSysSerialNum OBJECT-TYPE
---      SYNTAX  DisplayString (SIZE (0..255))
---      ACCESS  read-only
---      STATUS  mandatory
---      DESCRIPTION
---          "The serial number of the PDU or UPS.
---           The string will be empty if the system does not report the
---          serial number."
---      ::= { cpqSiAsset 1 }
--- ===================================================================================
---
--- ===================================================================================
--- cpqSiProductName (1.3.6.1.4.1.232.2.2.4.2) which is defined in CPQSINFO.MIB.
--- This is the PDU/UPS management module product model name 
--- 
---
---  cpqSiProductName OBJECT-TYPE
---         SYNTAX  DisplayString (SIZE (0..255))
---         ACCESS  read-only
---         STATUS  mandatory
---         DESCRIPTION
---             "This device product name i.e. HP UPS Management Module"
---         ::= { cpqSiSystemBoard 2 }
--- ====================================================================================
---
--- ====================================================================================
--- cpqHoGUID (1.3.6.1.4.1.232.11.2.10.3) which is defined in CPQHOST.MIB 
--- This field needs to be filled with the unique ID
--- P/N of PDU/UPS management module (16 bytes)
---
--- cpqHoGUID OBJECT-TYPE
---         SYNTAX  OCTET STRING (SIZE (16))
---         ACCESS  read-write
---         STATUS  mandatory
---         DESCRIPTION
---             "The globally unique identifier of this device. P/N of HP Management Module."
---         ::= { cpqHoSystemStatus 3 }
--- ====================================================================================
---
--- ====================================================================================
--- cpqHoMibStatusArray (1.3.6.1.4.1.232.11.2.10.1) which is defined in CPQHOST.MIB 
--- Pretty complicated to decipher if you do not have the guide.  We only use the first 
--- 4 octets.
---
--- Octet 0 = 00000001 (always)
--- Octet 1 = 00000000 through 00000100 depending on Device H/W Condition below
--- Octet 2 = 00000001 (always)
--- Octet 3 = 00010000 (always decimal 16 see table below)
---
--- For example: With a UPS device with OK status, the values of the 4 octets would be:
---
--- Octet 0 = 0x01 (fixed)
--- Octet 1 = 0x02 (OK overall status)
--- Octet 2 = 0x01 (fixed)
--- Octet 3 = 0x10 (Device type = 16 for UPS)
---
--- cpqHoMibStatusArray OBJECT-TYPE
---         SYNTAX  OCTET STRING (SIZE (4..256))
---         ACCESS  read-only
---         STATUS  mandatory
---         DESCRIPTION
---             "The MIB Status Array is an array of MIB status structures. Each
---             structure is made up of 4 octets.
---
---             Array element 0 is the status for all MIBs in the Compaq
---             Enterprise.
---
---             Device H/W Condition (Octet 1)
---                0 - Not available (e.g. Loss/lack of communication between card and device UPS/PDU)  
---                1 - Other (unknown) (mapped to device unknown status)
---                2 - OK 		(mapped to device normal status/events)
---                3 - Degraded 	(UPS: device warning status/events
---                                   PDU: overload warning, voltage out of tolerance)
---                4 - Failed 		(UPS: device critical status/events
---                                   PDU: overload condition)
---
---             Detailed Type (octet 3)
---                Bits 0-7    Detailed Type, only used if bit 0 in octect 2 is 1.
---
---             Type Values for Bits 0-4 (maps to CIM7 types)
---             Unknown                    =  0
---             Server                     =  1  (yes a duplicate of the server flag)
---             Desktop                    =  2
---             Workstation                =  3
---             Portable                   =  4
---             Router                     =  5
---             Cluster                    =  6
---             Printer                    =  7
---             Switch                     =  8  (network switch)
---             Repeater                   =  9
---             Remote Access Device       = 10
---             Other                      = 11
---             Management Processor       = 12  (rib, RILOE, iLo)
---             Rack                       = 13
---             Enclosure                  = 14
---             KVM Switch                 = 15  (IP enabled keyboard video mouse switch).
---             UPS                        = 16
---             Power Distribution Unit    = 17  (PDU)
---             Environmental Monitor      = 18  (eg CMC)
---             Power Distribution Rack    = 19  (PDR)"
---         ::= { cpqHoSystemStatus 1 }
--- ====================================================================================
--- All Traps, Objects of CPQPOWER.MIB start with  .1.3.6.1.4.1.232.165
-
-CPQPOWER-MIB DEFINITIONS ::= BEGIN
-
-IMPORTS
-    compaq        FROM CPQHOST-MIB
---    enterprises   FROM RFC1155-SMI
---    IpAddress     FROM RFC1155-SMI
-
---    Counter, enterprises   FROM RFC1155-SMI
-
---    TimeTicks     FROM RFC1155-SMI
---    Gauge         FROM RFC1155-SMI
-    Counter       FROM RFC1155-SMI
-    DisplayString FROM RFC1213-MIB
-    ifIndex       FROM RFC1213-MIB
-    ifDescr       FROM RFC1213-MIB
-    sysName       FROM RFC1213-MIB
-    sysDescr      FROM RFC1213-MIB
-    sysContact    FROM RFC1213-MIB
-    sysLocation   FROM RFC1213-MIB  
-    OBJECT-TYPE   FROM RFC-1212
-    TRAP-TYPE     FROM RFC-1215;
-
--- Identifiers from CPQSINFO.MIB (no longer used by HP SIM)
--- cpqSystemInfo           OBJECT IDENTIFIER       ::= {compaq 2}
--- cpqSiComponent          OBJECT IDENTIFIER       ::= {cpqSystemInfo 2}
--- cpqSiSystemBoard        OBJECT IDENTIFIER       ::= {cpqSiComponent 4}
-
--- Identifiers from CPQHOST.MIB (include when compiling)
--- cpqHostOs               OBJECT IDENTIFIER       ::= {compaq 11}
--- cpqHoComponent          OBJECT IDENTIFIER       ::= {cpqHostOs 2}
--- cpqHoSystemStatus       OBJECT IDENTIFIER       ::= {cpqHoComponent 10}
-
--- compaq                  OBJECT IDENTIFIER 	::= { enterprises 232 }
-cpqPower                OBJECT IDENTIFIER       ::= {compaq 165}
-
---
--- Power device object identifiers
---
-powerDevice             OBJECT IDENTIFIER       ::= {cpqPower 1}  
-
-trapInfo                OBJECT IDENTIFIER       ::= {powerDevice 1}
-managementModuleIdent   OBJECT IDENTIFIER       ::= {powerDevice 2}
-
---
--- PDU object identifiers
---
-pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}  
-
-pduIdent                OBJECT IDENTIFIER       ::= { pdu 1 }
-pduInput                OBJECT IDENTIFIER       ::= { pdu 2 }
-pduOutput               OBJECT IDENTIFIER       ::= { pdu 3 }
-
---
--- UPS object identifiers
---
-ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
-
-upsIdent                OBJECT IDENTIFIER       ::= { ups 1 }
-upsBattery              OBJECT IDENTIFIER       ::= { ups 2 }
-upsInput                OBJECT IDENTIFIER       ::= { ups 3 }
-upsOutput               OBJECT IDENTIFIER       ::= { ups 4 }
-upsBypass               OBJECT IDENTIFIER       ::= { ups 5 }
-upsEnvironment          OBJECT IDENTIFIER       ::= { ups 6 }
-upsTest                 OBJECT IDENTIFIER       ::= { ups 7 }
-upsControl              OBJECT IDENTIFIER       ::= { ups 8 }
-upsConfig               OBJECT IDENTIFIER       ::= { ups 9 }
-upsRecep                OBJECT IDENTIFIER       ::= { ups 10 }
-upsTopology             OBJECT IDENTIFIER       ::= { ups 11 }
-
---
--- PDR object identifiers
---
-pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
-
-pdrIdent                OBJECT IDENTIFIER       ::= { pdr 1 }
-pdrPanel                OBJECT IDENTIFIER       ::= { pdr 2 }
-pdrBreaker              OBJECT IDENTIFIER       ::= { pdr 3 }
-
---
--- MPDU object identifiers
---
-mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}  
-
-mpduIdent                OBJECT IDENTIFIER       ::= { mpdu 1 }
-mpduOutput               OBJECT IDENTIFIER       ::= { mpdu 2 }
-mpduDeviceIdent          OBJECT IDENTIFIER       ::= { mpdu 3 }
-mpduSmExtBarOutlet       OBJECT IDENTIFIER       ::= { mpdu 4 }
-
---
--- oups (offline UPS) object identifiers
---
-oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
-
-oupsIdent                OBJECT IDENTIFIER       ::= { oups 1 }
-oupsBattery              OBJECT IDENTIFIER       ::= { oups 2 }
-oupsInput                OBJECT IDENTIFIER       ::= { oups 3 }
-oupsOutput               OBJECT IDENTIFIER       ::= { oups 4 }
-oupsMonitor              OBJECT IDENTIFIER       ::= { oups 5 }
-oupsRackDiscovery        OBJECT IDENTIFIER       ::= { oups 6 }
-
---
--- PDU Glendore object identifiers
---
-pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
-
-pdu2Ident                OBJECT IDENTIFIER       ::= { pdu2 1 }
-pdu2Input                OBJECT IDENTIFIER       ::= { pdu2 2 }
-pdu2Group                OBJECT IDENTIFIER       ::= { pdu2 3 }
-pdu2Environment          OBJECT IDENTIFIER       ::= { pdu2 4 }
-pdu2Outlet               OBJECT IDENTIFIER       ::= { pdu2 5 }
-
-
-
--- ====================================================================================
---
--- powerDevice             OBJECT IDENTIFIER       ::= {cpqPower 1}  
--- trapInfo                OBJECT IDENTIFIER       ::= {powerDevice 1}
--- trap information group
--- OID= .1.3.6.1.4.1.232.165.1.1
-
-trapCode OBJECT-TYPE
-	SYNTAX INTEGER
-	ACCESS read-only
-	STATUS mandatory
-	DESCRIPTION
-		"A number identifying the event for the trap that was sent.
-		 Mapped unique trap code per unique event to be used by ISEE's
-		 decoder ring."
-	::= { trapInfo 1 }
-
-trapDescription OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..255))
-	ACCESS read-only
-	STATUS mandatory
-	DESCRIPTION
-		"A string identifying the event for that last trap that was sent."
-	::= { trapInfo 2 }
-
-trapDeviceMgmtUrl OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..255))
-	ACCESS read-only
-	STATUS mandatory
-	DESCRIPTION
-	    "A string contains the URL for the management software."
-	::= { trapInfo 3 }
-
-trapDeviceDetails OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..255))
-	ACCESS read-only
-	STATUS mandatory
-	DESCRIPTION
-		"A string details information about the UPS such as SN (serial number), 
-                 PN (part number), and MN (Model Name)."
-	::= { trapInfo 4 }
-
-trapDeviceName OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..255))
-	ACCESS read-only
-	STATUS mandatory
-	DESCRIPTION
-		"A string contains the name of the HP Management Module."
-	::= { trapInfo 5 }
-
-
-
--- ====================================================================================
---                      HP UPS Management Module
--- ====================================================================================
---
--- powerDevice             OBJECT IDENTIFIER       ::= {cpqPower 1}  
--- managementModuleIdent   OBJECT IDENTIFIER       ::= {powerDevice 2}
--- Management module identification group
--- OID= .1.3.6.1.4.1.232.165.1.2
-
-deviceManufacturer OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The device's manufacturer."
-    ::= { managementModuleIdent 1 }
-
-deviceModel OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The device's model."
-    ::= { managementModuleIdent 2 }
-
-deviceFirmwareVersion OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The device's firmware version(s)."
-    ::= { managementModuleIdent 3 }
-
-deviceHardwareVersion OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-            "The device's hardware version."
-    ::= { managementModuleIdent 4 }
-
-deviceIdentName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-           "A string identifying the device. it came from sysName entered by user"
-    ::= { managementModuleIdent 5 }
-
-devicePartNumber OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The device's part number."
-    ::= { managementModuleIdent 6 }
-
-deviceSerialNumber OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The device's serial number."
-    ::= { managementModuleIdent 7 }
-
-deviceMACAddress OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The device's MAC address."
-    ::= { managementModuleIdent 8 }
-
-
--- ====================================================================================
---                                     PDU
--- ====================================================================================
---  
---  pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}  
---  pduIdent                OBJECT IDENTIFIER       ::= { pdu 1 }
---  PDU identification group
---  OID= .1.3.6.1.4.1.232.165.2.1
-
-numOfPdu OBJECT-TYPE
-    SYNTAX INTEGER (0..63)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of PDUs."
-    ::= { pduIdent 1 }
-    
-pduIdentTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF PduIdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The Aggregate Object with number of entries equal to
-	    NumOfPdu and including the PduIdent group."
-    ::= { pduIdent 2 }
-
-pduIdentEntry OBJECT-TYPE
-    SYNTAX PduIdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The ident table entry containing the name,
-	    model, manufacturer, firmware version, part number, etc."
-    INDEX { pduIdentIndex }
-    ::= { pduIdentTable 1 }
-
-PduIdentEntry ::= SEQUENCE {
-      pduIdentIndex         INTEGER,
-      pduName               DisplayString,
-      pduModel              DisplayString,
-      pduManufacturer       DisplayString,
-      pduFirmwareVersion    DisplayString,
-      pduPartNumber         DisplayString,
-      pduSerialNumber       DisplayString,
-      pduStatus             INTEGER,
-      pduControllable       INTEGER
-    }
-
-pduIdentIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the PduIdentEntry table."
-    ::= { pduIdentEntry 1 }
-
-pduName OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"The string identify the device."
-    ::= { pduIdentEntry 2 }
-
-pduModel OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Model."
-    ::= { pduIdentEntry 3 }
-
-pduManufacturer OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
-    ::= { pduIdentEntry 4 }
-
-pduFirmwareVersion OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The firmware revision level of the device."
-    ::= { pduIdentEntry 5 }
-
-pduPartNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device part number."
-    ::= { pduIdentEntry 6 }
-
-pduSerialNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device serial number."
-    ::= { pduIdentEntry 7 }
-
-pduStatus OBJECT-TYPE
-    SYNTAX  INTEGER
-    {
-      other(1),    -- default
-      ok(2),
-      degraded(3),
-      failed(4)
-    }
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-    "The overall status of the device.  A value of OK(2) indicates the device is operating normally.
-    A value of degraded(3) indicates the device is operating with warning indicators.  A value of
-    failed(4) indicates the device is operating with critical indicators."
-    ::= { pduIdentEntry 8 }
-
-pduControllable OBJECT-TYPE
-    SYNTAX  INTEGER 
-    {
-      yes(1),
-      no(2)
-    }
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "This object indicates whether or not the device is controllable."
-    ::= { pduIdentEntry 9 }
-
--- ====================================================================================
---
---  pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}    
---  pduInput                OBJECT IDENTIFIER       ::= { pdu 2 }
---  PDU input group
---  OID= .1.3.6.1.4.1.232.165.2.2
-
-pduInputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF PduInputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-           "The Aggregate Object with number of entries equal to
-	    NumOfPdu and including the PduInput group."
-    ::= {pduInput 1}
-
-pduInputEntry OBJECT-TYPE
-    SYNTAX PduInputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION 
-           "The input table entry containing the voltage and 
-	    current for the PDU"
-    INDEX { pduInputIndex }
-    ::= { pduInputTable 1 }
-
-PduInputEntry ::= SEQUENCE {
-    pduInputIndex   INTEGER,
-    inputVoltage    INTEGER,
-    inputCurrent    INTEGER
-    }
-
-pduInputIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the PduInputEntry table."
-    ::= { pduInputEntry 1}
-
-inputVoltage OBJECT-TYPE
-    SYNTAX INTEGER  (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input voltage from the PDU meters in volts."
-    ::= {pduInputEntry 2}
-
-inputCurrent OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS 0.01 Amp
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input current from the PDU meters in hundredths of Amp."
-    ::= {pduInputEntry 3}
-
--- ====================================================================================
---
---  pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}  
---  pduOutput               OBJECT IDENTIFIER       ::= { pdu 3 }
---  PDU Output group
---  OID= .1.3.6.1.4.1.232.165.2.3
-
-pduOutputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF PduOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The Aggregate Object with number of entries equal to
-	    NumOfPdu and including the PduInput group."
-    ::= {pduOutput 1}
-
-pduOutputEntry OBJECT-TYPE
-    SYNTAX PduOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION 
-           "The input table entry containing the name,
-	    heat load, current load, power load, firmware, etc."
-    INDEX { pduOutputIndex }
-    ::= { pduOutputTable 1 }
-
-PduOutputEntry ::= SEQUENCE {
-    pduOutputIndex         INTEGER,
-    pduOutputLoad          INTEGER,
-    pduOutputHeat          INTEGER,
-    pduOutputPower         INTEGER,
-    pduOutputNumBreakers   INTEGER
-    }
-
-pduOutputIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the PduOutputEntry table."
-    ::= { pduOutputEntry 1}
-
-pduOutputLoad OBJECT-TYPE
-    SYNTAX INTEGER (0..200)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device output load in percent of rated capacity.  A value of -1 will be
-		returned if the heat load is unable to be measured."
-    ::= { pduOutputEntry 2 }
-
-pduOutputHeat OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units BTU
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    "The total heat load measured on the PDU in BTUs.  A value of -1 will be
-		returned if the heat load is unable to be measured."
-    ::= { pduOutputEntry 3 }
-
-pduOutputPower OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units Watts
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    "The total power load measured on the PDU in watts.  A value of -1 will be
-		returned if the power load is unable to be measured."
-    ::= { pduOutputEntry 4 }
-
-pduOutputNumBreakers OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The number of breakers for the device.  This variable indicates the number 
-           of rows in the breakers table."
-    ::= { pduOutputEntry 5 }
-
-pduOutputBreakerTable OBJECT-TYPE
-    SYNTAX  SEQUENCE OF PduOutputBreakerEntry
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-           "List of breaker table entries.  The number of entries is given by pduOutputNumBreakers ."
-    ::= { pduOutput 2 }
-
-pduOutputBreakerEntry OBJECT-TYPE
-    SYNTAX  PduOutputBreakerEntry 
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-           "An entry containing information applicable to an breaker."
-    INDEX   { pduOutputIndex, breakerIndex }
-    ::= { pduOutputBreakerTable 1 }
-
-PduOutputBreakerEntry ::=
-    SEQUENCE 
-    {
-      breakerIndex       INTEGER,
-      breakerVoltage     INTEGER,
-      breakerCurrent     INTEGER,
-      breakerPercentLoad INTEGER,
-      breakerStatus      INTEGER
-    }
-
-breakerIndex OBJECT-TYPE
-    SYNTAX  INTEGER 	(0..100)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The breaker identifier."
-    ::= { pduOutputBreakerEntry 1 }
-
-breakerVoltage OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS Volts
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The breaker voltage in volts."
-    ::= { pduOutputBreakerEntry 2 }
-
-breakerCurrent OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS 0.01 Amps
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The breaker current draw in hundredths of Amp."
-    ::= { pduOutputBreakerEntry 3 }
-
-breakerPercentLoad OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS Percent
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The breaker load in percent."
-    ::= { pduOutputBreakerEntry 4 }
-
-breakerStatus OBJECT-TYPE
-    SYNTAX  INTEGER 
-    {
-      normal(1),
-      overloadWarning(2),
-      overloadCritical(3),
-      voltageRangeWarning(4),
-      voltageRangeCritical(5)
-    }
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "This object indicates the status of the breaker.  A value of normal(1)
-		indicates the breaker is operating normally.  A value of overloadWarning(2)
-		indicates the breaker has an overload warning.  A value of overloadCritical(3)
-		indicates the breaker is overloaded.  A value of voltageRangeWarning(4)
-		indicates the breaker voltage is out of tolerance by 10-20%.  A value of
-		voltageRangeCritical(5) indicates the breaker voltage is out of tolerance
-		by more than 20%.  Note: Overload status has priority over voltage tolerance
-		status."
-    ::= { pduOutputBreakerEntry 5 }
-
-
--- ====================================================================================
---                            UPS
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsIdent                OBJECT IDENTIFIER       ::= { ups 1 }
---  UPS Identification group
---  OID= .1.3.6.1.4.1.232.165.3.1
-
-upsIdentManufacturer OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..31))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The UPS Manufacturer Name (e.g. Hewlett-Packard)."
-    ::= { upsIdent 1 }
-
-upsIdentModel OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The UPS Model;Part number;Serial number (e.g. HP R5500 XR;204451-B21;B00123456W)."
-    ::= { upsIdent 2 }
-
-upsIdentSoftwareVersions OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The firmware revision level(s) of the UPS microcontroller(s)."
-    ::= { upsIdent 3 }
-
-upsIdentOemCode OBJECT-TYPE
-    SYNTAX INTEGER (0..255)  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"A binary code indicating vendor. This should be a ?0x0c? for HP"
-    ::= { upsIdent 4 }
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsBattery              OBJECT IDENTIFIER       ::= { ups 2 }
---  UPS Battery group
---  OID= .1.3.6.1.4.1.232.165.3.2
-
-upsBatTimeRemaining OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS seconds
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery run time in seconds before UPS turns off due
-	 to low battery."
-    ::= { upsBattery 1 }
-
-upsBatVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Volts DC
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery voltage as reported by the UPS meters."
-    ::= { upsBattery 2 }
-
-upsBatCurrent OBJECT-TYPE
-    SYNTAX INTEGER (-2147483648..2147483647)   -- UNITS Amp DC
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery Current as reported by the UPS metering.
-	 Current is positive when discharging, negative
-	 when recharging the battery."
-    ::= { upsBattery 3 }
-
-upsBatCapacity OBJECT-TYPE
-    SYNTAX INTEGER (0..100)    -- UNITS percent
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery percent charge."
-    ::= { upsBattery 4 }
-
-upsBatteryAbmStatus OBJECT-TYPE
-    SYNTAX  INTEGER {
-    batteryCharging(1),
-    batteryDischarging(2),
-    batteryFloating(3),
-    batteryResting(4),
-    unknown(5)
-	}
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"Gives the status of the Advanced Battery Management;
-	 batteryFloating(3) status means that the charger is temporarily 
-	 charging the battery to its float voltage; batteryResting(4) is the 
-	 state when the battery is fully charged and none of the other actions 
-	 (charging/discharging/floating) is being done."
-    ::= { upsBattery 5 }
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsInput                OBJECT IDENTIFIER       ::= { ups 3 }
---  UPS Input group
---  OID= .1.3.6.1.4.1.232.165.3.3
-
-upsInputFrequency OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The utility line frequency in tenths of Hz."
-    ::= { upsInput 1 }
-
-upsInputLineBads OBJECT-TYPE
-    SYNTAX Counter
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of times the Input was out of tolerance
-	in voltage or frequency."
-    ::= { upsInput 2 }
-
-upsInputNumPhases OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    ::= { upsInput 3 }
-
-upsInputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF UpsInputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The Aggregate Object with number of entries equal to
-	         NumPhases and including the UpsInput group."
-    ::= { upsInput 4 }
-
-upsInputEntry OBJECT-TYPE
-    SYNTAX UpsInputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The input table entry containing the current, voltage, etc."
-    INDEX { upsInputPhase }
-    ::= { upsInputTable 1 }
-
-UpsInputEntry ::= SEQUENCE {
-    upsInputPhase     INTEGER,
-    upsInputVoltage   INTEGER,
-    upsInputCurrent   INTEGER,
-    upsInputWatts     INTEGER
-    }
-
-upsInputPhase OBJECT-TYPE
-    SYNTAX INTEGER  (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of the phase.  Serves as index for input table."
-    ::= { upsInputEntry 1 }
-
-upsInputVoltage OBJECT-TYPE
-    SYNTAX INTEGER  (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input voltage from the UPS meters in volts."
-    ::= { upsInputEntry 2 }
-
-upsInputCurrent OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input current from the UPS meters in amps."
-    ::= { upsInputEntry 3 }
-
-upsInputWatts OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input real power in watts. Most UPSs do not report
-         this XCP data"
-    ::= { upsInputEntry 4 }
-
-upsInputSource OBJECT-TYPE
-    SYNTAX  INTEGER {
-    other(1),
-
-    none(2),                	-- For example, Utility failure
-    primaryUtility(3),		-- Normal utility feed to the UPS
-    bypassFeed(4),          	-- Bypass utility, separate from primaryUtility
-    secondaryUtility(5),    	-- Secondary utility feed (on a dual AC input UPS)
-    generator(6),			-- Power provided by a generator
-    flywheel(7),			-- Power provided by a flywheel (not necessarily AC)
-    fuelcell(8) 			-- Power provided by fuel cell(s) (not necessarily AC)
-    }
-    ACCESS  read-only
-
-    STATUS  mandatory
-    DESCRIPTION
-	   "The present external source of input power.  The enumeration
-	       none(2) indicates that there is no external source of 
-	       power, for example, the UPS is On Battery (an internal source).
-	       The bypassFeed(4) can only be used when the Bypass source is known
-	       to be a separate utility feed than the primaryUtility(3)."
-    ::= { upsInput 5 }
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsOutput               OBJECT IDENTIFIER       ::= { ups 4 }
---  UPS Output group
---  OID= .1.3.6.1.4.1.232.165.3.4
-
-upsOutputLoad OBJECT-TYPE
-    SYNTAX INTEGER (0..200)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The UPS output load in percent of rated capacity."
-    ::= { upsOutput 1 }
-
-upsOutputFrequency OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured UPS output frequency in tenths of Hz."
-    ::= { upsOutput 2 }
-
-upsOutputNumPhases OBJECT-TYPE
-    SYNTAX INTEGER  (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of metered output phases, serves as the table
-	 index."
-    ::= { upsOutput 3 }
-
-upsOutputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF UpsOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-	"The Aggregate Object with number of entries equal to NumPhases
-	and including the UpsOutput group."
-    ::= { upsOutput 4 }
-
-upsOutputEntry OBJECT-TYPE
-    SYNTAX UpsOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-	"Output Table Entry containing voltage, current, etc."
-    INDEX { upsOutputPhase }
-    ::= { upsOutputTable 1 }
-
-UpsOutputEntry ::= SEQUENCE {
-    upsOutputPhase       INTEGER,
-    upsOutputVoltage     INTEGER,
-    upsOutputCurrent     INTEGER,
-    upsOutputWatts       INTEGER
-    }
-
-upsOutputPhase OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number {1..3} of the output phase."
-    ::= { upsOutputEntry 1 }
-
-upsOutputVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured output voltage from the UPS metering in volts."
-    ::= { upsOutputEntry 2 }
-
-upsOutputCurrent OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured UPS output current in amps."
-    ::= { upsOutputEntry 3 }
-
-upsOutputWatts OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured real output power in watts."
-    ::= { upsOutputEntry 4 }
-
-upsOutputSource OBJECT-TYPE
-    SYNTAX  INTEGER {
-    other(1),
-    none(2),
-    normal(3),				-- normal, single UPS module output
-    bypass(4),
-    battery(5),
-    booster(6),				-- Single or Double Boost, line-interactive UPSs only
-    reducer(7),				-- Buck, line-interactive UPSs only
-    parallelCapacity(8),		-- normal enhanced by Parallel for Capacity operation
-    parallelRedundant(9),		-- normal enhanced by Redundant Parallel operation
-    highEfficiencyMode(10)		-- normal enhanced by High Efficiency mode
-    }
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	   "The present source of output power.  The enumeration
-	       none(2) indicates that there is no source of output
-	       power (and therefore no output power), for example,
-	       the system has opened the output breaker."
-    ::= { upsOutput  5 }
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsBypass               OBJECT IDENTIFIER       ::= { ups 5 }
---  UPS Bypass group
---  OID= .1.3.6.1.4.1.232.165.3.5
-
-upsBypassFrequency OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The bypass frequency in tenths of Hz."
-    ::= { upsBypass 1 }
-
-upsBypassNumPhases OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of lines in the UPS bypass table."
-    ::= { upsBypass 2 }
-
-upsBypassTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF UpsBypassEntry
-    ACCESS not-accessible 
-    STATUS mandatory
-    ::= { upsBypass 3 }
-
-upsBypassEntry OBJECT-TYPE
-    SYNTAX UpsBypassEntry
-    ACCESS not-accessible 
-    STATUS mandatory
-    DESCRIPTION
-	"Entry in the UpsBypassTable."
-    INDEX { upsBypassPhase }
-    ::= { upsBypassTable  1 }
-
-UpsBypassEntry ::= SEQUENCE {
-    upsBypassPhase    INTEGER,
-    upsBypassVoltage  INTEGER
-    }
-
-upsBypassPhase OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Bypass Phase, index for the table."
-    ::= { upsBypassEntry 1 }
-
-upsBypassVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured UPS bypass voltage in volts."
-    ::= { upsBypassEntry 2 }
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsEnvironment          OBJECT IDENTIFIER       ::= { ups 6 }
---  UPS Environment group
---  OID= .1.3.6.1.4.1.232.165.3.6
-
-upsEnvAmbientTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the ambient temperature in the vicinity of the 
-        UPS or SNMP agent."
-    ::= { upsEnvironment  1 }
-
-upsEnvAmbientLowerLimit OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-       "The Lower Limit of the ambient temperature; if UpsEnvAmbientTemp 
-	falls below this value, the UpsAmbientTempBad alarm will occur."
-    ::= { upsEnvironment  2 }
-
-upsEnvAmbientUpperLimit OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-       "The Upper Limit of the ambient temperature; if UpsEnvAmbientTemp 
-	rises above this value, the UpsAmbientTempBad alarm will occur.
-	This value should be greater than UpsEnvAmbientLowerLimit."
-    ::= { upsEnvironment  3 }
-
-upsEnvAmbientHumidity OBJECT-TYPE
-    SYNTAX  INTEGER (0..100)   -- UNITS %
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the ambient humidity in the vicinity of the 
-        UPS or SNMP agent."
-    ::= { upsEnvironment  4 }
-
-upsEnvRemoteTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of a remote temperature sensor connected to the  
-        UPS or SNMP agent."
-    ::= { upsEnvironment  5 }
-
-upsEnvRemoteHumidity OBJECT-TYPE
-    SYNTAX  INTEGER (0..100)   -- UNITS %
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of a remote humidity sensor connected to the 
-        UPS or SNMP agent."
-    ::= { upsEnvironment  6 }
-
---
--- The Environmental Contact Sensing Table
---      Contains the table for monitoring all contacts (digital 
---      inputs).
---
-
-upsEnvNumContacts OBJECT-TYPE
-    SYNTAX  INTEGER (1..1024)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	   "The number of Contacts in the UpsContactsTable.
-		This object indicates the number of rows in the 
-		UpsContactsTable."
-    ::= { upsEnvironment  7 }
-
-upsContactsTable OBJECT-TYPE
-    SYNTAX  SEQUENCE OF UpsContactsTableEntry
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-	   "A list of Contact Sensing table entries.  
-		The number of entries is given by the value of 
-		UpsEnvNumContacts."
-    ::= { upsEnvironment  8 }
-
-upsContactsTableEntry OBJECT-TYPE
-    SYNTAX  UpsContactsTableEntry
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-	   "An entry containing information applicable 
-		to a particular Contact input."
-    INDEX   { upsContactIndex }
-    ::= { upsContactsTable  1 }
-
-UpsContactsTableEntry ::= SEQUENCE {
-    upsContactIndex     INTEGER,
-    upsContactType      INTEGER,
-    upsContactState     INTEGER,
-    upsContactDescr     DisplayString
-    }
-
-upsContactIndex OBJECT-TYPE
-    SYNTAX  INTEGER (1..1024)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	   "The Contact identifier; identical to the Contact Number."
-    ::= { upsContactsTableEntry  1 }
-
-upsContactType OBJECT-TYPE
-    SYNTAX  INTEGER {
-    normallyOpen(1),            -- or Input Normally High
-    normallyClosed(2),          -- or Input Normally Low
-    anyChange(3),               -- No normal Open/Closed state
-    notUsed(4)                  -- Contact not in service
-    }
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-	   "The normal state for this contact.  The 'other'
-	    state is the Active state for generating the UpstdContactActiveNotice
-	    trap.  If anyChange(3) is selected, then this trap is sent
-        any time the contact changes to either Open or Closed.
-        No traps are sent if the Contact is set to notUsed(4).
-        In many cases, the configuration for Contacts may be done by other 
-        means, so this object may be read-only."
-    ::= { upsContactsTableEntry  2 }
-
-upsContactState OBJECT-TYPE
-    SYNTAX  INTEGER {
-    open(1),
-    closed(2),
-    openWithNotice(3),
-    closedWithNotice(4)
-    }
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	   "The current state of the Contact input;
-		the value is based on the open/closed input state 
-		and the setting for UpsContactType.
-		When entering the openWithNotice(3) and closedWithNotice(4) 
-        states, no entries added to the UpsAlarmTable, but
-        the UpstdContactActiveNotice trap is sent."
-    ::= { upsContactsTableEntry  3 }
-
-upsContactDescr OBJECT-TYPE
-    SYNTAX  DisplayString (SIZE (0..63))
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-	   "A label identifying the Contact.  This object should be
-	    set by the administrator."
-    ::= { upsContactsTableEntry  4 }
-
-upsEnvRemoteTempLowerLimit OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-       "The Lower Limit of the remote temperature; if UpsEnvRemoteTemp 
-	falls below this value, the UpsRemoteTempBad alarm will occur."
-    ::= { upsEnvironment  9 }
-
-upsEnvRemoteTempUpperLimit OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-       "The Upper Limit of the remote temperature; if UpsEnvRemoteTemp 
-	rises above this value, the UpsRemoteTempBad alarm will occur.
-	This value should be greater than UpsEnvRemoteTempLowerLimit."
-    ::= { upsEnvironment  10 }
-
-upsEnvRemoteHumidityLowerLimit OBJECT-TYPE
-    SYNTAX  INTEGER (0..100)   -- UNITS %
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-       "The Lower Limit of the remote humidity reading; if UpsEnvRemoteHumidity
-	falls below this value, the UpsRemoteHumidityBad alarm will occur."
-    ::= { upsEnvironment  11 }
-
-upsEnvRemoteHumidityUpperLimit OBJECT-TYPE
-    SYNTAX  INTEGER (0..100)   -- UNITS %
-    ACCESS  read-write
-    STATUS  mandatory
-    DESCRIPTION
-       "The Upper Limit of the remote humidity reading; if UpsEnvRemoteHumidity 
-	rises above this value, the UpsRemoteHumidityBad alarm will occur.
-	This value should be greater than UpsEnvRemoteHumidityLowerLimit."
-    ::= { upsEnvironment  12 }
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsTest                 OBJECT IDENTIFIER       ::= { ups 7 }
---  UPS Test group
---  OID= .1.3.6.1.4.1.232.165.3.7
-
-
-upsTestBattery OBJECT-TYPE
-    SYNTAX INTEGER { startTest (1) }
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting this variable to startTest initiates the
-	 battery test.  All other set values are invalid."
-    ::= { upsTest 1 }
-
-upsTestBatteryStatus OBJECT-TYPE
-    SYNTAX INTEGER {
-    unknown (1),
-    passed (2),
-    failed (3),
-    inProgress (4),
-    notSupported (5),
-    inhibited (6),
-	scheduled (7)
-    }
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Reading this enumerated value gives an indication of the
-	 UPS Battery test status."
-    ::= { upsTest 2 }
-
-upsTestTrap OBJECT-TYPE
-    SYNTAX INTEGER { startTestTrap (1) }
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting startTestTrap to 1 will initiate a TrapTest
-	 is sent out from HPMM.  All other set values are invalid."
-    ::= { upsTest 3 }
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsControl              OBJECT IDENTIFIER       ::= { ups 8 }
---  UPS Control group
---  OID= .1.3.6.1.4.1.232.165.3.8
-
-
-upsControlOutputOffDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting this value to other than zero will cause the UPS
-	 output to turn off after the number of seconds.
-	 Setting it to 0 will cause an attempt to abort a pending
-	 shutdown."
-    ::= { upsControl 1 }
-
-upsControlOutputOnDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting this value to other than zero will cause the UPS
-	 output to turn on after the number of seconds.
-	 Setting it to 0 will cause an attempt to abort a pending
-	 startup."
-    ::= { upsControl 2 }
-
-upsControlOutputOffTrapDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"When UpsControlOutputOffDelay reaches this value, a trap will
-	 be sent."
-    ::= { upsControl 3 }
-
-upsControlOutputOnTrapDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS deprecated
-    DESCRIPTION
-	"When UpsControlOutputOnDelay reaches this value, a
-	 UpsOutputOff trap will be sent."
-    ::= { upsControl 4 }
-
-upsControlToBypassDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting this value to other than zero will cause the UPS
-	 output to go to Bypass after the number of seconds.
-		 If the Bypass is unavailable, this may cause the UPS
-		 to not supply power to the load.
-	 Setting it to 0 will cause an attempt to abort a pending
-	 shutdown."
-    ::= { upsControl 5 }
-
-upsLoadShedSecsWithRestart OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting this value will cause the UPS output to turn off 
-	 after the set number of seconds, then restart (after a UPS-defined
-	 'down time') when the utility is again available.  
-	 Unlike UpsControlOutputOffDelay, which might or might not,
-       this object always maps to the XCP 0x8A Load Dump & Restart command,
-       so the desired shutdown and restart behavior is guaranteed to happen.
-	 Once set, this command cannot be aborted.
-       This is the preferred Control object to use when performing an On
-       Battery OS Shutdown."
-    ::= { upsControl 6 }
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsConfig               OBJECT IDENTIFIER       ::= { ups 9 }
---  UPS Config group
---  OID= .1.3.6.1.4.1.232.165.3.9
-
-
-upsConfigOutputVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The nominal UPS Output voltage per phase in volts."
-    ::= { upsConfig 1 }
-
-upsConfigInputVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The nominal UPS Input voltage per phase in volts."
-    ::= { upsConfig 2 }
-
-upsConfigOutputWatts OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The nominal UPS available real power output in watts."
-    ::= { upsConfig  3}
-
-upsConfigOutputFreq OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The nominal output frequency in tenths of Hz."
-    ::= { upsConfig 4 }
-
-upsConfigDateAndTime OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..22))
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Date and time information for the UPS.  Setting this variable
-	 will initiate a set UPS date and time to this value.  Reading
-	 this variable will return the UPS time and date.  This value
-	 is not referenced to sysUpTime.  It is simply the clock value
-	 from the UPS real time clock.
-	 Format is as follows: MM/DD/YYYY:HH:MM:SS."
-    ::= { upsConfig 5 }
-
-upsConfigLowOutputVoltageLimit OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Lower limit for acceptable Output Voltage, per the UPS
-	 specifications."
-    ::= { upsConfig 6 }
-
-upsConfigHighOutputVoltageLimit OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Upper limit for acceptable Output Voltage, per the UPS
-	 specifications."
-    ::= { upsConfig 7 }
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsRecep                OBJECT IDENTIFIER       ::= { ups 10 }
---  UPS Recep group
---
---  (Note that the terms Receptacle, Outlet, and Load Group are used interchangeably
---  here and all mean "one of a set of controllable, power-switched outputs")
---  OID= .1.3.6.1.4.1.232.165.3.10
-
-
-upsNumReceptacles OBJECT-TYPE
-	SYNTAX INTEGER (0..64)
-	ACCESS read-only
-	STATUS mandatory
-    DESCRIPTION
-	"The number of independently controllable Receptacles, as described in the 
-	UpsRecepTable."
-	::= { upsRecep 1 }
-	
-upsRecepTable OBJECT-TYPE
-	SYNTAX SEQUENCE OF UpsRecepEntry
-	ACCESS not-accessible
-	STATUS mandatory
-	DESCRIPTION "The Aggregate Object with number of entries equal to
-		    NumReceptacles and including the UpsRecep group."
-	::={ upsRecep 2 }
-	
-upsRecepEntry OBJECT-TYPE
-	SYNTAX UpsRecepEntry
-	ACCESS not-accessible
-	STATUS mandatory
-	DESCRIPTION "The Recep table entry, etc."
-	INDEX { upsRecepIndex }
-	::= { upsRecepTable 1 }
-
-UpsRecepEntry ::= SEQUENCE {
-    upsRecepIndex                   INTEGER,
-    upsRecepStatus                  INTEGER,
-    upsRecepOffDelaySecs            INTEGER,
-    upsRecepOnDelaySecs             INTEGER,
-    upsRecepAutoOffDelay            INTEGER,
-    upsRecepAutoOnDelay             INTEGER,
-    upsRecepShedSecsWithRestart     INTEGER 
-	}
-	
-upsRecepIndex OBJECT-TYPE
-	SYNTAX INTEGER (1..64)
-	ACCESS read-only
-	STATUS mandatory
-	DESCRIPTION
-	"The number of the Receptacle. Serves as index for Receptacle table."
-	::= { upsRecepEntry 1 }
-	
-upsRecepStatus OBJECT-TYPE
-    SYNTAX INTEGER {
-		on(1), off(2), pendingOff(3), pendingOn(4), unknown(5) }
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-    "The Recep Status 1=On/Close, 2=Off/Open, 3=On w/Pending Off, 
-    4=Off w/Pending ON, 5=Unknown."
-	::={ upsRecepEntry 2 }		
-
-upsRecepOffDelaySecs OBJECT-TYPE
-    SYNTAX INTEGER (-1..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"The Delay until the Receptacle is turned Off.  Setting 
-	this value to other than -1 will cause the UPS output to 
-	turn off after the number of seconds (0 is immediately).  
-	Setting it to -1 will cause an attempt to abort a pending shutdown.
-	When this object is set while the UPS is On Battery, it is not necessary
-	to set UpsRecepOnDelaySecs, since the outlet will turn back on 
-	automatically when power is available again."
-	::= { upsRecepEntry 3 }
-
-upsRecepOnDelaySecs OBJECT-TYPE
-    SYNTAX INTEGER (-1..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	" The Delay until the Receptacle is turned On.  Setting 
-	this value to other than -1 will cause the UPS output to 
-	turn on after the number of seconds (0 is immediately).  
-	Setting it to -1 will cause an attempt to abort a pending restart."
-	::={ upsRecepEntry 4 }
-
-
-upsRecepAutoOffDelay OBJECT-TYPE
-    SYNTAX INTEGER (-1..32767)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"The delay after going On Battery until the Receptacle is 
-	automatically turned Off.  A value of -1 means that this Output should 
-	never be turned Off automatically, but must be turned Off only by command.
-	Values from 0 to 30 are valid, but probably innappropriate.
-	The AutoOffDelay can be used to prioritize loads in the event of a prolonged 
-	power outage; less critical loads will turn off earlier to extend battery 
-	time for the more critical loads. If the utility power is restored before the 
-	AutoOff delay counts down to 0 on an outlet, that outlet will not turn Off."
-	::= { upsRecepEntry 5 }
-	
-upsRecepAutoOnDelay OBJECT-TYPE
-    SYNTAX INTEGER (-1..32767)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Seconds delay after the Outlet is signaled to turn On before the Output is
-	Automatically turned ON. A value of -1 means that this Output should never
-	be turned On automatically, but only when specifically commanded to do so.
-	A value of 0 means that the Receptacle should come On immediately
-	at power-up or for an On command."
-	::= { upsRecepEntry 6 }
-
--- UpsRecepAutoOnDelay has three purposes: 
--- 1. To coordinate the automatic startup of various outlets, when the normal 
--- auto-sequencing of 1 second per outlet is not adequate. For example, they may 
--- be used to power up hard disk arrays before CPU units are started. 
--- 2. To force additional 'Down Time' during UpsRecepOffDelaySecs commands, for 
--- equipment to be reset, when the standard 'Down Time' is not long enough. 
--- 3. For the -1 value, to ensure that loads won?t be powered until commanded, 
--- following power-up or a UpsRecepOffDelaySecs command.
-
-upsRecepShedSecsWithRestart OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting this value will cause the UPS output to turn off 
-	 after the set number of seconds, then restart (after a UPS-defined
-	 'down time') when the utility is again available.  
-	 Unlike UpsRecepOffDelaySecs, which might or might not,
-       this object always maps to the XCP 0x8A Load Dump & Restart command,
-       so the desired shutdown and restart behavior is guaranteed to happen.
-	 Once set, this command cannot be aborted."
-    ::= { upsRecepEntry 7 }
-
-
-
--- ====================================================================================
---
---  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
---  upsTopology             OBJECT IDENTIFIER       ::= { ups 11 }
---  UPS Topology group
---  OID= .1.3.6.1.4.1.232.165.3.11
-
-
-upsTopologyType OBJECT-TYPE
-	SYNTAX INTEGER (0..32767)
-	ACCESS read-only
-	STATUS mandatory
-    DESCRIPTION
-	"Value which denotes the type of UPS by its power topology.  Values are the
-	same as those described in the XCP Topology block's Overall Topology field."
-	::= { upsTopology 1 }
-
-upsTopoMachineCode OBJECT-TYPE
-	SYNTAX INTEGER (0..32767)
-	ACCESS read-only
-	STATUS mandatory
-    DESCRIPTION
-  	"ID Value which denotes the Compaq/HP model of the UPS for software.  Values 
-	are the same as those described in the XCP Configuration block's Machine Code 
-	field."
-	::= { upsTopology 2 }
-
-upsTopoUnitNumber OBJECT-TYPE
-	SYNTAX INTEGER (0..64)
-	ACCESS read-only
-	STATUS mandatory
-    DESCRIPTION
-	"Identifies which unit and what type of data is being reported.
-	A value of 0 means that this MIB information comes from the top-level system 
-	view (eg, manifold module or system bypass cabinet reporting total system 
-	output).  Standalone units also use a value of 0, since they are the 'full 
-	system' view.
-	A value of 1 or higher indicates the number of the module in the system
-	which is reporting only its own data in the HP MIB objects."
-	::= { upsTopology 3 }
-
-upsTopoPowerStrategy OBJECT-TYPE
-    SYNTAX INTEGER {
-		highAlert(1), standard(2), enableHighEfficiency(3),
-		immediateHighEfficiency(4) }
-	ACCESS read-write
-	STATUS mandatory
-    DESCRIPTION
-	"Value which denotes which Power Strategy is currently set for the UPS.
-	The values are:
-	highAlert(1) - The UPS shall optimize its operating state to maximize its 
-			power-protection levels.  This mode will be held for at most 24 hours.
-	standard(2) - Balanced, normal power protection strategy. UPS will not enter 
-			HE operating mode from this setting.
-	enableHighEfficiency(3) - The UPS is enabled to enter HE operating mode to 
-			optimize its operating state to maximize its efficiency, when 
-			conditions change to permit it (as determined by the UPS).
-	forceHighEfficiency(4) - If this value is permitted to be Set for this UPS,
-			and if conditions permit, requires the UPS to enter High Efficiency 
-			mode now, without delay (for as long as utility conditions permit).
-			After successfully set to forceHighEfficiency(4), 
-			UpsTopoPowerStrategy changes to value enableHighEfficiency(3).
-	UpsOutputSource will indicate if the UPS status is actually operating in 
-	High Efficiency mode."
-	::= { upsTopology 4 }
-
--- ====================================================================================
---                        Power Distribution Rack
--- ====================================================================================
--- 
---  pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
---  pdrIdent                OBJECT IDENTIFIER       ::= { pdr 1 }
---  PDR identification group
---  OID= .1.3.6.1.4.1.232.165.4.1
-
-pdrName OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"The string identify the device."
-    ::= { pdrIdent 1 }
-
-pdrModel OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Model."
-    ::= { pdrIdent 2 }
-
-pdrManufacturer OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
-    ::= { pdrIdent 3 }
-
-pdrFirmwareVersion OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The firmware revision level of the device."
-    ::= { pdrIdent 4 }
-
-pdrPartNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device part number."
-    ::= { pdrIdent 5 }
-
-pdrSerialNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The PDR's serial number."
-    ::= { pdrIdent 6 }
-
-pdrVARating OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Volts-amps
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The VA Rating of this PDR (all phases)"
-    ::= { pdrIdent 7 }
-
-pdrNominalOutputVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The nominal Output Voltage may differ from the nominal 
-         Input Voltage if the PDR has an input transformer"
-    ::= { pdrIdent 8 }
-
-pdrNumPhases OBJECT-TYPE
-    SYNTAX INTEGER (1..3)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of phases for this PDR"
-    ::= { pdrIdent 9 }
-
-pdrNumPanels OBJECT-TYPE
-    SYNTAX INTEGER (0..100)  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of panels or subfeeds in this PDR"
-    ::= { pdrIdent 10 }
-
-pdrNumBreakers OBJECT-TYPE
-    SYNTAX INTEGER (0..100)  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of breakers in this PDR"
-    ::= { pdrIdent 11 }
-
--- ====================================================================================
---
---  pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
---  pdrPanel                OBJECT IDENTIFIER       ::= { pdr 2 }
---  PDR Panel Meters
---  OID= .1.3.6.1.4.1.232.165.4.2
-
-pdrPanelTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF PdrPanelEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "Aggregate Object with number of entries equal to
-	         pdrNumPanels"
-    ::= { pdrPanel 1 }
-
-pdrPanelEntry OBJECT-TYPE
-    SYNTAX PdrPanelEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION 
-           "The panel table entry containing all power parameters 
-            for each panel."
-    INDEX { pdrPanelIndex }
-    ::= { pdrPanelTable 1 }
-
-PdrPanelEntry ::= SEQUENCE {
-    pdrPanelIndex             INTEGER,
-    pdrPanelFrequency         INTEGER,
-    pdrPanelPower             INTEGER,
-    pdrPanelRatedCurrent      INTEGER,
-    pdrPanelMonthlyKWH        INTEGER,
-    pdrPanelYearlyKWH         INTEGER,
-    pdrPanelTotalKWH          INTEGER,
-    pdrPanelVoltageA          INTEGER,
-    pdrPanelVoltageB          INTEGER,
-    pdrPanelVoltageC          INTEGER,
-    pdrPanelCurrentA          INTEGER,
-    pdrPanelCurrentB          INTEGER,
-    pdrPanelCurrentC          INTEGER,
-    pdrPanelLoadA             INTEGER,
-    pdrPanelLoadB             INTEGER,
-    pdrPanelLoadC             INTEGER
-    }
-
-pdrPanelIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..10)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the pdrPanelEntry table."
-    ::= { pdrPanelEntry 1}
-
-pdrPanelFrequency OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS  0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The present frequency reading for the panel voltage."
-    ::= { pdrPanelEntry 2 }
-
-pdrPanelPower OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.1 KW
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The present power of the panel."
-    ::= { pdrPanelEntry 3 }
-
-pdrPanelRatedCurrent OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.1 A
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The present rated current of the panel."
-    ::= { pdrPanelEntry 4 }
-
-pdrPanelMonthlyKWH OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The accumulated KWH for this panel since the beginning of this 
-         calendar month or since the last reset."
-    ::= { pdrPanelEntry 5 }
-
-pdrPanelYearlyKWH OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The accumulated KWH for this panel since the beginning of this 
-         calendar year or since the last reset."
-    ::= { pdrPanelEntry 6 }
-
-pdrPanelTotalKWH OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The accumulated KWH for this panel since it was put into service 
-         or since the last reset."
-    ::= { pdrPanelEntry 7 }
-
-pdrPanelVoltageA OBJECT-TYPE
-    SYNTAX INTEGER  (0..2147483647)  -- UNITS 0.1 V
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured panel output voltage."
-    ::= {pdrPanelEntry 8}
-
-pdrPanelVoltageB OBJECT-TYPE
-    SYNTAX INTEGER  (0..2147483647)  -- UNITS 0.1 V
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured panel output voltage."
-    ::= {pdrPanelEntry 9}
-
-pdrPanelVoltageC OBJECT-TYPE
-    SYNTAX INTEGER  (0..2147483647)  -- UNITS 0.1 V
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured panel output voltage."
-    ::= {pdrPanelEntry 10}
-
-pdrPanelCurrentA OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 A
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured panel output current."
-    ::= {pdrPanelEntry 11}
-
-pdrPanelCurrentB OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 A
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured panel output current."
-    ::= {pdrPanelEntry 12}
-
-pdrPanelCurrentC OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 A
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured panel output current."
-    ::= {pdrPanelEntry 13}
-
-pdrPanelLoadA OBJECT-TYPE
-    SYNTAX INTEGER (0..200)  -- UNITS 0.1 percent
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The percentage of load is the ratio of each output 
-         current to the rated output current to the panel."
-    ::= {pdrPanelEntry 14}
-
-pdrPanelLoadB OBJECT-TYPE
-    SYNTAX INTEGER (0..200)  -- UNITS 0.1 percent
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The percentage of load is the ratio of each output  
-         current to the rated output current to the panel."
-    ::= {pdrPanelEntry 15}
-
-pdrPanelLoadC OBJECT-TYPE
-    SYNTAX INTEGER (0..200)  -- UNITS 0.1 percent
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The percentage of load is the ratio of each output  
-         current to the rated output current to the panel."
-    ::= {pdrPanelEntry 16}
-
-
--- ====================================================================================
---
---  pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
---  pdrBreaker              OBJECT IDENTIFIER       ::= { pdr 3 }
---  Based on physical installed Breakers
---  OID= .1.3.6.1.4.1.232.165.4.3
-
-pdrBreakerTable OBJECT-TYPE
-    SYNTAX  SEQUENCE OF PdrBreakerEntry
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-           "List of breaker table entries.  The number of entries 
-            is given by pdrNumBreakers for this panel."
-    ::= { pdrBreaker 1 }
-
-pdrBreakerEntry OBJECT-TYPE
-    SYNTAX  PdrBreakerEntry 
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-           "An entry containing information applicable to a
-            particular output breaker of a particular panel."
-    INDEX   { pdrPanelIndex, pdrBreakerIndex }
-    ::= { pdrBreakerTable 1 }
-
-PdrBreakerEntry ::= SEQUENCE {
-    pdrBreakerIndex           	INTEGER,
-    pdrBreakerPanel	      	INTEGER,
-    pdrBreakerNumPosition      	INTEGER,
-    pdrBreakerNumPhases       	INTEGER,
-    pdrBreakerNumSequence      	INTEGER,
-    pdrBreakerRatedCurrent    	INTEGER,
-    pdrBreakerMonthlyKWH      	INTEGER,
-    pdrBreakerYearlyKWH       	INTEGER,
-    pdrBreakerTotalKWH        	INTEGER,
-    pdrBreakerCurrent         	INTEGER,
-    pdrBreakerCurrentPercent  	INTEGER,
-    pdrBreakerPower           	INTEGER,
-    pdrBreakerPercentWarning    INTEGER,
-    pdrBreakerPercentOverload   INTEGER
-    }
-
-pdrBreakerIndex OBJECT-TYPE
-    SYNTAX  INTEGER 	(0..200)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The index of breakers. 42 breakers in each panel,
-            arranged in odd and even columns"
-    ::= { pdrBreakerEntry 1 }
-
-pdrBreakerPanel OBJECT-TYPE
-    SYNTAX  INTEGER	
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The index of panel that these breakers are installed on."
-    ::= { pdrBreakerEntry 2 }
-
-pdrBreakerNumPosition OBJECT-TYPE
-    SYNTAX  INTEGER	
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The position of this breaker in the panel, 1-phase breaker
-	    or n-m breaker for 2-phase or n-m-k breaker for 3-phase."
-    ::= { pdrBreakerEntry 3 }
-
-pdrBreakerNumPhases OBJECT-TYPE
-    SYNTAX  INTEGER	
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The number of phase for this particular breaker."
-    ::= { pdrBreakerEntry 4 }
-
-pdrBreakerNumSequence OBJECT-TYPE
-    SYNTAX  INTEGER	
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The sequence of this breaker. i.e. 1 for single phase
-	    1,2 for 2-phase or 1,2,3 for 3-phase."
-    ::= { pdrBreakerEntry 5 }
-
-pdrBreakerRatedCurrent OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS 0.1 A
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The rated current in Amps for this particular breaker."
-    ::= { pdrBreakerEntry 6 }
-
-pdrBreakerMonthlyKWH OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The accumulated KWH for this breaker since the beginning of this 
-         calendar month or since the last reset."
-    ::= { pdrBreakerEntry 7 }
-
-pdrBreakerYearlyKWH OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The accumulated KWH for this breaker since the beginning of this 
-         calendar year or since the last reset."
-    ::= { pdrBreakerEntry 8 }
-
-pdrBreakerTotalKWH OBJECT-TYPE
-    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"The accumulated KWH for this breaker since it was put into service 
-         or since the last reset."
-    ::= { pdrBreakerEntry 9 }
-
-pdrBreakerCurrent OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS 0.1 A
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured output current for this breaker Current."
-    ::= { pdrBreakerEntry 10 }
-
-pdrBreakerCurrentPercent OBJECT-TYPE
-    SYNTAX INTEGER (0..200)  -- UNITS 0.1 Percent
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The ratio of output current over rated 
-         current for each breaker."
-    ::= { pdrBreakerEntry 11 }
-
-pdrBreakerPower OBJECT-TYPE
-    SYNTAX INTEGER   -- UNITS Watts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The power for this breaker in Watts."
-    ::= { pdrBreakerEntry 12 }
-
-pdrBreakerPercentWarning OBJECT-TYPE
-    SYNTAX  INTEGER (0..200)	-- UNITS 0.1 Percent
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The percentage of Warning set for this breaker."
-    ::= { pdrBreakerEntry 13 }
-
-pdrBreakerPercentOverload OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS 0.1 Percent
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The percentage of Overload set for this breaker."
-    ::= { pdrBreakerEntry 14 }
-
--- ====================================================================================
---                         modular smart PDU
--- ====================================================================================
---
---  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}    
---  mpduIdent                OBJECT IDENTIFIER       ::= { mpdu 1 }
---  MPDU (or iPDU) identification group
---  OID= .1.3.6.1.4.1.232.165.5.1
-
-mpduNumMPDU OBJECT-TYPE
-    SYNTAX INTEGER
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of Modular PDUs (Core) detected."
-    ::= { mpduIdent 1 }
-    
-mpduIdentTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF MpduIdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "Indexed by mpduNumMPDU. So aggregate objects for each entry equal to mpduNumMPDU 
-                 before go to the next entry. i.e if 4 MPDU detected, display 4 indexes, 4 
-                 Manufacturers, 4 Models..., start with 1."
-    ::= { mpduIdent 2 }
-
-mpduIdentEntry OBJECT-TYPE
-    SYNTAX MpduIdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The table entry containing the identifications of each MPDU as well 
-                 as names of PDR panel, location of MPDU in a Data Center."
-    INDEX { mpduIdentIndex }
-    ::= { mpduIdentTable 1 }
-
-MpduIdentEntry ::= SEQUENCE {
-	mpduIdentIndex			INTEGER,
-	mpduManufacturer		DisplayString,
-	mpduModel			DisplayString,
-	mpduName			DisplayString,
-	mpduFirmwareVersion		DisplayString,
-	mpduHardwareVersion		DisplayString,
-	mpduPartNumber			DisplayString,
-	mpduSerialNumber		DisplayString,
-	mpduUUID			DisplayString,
-	mpduIP				DisplayString,
-	mpduMACAddress			DisplayString,
-	mpduControlStatus		DisplayString,
-	mpduRegion			DisplayString,
-	mpduType			DisplayString,
-	mpduPowerRating			DisplayString,
-	mpduInputRating			DisplayString,
-	mpduInputPlug			DisplayString,
-	mpduNumBreakers			INTEGER, 
-	mpduNumOutlet			INTEGER, 
-	mpduUHeight			INTEGER,
-	mpduRedundantStatus		DisplayString,
-	mpduNumSmartExtBar		INTEGER, 
-	mpduPanelName			DisplayString,
-	mpduPanelBreakerName		DisplayString,
-	mpduPanelBreakerRating		DisplayString,
-	mpduACFeedName			DisplayString,
-	mpduFloorName			DisplayString,
-	mpduRoomName			DisplayString,
-	mpduRow				DisplayString,
-	mpduRowPosition			DisplayString,
-	mpduRackName			DisplayString,
-        mpduRackHeight			DisplayString,
-        mpduRackID			DisplayString,
-	mpduUPosition			INTEGER,
-	mpduPairedPDUUUID		DisplayString,
-	mpduPairedPDUIP			DisplayString,
-	mpduInstalledLocation		INTEGER,
-      	mpduTotalPowerWatt		INTEGER,
-      	mpduTotalPowerVA  		INTEGER,
-      	mpduTotalPercentLoad    	INTEGER,
-        mpduRegionalNominalVoltage	DisplayString
-    }
-
-mpduIdentIndex OBJECT-TYPE
-    SYNTAX INTEGER (0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the MpduIdentEntry table. Start with 1"
-    ::= { mpduIdentEntry 1 }
-
-mpduManufacturer OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           " The Core PDU manufacturer. StringLength=[21]"
-    ::= { mpduIdentEntry 2 }
-
-mpduModel OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Core PDU model, marketing name. StringLength=[40]."
-    ::= { mpduIdentEntry 3 }
-
-mpduName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Core PDU name, descriptive name or hostname. StringLength=[16]."
-    ::= { mpduIdentEntry 4 }
-
-mpduFirmwareVersion OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Core PDU firmware version(s). StringLength=[12]."
-    ::= { mpduIdentEntry 5 }
-
-mpduHardwareVersion OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-            "The Core PDU hardware version. StringLength=[8]."
-    ::= { mpduIdentEntry 6 }
-
-mpduPartNumber OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Core PDU part number. StringLength=[21]."
-    ::= { mpduIdentEntry 7 }
-
-mpduSerialNumber OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU external serial number. StringLength=[21]."
-    ::= { mpduIdentEntry 8 }
-
-mpduUUID OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's UUID equals PN add SN. StringLength=[17]."
-    ::= { mpduIdentEntry 9 }
-
-mpduIP OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's assigned IP. StringLength=[16]."
-    ::= { mpduIdentEntry 10 }
-
-mpduMACAddress OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Core PDU MAC address. StringLength=[18]."
-    ::= { mpduIdentEntry 11 }
-
-mpduControlStatus OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Core PDU Control Status: master or slave units.
-              StringLength=[31]."
-    ::= { mpduIdentEntry 12 }
-
-mpduRegion OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's Region: NA, Intl, Japan... StringLength=[7]."
-    ::= { mpduIdentEntry 13 }
-
-mpduType OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's Type: Delta, Wye, single, Wye+lowline.
-            StringLength=[24]."
-    ::= { mpduIdentEntry 14 }
-
-mpduPowerRating OBJECT-TYPE
-    SYNTAX  DisplayString  
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's Power Rating in KVA (Name Plate). Value is presented 
-            in 1/100 of the KVA. i.e. 1750 means 17.50 KVA"
-    ::= { mpduIdentEntry 15 }
-
-mpduInputRating OBJECT-TYPE
-    SYNTAX  DisplayString  
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's Input Current Rating in A (Name Plate)"
-    ::= { mpduIdentEntry 16 }
-
-mpduInputPlug OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The PDU's Input Plug: IEC60309 516P6,NEMA L15-30P...
-             StringLength=[16]."
-    ::= { mpduIdentEntry 17 }
-
-mpduNumBreakers OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The number of breakers used in each MPDU (6 by default)."
-    ::= { mpduIdentEntry 18 }
-
-mpduNumOutlet OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The number of outlets of each MPDU (6 by default)."
-    ::= { mpduIdentEntry 19 }
-
-mpduUHeight OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The MPDU U Height 1U or 2 U (1U by default)."
-    ::= { mpduIdentEntry 20 }
-
-mpduRedundantStatus OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Status of Core PDU in paired or not: Stand-alone or Redundant.
-             StringLength=[12]."
-    ::= { mpduIdentEntry 21 }
-
-mpduNumSmartExtBar OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "total number of  detected Smart Sticks connecting to each PDU."
-    ::= { mpduIdentEntry 22 }
-
-mpduPanelName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Name of Panel that was entered by customer in GUI.
-             StringLength=[50]."
-    ::= { mpduIdentEntry 23 }
-
-mpduPanelBreakerName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Name of breakers or Panel Position entered by customer in GUI.
-             StringLength=[50]."
-    ::= { mpduIdentEntry 24 }
-
-mpduPanelBreakerRating OBJECT-TYPE
-    SYNTAX	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "Breaker rating of the PDR Panel."
-    ::= { mpduIdentEntry 25 }
-
-mpduACFeedName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "it would be A, B, Red, or White...
-             StringLength=[50]."
-    ::= { mpduIdentEntry 26 }
-
-mpduFloorName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Name of building floor entered by customer in GUI.
-             StringLength=[50]."
-    ::= { mpduIdentEntry 27 }
-
-mpduRoomName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Name of the room entered by customer in GUI. StringLength=[50]."
-    ::= { mpduIdentEntry 28 }
-
-mpduRow OBJECT-TYPE
-    SYNTAX	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "Data Center Row entered by customer in GUI.
-             StringLength=[11]."
-    ::= { mpduIdentEntry 29 }
-
-mpduRowPosition OBJECT-TYPE
-    SYNTAX	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "Position in Row entered by customer in GUI. Null will be returned 
-            if not detected. StringLength=[11]."
-    ::= { mpduIdentEntry 30 }
-
-mpduRackName OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Name of the Rack entered by customer in GUI. Null will be returned 
-            if not detected. StringLength=[50]."
-    ::= { mpduIdentEntry 31 }
-
-mpduRackHeight OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Rack Type (22U, 42U, 50U...). Null will be returned if not detected.
-             StringLength=[3]."
-    ::= { mpduIdentEntry 32 }
-
-mpduRackID OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "An unique ID to identify a rack, i.e. Rack SN. Null will be returned if 
-            not detected. StringLength=[50]."
-    ::= { mpduIdentEntry 33 }
-
-mpduUPosition OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "PDU Rack bottom U Start position, core U position. Null will be returned if not detected."
-    ::= { mpduIdentEntry 34 }
-
-mpduPairedPDUUUID OBJECT-TYPE
-    SYNTAX	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "UUID of the PDU paired with this one. Null will be returned if not detected.
-             StringLength=[50]."
-    ::= { mpduIdentEntry 35 }
-
-mpduPairedPDUIP OBJECT-TYPE
-    SYNTAX	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "IP address of the PDU paired with this one. Null will be returned if not detected.
-             StringLength=[16]."
-    ::= { mpduIdentEntry 36 }
-
-mpduInstalledLocation OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "0=Left 0U side area or rack frame, 1= Right 0U side area or rack frame, 2= front RETMA rail, 
-            3=back RETMA rail) - spatial location. A value of -1 will be returned if not detected."
-    ::= { mpduIdentEntry 37 }
-
-mpduTotalPowerWatt OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units Watts
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    	"The total power for the whole iPDU in Watts.  A value 
-         of -1 will be returned if the power is unable to be calculated."
-    ::= { mpduIdentEntry 38 }
-
-mpduTotalPowerVA OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units VA
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    	"The total power for the whole iPDU in VA.  A value 
-         of -1 will be returned if the power is unable to be calculated."
-    ::= { mpduIdentEntry 39 }
-
-mpduTotalPercentLoad OBJECT-TYPE
-    SYNTAX INTEGER   --UNITS 0.1 Percents
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The whole iPDU's load in percent of rated capacity. Value is 
-         presented in 1/10 of the percentage i.e. 125 is 12.5%.  A value 
-         of -1 will be returned if the current is unable to be measured."
-    ::= { mpduIdentEntry 40 }
-
-mpduRegionalNominalVoltage OBJECT-TYPE
-    SYNTAX  DisplayString  
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "value is either America(208V), Japan(202V) or blank for International Model"
-    ::= { mpduIdentEntry 41 }
-
--- ====================================================================================
---
---  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}      
---  mpduOutput               OBJECT IDENTIFIER       ::= { mpdu 2 }
---  MPDU (or iPDU) Output Measurements (6 Load Segments by default)
---  OID= .1.3.6.1.4.1.232.165.5.2
-
-mpduOutputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF MpduOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-           "Indexed by mpduNumOutlet. So aggregate objects for each entry equal to (mpduNumMPDU 
-            multiplies mpduNumOutlet) before go to the next entry. i.e if 4 MPDU detected, 
-            display 6x4 indexes, 6x4 OutputStatus, 6x4 OutputBreakerRating...start with 1."
-    ::= { mpduOutput 1 }
-
-mpduOutputEntry OBJECT-TYPE
-    SYNTAX MpduOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION 
-           "The output table entry containing the voltage, current, PF,
-            percent load, VA, Watts for the Modular PDU."
- 
-    INDEX { mpduIdentIndex, mpduOutputIndex }
-    ::= { mpduOutputTable 1 }
-
-MpduOutputEntry ::= SEQUENCE {
-      mpduOutputIndex  			INTEGER,
-      mpduOutputStatus    		DisplayString,
-      mpduOutputBreakerRating  		INTEGER,
-      mpduOutputSmartDevice		DisplayString,
-      mpduOutputPercentLoad    		INTEGER,
-      mpduOutputVoltage    		INTEGER,
-      mpduOutputCurrent   		INTEGER,
-      mpduOutputPowerVA	    		INTEGER,
-      mpduOutputPowerWatt      		INTEGER,
-      mpduOutputPowerFactor    		INTEGER,
-      mpduOutputWarningThreshold    	INTEGER,
-      mpduOutputCriticalThreshold    	INTEGER,
-      mpduOutputPowerWattHour 		INTEGER
-    }
-
-mpduOutputIndex OBJECT-TYPE
-    SYNTAX INTEGER  (0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the MpduOutputEntry table."
-    ::= { mpduOutputEntry 1 }
-
-mpduOutputStatus OBJECT-TYPE
-    SYNTAX  	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-    "The overall status of the device: off, on, problem. StringLength=[7]."
-    ::= { mpduOutputEntry 2 }
-
-mpduOutputBreakerRating OBJECT-TYPE
-    SYNTAX	INTEGER    --UNITS A
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The rating of each MPDU Output in Ampere."
-    ::= { mpduOutputEntry 3 }
-
-mpduOutputSmartDevice OBJECT-TYPE
-    SYNTAX	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "A smart cord device detected: False, True. StringLength=[5]."
-    ::= { mpduOutputEntry 4 }
-
-mpduOutputPercentLoad OBJECT-TYPE
-    SYNTAX INTEGER	 --UNITS 0.1 Percents
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The MPDU's each output load in percent of rated capacity. Value is 
-         presented in 1/10 of the percentage i.e. 125 is 12.5%.  A value 
-         of -1 will be returned if the current is unable to be measured."
-    ::= { mpduOutputEntry 5 }
-
-mpduOutputVoltage OBJECT-TYPE
-    SYNTAX INTEGER    -- UNITS RMS 0.1 Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured output voltage from the PDU meters in volts. Value is 
-         presented in 1/10 of the Volt i.e. 2095 is 209.5 V.  A value 
-         of -1 will be returned if the voltage is unable to be measured."
-    ::= { mpduOutputEntry 6 }
-
-mpduOutputCurrent OBJECT-TYPE
-    SYNTAX INTEGER    -- UNITS RMS 0.01 Amp
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured output current from the PDU meters in amps. Value is 
-         presented in 1/100 of the Ampere i.e. 175 is 1.75 A.  A value 
-         of -1 will be returned if the current is unable to be measured."
-    ::= { mpduOutputEntry 7 }
-
-mpduOutputPowerVA OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units VA
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    	"The total VA load (VI) measured on the PDU in VA.  A value 
-         of -1 will be returned if the power is unable to be calculated."
-    ::= { mpduOutputEntry 8 }
-
-mpduOutputPowerWatt OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units Watts
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    	"The total power load measured on the PDU in Watts.  A value 
-         of -1 will be returned if the power is unable to be calculated."
-    ::= { mpduOutputEntry 9 }
-
-mpduOutputPowerFactor OBJECT-TYPE
-    SYNTAX INTEGER    -- 0.01 UNITS
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The power factor is presented in 1/100 of the unit i.e.
-         98 is 0.98.  A value of -1 will be returned if the power factor is unable 
-         to be measured."
-    ::= { mpduOutputEntry 10 }
-
-mpduOutputWarningThreshold OBJECT-TYPE
-    SYNTAX INTEGER    -- Percents
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Report the User-set threshhold limit for Warning in percentage"
-    ::= { mpduOutputEntry 11 }
-
-mpduOutputCriticalThreshold OBJECT-TYPE
-    SYNTAX INTEGER    -- Percents
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Report the User-set threshhold limit for Critical in percentage"
-    ::= { mpduOutputEntry 12 }
-
-mpduOutputPowerWattHour OBJECT-TYPE
-    SYNTAX  INTEGER   -- Units Watt-Hour (WH)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-    	"Support Billing Grade Energy Metering in Watt-Hour.  A value 
-         of -1 will be returned if the power is unable to be calculated."
-    ::= { mpduOutputEntry 13 }
-
-
--- ====================================================================================
---  
---  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}    
---  mpduDeviceIdent          OBJECT IDENTIFIER       ::= { mpdu 3 }
---  ID of all Devices (power extension bars, servers) connected to MPDU Core's outlets
---  Smart Devices are those blades/servers/storage encl with smart power cord
---  OID= .1.3.6.1.4.1.232.165.5.3
-
-    
-mpduDeviceIdentTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF MpduDeviceIdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "Indexed by mpduNumOutlet. So aggregate objects for each entry equal 
-                 to (mpduNumMPDU multiplies mpduNumOutlet) before go to the next entry. 
-                 i.e if 4 MPDU detected, display 6x4 indexes, 6x4 mpduDeviceStatus, 6x4 
-                 DeviceUIDStatus...start with 1."
-    ::= { mpduDeviceIdent 1 }
-
-mpduDeviceIdentEntry OBJECT-TYPE
-    SYNTAX MpduDeviceIdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The ident table entry containing the name, model, 
-                 manufacturer, firmware version, part number... for
-                 each smart device, null value for unknown device."
-
-    INDEX { mpduIdentIndex, mpduDeviceIdentIndex }
-    ::= { mpduDeviceIdentTable 1 }
-
-MpduDeviceIdentEntry ::= SEQUENCE {
-      mpduDeviceIdentIndex         INTEGER,
-      mpduDeviceStatus             DisplayString,
-      mpduDeviceUIDStatus          DisplayString,
-      mpduDeviceNumOutlet          INTEGER,
-      mpduDeviceUHeight            INTEGER,
-      mpduDevicePowerRating        DisplayString,
-      mpduDeviceManufacturer       DisplayString,
-      mpduDeviceType		   DisplayString,
-      mpduDeviceModel              DisplayString,
-      mpduDeviceName               DisplayString,
-      mpduDeviceFirmwareVersion    DisplayString,
-      mpduDeviceHardwareVersion    DisplayString,
-      mpduDevicePartNumber         DisplayString,
-      mpduDeviceSerialNumber       DisplayString,
-      mpduDeviceUUID		   DisplayString,
-      mpduDeviceIP	           DisplayString,
-      mpduDeviceMAC	           DisplayString,
-      mpduDevicePSUSlotNo          INTEGER,
-      mpduDeviceUPosition          INTEGER,
-      mpduDeviceDetectionThreshold INTEGER
-     }
-
-mpduDeviceIdentIndex OBJECT-TYPE
-    SYNTAX INTEGER  (0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index is based on the total number of Smart Extension Bars plus
-         smart devices (with smart power cord i.e. blades) detected."
-    ::= { mpduDeviceIdentEntry 1 }
-
-mpduDeviceStatus OBJECT-TYPE
-    SYNTAX  	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-    "The overall status of the device: off, on, problem. StringLength=[8]."
-    ::= { mpduDeviceIdentEntry 2 }
-
-mpduDeviceUIDStatus OBJECT-TYPE
-    SYNTAX  	DisplayString
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-    "The overall status of the device UID: off, on, blink. StringLength=[8]."
-    ::= { mpduDeviceIdentEntry 3 }
-
-mpduDeviceNumOutlet OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The number of outlets of detected the device.  This variable 
-            indicates the number of rows in the breakers table. Default is 5"
-    ::= { mpduDeviceIdentEntry 4 }
-
-mpduDeviceUHeight OBJECT-TYPE
-    SYNTAX	INTEGER		--UNITS 0.01
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "The Unit height of ext bar or device. Some device supports non-integer. 
-            Present value x100, when read back, divided by 100 to get 2 decimal points."
-    ::= { mpduDeviceIdentEntry 5 }
-
-mpduDevicePowerRating OBJECT-TYPE
-    SYNTAX DisplayString 
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device's Power Rating in VA. Null will be returned if not detected.
-         StringLength=[8]."
-    ::= { mpduDeviceIdentEntry 6 }
-
-mpduDeviceManufacturer OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Manufacturer Name (e.g. Hewlett-Packard).
-	 Null will be returned if not detected. StringLength=[16]."
-    ::= { mpduDeviceIdentEntry 7 }
-
-mpduDeviceType OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device's Type: Ext Bar, server, or network device...
-          StringLength=[16]."
-    ::= { mpduDeviceIdentEntry 8 }
-
-mpduDeviceModel OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Model is Managed or Non-managed Ext Bar. 
-         Null will be returned if not detected. StringLength=[24]."
-    ::= { mpduDeviceIdentEntry 9 }
-
-mpduDeviceName OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The string identify the Device. i.e. 'BAR#1' (descriptive name)
-         Null will be returned if not detected. StringLength=[32]."
-    ::= { mpduDeviceIdentEntry 10 }
-
-mpduDeviceFirmwareVersion OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The firmware revision level of Sm Ext Bar. Null will be returned if 
-         not detected. StringLength=[8]."
-    ::= { mpduDeviceIdentEntry 11 }
-
-mpduDeviceHardwareVersion OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The hardware version of Sm Ext Bar. Null will be returned if not 
-         detected. StringLength=[8]."
-    ::= { mpduDeviceIdentEntry 12 }
-
-mpduDevicePartNumber OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device's part number. Null will be returned if not detected.
-          StringLength=[21]."
-    ::= { mpduDeviceIdentEntry 13 }
-
-mpduDeviceSerialNumber OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device's serial number. Null will be returned if not detected.
-          StringLength=[21]."
-    ::= { mpduDeviceIdentEntry 14 }
-
-mpduDeviceUUID OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device's UUID. Null will be returned if not detected.
-          StringLength=[37]."
-    ::= { mpduDeviceIdentEntry 15 }
-
-mpduDeviceIP OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device's IP Address. Null will be returned if not detected.
-          StringLength=[16]."
-    ::= { mpduDeviceIdentEntry 16 }
-
-mpduDeviceMAC OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device mgmt processor MAC Address. Null will be returned if 
-         not detected. StringLength=[18]."
-    ::= { mpduDeviceIdentEntry 17 }
-
-mpduDevicePSUSlotNo OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "Device power supply logical slot number."
-    ::= { mpduDeviceIdentEntry 18 }
-
-mpduDeviceUPosition OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "Device U start position."
-    ::= { mpduDeviceIdentEntry 19 }
-
-mpduDeviceDetectionThreshold OBJECT-TYPE
-    SYNTAX	INTEGER   -- UNITS .001 Amp
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "Read device detection threshold between 10 and 50mA."
-    ::= { mpduDeviceIdentEntry 20 }
-
-
--- ====================================================================================
---
---  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}    
---  mpduSmExtBarOutlet       OBJECT IDENTIFIER       ::= { mpdu 4 }
---  Outputs measurements for each Smart Extension Bar's Outlet and
---  Identification of Smart Device connected to Smart Extension Bar.
---  OID= .1.3.6.1.4.1.232.165.5.4
-
-
-mpduSmExtBarOutletTable OBJECT-TYPE
-    SYNTAX  SEQUENCE OF MpduSmExtBarOutletEntry
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-           "Indexed by mpduDeviceNumOutlet. So aggregate objects for each entry equal to 
-            (mpduNumMPDU multiplies mpduNumOutlet multiplies mpduDeviceNumOutlet) before 
-            go to the next entry. i.e if 4 MPDU detected, display 5x6x4 indexes, 5x6x4
-            mpduSmExtBarOutletStatus, 5x6x4 mpduSmExtBarOutletUIDStatus...start with 1."
-    ::= { mpduSmExtBarOutlet 1 }
-
-mpduSmExtBarOutletEntry OBJECT-TYPE
-    SYNTAX  MpduSmExtBarOutletEntry 
-    ACCESS  not-accessible
-    STATUS  mandatory
-    DESCRIPTION
-           "Entries contain status, measurements for each outlet (no PowerVA)
-            Display null if it can't be measured or no device detected."
-    INDEX   { mpduIdentIndex, mpduOutputIndex, mpduSmExtBarOutletIndex }
-    ::= { mpduSmExtBarOutletTable 1 }
-
-MpduSmExtBarOutletEntry ::= SEQUENCE {
-	mpduSmExtBarOutletIndex       		  INTEGER,
-      	mpduSmExtBarOutletStatus      		  DisplayString,
-      	mpduSmExtBarOutletUIDStatus      	  DisplayString,
-      	mpduSmExtBarOutletRating   		  INTEGER,
-      	mpduSmExtBarOutletVoltage     		  INTEGER,
-      	mpduSmExtBarOutletCurrent     		  INTEGER,
-      	mpduSmExtBarOutletPowerWatt     	  INTEGER,
-      	mpduSmExtBarOutletPowerFactor   	  INTEGER,
-      	mpduSmExtBarOutletDeviceName      	  DisplayString,    
-      	mpduSmExtBarOutletDeviceUUID      	  DisplayString,
-      	mpduSmExtBarOutletDeviceProduct   	  DisplayString,
-      	mpduSmExtBarOutletDeviceIP		  DisplayString,
-      	mpduSmExtBarOutletAutoDiscovered  	  INTEGER,
-      	mpduSmExtBarOutletDeviceMAC		  DisplayString,    
-      	mpduSmExtBarOutletDeviceSN        	  DisplayString,    
-      	mpduSmExtBarOutletDevicePSSlotNo  	  INTEGER,
-      	mpduSmExtBarOutletDeviceUPosition	  INTEGER,
-      	mpduSmExtBarOutletDeviceUHeight		  INTEGER,
-      	mpduSmExtBarOutletDeviceInstalledLocation INTEGER,
-        mpduSmExtBarOutletPowerWattHour     	  INTEGER
-    }
-
-mpduSmExtBarOutletIndex OBJECT-TYPE
-    SYNTAX  INTEGER  (0..100)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Index of Smart Extension Bar."
-    ::= { mpduSmExtBarOutletEntry 1 }
-
-mpduSmExtBarOutletStatus OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The overall status of the Smart Extension Bar's outlet: off, on, problem...
-             StringLength=[3]."
-    ::= { mpduSmExtBarOutletEntry 2 }
-
-mpduSmExtBarOutletUIDStatus OBJECT-TYPE
-    SYNTAX  DisplayString
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The overall status of the Smart Extension Bar's UID: off, on, blink...
-             StringLength=[8]."
-    ::= { mpduSmExtBarOutletEntry 3 }
-
-mpduSmExtBarOutletRating OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS A
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Sm Ext Bar Outlet's Rating in Amp.  A value of -1 will be returned 
-            if the stick is unable to detect. StringLength=[8]."
-    ::= { mpduSmExtBarOutletEntry 4 }
-
-mpduSmExtBarOutletVoltage OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS 0.1 Volts
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The SM Ext Bar voltage in volts. Value is presented 1/10 of the Volt 
-            i.e. 2098 means 209.8 V.  A value of -1 will be returned if the voltage is unable 
-            to be measured."
-    ::= { mpduSmExtBarOutletEntry 5 }
-
-mpduSmExtBarOutletCurrent OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS 0.01 Amps
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The SM Ext Bar current draw in Amps. Value is presented in 1/100 of the Ampere
-          i.e. 127 means 1.27 A.  A value of -1 will be returned if the current is unable 
-           to be measured."
-    ::= { mpduSmExtBarOutletEntry 6 }
-
-mpduSmExtBarOutletPowerWatt OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS Watts
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Sm Ext Bar's Power measured in Watts. A value of -1 will be returned if the 
-            power is unable to be measured."
-    ::= { mpduSmExtBarOutletEntry 7 }
-
-mpduSmExtBarOutletPowerFactor OBJECT-TYPE
-    SYNTAX  INTEGER    -- 0.01 UNITS
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The outlet's power factor in 0.01 unit. It is presented in 1/100 of the unit. 
-          i.e. 98 means 0.98.  A value of -1 will be returned if the voltage is unable 
-            to be measured."
-    ::= { mpduSmExtBarOutletEntry 8 }
-
-mpduSmExtBarOutletDeviceName OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) Name that connects to this 
-         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[50]."
-    ::= { mpduSmExtBarOutletEntry 9 }
-
-mpduSmExtBarOutletDeviceUUID OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) UUID that connects to this 
-         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[37]."
-    ::= { mpduSmExtBarOutletEntry 10 }
-
-mpduSmExtBarOutletDeviceProduct OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) Model that connects to this 
-         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[40]."
-    ::= { mpduSmExtBarOutletEntry 11 }
-
-mpduSmExtBarOutletDeviceIP OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) IP of iLO that connects to this 
-         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[16]."
-    ::= { mpduSmExtBarOutletEntry 12 }
-
-mpduSmExtBarOutletAutoDiscovered OBJECT-TYPE
-    SYNTAX  INTEGER    
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Boolean values of 0 or 1. 1 means this Sm Ext Bar Outlet is able to get information 
-            from a blade with smart power supply (auto discovery is enabled)..."
-    ::= { mpduSmExtBarOutletEntry 13 }
-
-mpduSmExtBarOutletDeviceMAC OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) MAC address that connects to this 
-         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[18]."
-    ::= { mpduSmExtBarOutletEntry 14 }
-
-mpduSmExtBarOutletDeviceSN OBJECT-TYPE
-    SYNTAX DisplayString  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) Serial Number that connects to this 
-         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[21]."
-    ::= { mpduSmExtBarOutletEntry 15 }
-
-mpduSmExtBarOutletDevicePSSlotNo OBJECT-TYPE
-    SYNTAX INTEGER  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device (Blade/Server/Storage) Power Supply' Slot Number that connects to this 
-         Sm Ext Bar Outlet. A value of -1 will be returned if not detected."
-    ::= { mpduSmExtBarOutletEntry 16 }
-
-
-mpduSmExtBarOutletDeviceUPosition OBJECT-TYPE
-    SYNTAX  INTEGER   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Device U start position. A value of -1 will be returned if not detected."
-    ::= { mpduSmExtBarOutletEntry 17 }
-
-mpduSmExtBarOutletDeviceUHeight OBJECT-TYPE
-    SYNTAX  INTEGER  	--UNITS 0.01
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "Device U height. Enter -1 if not detected. Some device supports non-integer. 
-            Present value x100, when read back, divided by 100 to get 2 decimal points."
-    ::= { mpduSmExtBarOutletEntry 18 }
-
-mpduSmExtBarOutletDeviceInstalledLocation OBJECT-TYPE
-    SYNTAX	INTEGER
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-           "0=Left 0U side area or rack frame, 1= Right 0U side area or rack frame, 2= front RETMA rail, 
-            3=back RETMA rail) - spatial location. A value of -1 will be returned if not detected."
-    ::= { mpduSmExtBarOutletEntry 19 }
-
-mpduSmExtBarOutletPowerWattHour OBJECT-TYPE
-    SYNTAX  INTEGER	-- UNITS Watt-Hour (WH)
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "The Sm Ext Bar's Power measured in Watt-Hour support Billing Grade Energy Metering. 
-            A value of -1 will be returned if the power is unable to be measured."
-    ::= { mpduSmExtBarOutletEntry 20 }
-
-
-
--- ====================================================================================
---				OFFLINE UPS
--- ====================================================================================
---
--- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
--- oupsIdent                OBJECT IDENTIFIER       ::= { oups 1 }
--- Offline UPS - UPS Identification
--- OID= .1.3.6.1.4.1.232.165.6.1
-
-oupsIdentManufacturer OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..31))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The UPS Manufacturer Name (e.g. Hewlett-Packard)."
-    ::= { oupsIdent 1 }
-
-oupsIdentModel OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The UPS Model such as R-1500 G3."
-    ::= { oupsIdent 2 }
-
-oupsIdentSystemFWVersion OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Display System firmware version."
-    ::= { oupsIdent 3 }
-
-oupsIdentPowerModuleFWVersion OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Display Power Module firmware version."
-    ::= { oupsIdent 4 }
-
-oupsIdentOemCode OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"A binary code indicating vendor. This should be a ?0x0c? for HP"
-    ::= { oupsIdent 5 }
-
-oupsIdentSerialNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))  
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Get the UPS Serial Number (i.e. B00123456W)."
-    ::= { oupsIdent 6 }
-
-oupsIdentPartNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Get the UPS Part Number (i.e. 204451-B21)."
-    ::= { oupsIdent 7 }
-
-
--- ====================================================================================
---
--- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
--- oupsBattery              OBJECT IDENTIFIER       ::= { oups 2 }
--- Offline UPS - Battery Parameters
--- OID= .1.3.6.1.4.1.232.165.6.2
-
-oupsBatTimeRemaining OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS seconds
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery run time in seconds before UPS turns off due
-	 to low battery."
-    ::= { oupsBattery 1 }
-
-oupsBatVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Volts DC
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Read the Total Battery voltage."
-    ::= { oupsBattery 2 }
-
-oupsBatCapacity OBJECT-TYPE
-    SYNTAX INTEGER (0..100)    -- UNITS percent
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery percent charge."
-    ::= { oupsBattery 3 }
-
-oupsBatAbmStatus OBJECT-TYPE
-    SYNTAX  INTEGER {
-      batteryCharging(1),	--(include Battery Boosting and Battery Floating)
-      batteryDischarging(2),
-      batteryResting(3),
-      batteryTesting(4),
-      notAvailable(5)		--(ACC mode, no BP connected)
-	}
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	"Gives the status of the Advanced Battery Management; example:
-	 batteryResting(3) is the state when the battery is fully charged and none of 
-         the other actions (charging/discharging/floating) is being done."
-    ::= { oupsBattery 4 }
-
-oupsBatTestStatus OBJECT-TYPE
-    SYNTAX INTEGER {
-       unknown(1),     
-       passed(2),
-       failed(3),
-       inProgress(4),
-       notSupported(5),
-       inhibited(6)
-          }
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Battery Test Status. UPS will support schedule testing only
-         7, 14, 30, or 60 days. Default is 14 days."
-    ::= { oupsBattery 5 }
-
-oupsBatLatestTestDate OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Get time and date of the latest battery test."
-    ::= { oupsBattery  6 }
-
-oupsBatReplacementDateBP1 OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Get the battery replacement date of BP1."
-    ::= { oupsBattery  7 }
-
-oupsBatReplacementDateBP2 OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Get the battery replacement date of BP2."
-    ::= { oupsBattery  8 }
-
-oupsBatToACDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..150)    -- UNITS ms
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Get delay time switching from Battery mode to AC mode in ms.
-        Default is 0ms, unit is increased per 100ms"
-    ::= { oupsBattery  9 }
-
-oupsBatChargeDelay OBJECT-TYPE
-    SYNTAX INTEGER (0..9999)    -- UNITS seconds
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Get battery charge delay in second. Default is 0 (random)
-        unit is increased per 10sec."
-    ::= { oupsBattery  10 }
-
-oupsBatNumModules OBJECT-TYPE
-    SYNTAX INTEGER (0..2)   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Number of battery modules detected by power unit."
-    ::= { oupsBattery  11 }
-
-oupsBatModel OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Report 1U, 2U, or 3U Battery Pack, both BPs must be the same model."
-    ::= { oupsBattery  12 }
-
-oupsBatChargingPowerLevelUtility OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "3 charging power levels: 1100W, 555W, 190W."
-    ::= { oupsBattery  13 }
-
-oupsBatChargingPowerLevelGenerator OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "4 charging power levels: 1100W, 555W, 190W, No Charge."
-    ::= { oupsBattery  14 }
-
-oupsBatSharedConfig OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "expect 3 values for shared BP configuration: PU single, PU master, PU slave."
-    ::= { oupsBattery  15 }
-
-oupsBatPackFWVerBP1 OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Display Battery Pack 1 FW version."
-    ::= { oupsBattery  16 }
-
-oupsBatPackFWVerBP2 OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))   
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Display Battery Pack 2 FW version."
-    ::= { oupsBattery  17 }
-
-
--- ====================================================================================
---
--- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
--- oupsInput                OBJECT IDENTIFIER       ::= { oups 3 }
--- Offline UPS - Input Parameters
--- OID= .1.3.6.1.4.1.232.165.6.3
-
-
-oupsInputFrequency OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The utility line frequency in tenths of Hz."
-    ::= { oupsInput 1 }
-
-oupsInputLineBads OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of times the Input was out of tolerance
-	in voltage or frequency."
-    ::= { oupsInput 2 }
-
-oupsInputNumPhases OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    ::= { oupsInput 3 }
-
-oupsInputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF OupsInputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "Aggregate Object with number of entries equal to
-	         NumPhases and including the UpsInput group."
-    ::= { oupsInput 4 }
-
-oupsInputEntry OBJECT-TYPE
-    SYNTAX OupsInputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The input table entry containing the current, voltage, etc."
-    INDEX { oupsInputPhase }
-    ::= { oupsInputTable 1 }
-
-OupsInputEntry ::= SEQUENCE {
-    oupsInputPhase        INTEGER,
-    oupsInputVoltage      INTEGER,
-    oupsInputCurrent      INTEGER,
-    oupsInputWatts        INTEGER
-    }
-
-oupsInputPhase OBJECT-TYPE
-    SYNTAX INTEGER  (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of the phase. Serves as index for input table."
-    ::= { oupsInputEntry 1 }
-
-oupsInputVoltage OBJECT-TYPE
-    SYNTAX INTEGER  (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input voltage from the UPS meters in volts."
-    ::= { oupsInputEntry 2 }
-
-oupsInputCurrent OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input current from the UPS meters in amps."
-    ::= { oupsInputEntry 3 }
-
-oupsInputWatts OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured input power in watts."
-    ::= { oupsInputEntry 4 }
-
-oupsInputPowerFactor OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- 0.01 UNITS
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured real Input power factor with 2 decimals."
-    ::= { oupsInput 5 }
-
-oupsInputDBType OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	 "Read the input Distribution Box type: 1- 480V-Y (US-5W NEMA plugs),
-          2- 480V-V (US-5W IEC plugs), 3- 415V-Y (EURO-5W IEC plugs),
-          4- 415V-Y (US/INTL-5W IEC plugs), 5- 380V-Y (China-5W hardwired)."
-    ::= { oupsInput 6 }
-
-oupsInputUpperVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..999)  -- UNITS in V
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Read the upper voltage range, 5 to 10 percent above the nominal voltage.
-         Factory default is 10 percent."
-    ::= { oupsInput 7 }
-
-oupsInputLowerVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..999)  -- UNITS in V
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Read the lower voltage range, 5 to 15 percent below the nominal voltage.
-         Factory default is -15 percent."
-    ::= { oupsInput 8 }
-
-oupsGeneratorDetection OBJECT-TYPE
-    SYNTAX INTEGER { 
-    onGenerator(1),    -- ATS sets 1 to tell generator is switched on
-    offGenerator(2),   -- ATS sets 2 to tell generator is switched off
-    noAction(3)        -- set 3 for no action (default)
-    }
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"ATS sets a value of 1 to signal UPS that a generator is started so the UPS will  
-         charge Battery Pack using a different setting while it's on generator (intent to 
-         save all power to back up for the load)."
-    ::= { oupsInput 9 }
-
-oupsInputWithGenerator OBJECT-TYPE
-    SYNTAX INTEGER {
-    woGenerator(1), 		-- Input Source is on Utility only (know for sure no Gen)
-    withGenerator(2)		-- Input Source could be from Utility or Generator
-    }
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"A value of 1 when user known for sure Input has no Generator backup; a value
-         of 2 tells Input Source could be from either Utility or Generator."
-    ::= { oupsInput 10 }
-
-
--- ====================================================================================
---
--- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
--- oupsOutput               OBJECT IDENTIFIER       ::= { oups 4 }
--- Offline UPS Output Parameters
--- OID= .1.3.6.1.4.1.232.165.6.4
-
-oupsOutputLoad OBJECT-TYPE
-    SYNTAX INTEGER (0..200)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The total UPS output load in percentage of rated capacity."
-    ::= { oupsOutput 1 }
-
-oupsOutputFrequency OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured UPS output frequency in tenths of Hz."
-    ::= { oupsOutput 2 }
-
-oupsOutputNumPhases OBJECT-TYPE
-    SYNTAX INTEGER  (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of metered output phases, serves as the table index."
-    ::= { oupsOutput 3 }
-
-oupsOutputTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF OupsOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-	"The Aggregate Object with number of entries equal to NumPhases
-	and including the UpsOutput group."
-    ::= { oupsOutput 4 }
-
-oupsOutputEntry OBJECT-TYPE
-    SYNTAX OupsOutputEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-	"Output Table Entry containing voltage, current, etc."
-    INDEX { oupsOutputPhase }
-    ::= { oupsOutputTable 1 }
-
-OupsOutputEntry ::= SEQUENCE {
-    oupsOutputPhase       	INTEGER,
-    oupsOutputVoltage     	INTEGER,
-    oupsOutputCurrent     	INTEGER,
-    oupsOutputWatts       	INTEGER,
-    oupsOutputLoadPerPhase	INTEGER
-    }
-
-oupsOutputPhase OBJECT-TYPE
-    SYNTAX INTEGER (0..6)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number {1..3} of the output phase."
-    ::= { oupsOutputEntry 1 }
-
-oupsOutputVoltage OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured output voltage from the UPS metering in volts."
-    ::= { oupsOutputEntry 2 }
-
-oupsOutputCurrent OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured UPS output current in amps."
-    ::= { oupsOutputEntry 3 }
-
-oupsOutputWatts OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured real output power in watts."
-    ::= { oupsOutputEntry 4 }
-
-oupsOutputLoadPerPhase OBJECT-TYPE
-    SYNTAX INTEGER (0..200)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The UPS output load per phase in percentage of rated capacity."
-    ::= { oupsOutputEntry 5 }
-
-oupsOutputPowerFactor OBJECT-TYPE
-    SYNTAX INTEGER (0..2147483647)  -- 0.01 UNITS
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The measured real output power factor with 2 decimals."
-    ::= { oupsOutput 5 }
-
-oupsOutputSource OBJECT-TYPE
-    SYNTAX  INTEGER {
-    acSource(1),           	-- Either from Utility or Generator
-    battery(2)                	-- Power comes from Battery Source
-    }
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-	   "Indicate the source that UPS operating from when providing output."
-    ::= { oupsOutput 6 }
-
-
--- ====================================================================================
---
--- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
--- oupsMonitor              OBJECT IDENTIFIER       ::= { oups 5 }
--- Offline UPS Control Parameters
--- OID= .1.3.6.1.4.1.232.165.6.5
-
-oupsMonitorAmbientTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS in F
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the internal PU Ambient temperature."
-    ::= { oupsMonitor  1 }
-
-oupsMonitorBypassSCRTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS in F
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the internal PU Bypass SCR temperature."
-    ::= { oupsMonitor  2 }
-
-oupsMonitorDDTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS in F
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the internal PU DD temperature."
-    ::= { oupsMonitor  3 }
-
-oupsMonitorInverterTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS in F
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the internal PU DD temperature."
-    ::= { oupsMonitor  4 }
-
-oupsMonitorChargerTemp OBJECT-TYPE
-    SYNTAX  INTEGER (-100..200)   -- UNITS in F
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the internal PU Charger temperature."
-    ::= { oupsMonitor  5 }
-
-oupsMonitorBP1Temp OBJECT-TYPE
-    SYNTAX  DisplayString (SIZE (0..63))   -- UNITS in F
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Display Battery Pack 1 Temeprature in F. If BP1 not connected the PU will
-        return 255 and displayed as -not connect-"
-    ::= { oupsMonitor  6 }
-
-oupsMonitorBP2Temp OBJECT-TYPE
-    SYNTAX  DisplayString (SIZE (0..63))   -- UNITS in F  
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Display Battery Pack 2 Temperature in F. If BP2 not connected the PU will
-        return 255 and displayed as -not connect-"
-    ::= { oupsMonitor  7 }
-
-oupsMonitorRestartDelay OBJECT-TYPE
-    SYNTAX  INTEGER (1..150)  -- UNITS in ms
-    ACCESS  read-only     --the last 2 digit SN is the default ms delay
-    STATUS  mandatory
-    DESCRIPTION
-       "The reading of the AC Turn On Delay (Restart Delay). The value can be
-        changed via front LCD Menu or inserted Module GUI. Default is 0ms, unit is 
-        increased per 100ms."
-    ::= { oupsMonitor  8 }
-
-oupsMonitorACCLoadLevel OBJECT-TYPE
-    SYNTAX  DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Read the set load level that ACC would be active from 0 to this percentage. 
-        Default is 20 percent. Select 0 to set it as Always On"
-    ::= { oupsMonitor  9 }
-
-oupsMonitorOperatingMode OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Check if UPS is normal op, or on bypass, on inverter or ACC Active, "
-    ::= { oupsMonitor  10 }
-
-oupsMonitorOperationType OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-       "Check if UPS is operating as an UPS or ACC (PU only, no BP)."
-    ::= { oupsMonitor  11 }
-
-oupsTestTrap OBJECT-TYPE
-    SYNTAX INTEGER { startTestTrap (1) }
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"Setting startTestTrap to 1 will initiate a TrapTest
-	 is sent out from Management Module.  All other set values are invalid."
-    ::= { oupsMonitor 12 }
-
-oupsOnGenDuration OBJECT-TYPE
-    SYNTAX INTEGER {
-                   for30Min (1),
-                   for1Hr (2),
-		   for2Hr (3),			
-                   for4Hr (4)
-                   }
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"When read, show the current On-Generator Duration set by user on UPS LCD or GUI ."
-    ::= { oupsMonitor 13 }
-
-oupsRuntimeLimitation OBJECT-TYPE
-    SYNTAX INTEGER {
-                   disable (1),
-                   enable (2)
-                   }
-
-    ACCESS read-write
-    STATUS mandatory
-    DESCRIPTION
-	"show the current setting for Runtime Limitation. When enable, it can last for 70sec or 3min."
-    ::= { oupsMonitor 14 }
-
-
--- ====================================================================================
---
---  oups                    OBJECT IDENTIFIER       ::= {cpqPower 6}  
---  oupsRackDiscovery	    OBJECT IDENTIFIER       ::= { ups 6 }
---  Offline UPS Rack Discovery. Location of the PU and BP installed in a rack
---  1-wire contact reading the U-Height and U-Position of each enclosure
---  OID= .1.3.6.1.4.1.232.165.6.6
-
-
-oupsRackTagVersion OBJECT-TYPE
-	SYNTAX INTEGER (0..10)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the 1-wire contact FW version from EEPROM's Tag Version. Initial tag is 01"
-	::= { oupsRackDiscovery 1 }
-
-oupsRackID OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..63))
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get 10-digit Serial Number from the Location Discovery Strip mount in the front of the rack"
-	::= { oupsRackDiscovery 2 }
-
-oupsRackPartNumber OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..63))
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get 10 or 12-digit Part Number xxxxxx-001 from the Location Discovery Strip mount in the front of the rack"
-	::= { oupsRackDiscovery 3 }
-
-oupsRackProductDescription OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..63))
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get spatial data of rack: description of the Rack Name."
-	::= { oupsRackDiscovery 4 }
-
-oupsRackEncULocation OBJECT-TYPE
-	SYNTAX DisplayString (SIZE (0..63))
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Tell where the Location Discovery Strip is mounted in the rack. B for Back, F for Front, L for Left 
-         and R for Right."
-	::= { oupsRackDiscovery 5 }
-
-oupsRackUHeight OBJECT-TYPE
-	SYNTAX INTEGER (0..50)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get spatial data of rack: U-height of the rack can be 36U, 42U, or 47U model."
-	::= { oupsRackDiscovery 6 }
-
-oupsRackPUUPosition OBJECT-TYPE
-	SYNTAX INTEGER (0..50)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the U-position of the PU where it is installed in the rack. The U position range is from 1-50."
-	::= { oupsRackDiscovery 7 }
-
-oupsRackPUUHeight OBJECT-TYPE
-	SYNTAX INTEGER (0..10)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the U-Height of the Power Unit. PU height is either 1U or 2U."
-	::= { oupsRackDiscovery 8 }
-
-oupsRackBP1UPosition OBJECT-TYPE
-	SYNTAX INTEGER (0..50)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the U-Position of the Battery Pack 1, installed right below the PU.
-         Range is from 1 to 50."
-	::= { oupsRackDiscovery 9 }
-
-oupsRackBP1UHeight OBJECT-TYPE
-	SYNTAX INTEGER (0..10)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the U-Height of the BP 1. BP is either 1U, 2U, and 3U"
-	::= { oupsRackDiscovery 10 }
-
-oupsRackBP2UPosition OBJECT-TYPE
-	SYNTAX INTEGER (0..50)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the U-Position of the Battery Pack 2, installed right below the BP1.
-         Range is from 1 to 50."
-	::= { oupsRackDiscovery 11 }
-
-oupsRackBP2UHeight OBJECT-TYPE
-	SYNTAX INTEGER (0..10)
-	ACCESS read-only
-	STATUS mandatory
-    	DESCRIPTION
-	"Get the U-Height of the BP 2. BP is either 1U, 2U, and 3U"
-	::= { oupsRackDiscovery 12 }
-
-
--- ====================================================================================
---             PDU2 GLANDORE - Group (breaker) monitored (no outlet monitored)
---             PDU2 DRAGONWOOD1 (GLANDORE2) - Group (breaker) and Outlet monitored
--- ====================================================================================
---  
---  pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
---  pdu2Ident                OBJECT IDENTIFIER       ::= { pdu2 1 }
---  PDU identification group
---  OID= .1.3.6.1.4.1.232.165.7.1
-
-pdu2NumberPDU OBJECT-TYPE
-    SYNTAX INTEGER (1..2)	-- pdu(0) master or pdu(1) slave1...
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The number of PDUs detected (in its daisy chain)."
-    ::= { pdu2Ident 1 }
-    
-pdu2IdentTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF Pdu2IdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "Aggregate Object with number of entries equal to pdu2NumberPDU ."
-    ::= { pdu2Ident 2 }
-
-pdu2IdentEntry OBJECT-TYPE
-    SYNTAX Pdu2IdentEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "The ident table entry containing the name, model, manufacturer, 
-                 firmware version, part number, etc."
-    INDEX { pdu2IdentIndex }
-    ::= { pdu2IdentTable 1 }
-
-Pdu2IdentEntry ::= SEQUENCE {
-      	pdu2IdentIndex         	INTEGER,
-      	pdu2Name               	DisplayString,
-      	pdu2Model              	DisplayString,
-      	pdu2Manufacturer       	DisplayString,
-      	pdu2FirmwareVersion    	DisplayString,
-      	pdu2PartNumber         	DisplayString,
-      	pdu2SerialNumber       	DisplayString,
-      	pdu2Status             	INTEGER,
-      	pdu2Controllable       	INTEGER,
-      	pdu2InputPhaseCount	INTEGER,
-	pdu2GroupCount		INTEGER,
-        pdu2OutletCount	 	INTEGER    
-    }
-
-pdu2IdentIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the Pdu2IdentEntry table."
-    ::= { pdu2IdentEntry 1 }
-
-pdu2Name OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The string identify the device in daisy chain. Example PDU A."
-    ::= { pdu2IdentEntry 2 }
-
-pdu2Model OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Model."
-    ::= { pdu2IdentEntry 3 }
-
-pdu2Manufacturer OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
-    ::= { pdu2IdentEntry 4 }
-
-pdu2FirmwareVersion OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The firmware revision level of the device."
-    ::= { pdu2IdentEntry 5 }
-
-pdu2PartNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device part number. Example AF400A."
-    ::= { pdu2IdentEntry 6 }
-
-pdu2SerialNumber OBJECT-TYPE
-    SYNTAX DisplayString (SIZE (0..63))
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"The device serial number, 10- or 16-digit."
-    ::= { pdu2IdentEntry 7 }
-
-pdu2Status OBJECT-TYPE
-    SYNTAX  INTEGER
-    {
-      other(1),    -- default
-      ok(2),
-      degraded(3),
-      failed(4)
-    }
-    ACCESS	read-only
-    STATUS	mandatory
-    DESCRIPTION
-    "The overall status of the device.  A value of OK(2) indicates the device is operating normally.
-    A value of degraded(3) indicates the device is operating with warning indicators.  A value of
-    failed(4) indicates the device is operating with critical indicators."
-    ::= { pdu2IdentEntry 8 }
-
-pdu2Controllable OBJECT-TYPE
-    SYNTAX  INTEGER 
-    {
-      yes(1),
-      no(2)
-    }
-    ACCESS  read-only
-    STATUS  mandatory
-    DESCRIPTION
-           "This object indicates whether or not the device is controllable."
-    ::= { pdu2IdentEntry 9 }
-
-pdu2InputPhaseCount  OBJECT-TYPE
-    SYNTAX     INTEGER (0..63)
-    ACCESS     read-only
-    STATUS     mandatory
-    DESCRIPTION 
-     	"The number of input phase on this pdu 1,2,3."
-    ::= { pdu2IdentEntry 10 }
-
-pdu2GroupCount  OBJECT-TYPE
-    SYNTAX     INTEGER (0..63)
-    ACCESS     read-only
-    STATUS     mandatory
-    DESCRIPTION 
-	"The number of groups (breakers) on this pdu."
-    ::= { pdu2IdentEntry 11 }
-
-pdu2OutletCount  OBJECT-TYPE
-    SYNTAX     INTEGER (0..63)
-    ACCESS     read-only
-    STATUS     mandatory
-    DESCRIPTION 
-	"The number of outlets in this PDU."
-         ::= { pdu2IdentEntry 12 }
-
-
--- ====================================================================================
---
---  pdu2                    OBJECT IDENTIFIER       ::= {cpqPower 7}    
---  pdu2Input               OBJECT IDENTIFIER       ::= { pdu2 2 }
---  PDU2 input group
---  OID= .1.3.6.1.4.1.232.165.7.2
-
-pdu2InputTable  OBJECT-TYPE
-	SYNTAX SEQUENCE OF Pdu2InputEntry
-	ACCESS     not-accessible
-	STATUS     mandatory
-	DESCRIPTION 
-		"Aggregate Object with number of entries equal to pdu2NumberPDU ."
-	::= { pdu2Input 1 }
-
-pdu2InputEntry  OBJECT-TYPE
-	SYNTAX 	Pdu2InputEntry
-	ACCESS     not-accessible
-	STATUS     mandatory
-	DESCRIPTION 
-		"The ident table entry containing the VA, Watts, WH, etc."
-	INDEX { pdu2IdentIndex }
-	::= { pdu2InputTable 1 }
-
-Pdu2InputEntry ::= SEQUENCE {
-	pdu2InputType			INTEGER,
-	pdu2InputFrequency		INTEGER,
-	pdu2InputFrequencyStatus	INTEGER,
-	pdu2InputPowerVA		INTEGER,
-	pdu2InputPowerWatts		INTEGER,
-	pdu2InputPowerWattHour		INTEGER,
-	pdu2InputPowerWattHourTimer	DisplayString,
-	pdu2InputPowerFactor		INTEGER,
-	pdu2InputPowerVAR		INTEGER
-}
-
-pdu2InputType  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		singlePhase (1),
-		splitPhase (2),
-		threePhaseDelta (3),
-		threePhaseWye (4)
-	}
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Type of input - single phase, split phase, three phase delta, or three
-				phase wye."
-	::= { pdu2InputEntry 1 }
-
-pdu2InputFrequency  OBJECT-TYPE
-	SYNTAX     INTEGER (0..2147483647) -- UNITS RMS 0.1 Hz
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"The measured input frequency from the PDU meters in tenths of Hz."
-	::= { pdu2InputEntry 2 }
-
-pdu2InputFrequencyStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		outOfRange (2)
-	}
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Status of the measured input frequency relative to the nominal frequency and the admitted tolerance."
-	::= { pdu2InputEntry 3 }
-
-pdu2InputPowerVA  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A total input VA of all phases.  Units are VA.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputEntry 4 }
-
-pdu2InputPowerWatts  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A total input Watts of all phases.  Units are Watts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputEntry 5 }
-
-pdu2InputPowerWattHour  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A total input Watt-Hour value for all phases.  Units are WH. This value can be reset to 0 
-                using GUI. In that case, the pdu2InputPowerWattHourTimer will be reset as well  
-                A negative value indicates that this object is not available."
-	::= { pdu2InputEntry 6 }
-
-pdu2InputPowerWattHourTimer  OBJECT-TYPE
-	SYNTAX     DisplayString (SIZE (0..22))  -- display Date Time
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A Timestamp of when the Total Input WH was last reset."
-	::= { pdu2InputEntry 7 }
-
-pdu2InputPowerFactor  OBJECT-TYPE
-	SYNTAX     INTEGER	-- units 0.01
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"An input PF value.  Units are in thousandths, for example a power factor
-		 of 0.958 would be returned as 958, and 0.92 would be returned as 920.  
-                 A negative value indicates that this object is not available."
-	::= { pdu2InputEntry 8 }
-
-pdu2InputPowerVAR  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"An input VAR value.  Units are VAR.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputEntry 9 }
-
-
-pdu2InputPhaseTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF Pdu2InputPhaseEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION
-           "Aggregate Object with number of entries equal to number of PDUs (pdu2NumberPDU) and
-            number of input phase (pdu2InputPhaseCount)."
-    ::= {pdu2Input 2}
-
-pdu2InputPhaseEntry OBJECT-TYPE
-    SYNTAX Pdu2InputPhaseEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION 
-           "The input table entry containing the voltage, current, frequency, power for each phase.
-            Entries are given with number of pdu and number of input phase 1, 2, or 3."
-    INDEX { pdu2IdentIndex, pdu2InputPhaseIndex }
-    ::= { pdu2InputPhaseTable 1 }
-
-Pdu2InputPhaseEntry ::= SEQUENCE {
-      pdu2InputPhaseIndex      			INTEGER,
-      pdu2InputPhaseVoltageMeasType  		INTEGER,
-      pdu2InputPhaseVoltage    			INTEGER,
-      pdu2InputPhaseVoltageThStatus  		INTEGER,
-      pdu2InputPhaseVoltageThLowerWarning  	INTEGER,
-      pdu2InputPhaseVoltageThLowerCritical  	INTEGER,
-      pdu2InputPhaseVoltageThUpperWarning  	INTEGER,
-      pdu2InputPhaseVoltageThUpperCritical  	INTEGER,
-      pdu2InputPhaseCurrentMeasType		INTEGER,
-      pdu2InputPhaseCurrentRating		INTEGER,
-      pdu2InputPhaseCurrent    			INTEGER,
-      pdu2InputPhaseCurrentThStatus		INTEGER,
-      pdu2InputPhaseCurrentThLowerWarning	INTEGER,
-      pdu2InputPhaseCurrentThLowerCritical	INTEGER,
-      pdu2InputPhaseCurrentThUpperWarning	INTEGER,
-      pdu2InputPhaseCurrentThUpperCritical	INTEGER,
-      pdu2InputPhaseCurrentCrestFactor		INTEGER,
-      pdu2InputPhaseCurrentPercentLoad		INTEGER,
-      pdu2InputPhasePowerMeasType		INTEGER,
-      pdu2InputPhasePowerVA			INTEGER,
-      pdu2InputPhasePowerWatts 			INTEGER,
-      pdu2InputPhasePowerWattHour		INTEGER,
-      pdu2InputPhasePowerWattHourTimer		DisplayString,
-      pdu2InputPhasePowerFactor			INTEGER,
-      pdu2InputPhasePowerVAR			INTEGER
-    }
-
-pdu2InputPhaseIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the Pdu2InputEntry table."
-    ::= { pdu2InputPhaseEntry 1}
-
-pdu2InputPhaseVoltageMeasType  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		singlePhase (1),
-		phase1toN (2),
-		phase2toN (3),
-		phase3toN (4),
-		phase1to2 (5),
-		phase2to3 (6),
-		phase3to1 (7)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Value indicates what input voltage is being measured in this table row - single phase
-		voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2,
-		phase 2 to phase 3, or phase 3 to phase 1."
-	::= { pdu2InputPhaseEntry 2 }
-
-pdu2InputPhaseVoltage OBJECT-TYPE
-    SYNTAX   INTEGER    -- UNITS RMS 0.001 Volts
-    ACCESS   read-only
-    STATUS   mandatory
-    DESCRIPTION
-	"An input voltage measurement value.  Units are millivolts."
-    ::= {pdu2InputPhaseEntry 3}
-
-pdu2InputPhaseVoltageThStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Status of the measured input voltage relative to the configured thresholds."
-	::= { pdu2InputPhaseEntry 4 }
-
-pdu2InputPhaseVoltageThLowerWarning  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 5 }
-
-pdu2InputPhaseVoltageThLowerCritical  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 6 }
-
-pdu2InputPhaseVoltageThUpperWarning  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 7 }
-
-pdu2InputPhaseVoltageThUpperCritical  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 8 }
-
-pdu2InputPhaseCurrentMeasType  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		singlePhase (1),
-		neutral (2),
-		phase1 (3),
-		phase2 (4),
-		phase3 (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Which input wire is being measured in this table row - single phase, neutral, phase 1,
-		phase 2, or phase 3."
-	::= { pdu2InputPhaseEntry 9 }
-
-pdu2InputPhaseCurrentRating  OBJECT-TYPE
-	SYNTAX   INTEGER		-- Units in 0.001 A
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Rated current capacity of the input.  A negative value indicates that
-		the hardware current capacity is unknown.  Units are milliamps."
-	::= { pdu2InputPhaseEntry 10 }
-
-pdu2InputPhaseCurrent  OBJECT-TYPE
-	SYNTAX   INTEGER		-- Units in 0.001 A
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"An input current measurement value.  Units are milliamps."
-	::= { pdu2InputPhaseEntry 11 }
-
-pdu2InputPhaseCurrentThStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Status of the measured input current relative to the configured thresholds."
-	::= { pdu2InputPhaseEntry 12 }
-
-pdu2InputPhaseCurrentThLowerWarning  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..100000)		-- Units in 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 13 }
-
-pdu2InputPhaseCurrentThLowerCritical  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..100000)		-- Units in 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 14 }
-
-pdu2InputPhaseCurrentThUpperWarning  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..100000)		-- Units in 0.001 A
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 15 }
-
-pdu2InputPhaseCurrentThUpperCritical  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..100000)		-- Units in 0.001 A
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 16 }
-
-pdu2InputPhaseCurrentCrestFactor  OBJECT-TYPE
-	SYNTAX     INTEGER		-- Units in 0.001
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Current crest factor.  Units are in milli, for example a crest factor of
-                  1.414 will be returned as 1414.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 17 }
-
-pdu2InputPhaseCurrentPercentLoad  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Current percent load, based on the rated current capacity.  Units are
-                  percentage, for example 80% will be returned as 80.  A negative
-                  value indicates that this object is not available."
-	::= { pdu2InputPhaseEntry 18 }
-
-pdu2InputPhasePowerMeasType  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		singlePhase (1),
-		neutral (2),
-		phase1 (3),
-		phase2 (4),
-		phase3 (5)
-	 }
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Which input wire is being measured in this table row - single phase, neutral, phase 1,
-		phase 2, or phase 3."
-	::= { pdu2InputPhaseEntry 19 }
-
-pdu2InputPhasePowerVA  OBJECT-TYPE
-	SYNTAX    INTEGER
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"An input VA value.  Units are VA.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 20 }
-
-pdu2InputPhasePowerWatts  OBJECT-TYPE
-	SYNTAX    INTEGER
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"An input Watts value.  Units are Watts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 21 }
-
-pdu2InputPhasePowerWattHour  OBJECT-TYPE
-	SYNTAX     INTEGER 
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A Watt-Hour value for each Input phase.  Units are WH. This value can be reset to 0 
-                 using GUI. In that case, the pdu2InputPhasePowerWattHourTimer will be reset as well    
-                 A negative value indicates that this object is not available."
-	::= { pdu2InputPhaseEntry 22 }
-
-pdu2InputPhasePowerWattHourTimer  OBJECT-TYPE
-	SYNTAX    DisplayString (SIZE (0..22))  -- display Date Time
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Timestamp of when input Watt-hours (inputWh) was last reset."
-	::= { pdu2InputPhaseEntry 23 }
-
-pdu2InputPhasePowerFactor  OBJECT-TYPE
-	SYNTAX    INTEGER		-- units 0.01
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"An input PF value.  Units are in thousandths, for example a power factor
-                 of 0.958 would be returned as 958, and 0.92 would be returned 
-		 as 920.  A negative value indicates that this object is not available."
-	::= { pdu2InputPhaseEntry 24 }
-
-pdu2InputPhasePowerVAR  OBJECT-TYPE
-	SYNTAX    INTEGER
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"An input VAR value.  Units are VAR.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2InputPhaseEntry 25 }
-
-
-
--- ====================================================================================
---
---  pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
---  pdu2Group                OBJECT IDENTIFIER       ::= { pdu2 3 }
---  PDU2 Output groups of outlets 
---  OID= .1.3.6.1.4.1.232.165.7.3
-
-
-pdu2GroupTable OBJECT-TYPE
-    SYNTAX SEQUENCE OF Pdu2GroupEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION "Aggregate Object with number of entries equal to number of PDUs
-                 and number of breakers (pdu2GroupCount)."
-    ::= { pdu2Group 1 }
-
-pdu2GroupEntry OBJECT-TYPE
-    SYNTAX Pdu2GroupEntry
-    ACCESS not-accessible
-    STATUS mandatory
-    DESCRIPTION 
-           "The input table entry containing the name, voltages, currents, power, etc."
-    INDEX { pdu2IdentIndex, pdu2GroupIndex }
-    ::= { pdu2GroupTable 1 }
-
-Pdu2GroupEntry ::= SEQUENCE {
-      pdu2GroupIndex         		INTEGER,
-      pdu2GroupName	     		DisplayString,
-      pdu2GroupType          		INTEGER,
-      pdu2GroupVoltageMeasType		INTEGER,
-      pdu2GroupVoltage          	INTEGER,
-      pdu2GroupVoltageThStatus		INTEGER,
-      pdu2GroupVoltageThLowerWarning	INTEGER,
-      pdu2GroupVoltageThLowerCritical	INTEGER,
-      pdu2GroupVoltageThUpperWarning	INTEGER,
-      pdu2GroupVoltageThUpperCritical	INTEGER,
-      pdu2groupCurrentRating		INTEGER,
-      pdu2GroupCurrent			INTEGER,
-      pdu2GroupCurrentThStatus		INTEGER,
-      pdu2GroupCurrentThLowerWarning	INTEGER,
-      pdu2GroupCurrentThLowerCritical	INTEGER,
-      pdu2GroupCurrentThUpperWarning	INTEGER,
-      pdu2GroupCurrentThUpperCritical	INTEGER,
-      pdu2GroupCurrentCrestFactor	INTEGER,
-      pdu2GroupCurrentPercentLoad	INTEGER,
-      pdu2GroupPowerVA			INTEGER,
-      pdu2GroupPowerWatts		INTEGER,
-      pdu2GroupPowerWattHour		INTEGER,
-      pdu2GroupPowerWattHourTimer	DisplayString,
-      pdu2GroupPowerFactor		INTEGER,
-      pdu2GroupPowerVAR			INTEGER,
-      pdu2GroupOutletCount	 	INTEGER,
-      pdu2groupBreakerStatus    	INTEGER    
-    }
-
-pdu2GroupIndex OBJECT-TYPE
-    SYNTAX INTEGER	(0..100)
-    ACCESS read-only
-    STATUS mandatory
-    DESCRIPTION
-	"Index for the Pdu2GroupEntry table."
-    ::= { pdu2GroupEntry 1 }
-
-pdu2GroupName  OBJECT-TYPE
-	SYNTAX    DisplayString (SIZE(1..31))
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"A descriptive name for the group."
-	::= { pdu2GroupEntry 2 }
-
-pdu2GroupType  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		breaker1pole (2),
-		breaker2pole (3),
-		breaker3pole (4),
-		outletSection (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"The type of the group. (5) has no breaker"
-	::= { pdu2GroupEntry 3 }
-
-pdu2GroupVoltageMeasType  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		singlePhase (1),
-		phase1toN (2),
-		phase2toN (3),
-		phase3toN (4),
-		phase1to2 (5),
-		phase2to3 (6),
-		phase3to1 (7)
-	}
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Value indicates what input voltage is being measured in this table row - single phase
-		voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2,
-		phase 2 to phase 3, or phase 3 to phase 1."
-	::= { pdu2GroupEntry 4 }
-
-pdu2GroupVoltage  OBJECT-TYPE
-	SYNTAX    INTEGER	-- Units 0.001 V
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Units are millivolts."
-	::= { pdu2GroupEntry 5 }
-
-pdu2GroupVoltageThStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Status of the measured group voltage relative to the configured thresholds."
-	::= { pdu2GroupEntry 6 }
-
-pdu2GroupVoltageThLowerWarning  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..500000)		-- Units 0.001 V
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 7 }
-
-pdu2GroupVoltageThLowerCritical  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..500000)		-- Units 0.001 V
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 8 }
-
-pdu2GroupVoltageThUpperWarning  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..500000)		-- Units 0.001 V
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 9 }
-
-pdu2GroupVoltageThUpperCritical  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..500000)		-- Units 0.001 V
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are millivolts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 10 }
-
-pdu2groupCurrentRating  OBJECT-TYPE
-	SYNTAX    INTEGER	-- Units 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Rated current capacity of the group.  Units are milliamps.  A negative 
-		      value indicates that the hardware current capacity is unknown (it
-		      will always be unknown for custom groups)."
-	::= { pdu2GroupEntry 11 }
-
-pdu2GroupCurrent  OBJECT-TYPE
-	SYNTAX    INTEGER	-- Units 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"A group current measurement value.  Units are milliamps."
-	::= { pdu2GroupEntry 12 }
-
-pdu2GroupCurrentThStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Status of the measured group current relative to the configured thresholds."
-	::= { pdu2GroupEntry 13 }
-
-pdu2GroupCurrentThLowerWarning  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 14 }
-
-pdu2GroupCurrentThLowerCritical  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 15 }
-
-pdu2GroupCurrentThUpperWarning  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 16 }
-
-pdu2GroupCurrentThUpperCritical  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 17 }
-
-pdu2GroupCurrentCrestFactor  OBJECT-TYPE
-	SYNTAX     INTEGER		-- units 0.001
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Current crest factor.  Units are in milli, for example a crest factor of
-                  1.414 will be returned as 1414.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 18 }
-
-pdu2GroupCurrentPercentLoad  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Current percent load, based on the rated current capacity.  Units are
-                  percentage, for example 80% will be returned as 80.  A negative
-                  value indicates that this object is not available."
-	::= { pdu2GroupEntry 19 }
-
-pdu2GroupPowerVA  OBJECT-TYPE
-	SYNTAX     INTEGER  	-- units in VA
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A group VA value.  Units are VA.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 20 }
-
-pdu2GroupPowerWatts  OBJECT-TYPE
-	SYNTAX     INTEGER	-- units in Watt
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A group Watts value.  Units are Watts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 21 }
-
-pdu2GroupPowerWattHour  OBJECT-TYPE
-	SYNTAX     INTEGER 	-- Units in Watt-Hour
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A Watt-Hour value for each section.  Units are WH. This value can be reset to 0 
-                 using GUI. In that case, the pdu2GroupPowerWattHourTimer will be reset as well.    
-                 A negative value indicates that this object is not available."
-	::= { pdu2GroupEntry 22 }
-
-pdu2GroupPowerWattHourTimer  OBJECT-TYPE
-	SYNTAX     DisplayString (SIZE (0..22))	-- display Date and Time
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Timestamp of when group Watt-hours (groupWh) was last reset."
-	::= { pdu2GroupEntry 23 }
-
-pdu2GroupPowerFactor  OBJECT-TYPE
-	SYNTAX     INTEGER
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A group PF value.  Units are in thousandths, for example a power factor
-                  of 0.958 would be returned as 958, and 0.92 would be returned as 920.  
-                 A negative value indicates that this object is not available."
-	::= { pdu2GroupEntry 24 }
-
-pdu2GroupPowerVAR  OBJECT-TYPE
-	SYNTAX     INTEGER		-- Units in VAR
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A group VAR value.  Units are VAR.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2GroupEntry 25 }
-
-pdu2GroupOutletCount  OBJECT-TYPE
-    	SYNTAX     INTEGER (0..63)
-    	ACCESS     read-only
-    	STATUS     mandatory
-    	DESCRIPTION 
-		"The number of outlets in each group (breaker)."
-         ::= { pdu2GroupEntry 26 }
-
-pdu2groupBreakerStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		notApplicable (1),
-		breakerOn (2),
-		breakerOff (3)
-	}
-	ACCESS 	   read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Only applicable to groups with breaker.  Indicates whether a breaker is turned
-		      off or on."
-	::= { pdu2GroupEntry 27 }
-
--- ====================================================================================
---
---  pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
---  pdu2Environment          OBJECT IDENTIFIER       ::= { pdu2 4 }
---  PDU2 Environment group
---  OID= .1.3.6.1.4.1.232.165.7.4
-
-pdu2EnvProbeTable  OBJECT-TYPE
-	SYNTAX 	SEQUENCE OF Pdu2EnvProbeEntry
-	ACCESS 	not-accessible
-	STATUS  mandatory
-	DESCRIPTION 
-		"A list of environment probe (1 per PDU) for temperature, humidity, and contacts.  
-                 The number of entries is given by number of PDUs in daisy chain."
-	::= { pdu2Environment 1 }
-
-pdu2EnvProbeEntry  OBJECT-TYPE
-	SYNTAX 	Pdu2EnvProbeEntry
-	ACCESS  not-accessible
-	STATUS  mandatory
-	DESCRIPTION 
-		"Aggregate entries equal to number of PDUs."
-	INDEX { pdu2IdentIndex }
-	::= { pdu2EnvProbeTable 1 }
-
-Pdu2EnvProbeEntry ::= SEQUENCE {
-	pdu2TemperatureScale		INTEGER,
-	pdu2TemperatureCount		INTEGER,
-	pdu2HumidityCount		INTEGER,
-	pdu2ContactCount		INTEGER
-}
-
-pdu2TemperatureScale  OBJECT-TYPE
-	SYNTAX  INTEGER {
-		celsius (1),
-		fahrenheit (2)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Scale used to return temperature objects."
-	::= { pdu2EnvProbeEntry 1 }
-
-pdu2TemperatureCount  OBJECT-TYPE
-	SYNTAX  INTEGER
-	ACCESS 	read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Max number of temperature measurements (1 per probe)."
-	::= { pdu2EnvProbeEntry 2  }
-
-pdu2HumidityCount  OBJECT-TYPE
-	SYNTAX  INTEGER
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Max number of humidity measurements  (1 per probe)."
-	::= { pdu2EnvProbeEntry 3 }
-
-pdu2ContactCount  OBJECT-TYPE
-	SYNTAX   INTEGER
-	ACCESS 	 read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Max number of contact sensors  (1 per probe)."
-	::= { pdu2EnvProbeEntry 4 }
-
--- ========Temperature Measurements ============
-
-pdu2TemperatureTable  OBJECT-TYPE
-	SYNTAX 	SEQUENCE OF Pdu2TemperatureEntry
-	ACCESS 	not-accessible
-	STATUS  mandatory
-	DESCRIPTION 
-		"A list of temperature probe measurements.  The number of entries are
-		 given by number of pdu and pdu2TemperatureCount."
-	::= { pdu2Environment 2 }
-
-pdu2TemperatureEntry  OBJECT-TYPE
-	SYNTAX 	Pdu2TemperatureEntry
-	ACCESS  not-accessible
-	STATUS  mandatory
-	DESCRIPTION 
-		"An entry for a temperature measurement."
-	INDEX { pdu2IdentIndex, pdu2TemperatureIndex }
-	::= { pdu2TemperatureTable 1 }
-
-Pdu2TemperatureEntry ::= SEQUENCE {
-	pdu2TemperatureIndex		INTEGER,
-	pdu2TemperatureName		DisplayString,
-	pdu2TemperatureProbeStatus	INTEGER,
-	pdu2TemperatureValue		INTEGER,
-	pdu2TemperatureThStatus		INTEGER,
-	pdu2TemperatureThLowerWarning	INTEGER,
-	pdu2TemperatureThLowerCritical	INTEGER,
-	pdu2TemperatureThUpperWarning	INTEGER,
-	pdu2TemperatureThUpperCritical	INTEGER
-}
-
-pdu2TemperatureIndex  OBJECT-TYPE
-	SYNTAX   INTEGER (1..2)
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"A unique value for each temperature probe measurement.  Its value
-		      ranges from 1 to temperatureCount."
-	::= { pdu2TemperatureEntry 1 }
-
-pdu2TemperatureName  OBJECT-TYPE
-	SYNTAX   DisplayString (SIZE(1..31))
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"A descriptive name for the temperature probe."
-	::= { pdu2TemperatureEntry 2 }
-
-pdu2TemperatureProbeStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		disconnected (1),
-		connected (2),
-		bad (3)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Indicates whether a probe is connected or not."
-	::= { pdu2TemperatureEntry 3 }
-
-pdu2TemperatureValue  OBJECT-TYPE
-	SYNTAX    INTEGER  --0.1 Fahrenheit or Celsius
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Units are in tenths of a degree (either Fahrenheit or Celsius). 
-                 Divide by ten to get degrees."
-	::= { pdu2TemperatureEntry 4 }
-
-pdu2TemperatureThStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Status of the measured temperature relative to the configured thresholds."
-	::= { pdu2TemperatureEntry 5 }
-
-pdu2TemperatureThLowerWarning  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..150000)  -- 0.1 of a degree
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are tenths of a degree.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2TemperatureEntry 6 }
-
-pdu2TemperatureThLowerCritical  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..150000)   -- 0.1 of a degree
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are tenths of a degree.  A negative value
-		          indicates that this object is not available."
-	::= { pdu2TemperatureEntry 7 }
-
-pdu2TemperatureThUpperWarning  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..150000)    -- 0.1 of a degree
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are tenths of a degree.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2TemperatureEntry 8 }
-
-pdu2TemperatureThUpperCritical  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..150000)   -- 0.1 of a degree
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are tenths of a degree.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2TemperatureEntry 9 }
-
--- ==========Humidity Measurements ==========
-
-pdu2HumidityTable  OBJECT-TYPE
-	SYNTAX   SEQUENCE OF Pdu2HumidityEntry
-	ACCESS   not-accessible
-	STATUS   mandatory
-	DESCRIPTION 
-		"A list of humidity probe measurements.  The number of entries are
-		 given by number of pdu and pdu2HumidityCount."
-	::= { pdu2Environment 3 }
-
-pdu2HumidityEntry  OBJECT-TYPE
-	SYNTAX 	Pdu2HumidityEntry
-	ACCESS  not-accessible
-	STATUS  mandatory
-	DESCRIPTION 
-		"An entry for a humidity measurement."
-	INDEX { pdu2IdentIndex, pdu2HumidityIndex }
-	::= { pdu2HumidityTable 1 }
-
-Pdu2HumidityEntry ::= SEQUENCE {
-	pdu2HumidityIndex		INTEGER,
-	pdu2HumidityName		DisplayString,
-	pdu2HumidityProbeStatus		INTEGER,
-	pdu2HumidityValue		INTEGER,
-	pdu2HumidityThStatus		INTEGER,
-	pdu2HumidityThLowerWarning	INTEGER,
-	pdu2HumidityThLowerCritical	INTEGER,
-	pdu2HumidityThUpperWarning	INTEGER,
-	pdu2HumidityThUpperCritical	INTEGER
-}
-
-pdu2HumidityIndex  OBJECT-TYPE
-	SYNTAX     INTEGER (1..2)
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A unique value for each humidity probe measurement.  Its value
-		 ranges from 1 to pdu2HumidityCount per pdu."
-	::= { pdu2HumidityEntry 1 }
-
-pdu2HumidityName  OBJECT-TYPE
-	SYNTAX   DisplayString (SIZE(1..31))
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"A descriptive name for the humidity probe."
-	::= { pdu2HumidityEntry 2 }
-
-pdu2HumidityProbeStatus  OBJECT-TYPE
-	SYNTAX  INTEGER {
-		disconnected (1),
-		connected (2),
-		bad (3)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Indicates whether a probe is connected or not."
-	::= { pdu2HumidityEntry 3 }
-
-pdu2HumidityValue  OBJECT-TYPE
-	SYNTAX    INTEGER   -- 0.1 of %RH
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Units are tenths of a percent relative humidity.  Divide the value by 10 to get %RH."
-	::= { pdu2HumidityEntry 4 }
-
-pdu2HumidityThStatus  OBJECT-TYPE
-	SYNTAX  INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Status of the measured humidity relative to the configured thresholds."
-	::= { pdu2HumidityEntry 5 }
-
-pdu2HumidityThLowerWarning  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..1000)   -- 0.1 of %RH
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are 0.1 %RH.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2HumidityEntry 6 }
-
-pdu2HumidityThLowerCritical  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..1000)  -- 0.1 of %RH
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are 0.1 %RH.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2HumidityEntry 7 }
-
-pdu2HumidityThUpperWarning  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..1000)   -- 0.1 of %RH
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are 0.1 %RH.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2HumidityEntry 8 }
-
-pdu2HumidityThUpperCritical  OBJECT-TYPE
-	SYNTAX   INTEGER (-1..1000)   -- 0.1 of %RH
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are 0.1 %RH.  A negative value
-                  indicates that this object is not available."
-	::= { pdu2HumidityEntry 9 }
-
--- ======Dry Contacts Status==========
-
-pdu2ContactTable  OBJECT-TYPE
-	SYNTAX  SEQUENCE OF Pdu2ContactEntry
-	ACCESS  not-accessible
-	STATUS  mandatory
-	DESCRIPTION 
-		"A list of contact sensors.  The number of entries are
-		 given by number of pdu and pdu2ContactCount."
-	::= { pdu2Environment 4 }
-
-pdu2ContactEntry  OBJECT-TYPE
-	SYNTAX 	 Pdu2ContactEntry
-	ACCESS   not-accessible
-	STATUS   mandatory
-	DESCRIPTION 
-		"An entry for a contact sensor"
-	INDEX { pdu2IdentIndex, pdu2ContactIndex }
-	::= { pdu2ContactTable 1 }
-
-Pdu2ContactEntry ::= SEQUENCE {
-	pdu2ContactIndex	INTEGER,
-	pdu2ContactName		DisplayString,
-	pdu2ContactProbeStatus	INTEGER,
-	pdu2ContactState	INTEGER
-}
-
-pdu2ContactIndex  OBJECT-TYPE
-	SYNTAX   INTEGER (1..3)
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"A unique value for each contact sensor.  Its value ranges from 1 to
-		      contactCount."
-	::= { pdu2ContactEntry 1 }
-
-pdu2ContactName  OBJECT-TYPE
-	SYNTAX    DisplayString (SIZE(1..31))
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"A descriptive name for the contact sensor."
-	::= { pdu2ContactEntry 2 }
-
-pdu2ContactProbeStatus  OBJECT-TYPE
-	SYNTAX  INTEGER {
-		disconnected (1),
-		connected (2),
-		bad (3)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Indicates whether a probe is connected or not.
-		Will not be returned  if the contact sensor is internal to the ePDU,
-		in that case only contactState should be read."
-	::= { pdu2ContactEntry 3 }
-
-pdu2ContactState  OBJECT-TYPE
-	SYNTAX  INTEGER {
-		contactOpen (1),
-		contactClosed (2),
-		contactBad (3)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"The state of the contact sensor."
-	::= { pdu2ContactEntry 4 }
-
-
--- ====================================================================================
---
---  pdu2                    OBJECT IDENTIFIER       ::= {cpqPower 7}    
---  pdu2Outlet               OBJECT IDENTIFIER       ::= { pdu2 5 }
---  PDU2 Outlet group
---  OID= .1.3.6.1.4.1.232.165.5
-
-pdu2OutletTable  OBJECT-TYPE
-	SYNTAX SEQUENCE OF Pdu2OutletEntry
-	ACCESS     not-accessible
-	STATUS     mandatory
-	DESCRIPTION 
-		"Aggregate Object with number of entries equal to Number of PDU (pdu2IdentIndex)
-                 and Number of outlet per PDU (pdu2OutletIndex)."
-	::= { pdu2Outlet 1 }
-
-pdu2OutletEntry  OBJECT-TYPE
-	SYNTAX 	Pdu2OutletEntry
-	ACCESS     not-accessible
-	STATUS     mandatory
-	DESCRIPTION 
-		"The Outlet table entry containing the type, voltage, current etc."
-  INDEX { pdu2IdentIndex, pdu2OutletIndex }
-	::= { pdu2OutletTable 1 }
-
-Pdu2OutletEntry ::= SEQUENCE {
-	pdu2OutletIndex				INTEGER,
-	pdu2OutletName				DisplayString,
-	pdu2OutletType				INTEGER,
-	pdu2OutletCurrentRating			INTEGER,
-	pdu2OutletCurrent			INTEGER,
-	pdu2OutletCurrentThStatus		INTEGER,
-	pdu2OutletCurrentThLowerWarning		INTEGER,
-	pdu2OutletCurrentThLowerCritical	INTEGER,
-	pdu2OutletCurrentThUpperWarning		INTEGER,
-	pdu2OutletCurrentThUpperCritical	INTEGER,
-	pdu2OutletCurrentCrestFactor		INTEGER,
-	pdu2OutletCurrentPercentLoad		INTEGER,
-	pdu2OutletVA				INTEGER,
-	pdu2OutletWatts				INTEGER,
-	pdu2OutletWh				INTEGER,
-	pdu2OutletWhTimer			DisplayString,
-	pdu2OutletPowerFactor			INTEGER,
-	pdu2OutletVAR				INTEGER
-}
-
-pdu2OutletIndex OBJECT-TYPE
-    	SYNTAX INTEGER	(0..100)
-    	ACCESS read-only
-    	STATUS mandatory
-    	DESCRIPTION
-		"Index for each outlet, value from 1 to the number of outlets per PDU."
-    	::= { pdu2OutletEntry 1 }
-
-pdu2OutletName  OBJECT-TYPE
-	SYNTAX   DisplayString (SIZE(1..31))
-	ACCESS   read-only
-	STATUS   mandatory
-	DESCRIPTION 
-		"A descriptive name for the outlet."
-	::= { pdu2OutletEntry 2 }
-
-pdu2OutletType  OBJECT-TYPE
-	SYNTAX  INTEGER {
-		iecC13 (1),
-		iecC19 (2),
-		uk (10),
-		french (11),
-		schuko (12),
-		nema515 (20),
-		nema51520 (21),
-		nema520 (22),
-		nemaL520 (23),
-		nemaL530 (24),
-		nema615 (25),
-		nema620 (26),
-		nemaL620 (27),
-		nemaL630 (28),
-		nemaL715 (29),
-		rf203p277 (30)
-	}
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Type of this outlet - C13, C19."
-	::= { pdu2OutletEntry 3 }
-
-pdu2OutletCurrentRating  OBJECT-TYPE
-	SYNTAX    INTEGER	-- Units 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Rated current capacity of this outlet.  Units are milliamps.  A negative 
-		 value indicates that the hardware current capacity is unknown."
-	::= { pdu2OutletEntry 4 }
-
-pdu2OutletCurrent  OBJECT-TYPE
-	SYNTAX    INTEGER	-- Units 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"A outlet current measurement value.  Units are milliamps."
-	::= { pdu2OutletEntry 5 }
-
-pdu2OutletCurrentThStatus  OBJECT-TYPE
-	SYNTAX     INTEGER {
-		good (1),
-		lowWarning (2),
-		lowCritical (3),
-		highWarning (4),
-		highCritical (5)
-	}
-	ACCESS  read-only
-	STATUS  mandatory
-	DESCRIPTION 
-		"Status of the measured outlet current relative to the configured thresholds."
-	::= { pdu2OutletEntry 6 }
-
-pdu2OutletCurrentThLowerWarning  OBJECT-TYPE
-	SYNTAX    INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS    read-only
-	STATUS    mandatory
-	DESCRIPTION 
-		"Lower warning threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 7 }
-
-pdu2OutletCurrentThLowerCritical  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Lower critical threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 8 }
-
-pdu2OutletCurrentThUpperWarning  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Upper warning threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 9 }
-
-pdu2OutletCurrentThUpperCritical  OBJECT-TYPE
-	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Upper critical threshold.  Units are milliamps.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 10 }
-
-pdu2OutletCurrentCrestFactor  OBJECT-TYPE
-	SYNTAX     INTEGER		-- units 0.001
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Current crest factor.  Units are in milli, for example a crest factor of
-                  1.414 will be returned as 1414.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 11 }
-
-pdu2OutletCurrentPercentLoad  OBJECT-TYPE
-	SYNTAX     INTEGER		-- unit in percentage
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Current percent load, based on the rated current capacity.  Units are
-                  percentage, for example 80% will be returned as 80.  A negative
-                  value indicates that this object is not available."
-	::= { pdu2OutletEntry 12 }
-
-pdu2OutletVA  OBJECT-TYPE
-	SYNTAX     INTEGER  	-- units in VA
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A outlet VA value.  Units are VA.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 13 }
-
-pdu2OutletWatts  OBJECT-TYPE
-	SYNTAX     INTEGER	-- units in Watt
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A outlet Watts value.  Units are Watts.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 14 }
-
-pdu2OutletWh  OBJECT-TYPE
-	SYNTAX     INTEGER 	-- Units in Watt-Hour
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"A Watt-Hour value for each outlet.  Units are WH.
-This object is writable so that it can be reset to 0.  When it is
-		written to, the pdu2OutletWhTimer will be reset updated as well    
-      A negative value indicates that this object is not available."
-	::= { pdu2OutletEntry 15 }
-
-pdu2OutletWhTimer  OBJECT-TYPE
-	SYNTAX     DisplayString (SIZE (0..22))	-- display Date and Time
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"Timestamp (date and time) of outlet Watt-hours was last reset."
-	::= { pdu2OutletEntry 16 }
-
-pdu2OutletPowerFactor  OBJECT-TYPE
-	SYNTAX     INTEGER		-- units are in 0.001
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"An outlet PF value.  Units are in thousandths, for example a power factor
-                  of 0.958 would be returned as 958, and 0.92 would be returned 
-		          as 920.  A negative value indicates that this object is not available."
-	::= { pdu2OutletEntry 17 }
-
-pdu2OutletVAR  OBJECT-TYPE
-	SYNTAX     INTEGER		-- Units in VAR
-	ACCESS     read-only
-	STATUS     mandatory
-	DESCRIPTION 
-		"An outlet VAR value.  Units are VAR.  A negative value indicates
-		          that this object is not available."
-	::= { pdu2OutletEntry 18 }
-
-
-
--- ====================== PDU Outlet Control=====================
-
-pdu2OutletControlTable  OBJECT-TYPE
-	SYNTAX SEQUENCE OF Pdu2OutletControlEntry
-	ACCESS     not-accessible
-	STATUS     mandatory
-	DESCRIPTION 
-		"Aggregate Object with number of entries equal to Number of PDU (pdu2IdentIndex) 
-                 and Number of outlets per PDU (pdu2OutletIndex)."
-	::= { pdu2Outlet 2 }
-
-pdu2OutletControlEntry  OBJECT-TYPE
-	SYNTAX 	Pdu2OutletControlEntry
-	ACCESS     not-accessible
-	STATUS     mandatory
-	DESCRIPTION 
-		"The Outlet table entry containing the type, voltage, current etc."
-  INDEX { pdu2IdentIndex, pdu2OutletIndex }
-	::= { pdu2OutletControlTable 1 }
-
-Pdu2OutletControlEntry ::= SEQUENCE {
-
-	pdu2OutletControlStatus			INTEGER,
-	pdu2OutletControlOffCmd			INTEGER,
-	pdu2OutletControlOnCmd			INTEGER,
-	pdu2OutletControlRebootCmd		INTEGER,
-	pdu2OutletControlPowerOnState		INTEGER,
-	pdu2OutletControlSequenceDelay		INTEGER,
-	pdu2OutletControlRebootOffTime		INTEGER,
-	pdu2OutletControlSwitchable		INTEGER,
-	pdu2OutletControlShutoffDelay		INTEGER
-}
-
-pdu2OutletControlStatus  OBJECT-TYPE
-    	SYNTAX 		INTEGER	{
-			off (1),
-			on (2),
-			pendingOff (3),
-			pendingOn (4)
-			}
-    	ACCESS 		read-only
-    	STATUS 		mandatory
-    	DESCRIPTION
-		"current state of a control outlet."
-    	::= { pdu2OutletControlEntry 1 }
-
-pdu2OutletControlOffCmd  OBJECT-TYPE
-    	SYNTAX 		 INTEGER (-1..99999)		
-    	ACCESS 		 read-write
-    	STATUS 		 mandatory
-    	DESCRIPTION
-		"When write, once issued, the outlet will turn Off immediately.
-                 0-n: Time in seconds until the outlet command is issued
-                 -1: Cancel a pending outlet Off command
-		 When read, returns -1 if no command is pending, or the current downcount in 
-                 seconds of a pending command."
-    	::= { pdu2OutletControlEntry 2 }
-
-pdu2OutletControlOnCmd  OBJECT-TYPE
-    	SYNTAX 		INTEGER (-1..99999)		
-    	ACCESS 		read-write
-    	STATUS 		mandatory
-    	DESCRIPTION
-		"When write, once issued, the outlet will turn On immediately.
-                 0-n: Time in seconds until the outlet command is issued
-                 -1: Cancel a pending outlet On command
-		 When read, returns -1 if no command is pending, or the current downcount in 
-                 seconds of a pending command."
-    	::= { pdu2OutletControlEntry 3 }
-
-pdu2OutletControlRebootCmd  OBJECT-TYPE
-    	SYNTAX 		    INTEGER (-1..99999)		
-    	ACCESS 		    read-write
-    	STATUS 		    mandatory
-    	DESCRIPTION
-		"When write, for outlets that are On prior to this Reboot command, they will 
-                 switch Off immediately when the command is issued, remain Off for 
-                 outletControlRebootOffTime seconds, and then turn back On.
-		 For outlets that are Off prior to the Reboot command, they will turn On after 
-                 a delay of outletControlRebootOffTime seconds from when the command is issued.
-		 0-n : Time in seconds until the Reboot command is issued
-		 -1 : Cancel a pending outlet Reboot command 
-		
-		When read, returns -1 if no command is pending, or the current downcount in 
-                seconds of a pending command."
-    	::= { pdu2OutletControlEntry 4 }
-
-pdu2OutletControlPowerOnState  OBJECT-TYPE
-    	SYNTAX 		    INTEGER {
-		            off (1),
-		            on (2),
-		            lastState (3)
-                            }	
-    	ACCESS 		    read-write
-    	STATUS 		    mandatory
-    	DESCRIPTION
-		"Determines the outlet state when power is applied to the unit.
-		1 : not restart at device startup
-		2 : should sequence back ON in line with outletControlSequenceTime
-		3 : should take the state the outlet had when power was lost.
-		If the state was ON, should sequence back ON in line with outletControlSequenceTime."
-    	::= { pdu2OutletControlEntry 5 }
-
-pdu2OutletControlSequenceDelay  OBJECT-TYPE
-    	SYNTAX 		        INTEGER (-1..99999)		
-    	ACCESS 		        read-write
-    	STATUS 		        mandatory
-    	DESCRIPTION
-		"Time delay in seconds from when a Global Sequence On command is issued to
-		when the command is executed on this outlet.  This delay is also used as a power-on
-		delay. Set to -1 to exclude this outlet from Global Sequence On commands."
-    	::= { pdu2OutletControlEntry 6 }
-
-pdu2OutletControlRebootOffTime  OBJECT-TYPE
-    	SYNTAX 		        INTEGER (-1..99999)		
-    	ACCESS 		        read-write
-    	STATUS 		        mandatory
-    	DESCRIPTION
-		"Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command."
-    	::= { pdu2OutletControlEntry 7 }
-
-pdu2OutletControlSwitchable  OBJECT-TYPE
-    	SYNTAX 		    INTEGER {
-		            switchable (1),
-		            notSwitchable (2)
-                            }	
-    	ACCESS 		    read-write
-    	STATUS 		    mandatory
-    	DESCRIPTION
-		"Determines the outlet capability to be controlled On/Off from the communication channels.
-		1 : control On/Off enabled
-		2 : control On/Off disabled."
-    	::= { pdu2OutletControlEntry 8 }
-
-pdu2OutletControlShutoffDelay  OBJECT-TYPE
-    	SYNTAX 		        INTEGER (-1..99999)		
-    	ACCESS 		        read-write
-    	STATUS 		        mandatory
-    	DESCRIPTION
-		"Time delay in seconds that could be taken in account before shutting of the outlet.
-    An application which need to shutoff properly an outlet will read this parameter first
-    then write it to the command pdu2OutletControlOffCmd."
-    	::= { pdu2OutletControlEntry 9 }
-
-
--- =======================
--- Device Traps
--- =======================
-trapCritical TRAP-TYPE
-	ENTERPRISE cpqPower
-	VARIABLES  { sysName, 
-	             trapCode, 
-	             trapDescription, 
-	             trapDeviceName,
-	             trapDeviceDetails, 
-	             trapDeviceMgmtUrl }
-	DESCRIPTION
-        "A critical alarm has occurred. Action: Check the Trap Details for more information."
-    --#TYPE      "Critical Alarm"
-    --#SEVERITY  CRITICAL
-    --#CATEGORY  "PowerDevice"
-    --#SIMPLE_SEVERITY CRITICAL
-    --#HWSTATUS_CATEGORY POWER
-    --#SUMMARY " %s from %s %s "
-    --#ARGUMENTS {2, 3, 0}
-    
-    -- PDU Critical Alarm trap text:          Description:
-	--		Voltage High Critical				The PDU has detected an input line voltage that is more than 20% ABOVE the expected voltage		
-	--		Voltage Low Critical				The PDU has detected a very low input line voltage more than 20% BELOW the expected voltage, or the breaker may have tripped. 
-	--		Load Critical					The rated capacity of the breaker has been exceeded. There is a high risk of tripping the breaker
-	--		Current Critical				Current has exceeded the breaker rating level. The addition of any new load could overload or trip the breaker
-	--		Total Power Critical				The rated capacity of the PDU has been exceeded. There is a risk of tripping the branch circuit protection
-	--		Total Heat Critical				The heat created by the load attached to this PDU has exceeded the set threshold
-	--		Total Load Critical				The rated capacity of the PDU has been exceeded. There is a risk of tripping the branch circuit protection
-	
-    -- UPS Critical Alarm trap text:          Description:
-    	--		Agent(s) Not Connected				Loss communication with remote shutdown agent(s)
-	--		Battery Failure					ABM reports Battery failure		
-	--		Battery Low					Battery has reached its Low battery threshold
-	--		EPO Initiated					A Remote Emergency-Power-Off initiated to shutdown UPS immediately.
-	--		Fan Failure					The UPS's Fan Failure detected
-	--		Internal Failure				An internal UPS circuit problem is detected
-	--		Loss of Redundant Communication			Remote Agent lost communicating with one of the redudant UPSes 
-	--		Manual Load Dumped				UPS is switched off manually bys user
-	--		Overload					UPS is overloaded
-	--		Temperature Out of Range			UPS operating temperature is out of range
-	--		Charger Fault					Battery Charger is failure (Offline UPS only)
-	--		DC Bus High/Low					DC Bus voltage is out of range (Offline UPS only)
-	--		DC AUX Power Fault				DC AUX Power circuit is failure (Offline UPS only)
-	--		AC AUX Power Fault				AC AUX Power circuit is failure (Offline UPS only)
-	--		Output Fault					Output Circuit is failure (Offline UPS only)
-	--		DC-DC Fault					DC-to-DC is failure	(Offline UPS only)			
-	--		Output Short					Output circuit is shorted (Offline UPS only)
-	--		Shutdown Imminent				Battery is on too low capacity, UPS is shutdown soon (Offline UPS only)
-	--		Utility Failure					Utility Power is lost (Offline UPS only)
-	--		BP Missing					Missing Battery Pack (Offline UPS only)
-	--		DB Missing					Missing IO Distribution Box (Offline UPS only)
-	--		No Battery					Battery not detected (Offline UPS only)	
-	
-	-- iPDU Critical Alarm trap text:         Description:
-	--		Voltage High 					The voltage for the iPDU is above the warning or critical limit
-	--		Voltage Low 					The voltage for the iPDU is below the warning or critical limit
-	--		Total PDU Load 					The total load of the iPDU is above the warning or critical limit
-	--		Phase Load 					The phase load is above the warning or critical limit
-	--		Load Segment Current 				The current for the circuit breaker is above the warning or critical limit
-	--		Managed Ext. Bar Communication 			An Intelligent Extension Bar can no longer communicate with the iPDU
-	--		Display Communication				The Display Module can no longer communicate with the iPDU
-	--		Redundant Communication				The iPDU cannot communicate with the redundant PDU or there is a redundancy configuration error
-	--		Remote PDU IP Mismatch				The redundant PDU is already configured for redundancy with another PDU
-	--		Remote Outlet Control Disabled			The redundant PDU outlet control settings are disabled and will therefore not allow redundant management control of its outlets
-	--		PDU Communication				The Primary iPDU cannot communicate with the Secondary iPDU 
-        ::= 1
-
-trapWarning TRAP-TYPE
-	ENTERPRISE cpqPower
-	VARIABLES  { sysName, 
-	             trapCode, 
-	             trapDescription, 
-	             trapDeviceName,
-	             trapDeviceDetails, 
-	             trapDeviceMgmtUrl }
-	DESCRIPTION
-        "A warning alarm has occurred. Action: Check the Trap Details for more information."
-    --#TYPE      "Warning Alarm"
-    --#SEVERITY  MINOR
-    --#CATEGORY  "PowerDevice"
-    --#SIMPLE_SEVERITY MAJOR
-    --#HWSTATUS_CATEGORY POWER
-    --#SUMMARY " %s from %s %s "
-    --#ARGUMENTS {2, 3, 0}
-
-  	-- PDU Warning Alarm trap text            Description:
-	--		Voltage High Warning				The PDU has detected an input line voltage that is more than 10% ABOVE the expected voltage
-	--		Voltage Low Warning				The PDU has detected an input line voltage that is more than 10% BELOW the expected voltage
-	--		Load Warning					Load has reached the rating level for this breaker, the addition of any new load could overload or trip the breaker
-	--		Current Warning					Current has reached the rating level for this breaker, the addition of any new load could overload or trip the breaker
-	--		Total Power Warning				The rated capacity for PDU has reached rating level. There is a risk of tripping the branch circuit protection
-	--		Total Heat Warning				The heat created by the load attached to this PDU has reached a threshold
-	--		Total Load Warning				The rated capacity for PDU has reached the rating level. There is a risk of tripping the branch circuit protection
-	--		PDU Communication Lost				Connection between the daisy-chained PDUs is lost.
-
-  	-- UPS Warning Alarm trap text            Description:
-  	--		Battery Discharged				The UPS Batteries are completely discharged
-	--		Battery Disconnected				The batteries are not conntected to the UPS
-	--		Bypass On Auto					The UPS is operating on automatic Bypass
-	--		Bypass Not Available				The UPS Bypass is not available due to a Battery test or internal failure
-	--		Input Out of Range				Input voltage is over or under the operating ranges
-	--		Loss of Redundant Power				One of the redundant UPS is switched off
-	--		On Battery					The UPS is operating on-Battery
-	--		Shutdown Pending				The UPS is about to shutdown soon
-	--		Site Wiring Fault				There is a fault in the input wiring other than Phase Rotation
-	--		Input Frequency NOK				Input Frequency is out of range (Offline UPS only)
-	
-	
-  	-- iPDU Warning Alarm trap text            Description:
-	--		Topology Discovery				An outlet device on an Intelligent Extension Bar can no longer communicate with the iPDU
-	--		Remote PDU Model Mismatch			The two PDUs configured for redundancy management are different PDU models
-	::= 2
-
-trapInformation TRAP-TYPE
-	ENTERPRISE cpqPower
-	VARIABLES  { sysName, 
-	             trapCode, 
-	             trapDescription, 
-	             trapDeviceName,
-	             trapDeviceDetails, 
-	             trapDeviceMgmtUrl }
-	DESCRIPTION
-        "An informational alarm has occurred. Action: Check the Trap Details for more information."
-    --#TYPE      "Information Alarm"
-    --#SEVERITY  INFORMATIONAL
-    --#CATEGORY  "PowerDevice"
-    --#SIMPLE_SEVERITY OK
-    --#HWSTATUS_CATEGORY POWER
-    --#SUMMARY " %s from %s %s "
-    --#ARGUMENTS {2, 3, 0}
-
- 	-- PDU Informational Alarm trap text          Description:
-	--		(none)						(none)
-	
-  	-- UPS Informational Alarm trap text          Description:
-	--		On Boost					Input voltage low, UPS is boosting to keep output voltage at normal level
-	--		On Buck						Input voltage is high, UPS is reducing to keep output voltage at normal level
-	--		UPS Started On Battery				UPS started on battery, there is no utility input.
- 	--		ACC Active					Active Current Correction mode is active (Offline UPS only)
- 	
- 	-- iPDU Information Alarm trap text            Description:
-	--		Managed Ext. Bar Connected			iPDU detects an Extension Bar connected		
-	--		Managed Ext. Bar Disconnected			iPDU detects an Extension Bar disconnected		
-	--		Display Connected				iPDU detects the Display Module connected		
-	--		Display Disconnected				iPDU detects the Display Module disconnected		
-	--		Discovery Capable Device Connected		iPDU detects an IPD capable device was connected
-	--		Discovery Capable Device Disconnected		iPDU detects an IPD capable device was disconnected
-	--		Secondary PDU Connected				The first iDPU detects the second iPDU connected
-	--		Secondary PDU Disconnected			The first iPDU detects the second iPDU disconnected
-	::= 3
-
-trapCleared TRAP-TYPE
-	ENTERPRISE cpqPower
-	VARIABLES  { sysName, 
-	             trapCode, 
-	             trapDescription, 
-	             trapDeviceName,
-	             trapDeviceDetails, 
-	             trapDeviceMgmtUrl }
-	DESCRIPTION
-        "An alarm has cleared. Action: Check the Trap Details for more information."
-    --#TYPE      "Cleared Alarm"
-    --#SEVERITY  INFORMATIONAL
-    --#CATEGORY  "PowerDevice"
-    --#SIMPLE_SEVERITY OK
-    --#HWSTATUS_CATEGORY POWER
-    --#SUMMARY " %s from %s %s "
-    --#ARGUMENTS {2, 3, 0}
-    ::= 4
-
-trapTest TRAP-TYPE
-        ENTERPRISE cpqPower
-        VARIABLES  { sysName, 
-                     trapCode,
-		     trapDescription,
-		     trapDeviceName,
-                     trapDeviceDetails, 
-                     trapDeviceMgmtUrl } 
-        DESCRIPTION
-        "Test trap sent to a trap receiver to check proper reception of traps"
-    --#TYPE         "Test Trap"
-    --#SEVERITY     INFORMATIONAL
-    --#CATEGORY     "PowerDevice"
-    --#SIMPLE_SEVERITY OK
-    --#HWSTATUS_CATEGORY POWER
-    --#SUMMARY " %s from %s %s "
-    --#ARGUMENTS {2, 3, 0}    
-        ::= 5
-
-deviceTrapInitialization TRAP-TYPE
-	ENTERPRISE cpqPower
-	VARIABLES   { sysName, deviceIdentName }
-	DESCRIPTION
-		"This trap is sent each time a power device is initialized."
-    --#TYPE      "Device Initialization"
-    --#SEVERITY  INFORMATIONAL
-    --#CATEGORY  "PowerDevice"	
-	::= 6
-
-
-END
+-- ****************************************************************************
+-- :CPQ,DEV:
+--
+-- * POWER DEVICE SNMP MANAGEMENT CARD MIB DEFINITIONS
+--
+-- * $Date: 2019/09/16 10:00:00 $
+-- * $Revision: 1.84 $
+--   Revised by Shreekanth Gonibasappa
+--   Hewlett-Packard Company
+--   Confidential - Need To Know
+-- :CPQ,ENDDEV:
+-- ****************************************************************************
+--
+--            Power Device SNMP Management Card 
+--         Management Information Base for SNMP Network Management
+--
+--
+--      Copyright 2001, 2016 Hewlett-Packard Enterprise Development Company, L.P.
+--
+--      Hewlett-Packard Enterprise Company shall not be liable for technical or
+--      editorial errors or omissions contained herein. The information in
+--      this document is provided "as is" without warranty of any kind and
+--      is subject to change without notice. The warranties for HP products
+--      are set forth in the express limited warranty statements
+--      accompanying such products. Nothing herein should be construed as
+--      constituting an additional warranty.
+--
+--      Confidential computer software. Valid license from HPE required for
+--      possession, use or copying. Consistent with FAR 12.211 and 12.212,
+--      Commercial Computer Software, Computer Software Documentation, and
+--      Technical Data for Commercial Items are licensed to the U.S.
+--      Government under vendor's standard commercial license.
+--
+--      Refer to the READMIB.RDM file for more information about the
+--      organization of the information in the Compaq Enterprise.
+--
+--      The Compaq Enterprise number is 232.
+--      The ASN.1 prefix to, and including the Compaq Enterprise is:
+--           1.3.6.1.4.1.232
+--
+--      MIB Version 1.84
+--    
+--
+--    *********************************************************************
+-- :CPQ,DEV:
+--    Release History
+--    Date: October 25, 2005 (version 1.0) - Phi Nguyen
+--    Date: December 05, 2005 (version 1.2) - Phi Nguyen
+--    Date: Jan 17, 2008 (version 1.31) Add PDR - Brian Vo
+--    Date: Feb 25, 2008 (version 1.40) Add Type 19 and trigger TestTrap - Brian Vo
+--    Date: May 20, 2009 (version 1.61) Add new Modular PDU - Brian Vo
+--    Date: Nov 19, 2009 (version 1.62) Add Input Rating, Redundant Status -Brian Vo
+--    Date: Jan 05, 2011 (version 1.64) Add OIDs to support mPDU Rack information -Brian Vo
+--    Date: Mar 04, 2011 (v1.66) Modify description for OIDs support HPSIM - Brian Vo
+--    Date: Oct 27, 2011 (v1.66) Add #Summary and #Arguments to the Trap-Type - Brian Vo
+--    Date: Dec 13, 2011 (v1.66) Add mpduRegionalNominalVotage, mpduDeviceDetectionThreshold - Brian Vo
+--    Date: Dec 13, 2011 (v1.66) Add PDU inputCurrent and breakerCurrent with 2 decimal points - Brian Vo
+--    Date: Feb 17, 2012 (v1.66) Add Offline UPS - Brian Vo
+--    Date: Mar 16, 2012 (v1.66) Rename to oupsRackID and oupsRackProductDescription - Brian Vo
+--    Date: Mar 26, 2012 (v1.66) Change Input and Output PowerFactor not per phase  - Brian Vo
+--    Date: Apr 04, 2012 (v1.66) Add MEPO and InputWithGenerator  - Brian Vo
+--    Date: Sep 13, 2012 (v1.68) Add power metering in WH for mPDU  - Brian Vo
+--    Date: Oct 08, 2012 (v1.70) Revise the oups (DirectFlow UPS) section  - Brian Vo
+--    Date: Nov 13, 2012 (v1.72) add oupsOutputLoadPerPhase, change data type for load level  - Brian Vo
+--    Date: Jan 08, 2013 (v1.72) Remove MEPO and add oupsTestTrap - Brian Vo
+--    Date: Mar 14, 2013 (v1.74) Add PDU2 - Brian Vo
+--    Date: Apr 15, 2013 (v1.74) Modify pdu2InputPhaseCurrentMeasType and pdu2InputPowerWattHourTimer - Brian Vo
+--    Date: Jun 05, 2013 (v1.76) Remove oupsBatCurrent. revise oupsGeneratorDetection - Brian Vo
+--    Date: Jun 10, 2013 (v1.76) Change to enumerated value from bad (-1) to bad (3) for monitored PDU - Brian Vo
+--    Date: Mar 16, 2014 (v1.78) Add pdu2Outlet section for Managed PDU -BVo
+--    Date: Apr 07, 2014 (v1.78) Revise to outletcount, outlettype. Remove outletvoltage. Add groupBreakerStatus -BVo
+--    Date: Apr 22, 2014 (v1.78) Add pdu2OutletControlSwitchable, make consistent description of Watt-hour data -BVo
+--    Date: Oct 01, 2014 (v1.80) Add pdu2OutletControlShutoffDelay -BVo
+--    Date: May 31, 2016 (v1.82) Add support for new high voltage PDU (hpdu) -BVo
+--    Date: Jan 12, 2017 (v1.82) Add support for PDU3 monitored and managed PDU line -BVo
+--    Date: Sep 16, 2019 (v1.84) Add changes for the Dragon PDU based on Holder -Shreekanth Gonibasappa
+--
+-- :CPQ,ENDDEV:
+--    *********************************************************************
+--
+-- VARIABLES REQUIRED FOR HP MANAGEMENT
+-- ===================================================================================
+--
+-- ===================================================================================
+-- sysDescr (1.3.6.1.2.1.1.1) which is defined in RFC1213.MIB.
+-- sysObjectID (1.3.6.1.2.1.1.2) which is defined in RFC1213.MIB.
+-- sysContact (1.3.6.1.2.1.1.4) which is defined in RFC1213.MIB.
+-- sysName (1.3.6.1.2.1.1.5) is which is defined in RFC1213.MIB.
+-- sysLocation (1.3.6.1.2.1.1.6) which is defined in RFC1213.MIB.
+-- 
+-- sysDescr OBJECT-TYPE
+--     SYNTAX  DisplayString (SIZE (0..255))
+--     ACCESS  read-only
+--     STATUS  mandatory
+--     DESCRIPTION
+--             "A textual description of the entity.  This value
+--             should include the full name, hardware version and
+--             firmware version of management module's.
+--             It is mandatory that this only contain
+--             printable ASCII characters."
+--     ::= { system 1 }
+--
+-- sysObjectID OBJECT-TYPE
+--     SYNTAX  DisplayString (SIZE (0..255))
+--     ACCESS  read-write
+--     STATUS  mandatory
+--     DESCRIPTION
+--             "Return the OID of the management module
+--             for this UPS or PDU defined in the CPQPOWER.MIB
+--             i.e. .1.3.6.1.4.1.232.165.3 is for UPS OIDs."
+--     ::= { system 2 }
+--
+-- sysContact OBJECT-TYPE
+--     SYNTAX  DisplayString (SIZE (0..255))
+--     ACCESS  read-write
+--     STATUS  mandatory
+--     DESCRIPTION
+--             "The textual identification of the contact person
+--             for this managed node, together with information
+--             on how to contact this person."
+--     ::= { system 4 }
+--
+-- sysName OBJECT-TYPE
+--     SYNTAX  DisplayString (SIZE (0..255))
+--     ACCESS  read-write
+--     STATUS  mandatory
+--     DESCRIPTION
+--             "An administratively-assigned name for this
+--             managed node.  By convention, this is the node's
+--             fully-qualified domain name."
+--     ::= { system 5 }
+--
+-- sysLocation OBJECT-TYPE
+--     SYNTAX  DisplayString (SIZE (0..255))
+--     ACCESS  read-write
+--     STATUS  mandatory
+--     DESCRIPTION
+--             "The physical location of this node (e.g.,
+--             `telephone closet, 3rd floor')."
+--     ::= { system 6 }
+--
+-- ====================================================================================
+--
+-- ====================================================================================
+-- cpqSiSysSerialNum (1.3.6.1.4.1.232.2.2.2.1) which is defined in CPQSINFO.MIB.
+-- This is the PDU/UPS serial number (listed but not implemented in SNMP Agent)
+-- 
+-- 
+-- cpqSiSysSerialNum OBJECT-TYPE
+--      SYNTAX  DisplayString (SIZE (0..255))
+--      ACCESS  read-only
+--      STATUS  mandatory
+--      DESCRIPTION
+--          "The serial number of the PDU or UPS.
+--           The string will be empty if the system does not report the
+--          serial number."
+--      ::= { cpqSiAsset 1 }
+-- ===================================================================================
+--
+-- ===================================================================================
+-- cpqSiProductName (1.3.6.1.4.1.232.2.2.4.2) which is defined in CPQSINFO.MIB.
+-- This is the PDU/UPS management module product model name (listed but not implemented in SNMP Agent)
+-- 
+--
+--  cpqSiProductName OBJECT-TYPE
+--         SYNTAX  DisplayString (SIZE (0..255))
+--         ACCESS  read-only
+--         STATUS  mandatory
+--         DESCRIPTION
+--             "This device product name i.e. HP UPS Management Module"
+--         ::= { cpqSiSystemBoard 2 }
+-- ====================================================================================
+--
+-- ====================================================================================
+-- cpqHoGUID (1.3.6.1.4.1.232.11.2.10.3) which is defined in CPQHOST.MIB 
+-- This field needs to be filled with the unique ID
+-- P/N of PDU/UPS management module (16 bytes)
+--
+-- cpqHoGUID OBJECT-TYPE
+--         SYNTAX  OCTET STRING (SIZE (16))
+--         ACCESS  read-write
+--         STATUS  mandatory
+--         DESCRIPTION
+--             "The globally unique identifier of this device. UUID or P/N + SN of HP Management Module."
+--         ::= { cpqHoSystemStatus 3 }
+-- ====================================================================================
+--
+-- ====================================================================================
+-- cpqHoMibStatusArray (1.3.6.1.4.1.232.11.2.10.1) which is defined in CPQHOST.MIB 
+-- Pretty complicated to decipher if you do not have the guide.  We only use the first 
+-- 4 octets.
+--
+-- Octet 0 = 00000001 (always)
+-- Octet 1 = 00000000 through 00000100 depending on Device H/W Condition below (0000,0001, 0010, 0011, 0100)
+-- Octet 2 = 00000001 (always)
+-- Octet 3 = 00010000 (always decimal 16 see table below)
+--
+-- For example: With a UPS device with OK status, the values of the 4 octets would be:
+--
+-- Octet 0 = 0x01 (fixed)
+-- Octet 1 = 0x02 (OK overall status)
+-- Octet 2 = 0x01 (fixed)
+-- Octet 3 = 0x10 (Device type = 16 for UPS)
+--
+-- cpqHoMibStatusArray OBJECT-TYPE
+--         SYNTAX  OCTET STRING (SIZE (4..256))
+--         ACCESS  read-only
+--         STATUS  mandatory
+--         DESCRIPTION
+--             "The MIB Status Array is an array of MIB status structures. Each
+--             structure is made up of 4 octets.
+--
+--             Array element 0 is the status for all MIBs in the Compaq
+--             Enterprise.
+--
+--             Device H/W Condition based on alarm (Octet 1)
+--                0 - Not available (e.g. Loss/lack of communication between card and device UPS/PDU)  
+--                1 - Other             (unknown status) 
+--                2 - OK 		(device normal operation)
+--                3 - Degraded 	        (warning alarm)
+--                4 - Failed 		(critical alarm)
+--
+--             Detailed Type (octet 3)
+--                Bits 0-7    Detailed Type, only used if bit 0 in octect 2 is 1.
+--
+--             Type Values for Bits 0-4 (maps to CIM7 types)
+--             Unknown                    =  0
+--             Server                     =  1  (yes a duplicate of the server flag)
+--             Desktop                    =  2
+--             Workstation                =  3
+--             Portable                   =  4
+--             Router                     =  5
+--             Cluster                    =  6
+--             Printer                    =  7
+--             Switch                     =  8  (network switch)
+--             Repeater                   =  9
+--             Remote Access Device       = 10
+--             Other                      = 11
+--             Management Processor       = 12  (rib, RILOE, iLo)
+--             Rack                       = 13
+--             Enclosure                  = 14
+--             KVM Switch                 = 15  (IP enabled keyboard video mouse switch).
+--             UPS                        = 16
+--             Power Distribution Unit    = 17  (PDU)
+--             Environmental Monitor      = 18  (eg CMC)
+--             Power Distribution Rack    = 19  (PDR)"
+--         ::= { cpqHoSystemStatus 1 }
+-- ====================================================================================
+-- All Traps, Objects of CPQPOWER.MIB start with  .1.3.6.1.4.1.232.165
+
+CPQPOWER-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+    compaq        FROM CPQHOST-MIB
+--    enterprises   FROM RFC1155-SMI
+--    IpAddress     FROM RFC1155-SMI
+
+--    Counter, enterprises   FROM RFC1155-SMI
+
+--    TimeTicks     FROM RFC1155-SMI
+--    Gauge         FROM RFC1155-SMI
+    Counter       FROM RFC1155-SMI
+    DisplayString FROM RFC1213-MIB
+    ifIndex       FROM RFC1213-MIB
+    ifDescr       FROM RFC1213-MIB
+    sysName       FROM RFC1213-MIB
+    sysDescr      FROM RFC1213-MIB
+    sysContact    FROM RFC1213-MIB
+    sysLocation   FROM RFC1213-MIB  
+    OBJECT-TYPE   FROM RFC-1212
+    TRAP-TYPE     FROM RFC-1215;
+
+-- Identifiers from CPQSINFO.MIB (no longer used by HP SIM)
+-- cpqSystemInfo           OBJECT IDENTIFIER       ::= {compaq 2}
+-- cpqSiComponent          OBJECT IDENTIFIER       ::= {cpqSystemInfo 2}
+-- cpqSiSystemBoard        OBJECT IDENTIFIER       ::= {cpqSiComponent 4}
+
+-- Identifiers from CPQHOST.MIB (include when compiling)
+-- cpqHostOs               OBJECT IDENTIFIER       ::= {compaq 11}
+-- cpqHoComponent          OBJECT IDENTIFIER       ::= {cpqHostOs 2}
+-- cpqHoSystemStatus       OBJECT IDENTIFIER       ::= {cpqHoComponent 10}
+
+-- compaq                  OBJECT IDENTIFIER 	::= { enterprises 232 }
+cpqPower                OBJECT IDENTIFIER       ::= {compaq 165}
+
+--
+-- Power device object identifiers
+--
+powerDevice             OBJECT IDENTIFIER       ::= {cpqPower 1}  
+
+trapInfo                OBJECT IDENTIFIER       ::= {powerDevice 1}
+managementModuleIdent   OBJECT IDENTIFIER       ::= {powerDevice 2}
+
+--
+-- basic PDU object identifiers
+--
+pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}  
+
+pduIdent                OBJECT IDENTIFIER       ::= { pdu 1 }
+pduInput                OBJECT IDENTIFIER       ::= { pdu 2 }
+pduOutput               OBJECT IDENTIFIER       ::= { pdu 3 }
+
+--
+-- UPS object identifiers
+--
+ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+
+upsIdent                OBJECT IDENTIFIER       ::= { ups 1 }
+upsBattery              OBJECT IDENTIFIER       ::= { ups 2 }
+upsInput                OBJECT IDENTIFIER       ::= { ups 3 }
+upsOutput               OBJECT IDENTIFIER       ::= { ups 4 }
+upsBypass               OBJECT IDENTIFIER       ::= { ups 5 }
+upsEnvironment          OBJECT IDENTIFIER       ::= { ups 6 }
+upsTest                 OBJECT IDENTIFIER       ::= { ups 7 }
+upsControl              OBJECT IDENTIFIER       ::= { ups 8 }
+upsConfig               OBJECT IDENTIFIER       ::= { ups 9 }
+upsRecep                OBJECT IDENTIFIER       ::= { ups 10 }
+upsTopology             OBJECT IDENTIFIER       ::= { ups 11 }
+
+--
+-- PDR object identifiers
+--
+pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
+
+pdrIdent                OBJECT IDENTIFIER       ::= { pdr 1 }
+pdrPanel                OBJECT IDENTIFIER       ::= { pdr 2 }
+pdrBreaker              OBJECT IDENTIFIER       ::= { pdr 3 }
+
+--
+-- MPDU object identifiers
+--
+mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}  
+
+mpduIdent                OBJECT IDENTIFIER       ::= { mpdu 1 }
+mpduOutput               OBJECT IDENTIFIER       ::= { mpdu 2 }
+mpduDeviceIdent          OBJECT IDENTIFIER       ::= { mpdu 3 }
+mpduSmExtBarOutlet       OBJECT IDENTIFIER       ::= { mpdu 4 }
+
+--
+-- oups (offline UPS) object identifiers
+--
+oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
+
+oupsIdent                OBJECT IDENTIFIER       ::= { oups 1 }
+oupsBattery              OBJECT IDENTIFIER       ::= { oups 2 }
+oupsInput                OBJECT IDENTIFIER       ::= { oups 3 }
+oupsOutput               OBJECT IDENTIFIER       ::= { oups 4 }
+oupsMonitor              OBJECT IDENTIFIER       ::= { oups 5 }
+oupsRackDiscovery        OBJECT IDENTIFIER       ::= { oups 6 }
+
+--
+-- PDU Monitored Managed PDU object identifiers
+--
+pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
+
+pdu2Ident                OBJECT IDENTIFIER       ::= { pdu2 1 }
+pdu2Input                OBJECT IDENTIFIER       ::= { pdu2 2 }
+pdu2Group                OBJECT IDENTIFIER       ::= { pdu2 3 }
+pdu2Environment          OBJECT IDENTIFIER       ::= { pdu2 4 }
+pdu2Outlet               OBJECT IDENTIFIER       ::= { pdu2 5 }
+
+
+
+--
+-- HPDU High Voltage PDU object identifiers 
+--
+hpdu                    OBJECT IDENTIFIER       ::= {cpqPower 9}  
+
+hpduIdent               OBJECT IDENTIFIER       ::= { hpdu 1 }
+hpduInput   	        OBJECT IDENTIFIER       ::= { hpdu 2 }
+hpduOutlet	 			OBJECT IDENTIFIER       ::= { hpdu 3 }
+
+
+--
+-- PDU3 Monitored Managed PDU object identifiers
+--
+pdu3                     OBJECT IDENTIFIER       ::= {cpqPower 11}  
+
+pdu3Ident                OBJECT IDENTIFIER       ::= { pdu3 1 }
+pdu3Input                OBJECT IDENTIFIER       ::= { pdu3 2 }
+pdu3Group                OBJECT IDENTIFIER       ::= { pdu3 3 }
+pdu3Environment          OBJECT IDENTIFIER       ::= { pdu3 4 }
+pdu3Outlet               OBJECT IDENTIFIER       ::= { pdu3 5 }
+
+
+
+-- ====================================================================================
+--
+-- powerDevice             OBJECT IDENTIFIER       ::= {cpqPower 1}  
+-- trapInfo                OBJECT IDENTIFIER       ::= {powerDevice 1}
+-- trap information group
+-- OID= .1.3.6.1.4.1.232.165.1.1
+
+trapCode OBJECT-TYPE
+	SYNTAX INTEGER
+	ACCESS read-only
+	STATUS mandatory
+	DESCRIPTION
+		"A number identifying the event for the trap that was sent.
+		 Mapped unique trap code per unique event to be used by ISEE's
+		 decoder ring."
+	::= { trapInfo 1 }
+
+trapDescription OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..255))
+	ACCESS read-only
+	STATUS mandatory
+	DESCRIPTION
+		"A string identifying the event for that last trap that was sent."
+	::= { trapInfo 2 }
+
+trapDeviceMgmtUrl OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..255))
+	ACCESS read-only
+	STATUS mandatory
+	DESCRIPTION
+	    "A string contains the URL for the management software."
+	::= { trapInfo 3 }
+
+trapDeviceDetails OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..255))
+	ACCESS read-only
+	STATUS mandatory
+	DESCRIPTION
+		"A string details information about the UPS such as SN (serial number), 
+                 PN (part number), and MN (Model Name)."
+	::= { trapInfo 4 }
+
+trapDeviceName OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..255))
+	ACCESS read-only
+	STATUS mandatory
+	DESCRIPTION
+		"A string contains the name of the HP Management Module."
+	::= { trapInfo 5 }
+
+
+
+-- ====================================================================================
+--                      HP UPS Management Module
+-- ====================================================================================
+--
+-- powerDevice             OBJECT IDENTIFIER       ::= {cpqPower 1}  
+-- managementModuleIdent   OBJECT IDENTIFIER       ::= {powerDevice 2}
+-- Management module identification group
+-- OID= .1.3.6.1.4.1.232.165.1.2
+
+deviceManufacturer OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The device's manufacturer."
+    ::= { managementModuleIdent 1 }
+
+deviceModel OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The device's model."
+    ::= { managementModuleIdent 2 }
+
+deviceFirmwareVersion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The device's firmware version(s)."
+    ::= { managementModuleIdent 3 }
+
+deviceHardwareVersion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The device's hardware version."
+    ::= { managementModuleIdent 4 }
+
+deviceIdentName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+           "A string identifying the device. it came from sysName entered by user"
+    ::= { managementModuleIdent 5 }
+
+devicePartNumber OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The device's part number."
+    ::= { managementModuleIdent 6 }
+
+deviceSerialNumber OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The device's serial number."
+    ::= { managementModuleIdent 7 }
+
+deviceMACAddress OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The device's MAC address."
+    ::= { managementModuleIdent 8 }
+
+
+-- ====================================================================================
+--                                     PDU
+-- ====================================================================================
+--  
+--  pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}  
+--  pduIdent                OBJECT IDENTIFIER       ::= { pdu 1 }
+--  PDU identification group
+--  OID= .1.3.6.1.4.1.232.165.2.1
+
+numOfPdu OBJECT-TYPE
+    SYNTAX INTEGER (0..63)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of PDUs."
+    ::= { pduIdent 1 }
+    
+pduIdentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PduIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The Aggregate Object with number of entries equal to
+	    NumOfPdu and including the PduIdent group."
+    ::= { pduIdent 2 }
+
+pduIdentEntry OBJECT-TYPE
+    SYNTAX PduIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The ident table entry containing the name,
+	    model, manufacturer, firmware version, part number, etc."
+    INDEX { pduIdentIndex }
+    ::= { pduIdentTable 1 }
+
+PduIdentEntry ::= SEQUENCE {
+      pduIdentIndex         INTEGER,
+      pduName               DisplayString,
+      pduModel              DisplayString,
+      pduManufacturer       DisplayString,
+      pduFirmwareVersion    DisplayString,
+      pduPartNumber         DisplayString,
+      pduSerialNumber       DisplayString,
+      pduStatus             INTEGER,
+      pduControllable       INTEGER
+    }
+
+pduIdentIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the PduIdentEntry table."
+    ::= { pduIdentEntry 1 }
+
+pduName OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"The string identify the device."
+    ::= { pduIdentEntry 2 }
+
+pduModel OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Model."
+    ::= { pduIdentEntry 3 }
+
+pduManufacturer OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
+    ::= { pduIdentEntry 4 }
+
+pduFirmwareVersion OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The firmware revision level of the device."
+    ::= { pduIdentEntry 5 }
+
+pduPartNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device part number."
+    ::= { pduIdentEntry 6 }
+
+pduSerialNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device serial number."
+    ::= { pduIdentEntry 7 }
+
+pduStatus OBJECT-TYPE
+    SYNTAX  INTEGER
+    {
+      other(1),    -- default
+      ok(2),
+      degraded(3),
+      failed(4)
+    }
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the device.  A value of OK(2) indicates the device is operating normally.
+    A value of degraded(3) indicates the device is operating with warning indicators.  A value of
+    failed(4) indicates the device is operating with critical indicators."
+    ::= { pduIdentEntry 8 }
+
+pduControllable OBJECT-TYPE
+    SYNTAX  INTEGER 
+    {
+      yes(1),
+      no(2)
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "This object indicates whether or not the device is controllable."
+    ::= { pduIdentEntry 9 }
+
+-- ====================================================================================
+--
+--  pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}    
+--  pduInput                OBJECT IDENTIFIER       ::= { pdu 2 }
+--  PDU input group
+--  OID= .1.3.6.1.4.1.232.165.2.2
+
+pduInputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PduInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+           "The Aggregate Object with number of entries equal to
+	    NumOfPdu and including the PduInput group."
+    ::= {pduInput 1}
+
+pduInputEntry OBJECT-TYPE
+    SYNTAX PduInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The input table entry containing the voltage and 
+	    current for the PDU"
+    INDEX { pduInputIndex }
+    ::= { pduInputTable 1 }
+
+PduInputEntry ::= SEQUENCE {
+    pduInputIndex   INTEGER,
+    inputVoltage    INTEGER,
+    inputCurrent    INTEGER
+    }
+
+pduInputIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the PduInputEntry table."
+    ::= { pduInputEntry 1}
+
+inputVoltage OBJECT-TYPE
+    SYNTAX INTEGER  (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input voltage from the PDU meters in volts."
+    ::= {pduInputEntry 2}
+
+inputCurrent OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS 0.01 Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input current from the PDU meters in hundredths of Amp."
+    ::= {pduInputEntry 3}
+
+-- ====================================================================================
+--
+--  pdu                     OBJECT IDENTIFIER       ::= {cpqPower 2}  
+--  pduOutput               OBJECT IDENTIFIER       ::= { pdu 3 }
+--  PDU Output group
+--  OID= .1.3.6.1.4.1.232.165.2.3
+
+pduOutputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PduOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The Aggregate Object with number of entries equal to
+	    NumOfPdu and including the PduInput group."
+    ::= {pduOutput 1}
+
+pduOutputEntry OBJECT-TYPE
+    SYNTAX PduOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The input table entry containing the name,
+	    heat load, current load, power load, firmware, etc."
+    INDEX { pduOutputIndex }
+    ::= { pduOutputTable 1 }
+
+PduOutputEntry ::= SEQUENCE {
+    pduOutputIndex         INTEGER,
+    pduOutputLoad          INTEGER,
+    pduOutputHeat          INTEGER,
+    pduOutputPower         INTEGER,
+    pduOutputNumBreakers   INTEGER
+    }
+
+pduOutputIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the PduOutputEntry table."
+    ::= { pduOutputEntry 1}
+
+pduOutputLoad OBJECT-TYPE
+    SYNTAX INTEGER (0..200)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device output load in percent of rated capacity.  A value of -1 will be
+		returned if the heat load is unable to be measured."
+    ::= { pduOutputEntry 2 }
+
+pduOutputHeat OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units BTU
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    "The total heat load measured on the PDU in BTUs.  A value of -1 will be
+		returned if the heat load is unable to be measured."
+    ::= { pduOutputEntry 3 }
+
+pduOutputPower OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    "The total power load measured on the PDU in watts.  A value of -1 will be
+		returned if the power load is unable to be measured."
+    ::= { pduOutputEntry 4 }
+
+pduOutputNumBreakers OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The number of breakers for the device.  This variable indicates the number 
+           of rows in the breakers table."
+    ::= { pduOutputEntry 5 }
+
+pduOutputBreakerTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF PduOutputBreakerEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+           "List of breaker table entries.  The number of entries is given by pduOutputNumBreakers ."
+    ::= { pduOutput 2 }
+
+pduOutputBreakerEntry OBJECT-TYPE
+    SYNTAX  PduOutputBreakerEntry 
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+           "An entry containing information applicable to an breaker."
+    INDEX   { pduOutputIndex, breakerIndex }
+    ::= { pduOutputBreakerTable 1 }
+
+PduOutputBreakerEntry ::=
+    SEQUENCE 
+    {
+      breakerIndex       INTEGER,
+      breakerVoltage     INTEGER,
+      breakerCurrent     INTEGER,
+      breakerPercentLoad INTEGER,
+      breakerStatus      INTEGER
+    }
+
+breakerIndex OBJECT-TYPE
+    SYNTAX  INTEGER 	(0..100)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The breaker identifier."
+    ::= { pduOutputBreakerEntry 1 }
+
+breakerVoltage OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS Volts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The breaker voltage in volts."
+    ::= { pduOutputBreakerEntry 2 }
+
+breakerCurrent OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS 0.01 Amps
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The breaker current draw in hundredths of Amp."
+    ::= { pduOutputBreakerEntry 3 }
+
+breakerPercentLoad OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS Percent
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The breaker load in percent."
+    ::= { pduOutputBreakerEntry 4 }
+
+breakerStatus OBJECT-TYPE
+    SYNTAX  INTEGER 
+    {
+      normal(1),
+      overloadWarning(2),
+      overloadCritical(3),
+      voltageRangeWarning(4),
+      voltageRangeCritical(5)
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "This object indicates the status of the breaker.  A value of normal(1)
+		indicates the breaker is operating normally.  A value of overloadWarning(2)
+		indicates the breaker has an overload warning.  A value of overloadCritical(3)
+		indicates the breaker is overloaded.  A value of voltageRangeWarning(4)
+		indicates the breaker voltage is out of tolerance by 10-20%.  A value of
+		voltageRangeCritical(5) indicates the breaker voltage is out of tolerance
+		by more than 20%.  Note: Overload status has priority over voltage tolerance
+		status."
+    ::= { pduOutputBreakerEntry 5 }
+
+
+-- ====================================================================================
+--                            UPS
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsIdent                OBJECT IDENTIFIER       ::= { ups 1 }
+--  UPS Identification group
+--  OID= .1.3.6.1.4.1.232.165.3.1
+
+upsIdentManufacturer OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..31))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The UPS Manufacturer Name (e.g. Hewlett-Packard)."
+    ::= { upsIdent 1 }
+
+upsIdentModel OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The UPS Model;Part number;Serial number (e.g. HP R5500 XR;204451-B21;B00123456W)."
+    ::= { upsIdent 2 }
+
+upsIdentSoftwareVersions OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The firmware revision level(s) of the UPS microcontroller(s)."
+    ::= { upsIdent 3 }
+
+upsIdentOemCode OBJECT-TYPE
+    SYNTAX INTEGER (0..255)  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"A binary code indicating vendor. This should be a ?0x0c? for HP"
+    ::= { upsIdent 4 }
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsBattery              OBJECT IDENTIFIER       ::= { ups 2 }
+--  UPS Battery group
+--  OID= .1.3.6.1.4.1.232.165.3.2
+
+upsBatTimeRemaining OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS seconds
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery run time in seconds before UPS turns off due
+	 to low battery."
+    ::= { upsBattery 1 }
+
+upsBatVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Volts DC
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery voltage as reported by the UPS meters."
+    ::= { upsBattery 2 }
+
+upsBatCurrent OBJECT-TYPE
+    SYNTAX INTEGER (-2147483648..2147483647)   -- UNITS Amp DC
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery Current as reported by the UPS metering.
+	 Current is positive when discharging, negative
+	 when recharging the battery."
+    ::= { upsBattery 3 }
+
+upsBatCapacity OBJECT-TYPE
+    SYNTAX INTEGER (0..100)    -- UNITS percent
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery percent charge."
+    ::= { upsBattery 4 }
+
+upsBatteryAbmStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+    batteryCharging(1),
+    batteryDischarging(2),
+    batteryFloating(3),
+    batteryResting(4),
+    unknown(5)
+	}
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"Gives the status of the Advanced Battery Management;
+	 batteryFloating(3) status means that the charger is temporarily 
+	 charging the battery to its float voltage; batteryResting(4) is the 
+	 state when the battery is fully charged and none of the other actions 
+	 (charging/discharging/floating) is being done."
+    ::= { upsBattery 5 }
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsInput                OBJECT IDENTIFIER       ::= { ups 3 }
+--  UPS Input group
+--  OID= .1.3.6.1.4.1.232.165.3.3
+
+upsInputFrequency OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The utility line frequency in tenths of Hz."
+    ::= { upsInput 1 }
+
+upsInputLineBads OBJECT-TYPE
+    SYNTAX Counter
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of times the Input was out of tolerance
+	in voltage or frequency."
+    ::= { upsInput 2 }
+
+upsInputNumPhases OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    ::= { upsInput 3 }
+
+upsInputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UpsInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The Aggregate Object with number of entries equal to
+	         NumPhases and including the UpsInput group."
+    ::= { upsInput 4 }
+
+upsInputEntry OBJECT-TYPE
+    SYNTAX UpsInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The input table entry containing the current, voltage, etc."
+    INDEX { upsInputPhase }
+    ::= { upsInputTable 1 }
+
+UpsInputEntry ::= SEQUENCE {
+    upsInputPhase     INTEGER,
+    upsInputVoltage   INTEGER,
+    upsInputCurrent   INTEGER,
+    upsInputWatts     INTEGER
+    }
+
+upsInputPhase OBJECT-TYPE
+    SYNTAX INTEGER  (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of the phase.  Serves as index for input table."
+    ::= { upsInputEntry 1 }
+
+upsInputVoltage OBJECT-TYPE
+    SYNTAX INTEGER  (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input voltage from the UPS meters in volts."
+    ::= { upsInputEntry 2 }
+
+upsInputCurrent OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input current from the UPS meters in amps."
+    ::= { upsInputEntry 3 }
+
+upsInputWatts OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input real power in watts. Most UPSs do not report
+         this XCP data"
+    ::= { upsInputEntry 4 }
+
+upsInputSource OBJECT-TYPE
+    SYNTAX  INTEGER {
+    other(1),
+
+    none(2),                	-- For example, Utility failure
+    primaryUtility(3),		-- Normal utility feed to the UPS
+    bypassFeed(4),          	-- Bypass utility, separate from primaryUtility
+    secondaryUtility(5),    	-- Secondary utility feed (on a dual AC input UPS)
+    generator(6),			-- Power provided by a generator
+    flywheel(7),			-- Power provided by a flywheel (not necessarily AC)
+    fuelcell(8) 			-- Power provided by fuel cell(s) (not necessarily AC)
+    }
+    ACCESS  read-only
+
+    STATUS  mandatory
+    DESCRIPTION
+	   "The present external source of input power.  The enumeration
+	       none(2) indicates that there is no external source of 
+	       power, for example, the UPS is On Battery (an internal source).
+	       The bypassFeed(4) can only be used when the Bypass source is known
+	       to be a separate utility feed than the primaryUtility(3)."
+    ::= { upsInput 5 }
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsOutput               OBJECT IDENTIFIER       ::= { ups 4 }
+--  UPS Output group
+--  OID= .1.3.6.1.4.1.232.165.3.4
+
+upsOutputLoad OBJECT-TYPE
+    SYNTAX INTEGER (0..200)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The UPS output load in percent of rated capacity."
+    ::= { upsOutput 1 }
+
+upsOutputFrequency OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured UPS output frequency in tenths of Hz."
+    ::= { upsOutput 2 }
+
+upsOutputNumPhases OBJECT-TYPE
+    SYNTAX INTEGER  (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of metered output phases, serves as the table
+	 index."
+    ::= { upsOutput 3 }
+
+upsOutputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UpsOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+	"The Aggregate Object with number of entries equal to NumPhases
+	and including the UpsOutput group."
+    ::= { upsOutput 4 }
+
+upsOutputEntry OBJECT-TYPE
+    SYNTAX UpsOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+	"Output Table Entry containing voltage, current, etc."
+    INDEX { upsOutputPhase }
+    ::= { upsOutputTable 1 }
+
+UpsOutputEntry ::= SEQUENCE {
+    upsOutputPhase       INTEGER,
+    upsOutputVoltage     INTEGER,
+    upsOutputCurrent     INTEGER,
+    upsOutputWatts       INTEGER
+    }
+
+upsOutputPhase OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number {1..3} of the output phase."
+    ::= { upsOutputEntry 1 }
+
+upsOutputVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured output voltage from the UPS metering in volts."
+    ::= { upsOutputEntry 2 }
+
+upsOutputCurrent OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured UPS output current in amps."
+    ::= { upsOutputEntry 3 }
+
+upsOutputWatts OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured real output power in watts."
+    ::= { upsOutputEntry 4 }
+
+upsOutputSource OBJECT-TYPE
+    SYNTAX  INTEGER {
+    other(1),
+    none(2),
+    normal(3),				-- normal, single UPS module output
+    bypass(4),
+    battery(5),
+    booster(6),				-- Single or Double Boost, line-interactive UPSs only
+    reducer(7),				-- Buck, line-interactive UPSs only
+    parallelCapacity(8),		-- normal enhanced by Parallel for Capacity operation
+    parallelRedundant(9),		-- normal enhanced by Redundant Parallel operation
+    highEfficiencyMode(10)		-- normal enhanced by High Efficiency mode
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	   "The present source of output power.  The enumeration
+	       none(2) indicates that there is no source of output
+	       power (and therefore no output power), for example,
+	       the system has opened the output breaker."
+    ::= { upsOutput  5 }
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsBypass               OBJECT IDENTIFIER       ::= { ups 5 }
+--  UPS Bypass group
+--  OID= .1.3.6.1.4.1.232.165.3.5
+
+upsBypassFrequency OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The bypass frequency in tenths of Hz."
+    ::= { upsBypass 1 }
+
+upsBypassNumPhases OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of lines in the UPS bypass table."
+    ::= { upsBypass 2 }
+
+upsBypassTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF UpsBypassEntry
+    ACCESS not-accessible 
+    STATUS mandatory
+    ::= { upsBypass 3 }
+
+upsBypassEntry OBJECT-TYPE
+    SYNTAX UpsBypassEntry
+    ACCESS not-accessible 
+    STATUS mandatory
+    DESCRIPTION
+	"Entry in the UpsBypassTable."
+    INDEX { upsBypassPhase }
+    ::= { upsBypassTable  1 }
+
+UpsBypassEntry ::= SEQUENCE {
+    upsBypassPhase    INTEGER,
+    upsBypassVoltage  INTEGER
+    }
+
+upsBypassPhase OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Bypass Phase, index for the table."
+    ::= { upsBypassEntry 1 }
+
+upsBypassVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured UPS bypass voltage in volts."
+    ::= { upsBypassEntry 2 }
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsEnvironment          OBJECT IDENTIFIER       ::= { ups 6 }
+--  UPS Environment group
+--  OID= .1.3.6.1.4.1.232.165.3.6
+
+upsEnvAmbientTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the ambient temperature in the vicinity of the 
+        UPS or SNMP agent."
+    ::= { upsEnvironment  1 }
+
+upsEnvAmbientLowerLimit OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+       "The Lower Limit of the ambient temperature; if UpsEnvAmbientTemp 
+	falls below this value, the UpsAmbientTempBad alarm will occur."
+    ::= { upsEnvironment  2 }
+
+upsEnvAmbientUpperLimit OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+       "The Upper Limit of the ambient temperature; if UpsEnvAmbientTemp 
+	rises above this value, the UpsAmbientTempBad alarm will occur.
+	This value should be greater than UpsEnvAmbientLowerLimit."
+    ::= { upsEnvironment  3 }
+
+upsEnvAmbientHumidity OBJECT-TYPE
+    SYNTAX  INTEGER (0..100)   -- UNITS %
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the ambient humidity in the vicinity of the 
+        UPS or SNMP agent."
+    ::= { upsEnvironment  4 }
+
+upsEnvRemoteTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of a remote temperature sensor connected to the  
+        UPS or SNMP agent."
+    ::= { upsEnvironment  5 }
+
+upsEnvRemoteHumidity OBJECT-TYPE
+    SYNTAX  INTEGER (0..100)   -- UNITS %
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of a remote humidity sensor connected to the 
+        UPS or SNMP agent."
+    ::= { upsEnvironment  6 }
+
+--
+-- The Environmental Contact Sensing Table
+--      Contains the table for monitoring all contacts (digital 
+--      inputs).
+--
+
+upsEnvNumContacts OBJECT-TYPE
+    SYNTAX  INTEGER (1..1024)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	   "The number of Contacts in the UpsContactsTable.
+		This object indicates the number of rows in the 
+		UpsContactsTable."
+    ::= { upsEnvironment  7 }
+
+upsContactsTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF UpsContactsTableEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+	   "A list of Contact Sensing table entries.  
+		The number of entries is given by the value of 
+		UpsEnvNumContacts."
+    ::= { upsEnvironment  8 }
+
+upsContactsTableEntry OBJECT-TYPE
+    SYNTAX  UpsContactsTableEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+	   "An entry containing information applicable 
+		to a particular Contact input."
+    INDEX   { upsContactIndex }
+    ::= { upsContactsTable  1 }
+
+UpsContactsTableEntry ::= SEQUENCE {
+    upsContactIndex     INTEGER,
+    upsContactType      INTEGER,
+    upsContactState     INTEGER,
+    upsContactDescr     DisplayString
+    }
+
+upsContactIndex OBJECT-TYPE
+    SYNTAX  INTEGER (1..1024)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	   "The Contact identifier; identical to the Contact Number."
+    ::= { upsContactsTableEntry  1 }
+
+upsContactType OBJECT-TYPE
+    SYNTAX  INTEGER {
+    normallyOpen(1),            -- or Input Normally High
+    normallyClosed(2),          -- or Input Normally Low
+    anyChange(3),               -- No normal Open/Closed state
+    notUsed(4)                  -- Contact not in service
+    }
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+	   "The normal state for this contact.  The 'other'
+	    state is the Active state for generating the UpstdContactActiveNotice
+	    trap.  If anyChange(3) is selected, then this trap is sent
+        any time the contact changes to either Open or Closed.
+        No traps are sent if the Contact is set to notUsed(4).
+        In many cases, the configuration for Contacts may be done by other 
+        means, so this object may be read-only."
+    ::= { upsContactsTableEntry  2 }
+
+upsContactState OBJECT-TYPE
+    SYNTAX  INTEGER {
+    open(1),
+    closed(2),
+    openWithNotice(3),
+    closedWithNotice(4)
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	   "The current state of the Contact input;
+		the value is based on the open/closed input state 
+		and the setting for UpsContactType.
+		When entering the openWithNotice(3) and closedWithNotice(4) 
+        states, no entries added to the UpsAlarmTable, but
+        the UpstdContactActiveNotice trap is sent."
+    ::= { upsContactsTableEntry  3 }
+
+upsContactDescr OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..63))
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+	   "A label identifying the Contact.  This object should be
+	    set by the administrator."
+    ::= { upsContactsTableEntry  4 }
+
+upsEnvRemoteTempLowerLimit OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+       "The Lower Limit of the remote temperature; if UpsEnvRemoteTemp 
+	falls below this value, the UpsRemoteTempBad alarm will occur."
+    ::= { upsEnvironment  9 }
+
+upsEnvRemoteTempUpperLimit OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS Degrees Centigrade
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+       "The Upper Limit of the remote temperature; if UpsEnvRemoteTemp 
+	rises above this value, the UpsRemoteTempBad alarm will occur.
+	This value should be greater than UpsEnvRemoteTempLowerLimit."
+    ::= { upsEnvironment  10 }
+
+upsEnvRemoteHumidityLowerLimit OBJECT-TYPE
+    SYNTAX  INTEGER (0..100)   -- UNITS %
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+       "The Lower Limit of the remote humidity reading; if UpsEnvRemoteHumidity
+	falls below this value, the UpsRemoteHumidityBad alarm will occur."
+    ::= { upsEnvironment  11 }
+
+upsEnvRemoteHumidityUpperLimit OBJECT-TYPE
+    SYNTAX  INTEGER (0..100)   -- UNITS %
+    ACCESS  read-write
+    STATUS  mandatory
+    DESCRIPTION
+       "The Upper Limit of the remote humidity reading; if UpsEnvRemoteHumidity 
+	rises above this value, the UpsRemoteHumidityBad alarm will occur.
+	This value should be greater than UpsEnvRemoteHumidityLowerLimit."
+    ::= { upsEnvironment  12 }
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsTest                 OBJECT IDENTIFIER       ::= { ups 7 }
+--  UPS Test group
+--  OID= .1.3.6.1.4.1.232.165.3.7
+
+
+upsTestBattery OBJECT-TYPE
+    SYNTAX INTEGER { startTest (1) }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting this variable to startTest initiates the
+	 battery test.  All other set values are invalid."
+    ::= { upsTest 1 }
+
+upsTestBatteryStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+    unknown (1),
+    passed (2),
+    failed (3),
+    inProgress (4),
+    notSupported (5),
+    inhibited (6),
+	scheduled (7)
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Reading this enumerated value gives an indication of the
+	 UPS Battery test status."
+    ::= { upsTest 2 }
+
+upsTestTrap OBJECT-TYPE
+    SYNTAX INTEGER { startTestTrap (1) }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting startTestTrap to 1 will initiate a TrapTest
+	 is sent out from HPMM.  All other set values are invalid."
+    ::= { upsTest 3 }
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsControl              OBJECT IDENTIFIER       ::= { ups 8 }
+--  UPS Control group
+--  OID= .1.3.6.1.4.1.232.165.3.8
+
+
+upsControlOutputOffDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting this value to other than zero will cause the UPS
+	 output to turn off after the number of seconds.
+	 Setting it to 0 will cause an attempt to abort a pending
+	 shutdown."
+    ::= { upsControl 1 }
+
+upsControlOutputOnDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting this value to other than zero will cause the UPS
+	 output to turn on after the number of seconds.
+	 Setting it to 0 will cause an attempt to abort a pending
+	 startup."
+    ::= { upsControl 2 }
+
+upsControlOutputOffTrapDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"When UpsControlOutputOffDelay reaches this value, a trap will
+	 be sent."
+    ::= { upsControl 3 }
+
+upsControlOutputOnTrapDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS deprecated
+    DESCRIPTION
+	"When UpsControlOutputOnDelay reaches this value, a
+	 UpsOutputOff trap will be sent."
+    ::= { upsControl 4 }
+
+upsControlToBypassDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting this value to other than zero will cause the UPS
+	 output to go to Bypass after the number of seconds.
+		 If the Bypass is unavailable, this may cause the UPS
+		 to not supply power to the load.
+	 Setting it to 0 will cause an attempt to abort a pending
+	 shutdown."
+    ::= { upsControl 5 }
+
+upsLoadShedSecsWithRestart OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting this value will cause the UPS output to turn off 
+	 after the set number of seconds, then restart (after a UPS-defined
+	 'down time') when the utility is again available.  
+	 Unlike UpsControlOutputOffDelay, which might or might not,
+       this object always maps to the XCP 0x8A Load Dump & Restart command,
+       so the desired shutdown and restart behavior is guaranteed to happen.
+	 Once set, this command cannot be aborted.
+       This is the preferred Control object to use when performing an On
+       Battery OS Shutdown."
+    ::= { upsControl 6 }
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsConfig               OBJECT IDENTIFIER       ::= { ups 9 }
+--  UPS Config group
+--  OID= .1.3.6.1.4.1.232.165.3.9
+
+
+upsConfigOutputVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The nominal UPS Output voltage per phase in volts."
+    ::= { upsConfig 1 }
+
+upsConfigInputVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The nominal UPS Input voltage per phase in volts."
+    ::= { upsConfig 2 }
+
+upsConfigOutputWatts OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The nominal UPS available real power output in watts."
+    ::= { upsConfig  3}
+
+upsConfigOutputFreq OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The nominal output frequency in tenths of Hz."
+    ::= { upsConfig 4 }
+
+upsConfigDateAndTime OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..22))
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Date and time information for the UPS.  Setting this variable
+	 will initiate a set UPS date and time to this value.  Reading
+	 this variable will return the UPS time and date.  This value
+	 is not referenced to sysUpTime.  It is simply the clock value
+	 from the UPS real time clock.
+	 Format is as follows: MM/DD/YYYY:HH:MM:SS."
+    ::= { upsConfig 5 }
+
+upsConfigLowOutputVoltageLimit OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Lower limit for acceptable Output Voltage, per the UPS
+	 specifications."
+    ::= { upsConfig 6 }
+
+upsConfigHighOutputVoltageLimit OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Upper limit for acceptable Output Voltage, per the UPS
+	 specifications."
+    ::= { upsConfig 7 }
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsRecep                OBJECT IDENTIFIER       ::= { ups 10 }
+--  UPS Recep group
+--
+--  (Note that the terms Receptacle, Outlet, and Load Group are used interchangeably
+--  here and all mean "one of a set of controllable, power-switched outputs")
+--  OID= .1.3.6.1.4.1.232.165.3.10
+
+
+upsNumReceptacles OBJECT-TYPE
+	SYNTAX INTEGER (0..64)
+	ACCESS read-only
+	STATUS mandatory
+    DESCRIPTION
+	"The number of independently controllable Receptacles, as described in the 
+	UpsRecepTable."
+	::= { upsRecep 1 }
+	
+upsRecepTable OBJECT-TYPE
+	SYNTAX SEQUENCE OF UpsRecepEntry
+	ACCESS not-accessible
+	STATUS mandatory
+	DESCRIPTION "The Aggregate Object with number of entries equal to
+		    NumReceptacles and including the UpsRecep group."
+	::={ upsRecep 2 }
+	
+upsRecepEntry OBJECT-TYPE
+	SYNTAX UpsRecepEntry
+	ACCESS not-accessible
+	STATUS mandatory
+	DESCRIPTION "The Recep table entry, etc."
+	INDEX { upsRecepIndex }
+	::= { upsRecepTable 1 }
+
+UpsRecepEntry ::= SEQUENCE {
+    upsRecepIndex                   INTEGER,
+    upsRecepStatus                  INTEGER,
+    upsRecepOffDelaySecs            INTEGER,
+    upsRecepOnDelaySecs             INTEGER,
+    upsRecepAutoOffDelay            INTEGER,
+    upsRecepAutoOnDelay             INTEGER,
+    upsRecepShedSecsWithRestart     INTEGER 
+	}
+	
+upsRecepIndex OBJECT-TYPE
+	SYNTAX INTEGER (1..64)
+	ACCESS read-only
+	STATUS mandatory
+	DESCRIPTION
+	"The number of the Receptacle. Serves as index for Receptacle table."
+	::= { upsRecepEntry 1 }
+	
+upsRecepStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+		on(1), off(2), pendingOff(3), pendingOn(4), unknown(5) }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+    "The Recep Status 1=On/Close, 2=Off/Open, 3=On w/Pending Off, 
+    4=Off w/Pending ON, 5=Unknown."
+	::={ upsRecepEntry 2 }		
+
+upsRecepOffDelaySecs OBJECT-TYPE
+    SYNTAX INTEGER (-1..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"The Delay until the Receptacle is turned Off.  Setting 
+	this value to other than -1 will cause the UPS output to 
+	turn off after the number of seconds (0 is immediately).  
+	Setting it to -1 will cause an attempt to abort a pending shutdown.
+	When this object is set while the UPS is On Battery, it is not necessary
+	to set UpsRecepOnDelaySecs, since the outlet will turn back on 
+	automatically when power is available again."
+	::= { upsRecepEntry 3 }
+
+upsRecepOnDelaySecs OBJECT-TYPE
+    SYNTAX INTEGER (-1..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	" The Delay until the Receptacle is turned On.  Setting 
+	this value to other than -1 will cause the UPS output to 
+	turn on after the number of seconds (0 is immediately).  
+	Setting it to -1 will cause an attempt to abort a pending restart."
+	::={ upsRecepEntry 4 }
+
+
+upsRecepAutoOffDelay OBJECT-TYPE
+    SYNTAX INTEGER (-1..32767)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"The delay after going On Battery until the Receptacle is 
+	automatically turned Off.  A value of -1 means that this Output should 
+	never be turned Off automatically, but must be turned Off only by command.
+	Values from 0 to 30 are valid, but probably innappropriate.
+	The AutoOffDelay can be used to prioritize loads in the event of a prolonged 
+	power outage; less critical loads will turn off earlier to extend battery 
+	time for the more critical loads. If the utility power is restored before the 
+	AutoOff delay counts down to 0 on an outlet, that outlet will not turn Off."
+	::= { upsRecepEntry 5 }
+	
+upsRecepAutoOnDelay OBJECT-TYPE
+    SYNTAX INTEGER (-1..32767)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Seconds delay after the Outlet is signaled to turn On before the Output is
+	Automatically turned ON. A value of -1 means that this Output should never
+	be turned On automatically, but only when specifically commanded to do so.
+	A value of 0 means that the Receptacle should come On immediately
+	at power-up or for an On command."
+	::= { upsRecepEntry 6 }
+
+-- UpsRecepAutoOnDelay has three purposes: 
+-- 1. To coordinate the automatic startup of various outlets, when the normal 
+-- auto-sequencing of 1 second per outlet is not adequate. For example, they may 
+-- be used to power up hard disk arrays before CPU units are started. 
+-- 2. To force additional 'Down Time' during UpsRecepOffDelaySecs commands, for 
+-- equipment to be reset, when the standard 'Down Time' is not long enough. 
+-- 3. For the -1 value, to ensure that loads won?t be powered until commanded, 
+-- following power-up or a UpsRecepOffDelaySecs command.
+
+upsRecepShedSecsWithRestart OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)    -- UNITS seconds
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting this value will cause the UPS output to turn off 
+	 after the set number of seconds, then restart (after a UPS-defined
+	 'down time') when the utility is again available.  
+	 Unlike UpsRecepOffDelaySecs, which might or might not,
+       this object always maps to the XCP 0x8A Load Dump & Restart command,
+       so the desired shutdown and restart behavior is guaranteed to happen.
+	 Once set, this command cannot be aborted."
+    ::= { upsRecepEntry 7 }
+
+
+
+-- ====================================================================================
+--
+--  ups                     OBJECT IDENTIFIER       ::= {cpqPower 3}  
+--  upsTopology             OBJECT IDENTIFIER       ::= { ups 11 }
+--  UPS Topology group
+--  OID= .1.3.6.1.4.1.232.165.3.11
+
+
+upsTopologyType OBJECT-TYPE
+	SYNTAX INTEGER (0..32767)
+	ACCESS read-only
+	STATUS mandatory
+    DESCRIPTION
+	"Value which denotes the type of UPS by its power topology.  Values are the
+	same as those described in the XCP Topology block's Overall Topology field."
+	::= { upsTopology 1 }
+
+upsTopoMachineCode OBJECT-TYPE
+	SYNTAX INTEGER (0..32767)
+	ACCESS read-only
+	STATUS mandatory
+    DESCRIPTION
+  	"ID Value which denotes the Compaq/HP model of the UPS for software.  Values 
+	are the same as those described in the XCP Configuration block's Machine Code 
+	field."
+	::= { upsTopology 2 }
+
+upsTopoUnitNumber OBJECT-TYPE
+	SYNTAX INTEGER (0..64)
+	ACCESS read-only
+	STATUS mandatory
+    DESCRIPTION
+	"Identifies which unit and what type of data is being reported.
+	A value of 0 means that this MIB information comes from the top-level system 
+	view (eg, manifold module or system bypass cabinet reporting total system 
+	output).  Standalone units also use a value of 0, since they are the 'full 
+	system' view.
+	A value of 1 or higher indicates the number of the module in the system
+	which is reporting only its own data in the HP MIB objects."
+	::= { upsTopology 3 }
+
+upsTopoPowerStrategy OBJECT-TYPE
+    SYNTAX INTEGER {
+		highAlert(1), standard(2), enableHighEfficiency(3),
+		immediateHighEfficiency(4) }
+	ACCESS read-write
+	STATUS mandatory
+    DESCRIPTION
+	"Value which denotes which Power Strategy is currently set for the UPS.
+	The values are:
+	highAlert(1) - The UPS shall optimize its operating state to maximize its 
+			power-protection levels.  This mode will be held for at most 24 hours.
+	standard(2) - Balanced, normal power protection strategy. UPS will not enter 
+			HE operating mode from this setting.
+	enableHighEfficiency(3) - The UPS is enabled to enter HE operating mode to 
+			optimize its operating state to maximize its efficiency, when 
+			conditions change to permit it (as determined by the UPS).
+	forceHighEfficiency(4) - If this value is permitted to be Set for this UPS,
+			and if conditions permit, requires the UPS to enter High Efficiency 
+			mode now, without delay (for as long as utility conditions permit).
+			After successfully set to forceHighEfficiency(4), 
+			UpsTopoPowerStrategy changes to value enableHighEfficiency(3).
+	UpsOutputSource will indicate if the UPS status is actually operating in 
+	High Efficiency mode."
+	::= { upsTopology 4 }
+
+-- ====================================================================================
+--                        Power Distribution Rack
+-- ====================================================================================
+-- 
+--  pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
+--  pdrIdent                OBJECT IDENTIFIER       ::= { pdr 1 }
+--  PDR identification group
+--  OID= .1.3.6.1.4.1.232.165.4.1
+
+pdrName OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"The string identify the device."
+    ::= { pdrIdent 1 }
+
+pdrModel OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Model."
+    ::= { pdrIdent 2 }
+
+pdrManufacturer OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
+    ::= { pdrIdent 3 }
+
+pdrFirmwareVersion OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The firmware revision level of the device."
+    ::= { pdrIdent 4 }
+
+pdrPartNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device part number."
+    ::= { pdrIdent 5 }
+
+pdrSerialNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The PDR's serial number."
+    ::= { pdrIdent 6 }
+
+pdrVARating OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Volts-amps
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The VA Rating of this PDR (all phases)"
+    ::= { pdrIdent 7 }
+
+pdrNominalOutputVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The nominal Output Voltage may differ from the nominal 
+         Input Voltage if the PDR has an input transformer"
+    ::= { pdrIdent 8 }
+
+pdrNumPhases OBJECT-TYPE
+    SYNTAX INTEGER (1..3)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of phases for this PDR"
+    ::= { pdrIdent 9 }
+
+pdrNumPanels OBJECT-TYPE
+    SYNTAX INTEGER (0..100)  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of panels or subfeeds in this PDR"
+    ::= { pdrIdent 10 }
+
+pdrNumBreakers OBJECT-TYPE
+    SYNTAX INTEGER (0..100)  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of breakers in this PDR"
+    ::= { pdrIdent 11 }
+
+-- ====================================================================================
+--
+--  pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
+--  pdrPanel                OBJECT IDENTIFIER       ::= { pdr 2 }
+--  PDR Panel Meters
+--  OID= .1.3.6.1.4.1.232.165.4.2
+
+pdrPanelTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF PdrPanelEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to
+	         pdrNumPanels"
+    ::= { pdrPanel 1 }
+
+pdrPanelEntry OBJECT-TYPE
+    SYNTAX PdrPanelEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The panel table entry containing all power parameters 
+            for each panel."
+    INDEX { pdrPanelIndex }
+    ::= { pdrPanelTable 1 }
+
+PdrPanelEntry ::= SEQUENCE {
+    pdrPanelIndex             INTEGER,
+    pdrPanelFrequency         INTEGER,
+    pdrPanelPower             INTEGER,
+    pdrPanelRatedCurrent      INTEGER,
+    pdrPanelMonthlyKWH        INTEGER,
+    pdrPanelYearlyKWH         INTEGER,
+    pdrPanelTotalKWH          INTEGER,
+    pdrPanelVoltageA          INTEGER,
+    pdrPanelVoltageB          INTEGER,
+    pdrPanelVoltageC          INTEGER,
+    pdrPanelCurrentA          INTEGER,
+    pdrPanelCurrentB          INTEGER,
+    pdrPanelCurrentC          INTEGER,
+    pdrPanelLoadA             INTEGER,
+    pdrPanelLoadB             INTEGER,
+    pdrPanelLoadC             INTEGER
+    }
+
+pdrPanelIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..10)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the pdrPanelEntry table."
+    ::= { pdrPanelEntry 1}
+
+pdrPanelFrequency OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS  0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The present frequency reading for the panel voltage."
+    ::= { pdrPanelEntry 2 }
+
+pdrPanelPower OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.1 KW
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The present power of the panel."
+    ::= { pdrPanelEntry 3 }
+
+pdrPanelRatedCurrent OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.1 A
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The present rated current of the panel."
+    ::= { pdrPanelEntry 4 }
+
+pdrPanelMonthlyKWH OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The accumulated KWH for this panel since the beginning of this 
+         calendar month or since the last reset."
+    ::= { pdrPanelEntry 5 }
+
+pdrPanelYearlyKWH OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The accumulated KWH for this panel since the beginning of this 
+         calendar year or since the last reset."
+    ::= { pdrPanelEntry 6 }
+
+pdrPanelTotalKWH OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The accumulated KWH for this panel since it was put into service 
+         or since the last reset."
+    ::= { pdrPanelEntry 7 }
+
+pdrPanelVoltageA OBJECT-TYPE
+    SYNTAX INTEGER  (0..2147483647)  -- UNITS 0.1 V
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured panel output voltage."
+    ::= {pdrPanelEntry 8}
+
+pdrPanelVoltageB OBJECT-TYPE
+    SYNTAX INTEGER  (0..2147483647)  -- UNITS 0.1 V
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured panel output voltage."
+    ::= {pdrPanelEntry 9}
+
+pdrPanelVoltageC OBJECT-TYPE
+    SYNTAX INTEGER  (0..2147483647)  -- UNITS 0.1 V
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured panel output voltage."
+    ::= {pdrPanelEntry 10}
+
+pdrPanelCurrentA OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 A
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured panel output current."
+    ::= {pdrPanelEntry 11}
+
+pdrPanelCurrentB OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 A
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured panel output current."
+    ::= {pdrPanelEntry 12}
+
+pdrPanelCurrentC OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 A
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured panel output current."
+    ::= {pdrPanelEntry 13}
+
+pdrPanelLoadA OBJECT-TYPE
+    SYNTAX INTEGER (0..200)  -- UNITS 0.1 percent
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The percentage of load is the ratio of each output 
+         current to the rated output current to the panel."
+    ::= {pdrPanelEntry 14}
+
+pdrPanelLoadB OBJECT-TYPE
+    SYNTAX INTEGER (0..200)  -- UNITS 0.1 percent
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The percentage of load is the ratio of each output  
+         current to the rated output current to the panel."
+    ::= {pdrPanelEntry 15}
+
+pdrPanelLoadC OBJECT-TYPE
+    SYNTAX INTEGER (0..200)  -- UNITS 0.1 percent
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The percentage of load is the ratio of each output  
+         current to the rated output current to the panel."
+    ::= {pdrPanelEntry 16}
+
+
+-- ====================================================================================
+--
+--  pdr                     OBJECT IDENTIFIER       ::= {cpqPower 4}  
+--  pdrBreaker              OBJECT IDENTIFIER       ::= { pdr 3 }
+--  Based on physical installed Breakers
+--  OID= .1.3.6.1.4.1.232.165.4.3
+
+pdrBreakerTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF PdrBreakerEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+           "List of breaker table entries.  The number of entries 
+            is given by pdrNumBreakers for this panel."
+    ::= { pdrBreaker 1 }
+
+pdrBreakerEntry OBJECT-TYPE
+    SYNTAX  PdrBreakerEntry 
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+           "An entry containing information applicable to a
+            particular output breaker of a particular panel."
+    INDEX   { pdrPanelIndex, pdrBreakerIndex }
+    ::= { pdrBreakerTable 1 }
+
+PdrBreakerEntry ::= SEQUENCE {
+    pdrBreakerIndex           	INTEGER,
+    pdrBreakerPanel	      	INTEGER,
+    pdrBreakerNumPosition      	INTEGER,
+    pdrBreakerNumPhases       	INTEGER,
+    pdrBreakerNumSequence      	INTEGER,
+    pdrBreakerRatedCurrent    	INTEGER,
+    pdrBreakerMonthlyKWH      	INTEGER,
+    pdrBreakerYearlyKWH       	INTEGER,
+    pdrBreakerTotalKWH        	INTEGER,
+    pdrBreakerCurrent         	INTEGER,
+    pdrBreakerCurrentPercent  	INTEGER,
+    pdrBreakerPower           	INTEGER,
+    pdrBreakerPercentWarning    INTEGER,
+    pdrBreakerPercentOverload   INTEGER
+    }
+
+pdrBreakerIndex OBJECT-TYPE
+    SYNTAX  INTEGER 	(0..200)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The index of breakers. 42 breakers in each panel,
+            arranged in odd and even columns"
+    ::= { pdrBreakerEntry 1 }
+
+pdrBreakerPanel OBJECT-TYPE
+    SYNTAX  INTEGER	
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The index of panel that these breakers are installed on."
+    ::= { pdrBreakerEntry 2 }
+
+pdrBreakerNumPosition OBJECT-TYPE
+    SYNTAX  INTEGER	
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The position of this breaker in the panel, 1-phase breaker
+	    or n-m breaker for 2-phase or n-m-k breaker for 3-phase."
+    ::= { pdrBreakerEntry 3 }
+
+pdrBreakerNumPhases OBJECT-TYPE
+    SYNTAX  INTEGER	
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The number of phase for this particular breaker."
+    ::= { pdrBreakerEntry 4 }
+
+pdrBreakerNumSequence OBJECT-TYPE
+    SYNTAX  INTEGER	
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The sequence of this breaker. i.e. 1 for single phase
+	    1,2 for 2-phase or 1,2,3 for 3-phase."
+    ::= { pdrBreakerEntry 5 }
+
+pdrBreakerRatedCurrent OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS 0.1 A
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The rated current in Amps for this particular breaker."
+    ::= { pdrBreakerEntry 6 }
+
+pdrBreakerMonthlyKWH OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The accumulated KWH for this breaker since the beginning of this 
+         calendar month or since the last reset."
+    ::= { pdrBreakerEntry 7 }
+
+pdrBreakerYearlyKWH OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The accumulated KWH for this breaker since the beginning of this 
+         calendar year or since the last reset."
+    ::= { pdrBreakerEntry 8 }
+
+pdrBreakerTotalKWH OBJECT-TYPE
+    SYNTAX  INTEGER (0..2147483647)  -- Units 0.01 KWH
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"The accumulated KWH for this breaker since it was put into service 
+         or since the last reset."
+    ::= { pdrBreakerEntry 9 }
+
+pdrBreakerCurrent OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS 0.1 A
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured output current for this breaker Current."
+    ::= { pdrBreakerEntry 10 }
+
+pdrBreakerCurrentPercent OBJECT-TYPE
+    SYNTAX INTEGER (0..200)  -- UNITS 0.1 Percent
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The ratio of output current over rated 
+         current for each breaker."
+    ::= { pdrBreakerEntry 11 }
+
+pdrBreakerPower OBJECT-TYPE
+    SYNTAX INTEGER   -- UNITS Watts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The power for this breaker in Watts."
+    ::= { pdrBreakerEntry 12 }
+
+pdrBreakerPercentWarning OBJECT-TYPE
+    SYNTAX  INTEGER (0..200)	-- UNITS 0.1 Percent
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The percentage of Warning set for this breaker."
+    ::= { pdrBreakerEntry 13 }
+
+pdrBreakerPercentOverload OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS 0.1 Percent
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The percentage of Overload set for this breaker."
+    ::= { pdrBreakerEntry 14 }
+
+-- ====================================================================================
+--                         modular smart PDU
+-- ====================================================================================
+--
+--  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}    
+--  mpduIdent                OBJECT IDENTIFIER       ::= { mpdu 1 }
+--  MPDU (or iPDU) identification group
+--  OID= .1.3.6.1.4.1.232.165.5.1
+
+mpduNumMPDU OBJECT-TYPE
+    SYNTAX INTEGER
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of Modular PDUs (Core) detected."
+    ::= { mpduIdent 1 }
+    
+mpduIdentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MpduIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Indexed by mpduNumMPDU. So aggregate objects for each entry equal to mpduNumMPDU 
+                 before go to the next entry. i.e if 4 MPDU detected, display 4 indexes, 4 
+                 Manufacturers, 4 Models..., start with 1."
+    ::= { mpduIdent 2 }
+
+mpduIdentEntry OBJECT-TYPE
+    SYNTAX MpduIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The table entry containing the identifications of each MPDU as well 
+                 as names of PDR panel, location of MPDU in a Data Center."
+    INDEX { mpduIdentIndex }
+    ::= { mpduIdentTable 1 }
+
+MpduIdentEntry ::= SEQUENCE {
+	mpduIdentIndex			INTEGER,
+	mpduManufacturer		DisplayString,
+	mpduModel			DisplayString,
+	mpduName			DisplayString,
+	mpduFirmwareVersion		DisplayString,
+	mpduHardwareVersion		DisplayString,
+	mpduPartNumber			DisplayString,
+	mpduSerialNumber		DisplayString,
+	mpduUUID			DisplayString,
+	mpduIP				DisplayString,
+	mpduMACAddress			DisplayString,
+	mpduControlStatus		DisplayString,
+	mpduRegion			DisplayString,
+	mpduType			DisplayString,
+	mpduPowerRating			DisplayString,
+	mpduInputRating			DisplayString,
+	mpduInputPlug			DisplayString,
+	mpduNumBreakers			INTEGER, 
+	mpduNumOutlet			INTEGER, 
+	mpduUHeight			INTEGER,
+	mpduRedundantStatus		DisplayString,
+	mpduNumSmartExtBar		INTEGER, 
+	mpduPanelName			DisplayString,
+	mpduPanelBreakerName		DisplayString,
+	mpduPanelBreakerRating		DisplayString,
+	mpduACFeedName			DisplayString,
+	mpduFloorName			DisplayString,
+	mpduRoomName			DisplayString,
+	mpduRow				DisplayString,
+	mpduRowPosition			DisplayString,
+	mpduRackName			DisplayString,
+        mpduRackHeight			DisplayString,
+        mpduRackID			DisplayString,
+	mpduUPosition			INTEGER,
+	mpduPairedPDUUUID		DisplayString,
+	mpduPairedPDUIP			DisplayString,
+	mpduInstalledLocation		INTEGER,
+      	mpduTotalPowerWatt		INTEGER,
+      	mpduTotalPowerVA  		INTEGER,
+      	mpduTotalPercentLoad    	INTEGER,
+        mpduRegionalNominalVoltage	DisplayString
+    }
+
+mpduIdentIndex OBJECT-TYPE
+    SYNTAX INTEGER (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the MpduIdentEntry table. Start with 1"
+    ::= { mpduIdentEntry 1 }
+
+mpduManufacturer OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           " The Core PDU manufacturer. StringLength=[21]"
+    ::= { mpduIdentEntry 2 }
+
+mpduModel OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU model, marketing name. StringLength=[40]."
+    ::= { mpduIdentEntry 3 }
+
+mpduName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU name, descriptive name or hostname. StringLength=[16]."
+    ::= { mpduIdentEntry 4 }
+
+mpduFirmwareVersion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU firmware version(s). StringLength=[12]."
+    ::= { mpduIdentEntry 5 }
+
+mpduHardwareVersion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The Core PDU hardware version. StringLength=[8]."
+    ::= { mpduIdentEntry 6 }
+
+mpduPartNumber OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU part number. StringLength=[21]."
+    ::= { mpduIdentEntry 7 }
+
+mpduSerialNumber OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU external serial number. StringLength=[21]."
+    ::= { mpduIdentEntry 8 }
+
+mpduUUID OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's UUID equals PN add SN then canonical conversion. StringLength=[37]."
+    ::= { mpduIdentEntry 9 }
+
+mpduIP OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's assigned IP. StringLength=[16]."
+    ::= { mpduIdentEntry 10 }
+
+mpduMACAddress OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU MAC address. StringLength=[18]."
+    ::= { mpduIdentEntry 11 }
+
+mpduControlStatus OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU Control Status: master or slave units.
+              StringLength=[31]."
+    ::= { mpduIdentEntry 12 }
+
+mpduRegion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Region: NA, Intl, Japan... StringLength=[7]."
+    ::= { mpduIdentEntry 13 }
+
+mpduType OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Type: Delta, Wye, single, Wye+lowline.
+            StringLength=[24]."
+    ::= { mpduIdentEntry 14 }
+
+mpduPowerRating OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Power Rating in KVA (Name Plate). Value is presented 
+            in 1/100 of the KVA. i.e. 1750 means 17.50 KVA"
+    ::= { mpduIdentEntry 15 }
+
+mpduInputRating OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Input Current Rating in A (Name Plate)"
+    ::= { mpduIdentEntry 16 }
+
+mpduInputPlug OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Input Plug: IEC60309 516P6,NEMA L15-30P...
+             StringLength=[16]."
+    ::= { mpduIdentEntry 17 }
+
+mpduNumBreakers OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The number of breakers used in each MPDU (6 by default)."
+    ::= { mpduIdentEntry 18 }
+
+mpduNumOutlet OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The number of outlets of each MPDU (6 by default)."
+    ::= { mpduIdentEntry 19 }
+
+mpduUHeight OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The MPDU U Height 1U or 2 U (1U by default)."
+    ::= { mpduIdentEntry 20 }
+
+mpduRedundantStatus OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Status of Core PDU in paired or not: Stand-alone or Redundant.
+             StringLength=[12]."
+    ::= { mpduIdentEntry 21 }
+
+mpduNumSmartExtBar OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "total number of  detected Smart Sticks connecting to each PDU."
+    ::= { mpduIdentEntry 22 }
+
+mpduPanelName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Name of Panel that was entered by customer in GUI.
+             StringLength=[50]."
+    ::= { mpduIdentEntry 23 }
+
+mpduPanelBreakerName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Name of breakers or Panel Position entered by customer in GUI.
+             StringLength=[50]."
+    ::= { mpduIdentEntry 24 }
+
+mpduPanelBreakerRating OBJECT-TYPE
+    SYNTAX	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "Breaker rating of the PDR Panel."
+    ::= { mpduIdentEntry 25 }
+
+mpduACFeedName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "it would be A, B, Red, or White...
+             StringLength=[50]."
+    ::= { mpduIdentEntry 26 }
+
+mpduFloorName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Name of building floor entered by customer in GUI.
+             StringLength=[50]."
+    ::= { mpduIdentEntry 27 }
+
+mpduRoomName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Name of the room entered by customer in GUI. StringLength=[50]."
+    ::= { mpduIdentEntry 28 }
+
+mpduRow OBJECT-TYPE
+    SYNTAX	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "Data Center Row entered by customer in GUI.
+             StringLength=[11]."
+    ::= { mpduIdentEntry 29 }
+
+mpduRowPosition OBJECT-TYPE
+    SYNTAX	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "Position in Row entered by customer in GUI. Null will be returned 
+            if not detected. StringLength=[11]."
+    ::= { mpduIdentEntry 30 }
+
+mpduRackName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Name of the Rack entered by customer in GUI. Null will be returned 
+            if not detected. StringLength=[50]."
+    ::= { mpduIdentEntry 31 }
+
+mpduRackHeight OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Rack Type (22U, 42U, 50U...). Null will be returned if not detected.
+             StringLength=[3]."
+    ::= { mpduIdentEntry 32 }
+
+mpduRackID OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "An unique ID to identify a rack, i.e. Rack SN. Null will be returned if 
+            not detected. StringLength=[50]."
+    ::= { mpduIdentEntry 33 }
+
+mpduUPosition OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "PDU Rack bottom U Start position, core U position. Null will be returned if not detected."
+    ::= { mpduIdentEntry 34 }
+
+mpduPairedPDUUUID OBJECT-TYPE
+    SYNTAX	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "UUID of the PDU paired with this one. Null will be returned if not detected.
+             StringLength=[50]."
+    ::= { mpduIdentEntry 35 }
+
+mpduPairedPDUIP OBJECT-TYPE
+    SYNTAX	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "IP address of the PDU paired with this one. Null will be returned if not detected.
+             StringLength=[16]."
+    ::= { mpduIdentEntry 36 }
+
+mpduInstalledLocation OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "0=Left 0U side area or rack frame, 1= Right 0U side area or rack frame, 2= front RETMA rail, 
+            3=back RETMA rail) - spatial location. A value of -1 will be returned if not detected."
+    ::= { mpduIdentEntry 37 }
+
+mpduTotalPowerWatt OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total power for the whole iPDU in Watts.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { mpduIdentEntry 38 }
+
+mpduTotalPowerVA OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units VA
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total power for the whole iPDU in VA.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { mpduIdentEntry 39 }
+
+mpduTotalPercentLoad OBJECT-TYPE
+    SYNTAX INTEGER   --UNITS 0.1 Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The whole iPDU's load in percent of rated capacity. Value is 
+         presented in 1/10 of the percentage i.e. 125 is 12.5%.  A value 
+         of -1 will be returned if the current is unable to be measured."
+    ::= { mpduIdentEntry 40 }
+
+mpduRegionalNominalVoltage OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "value is either America(208V), Japan(202V) or blank for International Model"
+    ::= { mpduIdentEntry 41 }
+
+-- ====================================================================================
+--
+--  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}      
+--  mpduOutput               OBJECT IDENTIFIER       ::= { mpdu 2 }
+--  MPDU (or iPDU) Output Measurements (6 Load Segments by default)
+--  OID= .1.3.6.1.4.1.232.165.5.2
+
+mpduOutputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MpduOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+           "Indexed by mpduNumOutlet. So aggregate objects for each entry equal to (mpduNumMPDU 
+            multiplies mpduNumOutlet) before go to the next entry. i.e if 4 MPDU detected, 
+            display 6x4 indexes, 6x4 OutputStatus, 6x4 OutputBreakerRating...start with 1."
+    ::= { mpduOutput 1 }
+
+mpduOutputEntry OBJECT-TYPE
+    SYNTAX MpduOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The output table entry containing the voltage, current, PF,
+            percent load, VA, Watts for the Modular PDU."
+ 
+    INDEX { mpduIdentIndex, mpduOutputIndex }
+    ::= { mpduOutputTable 1 }
+
+MpduOutputEntry ::= SEQUENCE {
+      mpduOutputIndex  			INTEGER,
+      mpduOutputStatus    		DisplayString,
+      mpduOutputBreakerRating  		INTEGER,
+      mpduOutputSmartDevice		DisplayString,
+      mpduOutputPercentLoad    		INTEGER,
+      mpduOutputVoltage    		INTEGER,
+      mpduOutputCurrent   		INTEGER,
+      mpduOutputPowerVA	    		INTEGER,
+      mpduOutputPowerWatt      		INTEGER,
+      mpduOutputPowerFactor    		INTEGER,
+      mpduOutputWarningThreshold    	INTEGER,
+      mpduOutputCriticalThreshold    	INTEGER,
+      mpduOutputPowerWattHour 		INTEGER
+    }
+
+mpduOutputIndex OBJECT-TYPE
+    SYNTAX INTEGER  (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the MpduOutputEntry table."
+    ::= { mpduOutputEntry 1 }
+
+mpduOutputStatus OBJECT-TYPE
+    SYNTAX  	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the device: off, on, problem. StringLength=[7]."
+    ::= { mpduOutputEntry 2 }
+
+mpduOutputBreakerRating OBJECT-TYPE
+    SYNTAX	INTEGER    --UNITS A
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The rating of each MPDU Output in Ampere."
+    ::= { mpduOutputEntry 3 }
+
+mpduOutputSmartDevice OBJECT-TYPE
+    SYNTAX	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "A smart cord device detected: False, True. StringLength=[5]."
+    ::= { mpduOutputEntry 4 }
+
+mpduOutputPercentLoad OBJECT-TYPE
+    SYNTAX INTEGER	 --UNITS 0.1 Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The MPDU's each output load in percent of rated capacity. Value is 
+         presented in 1/10 of the percentage i.e. 125 is 12.5%.  A value 
+         of -1 will be returned if the current is unable to be measured."
+    ::= { mpduOutputEntry 5 }
+
+mpduOutputVoltage OBJECT-TYPE
+    SYNTAX INTEGER    -- UNITS RMS 0.1 Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured output voltage from the PDU meters in volts. Value is 
+         presented in 1/10 of the Volt i.e. 2095 is 209.5 V.  A value 
+         of -1 will be returned if the voltage is unable to be measured."
+    ::= { mpduOutputEntry 6 }
+
+mpduOutputCurrent OBJECT-TYPE
+    SYNTAX INTEGER    -- UNITS RMS 0.01 Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured output current from the PDU meters in amps. Value is 
+         presented in 1/100 of the Ampere i.e. 175 is 1.75 A.  A value 
+         of -1 will be returned if the current is unable to be measured."
+    ::= { mpduOutputEntry 7 }
+
+mpduOutputPowerVA OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units VA
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total VA load (VI) measured on the PDU in VA.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { mpduOutputEntry 8 }
+
+mpduOutputPowerWatt OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total power load measured on the PDU in Watts.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { mpduOutputEntry 9 }
+
+mpduOutputPowerFactor OBJECT-TYPE
+    SYNTAX INTEGER    -- 0.01 UNITS
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The power factor is presented in 1/100 of the unit i.e.
+         98 is 0.98.  A value of -1 will be returned if the power factor is unable 
+         to be measured."
+    ::= { mpduOutputEntry 10 }
+
+mpduOutputWarningThreshold OBJECT-TYPE
+    SYNTAX INTEGER    -- Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Report the User-set threshhold limit for Warning in percentage"
+    ::= { mpduOutputEntry 11 }
+
+mpduOutputCriticalThreshold OBJECT-TYPE
+    SYNTAX INTEGER    -- Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Report the User-set threshhold limit for Critical in percentage"
+    ::= { mpduOutputEntry 12 }
+
+mpduOutputPowerWattHour OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watt-Hour (WH)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Support Billing Grade Energy Metering in Watt-Hour.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { mpduOutputEntry 13 }
+
+
+-- ====================================================================================
+--  
+--  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}    
+--  mpduDeviceIdent          OBJECT IDENTIFIER       ::= { mpdu 3 }
+--  ID of all Devices (power extension bars, servers) connected to MPDU Core's outlets
+--  Smart Devices are those blades/servers/storage encl with smart power cord
+--  OID= .1.3.6.1.4.1.232.165.5.3
+
+    
+mpduDeviceIdentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF MpduDeviceIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Indexed by mpduNumOutlet. So aggregate objects for each entry equal 
+                 to (mpduNumMPDU multiplies mpduNumOutlet) before go to the next entry. 
+                 i.e if 4 MPDU detected, display 6x4 indexes, 6x4 mpduDeviceStatus, 6x4 
+                 DeviceUIDStatus...start with 1."
+    ::= { mpduDeviceIdent 1 }
+
+mpduDeviceIdentEntry OBJECT-TYPE
+    SYNTAX MpduDeviceIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The ident table entry containing the name, model, 
+                 manufacturer, firmware version, part number... for
+                 each smart device, null value for unknown device."
+
+    INDEX { mpduIdentIndex, mpduDeviceIdentIndex }
+    ::= { mpduDeviceIdentTable 1 }
+
+MpduDeviceIdentEntry ::= SEQUENCE {
+      mpduDeviceIdentIndex         INTEGER,
+      mpduDeviceStatus             DisplayString,
+      mpduDeviceUIDStatus          DisplayString,
+      mpduDeviceNumOutlet          INTEGER,
+      mpduDeviceUHeight            INTEGER,
+      mpduDevicePowerRating        DisplayString,
+      mpduDeviceManufacturer       DisplayString,
+      mpduDeviceType		   DisplayString,
+      mpduDeviceModel              DisplayString,
+      mpduDeviceName               DisplayString,
+      mpduDeviceFirmwareVersion    DisplayString,
+      mpduDeviceHardwareVersion    DisplayString,
+      mpduDevicePartNumber         DisplayString,
+      mpduDeviceSerialNumber       DisplayString,
+      mpduDeviceUUID		   DisplayString,
+      mpduDeviceIP	           DisplayString,
+      mpduDeviceMAC	           DisplayString,
+      mpduDevicePSUSlotNo          INTEGER,
+      mpduDeviceUPosition          INTEGER,
+      mpduDeviceDetectionThreshold INTEGER
+     }
+
+mpduDeviceIdentIndex OBJECT-TYPE
+    SYNTAX INTEGER  (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index is based on the total number of Smart Extension Bars plus
+         smart devices (with smart power cord i.e. blades) detected."
+    ::= { mpduDeviceIdentEntry 1 }
+
+mpduDeviceStatus OBJECT-TYPE
+    SYNTAX  	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the device: off, on, problem. StringLength=[8]."
+    ::= { mpduDeviceIdentEntry 2 }
+
+mpduDeviceUIDStatus OBJECT-TYPE
+    SYNTAX  	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the device UID: off, on, blink. StringLength=[8]."
+    ::= { mpduDeviceIdentEntry 3 }
+
+mpduDeviceNumOutlet OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The number of outlets of detected the device.  This variable 
+            indicates the number of rows in the breakers table. Default is 5"
+    ::= { mpduDeviceIdentEntry 4 }
+
+mpduDeviceUHeight OBJECT-TYPE
+    SYNTAX	INTEGER		--UNITS 0.01
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The Unit height of ext bar or device. Some device supports non-integer. 
+            Present value x100, when read back, divided by 100 to get 2 decimal points."
+    ::= { mpduDeviceIdentEntry 5 }
+
+mpduDevicePowerRating OBJECT-TYPE
+    SYNTAX DisplayString 
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device's Power Rating in VA. Null will be returned if not detected.
+         StringLength=[8]."
+    ::= { mpduDeviceIdentEntry 6 }
+
+mpduDeviceManufacturer OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Manufacturer Name (e.g. Hewlett-Packard).
+	 Null will be returned if not detected. StringLength=[16]."
+    ::= { mpduDeviceIdentEntry 7 }
+
+mpduDeviceType OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device's Type: Ext Bar, server, or network device...
+          StringLength=[16]."
+    ::= { mpduDeviceIdentEntry 8 }
+
+mpduDeviceModel OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Model is Managed or Non-managed Ext Bar. 
+         Null will be returned if not detected. StringLength=[24]."
+    ::= { mpduDeviceIdentEntry 9 }
+
+mpduDeviceName OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The string identify the Device. i.e. 'BAR#1' (descriptive name)
+         Null will be returned if not detected. StringLength=[32]."
+    ::= { mpduDeviceIdentEntry 10 }
+
+mpduDeviceFirmwareVersion OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The firmware revision level of Sm Ext Bar. Null will be returned if 
+         not detected. StringLength=[8]."
+    ::= { mpduDeviceIdentEntry 11 }
+
+mpduDeviceHardwareVersion OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The hardware version of Sm Ext Bar. Null will be returned if not 
+         detected. StringLength=[8]."
+    ::= { mpduDeviceIdentEntry 12 }
+
+mpduDevicePartNumber OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device's part number. Null will be returned if not detected.
+          StringLength=[21]."
+    ::= { mpduDeviceIdentEntry 13 }
+
+mpduDeviceSerialNumber OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device's serial number. Null will be returned if not detected.
+          StringLength=[21]."
+    ::= { mpduDeviceIdentEntry 14 }
+
+mpduDeviceUUID OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device's UUID. Null will be returned if not detected.
+          StringLength=[37]."
+    ::= { mpduDeviceIdentEntry 15 }
+
+mpduDeviceIP OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device's IP Address. Null will be returned if not detected.
+          StringLength=[16]."
+    ::= { mpduDeviceIdentEntry 16 }
+
+mpduDeviceMAC OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device mgmt processor MAC Address. Null will be returned if 
+         not detected. StringLength=[18]."
+    ::= { mpduDeviceIdentEntry 17 }
+
+mpduDevicePSUSlotNo OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "Device power supply logical slot number."
+    ::= { mpduDeviceIdentEntry 18 }
+
+mpduDeviceUPosition OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "Device U start position."
+    ::= { mpduDeviceIdentEntry 19 }
+
+mpduDeviceDetectionThreshold OBJECT-TYPE
+    SYNTAX	INTEGER   -- UNITS .001 Amp
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "Read device detection threshold between 10 and 50mA."
+    ::= { mpduDeviceIdentEntry 20 }
+
+
+-- ====================================================================================
+--
+--  mpdu                     OBJECT IDENTIFIER       ::= {cpqPower 5}    
+--  mpduSmExtBarOutlet       OBJECT IDENTIFIER       ::= { mpdu 4 }
+--  Outputs measurements for each Smart Extension Bar's Outlet and
+--  Identification of Smart Device connected to Smart Extension Bar.
+--  OID= .1.3.6.1.4.1.232.165.5.4
+
+
+mpduSmExtBarOutletTable OBJECT-TYPE
+    SYNTAX  SEQUENCE OF MpduSmExtBarOutletEntry
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+           "Indexed by mpduDeviceNumOutlet. So aggregate objects for each entry equal to 
+            (mpduNumMPDU multiplies mpduNumOutlet multiplies mpduDeviceNumOutlet) before 
+            go to the next entry. i.e if 4 MPDU detected, display 5x6x4 indexes, 5x6x4
+            mpduSmExtBarOutletStatus, 5x6x4 mpduSmExtBarOutletUIDStatus...start with 1."
+    ::= { mpduSmExtBarOutlet 1 }
+
+mpduSmExtBarOutletEntry OBJECT-TYPE
+    SYNTAX  MpduSmExtBarOutletEntry 
+    ACCESS  not-accessible
+    STATUS  mandatory
+    DESCRIPTION
+           "Entries contain status, measurements for each outlet (no PowerVA)
+            Display null if it can't be measured or no device detected."
+    INDEX   { mpduIdentIndex, mpduOutputIndex, mpduSmExtBarOutletIndex }
+    ::= { mpduSmExtBarOutletTable 1 }
+
+MpduSmExtBarOutletEntry ::= SEQUENCE {
+	mpduSmExtBarOutletIndex       		  INTEGER,
+      	mpduSmExtBarOutletStatus      		  DisplayString,
+      	mpduSmExtBarOutletUIDStatus      	  DisplayString,
+      	mpduSmExtBarOutletRating   		  INTEGER,
+      	mpduSmExtBarOutletVoltage     		  INTEGER,
+      	mpduSmExtBarOutletCurrent     		  INTEGER,
+      	mpduSmExtBarOutletPowerWatt     	  INTEGER,
+      	mpduSmExtBarOutletPowerFactor   	  INTEGER,
+      	mpduSmExtBarOutletDeviceName      	  DisplayString,    
+      	mpduSmExtBarOutletDeviceUUID      	  DisplayString,
+      	mpduSmExtBarOutletDeviceProduct   	  DisplayString,
+      	mpduSmExtBarOutletDeviceIP		  DisplayString,
+      	mpduSmExtBarOutletAutoDiscovered  	  INTEGER,
+      	mpduSmExtBarOutletDeviceMAC		  DisplayString,    
+      	mpduSmExtBarOutletDeviceSN        	  DisplayString,    
+      	mpduSmExtBarOutletDevicePSSlotNo  	  INTEGER,
+      	mpduSmExtBarOutletDeviceUPosition	  INTEGER,
+      	mpduSmExtBarOutletDeviceUHeight		  INTEGER,
+      	mpduSmExtBarOutletDeviceInstalledLocation INTEGER,
+        mpduSmExtBarOutletPowerWattHour     	  INTEGER
+    }
+
+mpduSmExtBarOutletIndex OBJECT-TYPE
+    SYNTAX  INTEGER  (0..100)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Index of Smart Extension Bar."
+    ::= { mpduSmExtBarOutletEntry 1 }
+
+mpduSmExtBarOutletStatus OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The overall status of the Smart Extension Bar's outlet: off, on, problem...
+             StringLength=[3]."
+    ::= { mpduSmExtBarOutletEntry 2 }
+
+mpduSmExtBarOutletUIDStatus OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The overall status of the Smart Extension Bar's UID: off, on, blink...
+             StringLength=[8]."
+    ::= { mpduSmExtBarOutletEntry 3 }
+
+mpduSmExtBarOutletRating OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS A
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Sm Ext Bar Outlet's Rating in Amp.  A value of -1 will be returned 
+            if the stick is unable to detect. StringLength=[8]."
+    ::= { mpduSmExtBarOutletEntry 4 }
+
+mpduSmExtBarOutletVoltage OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS 0.1 Volts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The SM Ext Bar voltage in volts. Value is presented 1/10 of the Volt 
+            i.e. 2098 means 209.8 V.  A value of -1 will be returned if the voltage is unable 
+            to be measured."
+    ::= { mpduSmExtBarOutletEntry 5 }
+
+mpduSmExtBarOutletCurrent OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS 0.01 Amps
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The SM Ext Bar current draw in Amps. Value is presented in 1/100 of the Ampere
+          i.e. 127 means 1.27 A.  A value of -1 will be returned if the current is unable 
+           to be measured."
+    ::= { mpduSmExtBarOutletEntry 6 }
+
+mpduSmExtBarOutletPowerWatt OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS Watts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Sm Ext Bar's Power measured in Watts. A value of -1 will be returned if the 
+            power is unable to be measured."
+    ::= { mpduSmExtBarOutletEntry 7 }
+
+mpduSmExtBarOutletPowerFactor OBJECT-TYPE
+    SYNTAX  INTEGER    -- 0.01 UNITS
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The outlet's power factor in 0.01 unit. It is presented in 1/100 of the unit. 
+          i.e. 98 means 0.98.  A value of -1 will be returned if the voltage is unable 
+            to be measured."
+    ::= { mpduSmExtBarOutletEntry 8 }
+
+mpduSmExtBarOutletDeviceName OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) Name that connects to this 
+         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[50]."
+    ::= { mpduSmExtBarOutletEntry 9 }
+
+mpduSmExtBarOutletDeviceUUID OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) UUID that connects to this 
+         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[37]."
+    ::= { mpduSmExtBarOutletEntry 10 }
+
+mpduSmExtBarOutletDeviceProduct OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) Model that connects to this 
+         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[40]."
+    ::= { mpduSmExtBarOutletEntry 11 }
+
+mpduSmExtBarOutletDeviceIP OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) IP of iLO that connects to this 
+         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[16]."
+    ::= { mpduSmExtBarOutletEntry 12 }
+
+mpduSmExtBarOutletAutoDiscovered OBJECT-TYPE
+    SYNTAX  INTEGER    
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Boolean values of 0 or 1. 1 means this Sm Ext Bar Outlet is able to get information 
+            from a blade with smart power supply (auto discovery is enabled)..."
+    ::= { mpduSmExtBarOutletEntry 13 }
+
+mpduSmExtBarOutletDeviceMAC OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) MAC address that connects to this 
+         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[18]."
+    ::= { mpduSmExtBarOutletEntry 14 }
+
+mpduSmExtBarOutletDeviceSN OBJECT-TYPE
+    SYNTAX DisplayString  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) Serial Number that connects to this 
+         Sm Ext Bar Outlet. Null will be returned if not detected. StringLength=[21]."
+    ::= { mpduSmExtBarOutletEntry 15 }
+
+mpduSmExtBarOutletDevicePSSlotNo OBJECT-TYPE
+    SYNTAX INTEGER  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device (Blade/Server/Storage) Power Supply' Slot Number that connects to this 
+         Sm Ext Bar Outlet. A value of -1 will be returned if not detected."
+    ::= { mpduSmExtBarOutletEntry 16 }
+
+
+mpduSmExtBarOutletDeviceUPosition OBJECT-TYPE
+    SYNTAX  INTEGER   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Device U start position. A value of -1 will be returned if not detected."
+    ::= { mpduSmExtBarOutletEntry 17 }
+
+mpduSmExtBarOutletDeviceUHeight OBJECT-TYPE
+    SYNTAX  INTEGER  	--UNITS 0.01
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Device U height. Enter -1 if not detected. Some device supports non-integer. 
+            Present value x100, when read back, divided by 100 to get 2 decimal points."
+    ::= { mpduSmExtBarOutletEntry 18 }
+
+mpduSmExtBarOutletDeviceInstalledLocation OBJECT-TYPE
+    SYNTAX	INTEGER
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "0=Left 0U side area or rack frame, 1= Right 0U side area or rack frame, 2= front RETMA rail, 
+            3=back RETMA rail) - spatial location. A value of -1 will be returned if not detected."
+    ::= { mpduSmExtBarOutletEntry 19 }
+
+mpduSmExtBarOutletPowerWattHour OBJECT-TYPE
+    SYNTAX  INTEGER	-- UNITS Watt-Hour (WH)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Sm Ext Bar's Power measured in Watt-Hour support Billing Grade Energy Metering. 
+            A value of -1 will be returned if the power is unable to be measured."
+    ::= { mpduSmExtBarOutletEntry 20 }
+
+
+
+-- ====================================================================================
+--				OFFLINE UPS
+-- ====================================================================================
+--
+-- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
+-- oupsIdent                OBJECT IDENTIFIER       ::= { oups 1 }
+-- Offline UPS - UPS Identification
+-- OID= .1.3.6.1.4.1.232.165.6.1
+
+oupsIdentManufacturer OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..31))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The UPS Manufacturer Name (e.g. Hewlett-Packard)."
+    ::= { oupsIdent 1 }
+
+oupsIdentModel OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The UPS Model such as R-1500 G3."
+    ::= { oupsIdent 2 }
+
+oupsIdentSystemFWVersion OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Display System firmware version."
+    ::= { oupsIdent 3 }
+
+oupsIdentPowerModuleFWVersion OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Display Power Module firmware version."
+    ::= { oupsIdent 4 }
+
+oupsIdentOemCode OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"A binary code indicating vendor. This should be a ?0x0c? for HP"
+    ::= { oupsIdent 5 }
+
+oupsIdentSerialNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))  
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Get the UPS Serial Number (i.e. B00123456W)."
+    ::= { oupsIdent 6 }
+
+oupsIdentPartNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Get the UPS Part Number (i.e. 204451-B21)."
+    ::= { oupsIdent 7 }
+
+
+-- ====================================================================================
+--
+-- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
+-- oupsBattery              OBJECT IDENTIFIER       ::= { oups 2 }
+-- Offline UPS - Battery Parameters
+-- OID= .1.3.6.1.4.1.232.165.6.2
+
+oupsBatTimeRemaining OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS seconds
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery run time in seconds before UPS turns off due
+	 to low battery."
+    ::= { oupsBattery 1 }
+
+oupsBatVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Volts DC
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Read the Total Battery voltage."
+    ::= { oupsBattery 2 }
+
+oupsBatCapacity OBJECT-TYPE
+    SYNTAX INTEGER (0..100)    -- UNITS percent
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery percent charge."
+    ::= { oupsBattery 3 }
+
+oupsBatAbmStatus OBJECT-TYPE
+    SYNTAX  INTEGER {
+      batteryCharging(1),	--(include Battery Boosting and Battery Floating)
+      batteryDischarging(2),
+      batteryResting(3),
+      batteryTesting(4),
+      notAvailable(5)		--(ACC mode, no BP connected)
+	}
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	"Gives the status of the Advanced Battery Management; example:
+	 batteryResting(3) is the state when the battery is fully charged and none of 
+         the other actions (charging/discharging/floating) is being done."
+    ::= { oupsBattery 4 }
+
+oupsBatTestStatus OBJECT-TYPE
+    SYNTAX INTEGER {
+       unknown(1),     
+       passed(2),
+       failed(3),
+       inProgress(4),
+       notSupported(5),
+       inhibited(6)
+          }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Battery Test Status. UPS will support schedule testing only
+         7, 14, 30, or 60 days. Default is 14 days."
+    ::= { oupsBattery 5 }
+
+oupsBatLatestTestDate OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Get time and date of the latest battery test."
+    ::= { oupsBattery  6 }
+
+oupsBatReplacementDateBP1 OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Get the battery replacement date of BP1."
+    ::= { oupsBattery  7 }
+
+oupsBatReplacementDateBP2 OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Get the battery replacement date of BP2."
+    ::= { oupsBattery  8 }
+
+oupsBatToACDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..150)    -- UNITS ms
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Get delay time switching from Battery mode to AC mode in ms.
+        Default is 0ms, unit is increased per 100ms"
+    ::= { oupsBattery  9 }
+
+oupsBatChargeDelay OBJECT-TYPE
+    SYNTAX INTEGER (0..9999)    -- UNITS seconds
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Get battery charge delay in second. Default is 0 (random)
+        unit is increased per 10sec."
+    ::= { oupsBattery  10 }
+
+oupsBatNumModules OBJECT-TYPE
+    SYNTAX INTEGER (0..2)   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Number of battery modules detected by power unit."
+    ::= { oupsBattery  11 }
+
+oupsBatModel OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Report 1U, 2U, or 3U Battery Pack, both BPs must be the same model."
+    ::= { oupsBattery  12 }
+
+oupsBatChargingPowerLevelUtility OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "3 charging power levels: 1100W, 555W, 190W."
+    ::= { oupsBattery  13 }
+
+oupsBatChargingPowerLevelGenerator OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "4 charging power levels: 1100W, 555W, 190W, No Charge."
+    ::= { oupsBattery  14 }
+
+oupsBatSharedConfig OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "expect 3 values for shared BP configuration: PU single, PU master, PU slave."
+    ::= { oupsBattery  15 }
+
+oupsBatPackFWVerBP1 OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Display Battery Pack 1 FW version."
+    ::= { oupsBattery  16 }
+
+oupsBatPackFWVerBP2 OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Display Battery Pack 2 FW version."
+    ::= { oupsBattery  17 }
+
+
+-- ====================================================================================
+--
+-- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
+-- oupsInput                OBJECT IDENTIFIER       ::= { oups 3 }
+-- Offline UPS - Input Parameters
+-- OID= .1.3.6.1.4.1.232.165.6.3
+
+
+oupsInputFrequency OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The utility line frequency in tenths of Hz."
+    ::= { oupsInput 1 }
+
+oupsInputLineBads OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of times the Input was out of tolerance
+	in voltage or frequency."
+    ::= { oupsInput 2 }
+
+oupsInputNumPhases OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    ::= { oupsInput 3 }
+
+oupsInputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF OupsInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to
+	         NumPhases and including the UpsInput group."
+    ::= { oupsInput 4 }
+
+oupsInputEntry OBJECT-TYPE
+    SYNTAX OupsInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The input table entry containing the current, voltage, etc."
+    INDEX { oupsInputPhase }
+    ::= { oupsInputTable 1 }
+
+OupsInputEntry ::= SEQUENCE {
+    oupsInputPhase        INTEGER,
+    oupsInputVoltage      INTEGER,
+    oupsInputCurrent      INTEGER,
+    oupsInputWatts        INTEGER
+    }
+
+oupsInputPhase OBJECT-TYPE
+    SYNTAX INTEGER  (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of the phase. Serves as index for input table."
+    ::= { oupsInputEntry 1 }
+
+oupsInputVoltage OBJECT-TYPE
+    SYNTAX INTEGER  (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input voltage from the UPS meters in volts."
+    ::= { oupsInputEntry 2 }
+
+oupsInputCurrent OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input current from the UPS meters in amps."
+    ::= { oupsInputEntry 3 }
+
+oupsInputWatts OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured input power in watts."
+    ::= { oupsInputEntry 4 }
+
+-- ===== end of table ====
+
+oupsInputPowerFactor OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- 0.01 UNITS
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured real Input power factor with 2 decimals."
+    ::= { oupsInput 5 }
+
+oupsInputDBType OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	 "Read the input Distribution Box type: 1- 480V-Y (US-5W NEMA plugs),
+          2- 480V-V (US-5W IEC plugs), 3- 415V-Y (EURO-5W IEC plugs),
+          4- 415V-Y (US/INTL-5W IEC plugs), 5- 380V-Y (China-5W hardwired)."
+    ::= { oupsInput 6 }
+
+oupsInputUpperVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..999)  -- UNITS in V
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Read the upper voltage range, 5 to 10 percent above the nominal voltage.
+         Factory default is 10 percent."
+    ::= { oupsInput 7 }
+
+oupsInputLowerVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..999)  -- UNITS in V
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Read the lower voltage range, 5 to 15 percent below the nominal voltage.
+         Factory default is -15 percent."
+    ::= { oupsInput 8 }
+
+oupsGeneratorDetection OBJECT-TYPE
+    SYNTAX INTEGER { 
+    onGenerator(1),    -- ATS sets 1 to tell generator is switched on
+    offGenerator(2),   -- ATS sets 2 to tell generator is switched off
+    noAction(3)        -- set 3 for no action (default)
+    }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"ATS sets a value of 1 to signal UPS that a generator is started so the UPS will  
+         charge Battery Pack using a different setting while it's on generator (intent to 
+         save all power to back up for the load)."
+    ::= { oupsInput 9 }
+
+oupsInputWithGenerator OBJECT-TYPE
+    SYNTAX INTEGER {
+    woGenerator(1), 		-- Input Source is on Utility only (know for sure no Gen)
+    withGenerator(2)		-- Input Source could be from Utility or Generator
+    }
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"A value of 1 when user known for sure Input has no Generator backup; a value
+         of 2 tells Input Source could be from either Utility or Generator."
+    ::= { oupsInput 10 }
+
+
+-- ====================================================================================
+--
+-- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
+-- oupsOutput               OBJECT IDENTIFIER       ::= { oups 4 }
+-- Offline UPS Output Parameters
+-- OID= .1.3.6.1.4.1.232.165.6.4
+
+oupsOutputLoad OBJECT-TYPE
+    SYNTAX INTEGER (0..200)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The total UPS output load in percentage of rated capacity."
+    ::= { oupsOutput 1 }
+
+oupsOutputFrequency OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS 0.1 Hertz
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured UPS output frequency in tenths of Hz."
+    ::= { oupsOutput 2 }
+
+oupsOutputNumPhases OBJECT-TYPE
+    SYNTAX INTEGER  (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of metered output phases, serves as the table index."
+    ::= { oupsOutput 3 }
+
+oupsOutputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF OupsOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+	"The Aggregate Object with number of entries equal to NumPhases
+	and including the UpsOutput group."
+    ::= { oupsOutput 4 }
+
+oupsOutputEntry OBJECT-TYPE
+    SYNTAX OupsOutputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+	"Output Table Entry containing voltage, current, etc."
+    INDEX { oupsOutputPhase }
+    ::= { oupsOutputTable 1 }
+
+OupsOutputEntry ::= SEQUENCE {
+    oupsOutputPhase       	INTEGER,
+    oupsOutputVoltage     	INTEGER,
+    oupsOutputCurrent     	INTEGER,
+    oupsOutputWatts       	INTEGER,
+    oupsOutputLoadPerPhase	INTEGER
+    }
+
+oupsOutputPhase OBJECT-TYPE
+    SYNTAX INTEGER (0..6)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number {1..3} of the output phase."
+    ::= { oupsOutputEntry 1 }
+
+oupsOutputVoltage OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured output voltage from the UPS metering in volts."
+    ::= { oupsOutputEntry 2 }
+
+oupsOutputCurrent OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS RMS Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured UPS output current in amps."
+    ::= { oupsOutputEntry 3 }
+
+oupsOutputWatts OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- UNITS Watts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured real output power in watts."
+    ::= { oupsOutputEntry 4 }
+
+oupsOutputLoadPerPhase OBJECT-TYPE
+    SYNTAX INTEGER (0..200)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The UPS output load per phase in percentage of rated capacity."
+    ::= { oupsOutputEntry 5 }
+
+-- ===== end of table ====
+
+oupsOutputPowerFactor OBJECT-TYPE
+    SYNTAX INTEGER (0..2147483647)  -- 0.01 UNITS
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured real output power factor with 2 decimals."
+    ::= { oupsOutput 5 }
+
+oupsOutputSource OBJECT-TYPE
+    SYNTAX  INTEGER {
+    acSource(1),           	-- Either from Utility or Generator
+    battery(2)                	-- Power comes from Battery Source
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+	   "Indicate the source that UPS operating from when providing output."
+    ::= { oupsOutput 6 }
+
+
+-- ====================================================================================
+--
+-- oups                     OBJECT IDENTIFIER       ::= {cpqPower 6}  
+-- oupsMonitor              OBJECT IDENTIFIER       ::= { oups 5 }
+-- Offline UPS Control Parameters
+-- OID= .1.3.6.1.4.1.232.165.6.5
+
+oupsMonitorAmbientTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS in F
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the internal PU Ambient temperature."
+    ::= { oupsMonitor  1 }
+
+oupsMonitorBypassSCRTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS in F
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the internal PU Bypass SCR temperature."
+    ::= { oupsMonitor  2 }
+
+oupsMonitorDDTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS in F
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the internal PU DD temperature."
+    ::= { oupsMonitor  3 }
+
+oupsMonitorInverterTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS in F
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the internal PU DD temperature."
+    ::= { oupsMonitor  4 }
+
+oupsMonitorChargerTemp OBJECT-TYPE
+    SYNTAX  INTEGER (-100..200)   -- UNITS in F
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the internal PU Charger temperature."
+    ::= { oupsMonitor  5 }
+
+oupsMonitorBP1Temp OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..63))   -- UNITS in F
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Display Battery Pack 1 Temeprature in F. If BP1 not connected the PU will
+        return 255 and displayed as -not connect-"
+    ::= { oupsMonitor  6 }
+
+oupsMonitorBP2Temp OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..63))   -- UNITS in F  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Display Battery Pack 2 Temperature in F. If BP2 not connected the PU will
+        return 255 and displayed as -not connect-"
+    ::= { oupsMonitor  7 }
+
+oupsMonitorRestartDelay OBJECT-TYPE
+    SYNTAX  INTEGER (1..150)  -- UNITS in ms
+    ACCESS  read-only     --the last 2 digit SN is the default ms delay
+    STATUS  mandatory
+    DESCRIPTION
+       "The reading of the AC Turn On Delay (Restart Delay). The value can be
+        changed via front LCD Menu or inserted Module GUI. Default is 0ms, unit is 
+        increased per 100ms."
+    ::= { oupsMonitor  8 }
+
+oupsMonitorACCLoadLevel OBJECT-TYPE
+    SYNTAX  DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Read the set load level that ACC would be active from 0 to this percentage. 
+        Default is 20 percent. Select 0 to set it as Always On"
+    ::= { oupsMonitor  9 }
+
+oupsMonitorOperatingMode OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Check if UPS is normal op, or on bypass, on inverter or ACC Active, "
+    ::= { oupsMonitor  10 }
+
+oupsMonitorOperationType OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+       "Check if UPS is operating as an UPS or ACC (PU only, no BP)."
+    ::= { oupsMonitor  11 }
+
+oupsTestTrap OBJECT-TYPE
+    SYNTAX INTEGER { startTestTrap (1) }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"Setting startTestTrap to 1 will initiate a TrapTest
+	 is sent out from Management Module.  All other set values are invalid."
+    ::= { oupsMonitor 12 }
+
+oupsOnGenDuration OBJECT-TYPE
+    SYNTAX INTEGER {
+                   for30Min (1),
+                   for1Hr (2),
+		   for2Hr (3),			
+                   for4Hr (4)
+                   }
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"When read, show the current On-Generator Duration set by user on UPS LCD or GUI ."
+    ::= { oupsMonitor 13 }
+
+oupsRuntimeLimitation OBJECT-TYPE
+    SYNTAX INTEGER {
+                   disable (1),
+                   enable (2)
+                   }
+
+    ACCESS read-write
+    STATUS mandatory
+    DESCRIPTION
+	"show the current setting for Runtime Limitation. When enable, it can last for 70sec or 3min."
+    ::= { oupsMonitor 14 }
+
+
+-- ====================================================================================
+--
+--  oups                    OBJECT IDENTIFIER       ::= {cpqPower 6}  
+--  oupsRackDiscovery	    OBJECT IDENTIFIER       ::= { ups 6 }
+--  Offline UPS Rack Discovery. Location of the PU and BP installed in a rack
+--  1-wire contact reading the U-Height and U-Position of each enclosure
+--  OID= .1.3.6.1.4.1.232.165.6.6
+
+
+oupsRackTagVersion OBJECT-TYPE
+	SYNTAX INTEGER (0..10)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the 1-wire contact FW version from EEPROM's Tag Version. Initial tag is 01"
+	::= { oupsRackDiscovery 1 }
+
+oupsRackID OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..63))
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get 10-digit Serial Number from the Location Discovery Strip mount in the front of the rack"
+	::= { oupsRackDiscovery 2 }
+
+oupsRackPartNumber OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..63))
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get 10 or 12-digit Part Number xxxxxx-001 from the Location Discovery Strip mount in the front of the rack"
+	::= { oupsRackDiscovery 3 }
+
+oupsRackProductDescription OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..63))
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get spatial data of rack: description of the Rack Name."
+	::= { oupsRackDiscovery 4 }
+
+oupsRackEncULocation OBJECT-TYPE
+	SYNTAX DisplayString (SIZE (0..63))
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Tell where the Location Discovery Strip is mounted in the rack. B for Back, F for Front, L for Left 
+         and R for Right."
+	::= { oupsRackDiscovery 5 }
+
+oupsRackUHeight OBJECT-TYPE
+	SYNTAX INTEGER (0..50)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get spatial data of rack: U-height of the rack can be 36U, 42U, or 47U model."
+	::= { oupsRackDiscovery 6 }
+
+oupsRackPUUPosition OBJECT-TYPE
+	SYNTAX INTEGER (0..50)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the U-position of the PU where it is installed in the rack. The U position range is from 1-50."
+	::= { oupsRackDiscovery 7 }
+
+oupsRackPUUHeight OBJECT-TYPE
+	SYNTAX INTEGER (0..10)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the U-Height of the Power Unit. PU height is either 1U or 2U."
+	::= { oupsRackDiscovery 8 }
+
+oupsRackBP1UPosition OBJECT-TYPE
+	SYNTAX INTEGER (0..50)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the U-Position of the Battery Pack 1, installed right below the PU.
+         Range is from 1 to 50."
+	::= { oupsRackDiscovery 9 }
+
+oupsRackBP1UHeight OBJECT-TYPE
+	SYNTAX INTEGER (0..10)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the U-Height of the BP 1. BP is either 1U, 2U, and 3U"
+	::= { oupsRackDiscovery 10 }
+
+oupsRackBP2UPosition OBJECT-TYPE
+	SYNTAX INTEGER (0..50)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the U-Position of the Battery Pack 2, installed right below the BP1.
+         Range is from 1 to 50."
+	::= { oupsRackDiscovery 11 }
+
+oupsRackBP2UHeight OBJECT-TYPE
+	SYNTAX INTEGER (0..10)
+	ACCESS read-only
+	STATUS mandatory
+    	DESCRIPTION
+	"Get the U-Height of the BP 2. BP is either 1U, 2U, and 3U"
+	::= { oupsRackDiscovery 12 }
+
+
+-- ====================================================================================
+--             PDU2 GLANDORE - Group (breaker) monitored (no outlet monitored)
+--             PDU2 DRAGONWOOD1 (GLANDORE2) - Group (breaker) and Outlet monitored
+-- ====================================================================================
+--  
+--  pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
+--  pdu2Ident                OBJECT IDENTIFIER       ::= { pdu2 1 }
+--  PDU identification group
+--  OID= .1.3.6.1.4.1.232.165.7.1
+
+pdu2NumberPDU OBJECT-TYPE
+    SYNTAX INTEGER (1..2)	-- pdu(0) master or pdu(1) slave1...
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of PDUs detected (in its daisy chain)."
+    ::= { pdu2Ident 1 }
+    
+pdu2IdentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu2IdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to pdu2NumberPDU ."
+    ::= { pdu2Ident 2 }
+
+pdu2IdentEntry OBJECT-TYPE
+    SYNTAX Pdu2IdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The ident table entry containing the name, model, manufacturer, 
+                 firmware version, part number, etc."
+    INDEX { pdu2IdentIndex }
+    ::= { pdu2IdentTable 1 }
+
+Pdu2IdentEntry ::= SEQUENCE {
+      	pdu2IdentIndex         	INTEGER,
+      	pdu2Name               	DisplayString,
+      	pdu2Model              	DisplayString,
+      	pdu2Manufacturer       	DisplayString,
+      	pdu2FirmwareVersion    	DisplayString,
+      	pdu2PartNumber         	DisplayString,
+      	pdu2SerialNumber       	DisplayString,
+      	pdu2Status             	INTEGER,
+      	pdu2Controllable       	INTEGER,
+      	pdu2InputPhaseCount	INTEGER,
+	pdu2GroupCount		INTEGER,
+        pdu2OutletCount	 	INTEGER    
+    }
+
+pdu2IdentIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the Pdu2IdentEntry table."
+    ::= { pdu2IdentEntry 1 }
+
+pdu2Name OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The string identify the device in daisy chain. Example PDU A."
+    ::= { pdu2IdentEntry 2 }
+
+pdu2Model OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Model."
+    ::= { pdu2IdentEntry 3 }
+
+pdu2Manufacturer OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
+    ::= { pdu2IdentEntry 4 }
+
+pdu2FirmwareVersion OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The firmware revision level of the device."
+    ::= { pdu2IdentEntry 5 }
+
+pdu2PartNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device part number. Example AF400A."
+    ::= { pdu2IdentEntry 6 }
+
+pdu2SerialNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device serial number, 10- or 16-digit."
+    ::= { pdu2IdentEntry 7 }
+
+pdu2Status OBJECT-TYPE
+    SYNTAX  INTEGER
+    {
+      other(1),    -- default
+      ok(2),
+      degraded(3),
+      failed(4)
+    }
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the device.  A value of OK(2) indicates the device is operating normally.
+    A value of degraded(3) indicates the device is operating with warning indicators.  A value of
+    failed(4) indicates the device is operating with critical indicators."
+    ::= { pdu2IdentEntry 8 }
+
+pdu2Controllable OBJECT-TYPE
+    SYNTAX  INTEGER 
+    {
+      yes(1),
+      no(2)
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "This object indicates whether or not the device is controllable."
+    ::= { pdu2IdentEntry 9 }
+
+pdu2InputPhaseCount  OBJECT-TYPE
+    SYNTAX     INTEGER (0..63)
+    ACCESS     read-only
+    STATUS     mandatory
+    DESCRIPTION 
+     	"The number of input phase on this pdu 1,2,3."
+    ::= { pdu2IdentEntry 10 }
+
+pdu2GroupCount  OBJECT-TYPE
+    SYNTAX     INTEGER (0..63)
+    ACCESS     read-only
+    STATUS     mandatory
+    DESCRIPTION 
+	"The number of groups (breakers) on this pdu."
+    ::= { pdu2IdentEntry 11 }
+
+pdu2OutletCount  OBJECT-TYPE
+    SYNTAX     INTEGER (0..63)
+    ACCESS     read-only
+    STATUS     mandatory
+    DESCRIPTION 
+	"The number of outlets in this PDU."
+         ::= { pdu2IdentEntry 12 }
+
+
+-- ====================================================================================
+--
+--  pdu2                    OBJECT IDENTIFIER       ::= {cpqPower 7}    
+--  pdu2Input               OBJECT IDENTIFIER       ::= { pdu2 2 }
+--  PDU2 input group
+--  OID= .1.3.6.1.4.1.232.165.7.2
+
+pdu2InputTable  OBJECT-TYPE
+	SYNTAX SEQUENCE OF Pdu2InputEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"Aggregate Object with number of entries equal to pdu2NumberPDU ."
+	::= { pdu2Input 1 }
+
+pdu2InputEntry  OBJECT-TYPE
+	SYNTAX 	Pdu2InputEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"The ident table entry containing the VA, Watts, WH, etc."
+	INDEX { pdu2IdentIndex }
+	::= { pdu2InputTable 1 }
+
+Pdu2InputEntry ::= SEQUENCE {
+	pdu2InputType			INTEGER,
+	pdu2InputFrequency		INTEGER,
+	pdu2InputFrequencyStatus	INTEGER,
+	pdu2InputPowerVA		INTEGER,
+	pdu2InputPowerWatts		INTEGER,
+	pdu2InputPowerWattHour		INTEGER,
+	pdu2InputPowerWattHourTimer	DisplayString,
+	pdu2InputPowerFactor		INTEGER,
+	pdu2InputPowerVAR		INTEGER
+}
+
+pdu2InputType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		splitPhase (2),
+		threePhaseDelta (3),
+		threePhaseWye (4)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Type of input - single phase, split phase, three phase delta, or three
+				phase wye."
+	::= { pdu2InputEntry 1 }
+
+pdu2InputFrequency  OBJECT-TYPE
+	SYNTAX     INTEGER (0..2147483647) -- UNITS RMS 0.1 Hz
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"The measured input frequency from the PDU meters in tenths of Hz."
+	::= { pdu2InputEntry 2 }
+
+pdu2InputFrequencyStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		outOfRange (2)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Status of the measured input frequency relative to the nominal frequency and the admitted tolerance."
+	::= { pdu2InputEntry 3 }
+
+pdu2InputPowerVA  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input VA of all phases.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputEntry 4 }
+
+pdu2InputPowerWatts  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input Watts of all phases.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputEntry 5 }
+
+pdu2InputPowerWattHour  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input Watt-Hour value for all phases.  Units are WH. This value can be reset to 0 
+                using GUI. In that case, the pdu2InputPowerWattHourTimer will be reset as well  
+                A negative value indicates that this object is not available."
+	::= { pdu2InputEntry 6 }
+
+pdu2InputPowerWattHourTimer  OBJECT-TYPE
+	SYNTAX     DisplayString (SIZE (0..22))  -- display Date Time
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A Timestamp of when the Total Input WH was last reset."
+	::= { pdu2InputEntry 7 }
+
+pdu2InputPowerFactor  OBJECT-TYPE
+	SYNTAX     INTEGER	-- units 0.01
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An input PF value.  Units are in thousandths, for example a power factor
+		 of 0.958 would be returned as 958, and 0.92 would be returned as 920.  
+                 A negative value indicates that this object is not available."
+	::= { pdu2InputEntry 8 }
+
+pdu2InputPowerVAR  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An input VAR value.  Units are VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputEntry 9 }
+
+
+pdu2InputPhaseTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu2InputPhaseEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+           "Aggregate Object with number of entries equal to number of PDUs (pdu2NumberPDU) and
+            number of input phase (pdu2InputPhaseCount)."
+    ::= {pdu2Input 2}
+
+pdu2InputPhaseEntry OBJECT-TYPE
+    SYNTAX Pdu2InputPhaseEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The input table entry containing the voltage, current, frequency, power for each phase.
+            Entries are given with number of pdu and number of input phase 1, 2, or 3."
+    INDEX { pdu2IdentIndex, pdu2InputPhaseIndex }
+    ::= { pdu2InputPhaseTable 1 }
+
+Pdu2InputPhaseEntry ::= SEQUENCE {
+      pdu2InputPhaseIndex      			INTEGER,
+      pdu2InputPhaseVoltageMeasType  		INTEGER,
+      pdu2InputPhaseVoltage    			INTEGER,
+      pdu2InputPhaseVoltageThStatus  		INTEGER,
+      pdu2InputPhaseVoltageThLowerWarning  	INTEGER,
+      pdu2InputPhaseVoltageThLowerCritical  	INTEGER,
+      pdu2InputPhaseVoltageThUpperWarning  	INTEGER,
+      pdu2InputPhaseVoltageThUpperCritical  	INTEGER,
+      pdu2InputPhaseCurrentMeasType		INTEGER,
+      pdu2InputPhaseCurrentRating		INTEGER,
+      pdu2InputPhaseCurrent    			INTEGER,
+      pdu2InputPhaseCurrentThStatus		INTEGER,
+      pdu2InputPhaseCurrentThLowerWarning	INTEGER,
+      pdu2InputPhaseCurrentThLowerCritical	INTEGER,
+      pdu2InputPhaseCurrentThUpperWarning	INTEGER,
+      pdu2InputPhaseCurrentThUpperCritical	INTEGER,
+      pdu2InputPhaseCurrentCrestFactor		INTEGER,
+      pdu2InputPhaseCurrentPercentLoad		INTEGER,
+      pdu2InputPhasePowerMeasType		INTEGER,
+      pdu2InputPhasePowerVA			INTEGER,
+      pdu2InputPhasePowerWatts 			INTEGER,
+      pdu2InputPhasePowerWattHour		INTEGER,
+      pdu2InputPhasePowerWattHourTimer		DisplayString,
+      pdu2InputPhasePowerFactor			INTEGER,
+      pdu2InputPhasePowerVAR			INTEGER
+    }
+
+pdu2InputPhaseIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the Pdu2InputEntry table."
+    ::= { pdu2InputPhaseEntry 1}
+
+pdu2InputPhaseVoltageMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		phase1toN (2),
+		phase2toN (3),
+		phase3toN (4),
+		phase1to2 (5),
+		phase2to3 (6),
+		phase3to1 (7)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Value indicates what input voltage is being measured in this table row - single phase
+		voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2,
+		phase 2 to phase 3, or phase 3 to phase 1."
+	::= { pdu2InputPhaseEntry 2 }
+
+pdu2InputPhaseVoltage OBJECT-TYPE
+    SYNTAX   INTEGER    -- UNITS RMS 0.001 Volts
+    ACCESS   read-only
+    STATUS   mandatory
+    DESCRIPTION
+	"An input voltage measurement value.  Units are millivolts."
+    ::= {pdu2InputPhaseEntry 3}
+
+pdu2InputPhaseVoltageThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured input voltage relative to the configured thresholds."
+	::= { pdu2InputPhaseEntry 4 }
+
+pdu2InputPhaseVoltageThLowerWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 5 }
+
+pdu2InputPhaseVoltageThLowerCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 6 }
+
+pdu2InputPhaseVoltageThUpperWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 7 }
+
+pdu2InputPhaseVoltageThUpperCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.001 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 8 }
+
+pdu2InputPhaseCurrentMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		neutral (2),
+		phase1 (3),
+		phase2 (4),
+		phase3 (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Which input wire is being measured in this table row - single phase, neutral, phase 1,
+		phase 2, or phase 3."
+	::= { pdu2InputPhaseEntry 9 }
+
+pdu2InputPhaseCurrentRating  OBJECT-TYPE
+	SYNTAX   INTEGER		-- Units in 0.001 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Rated current capacity of the input.  A negative value indicates that
+		the hardware current capacity is unknown.  Units are milliamps."
+	::= { pdu2InputPhaseEntry 10 }
+
+pdu2InputPhaseCurrent  OBJECT-TYPE
+	SYNTAX   INTEGER		-- Units in 0.001 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"An input current measurement value.  Units are milliamps."
+	::= { pdu2InputPhaseEntry 11 }
+
+pdu2InputPhaseCurrentThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured input current relative to the configured thresholds."
+	::= { pdu2InputPhaseEntry 12 }
+
+pdu2InputPhaseCurrentThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units in 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 13 }
+
+pdu2InputPhaseCurrentThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units in 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 14 }
+
+pdu2InputPhaseCurrentThUpperWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..100000)		-- Units in 0.001 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 15 }
+
+pdu2InputPhaseCurrentThUpperCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..100000)		-- Units in 0.001 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 16 }
+
+pdu2InputPhaseCurrentCrestFactor  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units in 0.001
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current crest factor.  Units are in milli, for example a crest factor of
+                  1.414 will be returned as 1414.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 17 }
+
+pdu2InputPhaseCurrentPercentLoad  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current percent load, based on the rated current capacity.  Units are
+                  percentage, for example 80% will be returned as 80.  A negative
+                  value indicates that this object is not available."
+	::= { pdu2InputPhaseEntry 18 }
+
+pdu2InputPhasePowerMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		neutral (2),
+		phase1 (3),
+		phase2 (4),
+		phase3 (5)
+	 }
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Which input wire is being measured in this table row - single phase, neutral, phase 1,
+		phase 2, or phase 3."
+	::= { pdu2InputPhaseEntry 19 }
+
+pdu2InputPhasePowerVA  OBJECT-TYPE
+	SYNTAX    INTEGER
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input VA value.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 20 }
+
+pdu2InputPhasePowerWatts  OBJECT-TYPE
+	SYNTAX    INTEGER
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input Watts value.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 21 }
+
+pdu2InputPhasePowerWattHour  OBJECT-TYPE
+	SYNTAX     INTEGER 
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A Watt-Hour value for each Input phase.  Units are WH. This value can be reset to 0 
+                 using GUI. In that case, the pdu2InputPhasePowerWattHourTimer will be reset as well    
+                 A negative value indicates that this object is not available."
+	::= { pdu2InputPhaseEntry 22 }
+
+pdu2InputPhasePowerWattHourTimer  OBJECT-TYPE
+	SYNTAX    DisplayString (SIZE (0..22))  -- display Date Time
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Timestamp of when input Watt-hours (inputWh) was last reset."
+	::= { pdu2InputPhaseEntry 23 }
+
+pdu2InputPhasePowerFactor  OBJECT-TYPE
+	SYNTAX    INTEGER		-- units 0.001
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input PF value.  Units are in thousandths, for example a power factor
+                 of 0.958 would be returned as 958, and 0.92 would be returned 
+		 as 920.  A negative value indicates that this object is not available."
+	::= { pdu2InputPhaseEntry 24 }
+
+pdu2InputPhasePowerVAR  OBJECT-TYPE
+	SYNTAX    INTEGER
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input VAR value.  Units are VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2InputPhaseEntry 25 }
+
+
+
+-- ====================================================================================
+--
+--  pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
+--  pdu2Group                OBJECT IDENTIFIER       ::= { pdu2 3 }
+--  PDU2 Output groups of outlets 
+--  OID= .1.3.6.1.4.1.232.165.7.3
+
+
+pdu2GroupTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu2GroupEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to number of PDUs
+                 and number of breakers (pdu2GroupCount)."
+    ::= { pdu2Group 1 }
+
+pdu2GroupEntry OBJECT-TYPE
+    SYNTAX Pdu2GroupEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The input table entry containing the name, voltages, currents, power, etc."
+    INDEX { pdu2IdentIndex, pdu2GroupIndex }
+    ::= { pdu2GroupTable 1 }
+
+Pdu2GroupEntry ::= SEQUENCE {
+      pdu2GroupIndex         		INTEGER,
+      pdu2GroupName	     		DisplayString,
+      pdu2GroupType          		INTEGER,
+      pdu2GroupVoltageMeasType		INTEGER,
+      pdu2GroupVoltage          	INTEGER,
+      pdu2GroupVoltageThStatus		INTEGER,
+      pdu2GroupVoltageThLowerWarning	INTEGER,
+      pdu2GroupVoltageThLowerCritical	INTEGER,
+      pdu2GroupVoltageThUpperWarning	INTEGER,
+      pdu2GroupVoltageThUpperCritical	INTEGER,
+      pdu2groupCurrentRating		INTEGER,
+      pdu2GroupCurrent			INTEGER,
+      pdu2GroupCurrentThStatus		INTEGER,
+      pdu2GroupCurrentThLowerWarning	INTEGER,
+      pdu2GroupCurrentThLowerCritical	INTEGER,
+      pdu2GroupCurrentThUpperWarning	INTEGER,
+      pdu2GroupCurrentThUpperCritical	INTEGER,
+      pdu2GroupCurrentCrestFactor	INTEGER,
+      pdu2GroupCurrentPercentLoad	INTEGER,
+      pdu2GroupPowerVA			INTEGER,
+      pdu2GroupPowerWatts		INTEGER,
+      pdu2GroupPowerWattHour		INTEGER,
+      pdu2GroupPowerWattHourTimer	DisplayString,
+      pdu2GroupPowerFactor		INTEGER,
+      pdu2GroupPowerVAR			INTEGER,
+      pdu2GroupOutletCount	 	INTEGER,
+      pdu2GroupBreakerStatus    	INTEGER    
+    }
+
+pdu2GroupIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the Pdu2GroupEntry table."
+    ::= { pdu2GroupEntry 1 }
+
+pdu2GroupName  OBJECT-TYPE
+	SYNTAX    DisplayString (SIZE(1..31))
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A descriptive name for the group."
+	::= { pdu2GroupEntry 2 }
+
+pdu2GroupType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		breaker1pole (2),
+		breaker2pole (3),
+		breaker3pole (4),
+		outletSection (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"The type of the group. (5) has no breaker"
+	::= { pdu2GroupEntry 3 }
+
+pdu2GroupVoltageMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		phase1toN (2),
+		phase2toN (3),
+		phase3toN (4),
+		phase1to2 (5),
+		phase2to3 (6),
+		phase3to1 (7)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Value indicates what input voltage is being measured in this table row - single phase
+		voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2,
+		phase 2 to phase 3, or phase 3 to phase 1."
+	::= { pdu2GroupEntry 4 }
+
+pdu2GroupVoltage  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.001 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Units are millivolts."
+	::= { pdu2GroupEntry 5 }
+
+pdu2GroupVoltageThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Status of the measured group voltage relative to the configured thresholds."
+	::= { pdu2GroupEntry 6 }
+
+pdu2GroupVoltageThLowerWarning  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..500000)		-- Units 0.001 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 7 }
+
+pdu2GroupVoltageThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..500000)		-- Units 0.001 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 8 }
+
+pdu2GroupVoltageThUpperWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..500000)		-- Units 0.001 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 9 }
+
+pdu2GroupVoltageThUpperCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..500000)		-- Units 0.001 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are millivolts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 10 }
+
+pdu2groupCurrentRating  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Rated current capacity of the group.  Units are milliamps.  A negative 
+		      value indicates that the hardware current capacity is unknown (it
+		      will always be unknown for custom groups)."
+	::= { pdu2GroupEntry 11 }
+
+pdu2GroupCurrent  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A group current measurement value.  Units are milliamps."
+	::= { pdu2GroupEntry 12 }
+
+pdu2GroupCurrentThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured group current relative to the configured thresholds."
+	::= { pdu2GroupEntry 13 }
+
+pdu2GroupCurrentThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 14 }
+
+pdu2GroupCurrentThLowerCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 15 }
+
+pdu2GroupCurrentThUpperWarning  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 16 }
+
+pdu2GroupCurrentThUpperCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 17 }
+
+pdu2GroupCurrentCrestFactor  OBJECT-TYPE
+	SYNTAX     INTEGER		-- units 0.001
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current crest factor.  Units are in milli, for example a crest factor of
+                  1.414 will be returned as 1414.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 18 }
+
+pdu2GroupCurrentPercentLoad  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current percent load, based on the rated current capacity.  Units are
+                  percentage, for example 80% will be returned as 80.  A negative
+                  value indicates that this object is not available."
+	::= { pdu2GroupEntry 19 }
+
+pdu2GroupPowerVA  OBJECT-TYPE
+	SYNTAX     INTEGER  	-- units in VA
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group VA value.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 20 }
+
+pdu2GroupPowerWatts  OBJECT-TYPE
+	SYNTAX     INTEGER	-- units in Watt
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group Watts value.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 21 }
+
+pdu2GroupPowerWattHour  OBJECT-TYPE
+	SYNTAX     INTEGER 	-- Units in Watt-Hour
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A Watt-Hour value for each section.  Units are WH. This value can be reset to 0 
+                 using GUI. In that case, the pdu2GroupPowerWattHourTimer will be reset as well.    
+                 A negative value indicates that this object is not available."
+	::= { pdu2GroupEntry 22 }
+
+pdu2GroupPowerWattHourTimer  OBJECT-TYPE
+	SYNTAX     DisplayString (SIZE (0..22))	-- display Date and Time
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Timestamp of when group Watt-hours (groupWh) was last reset."
+	::= { pdu2GroupEntry 23 }
+
+pdu2GroupPowerFactor  OBJECT-TYPE
+	SYNTAX     INTEGER
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group PF value.  Units are in thousandths, for example a power factor
+                  of 0.958 would be returned as 958, and 0.92 would be returned as 920.  
+                 A negative value indicates that this object is not available."
+	::= { pdu2GroupEntry 24 }
+
+pdu2GroupPowerVAR  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units in VAR
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group VAR value.  Units are VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2GroupEntry 25 }
+
+pdu2GroupOutletCount  OBJECT-TYPE
+    	SYNTAX     INTEGER (0..63)
+    	ACCESS     read-only
+    	STATUS     mandatory
+    	DESCRIPTION 
+		"The number of outlets in each group (breaker)."
+         ::= { pdu2GroupEntry 26 }
+
+pdu2GroupBreakerStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		notApplicable (1),
+		breakerOn (2),
+		breakerOff (3)
+	}
+	ACCESS 	   read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Only applicable to groups with breaker.  Indicates whether a breaker is turned
+		      off or on."
+	::= { pdu2GroupEntry 27 }
+
+-- ====================================================================================
+--
+--  pdu2                     OBJECT IDENTIFIER       ::= {cpqPower 7}  
+--  pdu2Environment          OBJECT IDENTIFIER       ::= { pdu2 4 }
+--  PDU2 Environment group
+--  OID= .1.3.6.1.4.1.232.165.7.4
+
+pdu2EnvProbeTable  OBJECT-TYPE
+	SYNTAX 	SEQUENCE OF Pdu2EnvProbeEntry
+	ACCESS 	not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"A list of environment probe (1 per PDU) for temperature, humidity, and contacts.  
+                 The number of entries is given by number of PDUs in daisy chain."
+	::= { pdu2Environment 1 }
+
+pdu2EnvProbeEntry  OBJECT-TYPE
+	SYNTAX 	Pdu2EnvProbeEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"Aggregate entries equal to number of PDUs."
+	INDEX { pdu2IdentIndex }
+	::= { pdu2EnvProbeTable 1 }
+
+Pdu2EnvProbeEntry ::= SEQUENCE {
+	pdu2TemperatureScale		INTEGER,
+	pdu2TemperatureCount		INTEGER,
+	pdu2HumidityCount		INTEGER,
+	pdu2ContactCount		INTEGER
+}
+
+pdu2TemperatureScale  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		celsius (1),
+		fahrenheit (2)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Scale used to return temperature objects."
+	::= { pdu2EnvProbeEntry 1 }
+
+pdu2TemperatureCount  OBJECT-TYPE
+	SYNTAX  INTEGER
+	ACCESS 	read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Max number of temperature measurements (1 per probe)."
+	::= { pdu2EnvProbeEntry 2  }
+
+pdu2HumidityCount  OBJECT-TYPE
+	SYNTAX  INTEGER
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Max number of humidity measurements  (1 per probe)."
+	::= { pdu2EnvProbeEntry 3 }
+
+pdu2ContactCount  OBJECT-TYPE
+	SYNTAX   INTEGER
+	ACCESS 	 read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Max number of contact sensors  (1 per probe)."
+	::= { pdu2EnvProbeEntry 4 }
+
+-- ========Temperature Measurements ============
+
+pdu2TemperatureTable  OBJECT-TYPE
+	SYNTAX 	SEQUENCE OF Pdu2TemperatureEntry
+	ACCESS 	not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"A list of temperature probe measurements.  The number of entries are
+		 given by number of pdu and pdu2TemperatureCount."
+	::= { pdu2Environment 2 }
+
+pdu2TemperatureEntry  OBJECT-TYPE
+	SYNTAX 	Pdu2TemperatureEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"An entry for a temperature measurement."
+	INDEX { pdu2IdentIndex, pdu2TemperatureIndex }
+	::= { pdu2TemperatureTable 1 }
+
+Pdu2TemperatureEntry ::= SEQUENCE {
+	pdu2TemperatureIndex		INTEGER,
+	pdu2TemperatureName		DisplayString,
+	pdu2TemperatureProbeStatus	INTEGER,
+	pdu2TemperatureValue		INTEGER,
+	pdu2TemperatureThStatus		INTEGER,
+	pdu2TemperatureThLowerWarning	INTEGER,
+	pdu2TemperatureThLowerCritical	INTEGER,
+	pdu2TemperatureThUpperWarning	INTEGER,
+	pdu2TemperatureThUpperCritical	INTEGER
+}
+
+pdu2TemperatureIndex  OBJECT-TYPE
+	SYNTAX   INTEGER (1..2)
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A unique value for each temperature probe measurement.  Its value
+		      ranges from 1 to temperatureCount."
+	::= { pdu2TemperatureEntry 1 }
+
+pdu2TemperatureName  OBJECT-TYPE
+	SYNTAX   DisplayString (SIZE(1..31))
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A descriptive name for the temperature probe."
+	::= { pdu2TemperatureEntry 2 }
+
+pdu2TemperatureProbeStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		disconnected (1),
+		connected (2),
+		bad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Indicates whether a probe is connected or not."
+	::= { pdu2TemperatureEntry 3 }
+
+pdu2TemperatureValue  OBJECT-TYPE
+	SYNTAX    INTEGER  --0.1 Fahrenheit or Celsius
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Units are in tenths of a degree (either Fahrenheit or Celsius). 
+                 Divide by ten to get degrees."
+	::= { pdu2TemperatureEntry 4 }
+
+pdu2TemperatureThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured temperature relative to the configured thresholds."
+	::= { pdu2TemperatureEntry 5 }
+
+pdu2TemperatureThLowerWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..150000)  -- 0.1 of a degree
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are tenths of a degree.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2TemperatureEntry 6 }
+
+pdu2TemperatureThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..150000)   -- 0.1 of a degree
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are tenths of a degree.  A negative value
+		          indicates that this object is not available."
+	::= { pdu2TemperatureEntry 7 }
+
+pdu2TemperatureThUpperWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..150000)    -- 0.1 of a degree
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are tenths of a degree.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2TemperatureEntry 8 }
+
+pdu2TemperatureThUpperCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..150000)   -- 0.1 of a degree
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are tenths of a degree.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2TemperatureEntry 9 }
+
+-- ==========Humidity Measurements ==========
+
+pdu2HumidityTable  OBJECT-TYPE
+	SYNTAX   SEQUENCE OF Pdu2HumidityEntry
+	ACCESS   not-accessible
+	STATUS   mandatory
+	DESCRIPTION 
+		"A list of humidity probe measurements.  The number of entries are
+		 given by number of pdu and pdu2HumidityCount."
+	::= { pdu2Environment 3 }
+
+pdu2HumidityEntry  OBJECT-TYPE
+	SYNTAX 	Pdu2HumidityEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"An entry for a humidity measurement."
+	INDEX { pdu2IdentIndex, pdu2HumidityIndex }
+	::= { pdu2HumidityTable 1 }
+
+Pdu2HumidityEntry ::= SEQUENCE {
+	pdu2HumidityIndex		INTEGER,
+	pdu2HumidityName		DisplayString,
+	pdu2HumidityProbeStatus		INTEGER,
+	pdu2HumidityValue		INTEGER,
+	pdu2HumidityThStatus		INTEGER,
+	pdu2HumidityThLowerWarning	INTEGER,
+	pdu2HumidityThLowerCritical	INTEGER,
+	pdu2HumidityThUpperWarning	INTEGER,
+	pdu2HumidityThUpperCritical	INTEGER
+}
+
+pdu2HumidityIndex  OBJECT-TYPE
+	SYNTAX     INTEGER (1..2)
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A unique value for each humidity probe measurement.  Its value
+		 ranges from 1 to pdu2HumidityCount per pdu."
+	::= { pdu2HumidityEntry 1 }
+
+pdu2HumidityName  OBJECT-TYPE
+	SYNTAX   DisplayString (SIZE(1..31))
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A descriptive name for the humidity probe."
+	::= { pdu2HumidityEntry 2 }
+
+pdu2HumidityProbeStatus  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		disconnected (1),
+		connected (2),
+		bad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Indicates whether a probe is connected or not."
+	::= { pdu2HumidityEntry 3 }
+
+pdu2HumidityValue  OBJECT-TYPE
+	SYNTAX    INTEGER   -- 0.1 of %RH
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Units are tenths of a percent relative humidity.  Divide the value by 10 to get %RH."
+	::= { pdu2HumidityEntry 4 }
+
+pdu2HumidityThStatus  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured humidity relative to the configured thresholds."
+	::= { pdu2HumidityEntry 5 }
+
+pdu2HumidityThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..1000)   -- 0.1 of %RH
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are 0.1 %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2HumidityEntry 6 }
+
+pdu2HumidityThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..1000)  -- 0.1 of %RH
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are 0.1 %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2HumidityEntry 7 }
+
+pdu2HumidityThUpperWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..1000)   -- 0.1 of %RH
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are 0.1 %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2HumidityEntry 8 }
+
+pdu2HumidityThUpperCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..1000)   -- 0.1 of %RH
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are 0.1 %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu2HumidityEntry 9 }
+
+-- ======Dry Contacts Status==========
+
+pdu2ContactTable  OBJECT-TYPE
+	SYNTAX  SEQUENCE OF Pdu2ContactEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"A list of contact sensors.  The number of entries are
+		 given by number of pdu and pdu2ContactCount."
+	::= { pdu2Environment 4 }
+
+pdu2ContactEntry  OBJECT-TYPE
+	SYNTAX 	 Pdu2ContactEntry
+	ACCESS   not-accessible
+	STATUS   mandatory
+	DESCRIPTION 
+		"An entry for a contact sensor"
+	INDEX { pdu2IdentIndex, pdu2ContactIndex }
+	::= { pdu2ContactTable 1 }
+
+Pdu2ContactEntry ::= SEQUENCE {
+	pdu2ContactIndex	INTEGER,
+	pdu2ContactName		DisplayString,
+	pdu2ContactProbeStatus	INTEGER,
+	pdu2ContactState	INTEGER
+}
+
+pdu2ContactIndex  OBJECT-TYPE
+	SYNTAX   INTEGER (1..3)
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A unique value for each contact sensor.  Its value ranges from 1 to
+		      contactCount."
+	::= { pdu2ContactEntry 1 }
+
+pdu2ContactName  OBJECT-TYPE
+	SYNTAX    DisplayString (SIZE(1..31))
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A descriptive name for the contact sensor."
+	::= { pdu2ContactEntry 2 }
+
+pdu2ContactProbeStatus  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		disconnected (1),
+		connected (2),
+		bad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Indicates whether a probe is connected or not.
+		Will not be returned  if the contact sensor is internal to the ePDU,
+		in that case only contactState should be read."
+	::= { pdu2ContactEntry 3 }
+
+pdu2ContactState  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		contactOpen (1),
+		contactClosed (2),
+		contactBad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"The state of the contact sensor."
+	::= { pdu2ContactEntry 4 }
+
+
+-- ====================================================================================
+--
+--  pdu2                    OBJECT IDENTIFIER       ::= {cpqPower 7}    
+--  pdu2Outlet               OBJECT IDENTIFIER       ::= { pdu2 5 }
+--  PDU2 Outlet group
+--  OID= .1.3.6.1.4.1.232.165.7.5
+
+pdu2OutletTable  OBJECT-TYPE
+	SYNTAX SEQUENCE OF Pdu2OutletEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"Aggregate Object with number of entries equal to Number of PDU (pdu2IdentIndex)
+                 and Number of outlet per PDU (pdu2OutletIndex)."
+	::= { pdu2Outlet 1 }
+
+pdu2OutletEntry  OBJECT-TYPE
+	SYNTAX 	Pdu2OutletEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"The Outlet table entry containing the type, voltage, current etc."
+  INDEX { pdu2IdentIndex, pdu2OutletIndex }
+	::= { pdu2OutletTable 1 }
+
+Pdu2OutletEntry ::= SEQUENCE {
+	pdu2OutletIndex				INTEGER,
+	pdu2OutletName				DisplayString,
+	pdu2OutletType				INTEGER,
+	pdu2OutletCurrentRating			INTEGER,
+	pdu2OutletCurrent			INTEGER,
+	pdu2OutletCurrentThStatus		INTEGER,
+	pdu2OutletCurrentThLowerWarning		INTEGER,
+	pdu2OutletCurrentThLowerCritical	INTEGER,
+	pdu2OutletCurrentThUpperWarning		INTEGER,
+	pdu2OutletCurrentThUpperCritical	INTEGER,
+	pdu2OutletCurrentCrestFactor		INTEGER,
+	pdu2OutletCurrentPercentLoad		INTEGER,
+	pdu2OutletVA				INTEGER,
+	pdu2OutletWatts				INTEGER,
+	pdu2OutletWh				INTEGER,
+	pdu2OutletWhTimer			DisplayString,
+	pdu2OutletPowerFactor			INTEGER,
+	pdu2OutletVAR				INTEGER
+}
+
+pdu2OutletIndex OBJECT-TYPE
+    	SYNTAX INTEGER	(0..100)
+    	ACCESS read-only
+    	STATUS mandatory
+    	DESCRIPTION
+		"Index for each outlet, value from 1 to the number of outlets per PDU."
+    	::= { pdu2OutletEntry 1 }
+
+pdu2OutletName  OBJECT-TYPE
+	SYNTAX   DisplayString (SIZE(1..31))
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A descriptive name for the outlet."
+	::= { pdu2OutletEntry 2 }
+
+pdu2OutletType  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		iecC13 (1),
+		iecC19 (2),
+		uk (10),
+		french (11),
+		schuko (12),
+		nema515 (20),
+		nema51520 (21),
+		nema520 (22),
+		nemaL520 (23),
+		nemaL530 (24),
+		nema615 (25),
+		nema620 (26),
+		nemaL620 (27),
+		nemaL630 (28),
+		nemaL715 (29),
+		rf203p277 (30)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Type of this outlet - C13, C19."
+	::= { pdu2OutletEntry 3 }
+
+pdu2OutletCurrentRating  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Rated current capacity of this outlet.  Units are milliamps.  A negative 
+		 value indicates that the hardware current capacity is unknown."
+	::= { pdu2OutletEntry 4 }
+
+pdu2OutletCurrent  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A outlet current measurement value.  Units are milliamps."
+	::= { pdu2OutletEntry 5 }
+
+pdu2OutletCurrentThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured outlet current relative to the configured thresholds."
+	::= { pdu2OutletEntry 6 }
+
+pdu2OutletCurrentThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 7 }
+
+pdu2OutletCurrentThLowerCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 8 }
+
+pdu2OutletCurrentThUpperWarning  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 9 }
+
+pdu2OutletCurrentThUpperCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.001 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are milliamps.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 10 }
+
+pdu2OutletCurrentCrestFactor  OBJECT-TYPE
+	SYNTAX     INTEGER		-- units 0.001
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current crest factor.  Units are in milli, for example a crest factor of
+                  1.414 will be returned as 1414.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 11 }
+
+pdu2OutletCurrentPercentLoad  OBJECT-TYPE
+	SYNTAX     INTEGER		-- unit in percentage
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current percent load, based on the rated current capacity.  Units are
+                  percentage, for example 80% will be returned as 80.  A negative
+                  value indicates that this object is not available."
+	::= { pdu2OutletEntry 12 }
+
+pdu2OutletVA  OBJECT-TYPE
+	SYNTAX     INTEGER  	-- units in VA
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A outlet VA value.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 13 }
+
+pdu2OutletWatts  OBJECT-TYPE
+	SYNTAX     INTEGER	-- units in Watt
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A outlet Watts value.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 14 }
+
+pdu2OutletWh  OBJECT-TYPE
+	SYNTAX     INTEGER 	-- Units in Watt-Hour
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A Watt-Hour value for each outlet.  Units are WH.
+This object is writable so that it can be reset to 0.  When it is
+		written to, the pdu2OutletWhTimer will be reset updated as well    
+      A negative value indicates that this object is not available."
+	::= { pdu2OutletEntry 15 }
+
+pdu2OutletWhTimer  OBJECT-TYPE
+	SYNTAX     DisplayString (SIZE (0..22))	-- display Date and Time
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Timestamp (date and time) of outlet Watt-hours was last reset."
+	::= { pdu2OutletEntry 16 }
+
+pdu2OutletPowerFactor  OBJECT-TYPE
+	SYNTAX     INTEGER		-- units are in 0.001
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An outlet PF value.  Units are in thousandths, for example a power factor
+                  of 0.958 would be returned as 958, and 0.92 would be returned 
+		          as 920.  A negative value indicates that this object is not available."
+	::= { pdu2OutletEntry 17 }
+
+pdu2OutletVAR  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units in VAR
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An outlet VAR value.  Units are VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu2OutletEntry 18 }
+
+
+
+-- ====================== PDU Outlet Control=====================
+
+pdu2OutletControlTable  OBJECT-TYPE
+	SYNTAX SEQUENCE OF Pdu2OutletControlEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"Aggregate Object with number of entries equal to Number of PDU (pdu2IdentIndex) 
+                 and Number of outlets per PDU (pdu2OutletIndex)."
+	::= { pdu2Outlet 2 }
+
+pdu2OutletControlEntry  OBJECT-TYPE
+	SYNTAX 	Pdu2OutletControlEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"The Outlet table entry containing the type, voltage, current etc."
+  INDEX { pdu2IdentIndex, pdu2OutletIndex }
+	::= { pdu2OutletControlTable 1 }
+
+Pdu2OutletControlEntry ::= SEQUENCE {
+
+	pdu2OutletControlStatus			INTEGER,
+	pdu2OutletControlOffCmd			INTEGER,
+	pdu2OutletControlOnCmd			INTEGER,
+	pdu2OutletControlRebootCmd		INTEGER,
+	pdu2OutletControlPowerOnState		INTEGER,
+	pdu2OutletControlSequenceDelay		INTEGER,
+	pdu2OutletControlRebootOffTime		INTEGER,
+	pdu2OutletControlSwitchable		INTEGER,
+	pdu2OutletControlShutoffDelay		INTEGER
+}
+
+pdu2OutletControlStatus  OBJECT-TYPE
+    	SYNTAX 		INTEGER	{
+			off (1),
+			on (2),
+			pendingOff (3),
+			pendingOn (4)
+			}
+    	ACCESS 		read-only
+    	STATUS 		mandatory
+    	DESCRIPTION
+		"current state of a control outlet."
+    	::= { pdu2OutletControlEntry 1 }
+
+pdu2OutletControlOffCmd  OBJECT-TYPE
+    	SYNTAX 		 INTEGER (-1..99999)		
+    	ACCESS 		 read-write
+    	STATUS 		 mandatory
+    	DESCRIPTION
+		"When write, once issued, the outlet will turn Off immediately.
+                 0-n: Time in seconds until the outlet command is issued
+                 -1: Cancel a pending outlet Off command
+		 When read, returns -1 if no command is pending, or the current downcount in 
+                 seconds of a pending command."
+    	::= { pdu2OutletControlEntry 2 }
+
+pdu2OutletControlOnCmd  OBJECT-TYPE
+    	SYNTAX 		INTEGER (-1..99999)		
+    	ACCESS 		read-write
+    	STATUS 		mandatory
+    	DESCRIPTION
+		"When write, once issued, the outlet will turn On immediately.
+                 0-n: Time in seconds until the outlet command is issued
+                 -1: Cancel a pending outlet On command
+		 When read, returns -1 if no command is pending, or the current downcount in 
+                 seconds of a pending command."
+    	::= { pdu2OutletControlEntry 3 }
+
+pdu2OutletControlRebootCmd  OBJECT-TYPE
+    	SYNTAX 		    INTEGER (-1..99999)		
+    	ACCESS 		    read-write
+    	STATUS 		    mandatory
+    	DESCRIPTION
+		"When write, for outlets that are On prior to this Reboot command, they will 
+                 switch Off immediately when the command is issued, remain Off for 
+                 outletControlRebootOffTime seconds, and then turn back On.
+		 For outlets that are Off prior to the Reboot command, they will turn On after 
+                 a delay of outletControlRebootOffTime seconds from when the command is issued.
+		 0-n : Time in seconds until the Reboot command is issued
+		 -1 : Cancel a pending outlet Reboot command 
+		
+		When read, returns -1 if no command is pending, or the current downcount in 
+                seconds of a pending command."
+    	::= { pdu2OutletControlEntry 4 }
+
+pdu2OutletControlPowerOnState  OBJECT-TYPE
+    	SYNTAX 		    INTEGER {
+		            off (1),
+		            on (2),
+		            lastState (3)
+                            }	
+    	ACCESS 		    read-write
+    	STATUS 		    mandatory
+    	DESCRIPTION
+		"Determines the outlet state when power is applied to the unit.
+		1 : not restart at device startup
+		2 : should sequence back ON in line with outletControlSequenceTime
+		3 : should take the state the outlet had when power was lost.
+		If the state was ON, should sequence back ON in line with outletControlSequenceTime."
+    	::= { pdu2OutletControlEntry 5 }
+
+pdu2OutletControlSequenceDelay  OBJECT-TYPE
+    	SYNTAX 		        INTEGER (-1..99999)		
+    	ACCESS 		        read-write
+    	STATUS 		        mandatory
+    	DESCRIPTION
+		"Time delay in seconds from when a Global Sequence On command is issued to
+		when the command is executed on this outlet.  This delay is also used as a power-on
+		delay. Set to -1 to exclude this outlet from Global Sequence On commands."
+    	::= { pdu2OutletControlEntry 6 }
+
+pdu2OutletControlRebootOffTime  OBJECT-TYPE
+    	SYNTAX 		        INTEGER (-1..99999)		
+    	ACCESS 		        read-write
+    	STATUS 		        mandatory
+    	DESCRIPTION
+		"Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command."
+    	::= { pdu2OutletControlEntry 7 }
+
+pdu2OutletControlSwitchable  OBJECT-TYPE
+    	SYNTAX 		    INTEGER {
+		            switchable (1),
+		            notSwitchable (2)
+                            }	
+    	ACCESS 		    read-write
+    	STATUS 		    mandatory
+    	DESCRIPTION
+		"Determines the outlet capability to be controlled On/Off from the communication channels.
+		1 : control On/Off enabled
+		2 : control On/Off disabled."
+    	::= { pdu2OutletControlEntry 8 }
+
+pdu2OutletControlShutoffDelay  OBJECT-TYPE
+    	SYNTAX 		        INTEGER (-1..99999)		
+    	ACCESS 		        read-write
+    	STATUS 		        mandatory
+    	DESCRIPTION
+		"Time delay in seconds that could be taken in account before shutting of the outlet.
+    An application which need to shutoff properly an outlet will read this parameter first
+    then write it to the command pdu2OutletControlOffCmd."
+    	::= { pdu2OutletControlEntry 9 }
+
+
+
+
+-- ===========================================================================================================
+--
+--                         High Voltage PDU
+-- Model 1: Dual Node, DLC (direct liquid cooling) (1 input, 2 monitored outputs (2A and 3.4A), ignore 4 of 25.4A outlets)
+-- Model 2: Single Node, non-DLC (direct liquid cooling) (1 monitored input, 5 monitored outputs)
+-- SNMP Agent is implemented on APM module connecting to hpdu via a serial communication.
+--
+-- ============================================================================================================
+--
+--  hpdu                     OBJECT IDENTIFIER       ::= {cpqPower 9}    
+--  hpduIdent                OBJECT IDENTIFIER       ::= { hpdu 1 }
+--  hpdu (or iPDU) identification group
+--  OID= .1.3.6.1.4.1.232.165.9.1
+
+hpduNumPhase OBJECT-TYPE
+    SYNTAX INTEGER (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"for 3 phases"
+    ::= { hpduIdent 1 }
+   
+hpduIdentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF HpduIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Indexed by 1 Hpdu unit."
+    ::= { hpduIdent 2 }
+
+hpduIdentEntry OBJECT-TYPE
+    SYNTAX HpduIdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The table entry containing the identifications of HPDU"
+    INDEX { hpduIdentIndex }
+    ::= { hpduIdentTable 1 }
+
+HpduIdentEntry ::= SEQUENCE {
+	hpduIdentIndex			INTEGER,
+	hpduManufacturer		DisplayString,
+	hpduModel			DisplayString,
+	hpduName			DisplayString,
+	hpduFirmwareVersion		DisplayString,
+	hpduHardwareVersion		DisplayString,
+	hpduPartNumber			DisplayString,
+	hpduSerialNumber		DisplayString,
+	hpduUUID			DisplayString,
+	hpduType			DisplayString,
+	hpduPowerRating			DisplayString,
+	hpduInputRating			DisplayString,
+        hpduRegionalNominalVoltage	DisplayString,
+	hpduNumOutputBreakers		INTEGER, 
+	hpduNumMonitoredOutlet		INTEGER, 
+	hpduFanStatus			DisplayString,
+
+    hpduTemperature				INTEGER
+    }
+
+hpduIdentIndex OBJECT-TYPE
+    SYNTAX INTEGER (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the MpduIdentEntry table. Start with 1"
+    ::= { hpduIdentEntry 1 }
+
+hpduManufacturer OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           " The Core PDU manufacturer. StringLength=[21]"
+    ::= { hpduIdentEntry 2 }
+
+hpduModel OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU model, marketing name. StringLength=[40]."
+    ::= { hpduIdentEntry 3 }
+
+hpduName OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU name, descriptive name or hostname. StringLength=[16]."
+    ::= { hpduIdentEntry 4 }
+
+hpduFirmwareVersion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU firmware version(s). StringLength=[12]."
+    ::= { hpduIdentEntry 5 }
+
+hpduHardwareVersion OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+            "The Core PDU hardware version. StringLength=[8]."
+    ::= { hpduIdentEntry 6 }
+
+hpduPartNumber OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The Core PDU part number. StringLength=[21]."
+    ::= { hpduIdentEntry 7 }
+
+hpduSerialNumber OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU external serial number. StringLength=[21]."
+    ::= { hpduIdentEntry 8 }
+
+hpduUUID OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's UUID equals PN add SN, canonical conversion. StringLength=[37]."
+    ::= { hpduIdentEntry 9 }
+
+hpduType OBJECT-TYPE
+    SYNTAX  DisplayString
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Type: Delta, Wye, single, Wye+lowline.
+            StringLength=[24]."
+    ::= { hpduIdentEntry 10 }
+
+hpduPowerRating OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Power Rating in KVA (Name Plate). Value is presented 
+            in 1/100 of the KVA. i.e. 1750 means 17.50 KVA"
+    ::= { hpduIdentEntry 11 }
+
+hpduInputRating OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "The PDU's Input Current Rating in A (Name Plate)"
+    ::= { hpduIdentEntry 12 }
+
+
+hpduRegionalNominalVoltage OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "value is either America(208V), Japan(202V) or blank for International Model"
+    ::= { hpduIdentEntry 13 }
+
+hpduNumOutputBreakers OBJECT-TYPE
+    SYNTAX	INTEGER (0..10)
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The number of outlets with breakers of each hpdu."
+    ::= { hpduIdentEntry 14 }
+
+hpduNumMonitoredOutlet OBJECT-TYPE
+    SYNTAX	INTEGER (0..10)
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The number of measured outlets (with CT, VT) of each hpdu."
+    ::= { hpduIdentEntry 15 }
+
+hpduFanStatus OBJECT-TYPE
+    SYNTAX  DisplayString  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "Report fan status: OK or FAIL"
+    ::= { hpduIdentEntry 16 }
+
+hpduTemperature OBJECT-TYPE
+    SYNTAX  INTEGER -- UNITS 0.1 Degree Celcius, Range: 0.0 to 105.0  
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+         "The internal temperature in Celcius. Value is presented in 1/10 of a degree i.e. 251 is 25.1.  A value 
+         of -1 will be returned if the temperature is unable to be measured."
+    ::= { hpduIdentEntry 17 }
+	
+-- ====================================================================================
+--
+--  hpdu                     OBJECT IDENTIFIER       ::= {cpqPower 9}      
+--  hpduIput               OBJECT IDENTIFIER       ::= { hpdu 2 }
+--  High Voltage PDU  Input Measurements (1 hardwired input)
+--  OID= .1.3.6.1.4.1.232.165.9.2
+
+hpduInputTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF HpduInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+           "Indexed by hpduNumPhase."
+    ::= { hpduInput 1 }
+
+hpduInputEntry OBJECT-TYPE
+    SYNTAX HpduInputEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The Input table entry containing the voltage, current, PF,
+            percent load, VA, Watts for the HPDU."
+ 
+    INDEX { hpduInputIndex }
+    ::= { hpduInputTable 1 }
+
+HpduInputEntry ::= SEQUENCE {
+      hpduInputIndex  				INTEGER,
+      hpduInputStatus    			DisplayString,
+      hpduInputBreakerRating  			INTEGER,
+      hpduInputVoltage    			INTEGER,
+      hpduInputCurrent   			INTEGER,
+      hpduInputPowerVA	    			INTEGER,
+      hpduInputPowerWatt      			INTEGER,
+      hpduInputPowerFactor    			INTEGER,
+      hpduInputWarningThreshold    		INTEGER,
+      hpduInputCriticalThreshold    		INTEGER,
+      hpduInputPowerWattHour 			INTEGER,
+      hpduInputTotalEnergySince 		DisplayString,
+      hpduInputEnergyMeteringTotalHours 	INTEGER
+
+    }
+
+hpduInputIndex OBJECT-TYPE
+    SYNTAX INTEGER  (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the hpduInputEntry table."
+    ::= { hpduInputEntry 1 }
+
+hpduInputStatus OBJECT-TYPE
+    SYNTAX  	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the Input: off, on, problem. StringLength=[7]."
+    ::= { hpduInputEntry 2 }
+
+hpduInputBreakerRating OBJECT-TYPE
+    SYNTAX	INTEGER    --UNITS A
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The rating of each hpdu Input in Ampere."
+    ::= { hpduInputEntry 3 }
+
+hpduInputVoltage OBJECT-TYPE
+    SYNTAX INTEGER    -- UNITS RMS 0.1 Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured Input voltage from the PDU meters in volts. Value is 
+         presented in 1/10 of the Volt i.e. 2095 is 209.5 V.  A value 
+         of -1 will be returned if the voltage is unable to be measured."
+    ::= { hpduInputEntry 4 }
+
+hpduInputCurrent OBJECT-TYPE
+    SYNTAX INTEGER    -- UNITS RMS 0.01 Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured Input current from the PDU meters in amps. Value is 
+         presented in 1/100 of the Ampere i.e. 175 is 1.75 A.  A value 
+         of -1 will be returned if the current is unable to be measured."
+    ::= { hpduInputEntry 5 }
+
+hpduInputPowerVA OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units VA
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total Input Power measured in VA.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { hpduInputEntry 6 }
+
+hpduInputPowerWatt OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total Input power measured in Watts.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { hpduInputEntry 7 }
+
+hpduInputPowerFactor OBJECT-TYPE
+    SYNTAX INTEGER    -- 0.01 UNITS
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Input power factor is presented in 1/100 of the unit i.e.
+         98 is 0.98.  A value of -1 will be returned if the power factor is unable 
+         to be measured."
+    ::= { hpduInputEntry 8 }
+
+hpduInputWarningThreshold OBJECT-TYPE
+    SYNTAX INTEGER    -- Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Report the User-setting Input threshhold limit for Warning in percentage"
+    ::= { hpduInputEntry 9 }
+
+hpduInputCriticalThreshold OBJECT-TYPE
+    SYNTAX INTEGER    -- Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Report the User-setting Input threshhold limit for Critical in percentage"
+    ::= { hpduInputEntry 10 }
+
+hpduInputPowerWattHour OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watt-Hour (WH)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Support Billing Grade Energy Metering in Watt-Hour.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { hpduInputEntry 11 }
+
+hpduInputTotalEnergySince OBJECT-TYPE
+    SYNTAX  DisplayString	--display date and time as "MM/DD/YYYY and HH:MM:SS" 
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Display the date and time that starts to accumulate the per Load segment energy in WH. 
+         Date and Time can be set by user on GUI."
+    ::= { hpduInputEntry 12 }
+
+hpduInputEnergyMeteringTotalHours OBJECT-TYPE
+    SYNTAX  INTEGER   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Total hours of collecting measurement data.  A value 
+         of -1 will be returned if the value is unable to be calculated."
+    ::= { hpduInputEntry 13 }
+
+
+
+
+-- ====================================================================================
+--
+--  hpdu                     OBJECT IDENTIFIER       ::= {cpqPower 9}      
+--  hpduOutlet               OBJECT IDENTIFIER       ::= { hpdu 3 }
+--  High Voltage PDU Outlet Measurements (2 for Holder PDU and 5 for others)
+--  OID= .1.3.6.1.4.1.232.165.9.3
+
+hpduOutletTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF HpduOutletEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+           "Indexed by hpduNumMonitoredOutlet and hpduNumPhase . So aggregate objects for each entry 
+            equal to (hpduNumMonitoredOutlet x hpduNumPhase). Start with 1."
+    ::= { hpduOutlet 1 }
+
+hpduOutletEntry OBJECT-TYPE
+    SYNTAX HpduOutletEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The Outlet table entry containing the voltage, current, PF,
+            percent load, VA, Watts for the Modular PDU."
+ 
+    INDEX { hpduNumMonitoredOutlet, hpduNumPhase, hpduOutletIndex }
+    ::= { hpduOutletTable 1 }
+
+HpduOutletEntry ::= SEQUENCE {
+      hpduOutletIndex  				INTEGER,
+      hpduOutletStatus    			DisplayString,
+      hpduOutletBreakerRating  			INTEGER,
+      hpduOutletPercentLoad    			INTEGER,
+      hpduOutletVoltage    			INTEGER,
+      hpduOutletCurrent   			INTEGER,
+      hpduOutletPowerVA	    			INTEGER,
+      hpduOutletPowerWatt      			INTEGER,
+      hpduOutletPowerFactor    			INTEGER,
+      hpduOutletWarningThreshold    		INTEGER,
+      hpduOutletCriticalThreshold    		INTEGER,
+      hpduOutletPowerWattHour 			INTEGER,
+      hpduOutletTotalEnergySince 		DisplayString,
+      hpduOutletEnergyMeteringTotalHours 	INTEGER
+    }
+
+hpduOutletIndex OBJECT-TYPE
+    SYNTAX INTEGER  (0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the hpduOutletEntry table."
+    ::= { hpduOutletEntry 1 }
+
+hpduOutletStatus OBJECT-TYPE
+    SYNTAX  	DisplayString
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the breaker: off, on, problem. StringLength=[7]."
+    ::= { hpduOutletEntry 2 }
+
+hpduOutletBreakerRating OBJECT-TYPE
+    SYNTAX	INTEGER    --UNITS A
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+           "The rating of each hpdu Outlet in Ampere."
+    ::= { hpduOutletEntry 3 }
+
+hpduOutletPercentLoad OBJECT-TYPE
+    SYNTAX INTEGER	 --UNITS 0.1 Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The hpdu's each Outlet load in percent of rated capacity. Value is 
+         presented in 1/10 of the percentage i.e. 125 is 12.5%.  A value 
+         of -1 will be returned if the current is unable to be measured."
+    ::= { hpduOutletEntry 4 }
+
+hpduOutletVoltage OBJECT-TYPE
+    SYNTAX INTEGER    -- UNITS RMS 0.1 Volts
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured Outlet voltage from the PDU meters in volts. Value is 
+         presented in 1/10 of the Volt i.e. 2095 is 209.5 V.  A value 
+         of -1 will be returned if the voltage is unable to be measured."
+    ::= { hpduOutletEntry 5 }
+
+hpduOutletCurrent OBJECT-TYPE
+    SYNTAX INTEGER    -- UNITS RMS 0.01 Amp
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The measured Outlet current from the PDU meters in amps. Value is 
+         presented in 1/100 of the Ampere i.e. 175 is 1.75 A.  A value 
+         of -1 will be returned if the current is unable to be measured."
+    ::= { hpduOutletEntry 6 }
+
+hpduOutletPowerVA OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units VA
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total VA load (VI) measured on the PDU in VA.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { hpduOutletEntry 7 }
+
+hpduOutletPowerWatt OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watts
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"The total power load measured on the PDU in Watts.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { hpduOutletEntry 8 }
+
+hpduOutletPowerFactor OBJECT-TYPE
+    SYNTAX INTEGER    -- 0.01 UNITS
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The power factor is presented in 1/100 of the unit i.e.
+         98 is 0.98.  A value of -1 will be returned if the power factor is unable 
+         to be measured."
+    ::= { hpduOutletEntry 9 }
+
+hpduOutletWarningThreshold OBJECT-TYPE
+    SYNTAX INTEGER    -- Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Report the User-set threshhold limit for Warning in percentage"
+    ::= { hpduOutletEntry 10 }
+
+hpduOutletCriticalThreshold OBJECT-TYPE
+    SYNTAX INTEGER    -- Percents
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Report the User-set threshhold limit for Critical in percentage"
+    ::= { hpduOutletEntry 11 }
+
+hpduOutletPowerWattHour OBJECT-TYPE
+    SYNTAX  INTEGER   -- Units Watt-Hour (WH)
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Support Billing Grade Energy Metering in Watt-Hour.  A value 
+         of -1 will be returned if the power is unable to be calculated."
+    ::= { hpduOutletEntry 12 }
+
+hpduOutletTotalEnergySince OBJECT-TYPE
+    SYNTAX  DisplayString	--display date and time as "MM/DD/YYYY and HH:MM:SS" 
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Display the date and time that starts to accumulate the per Load segment energy in WH. 
+         Date and Time can be set by user on GUI."
+    ::= { hpduOutletEntry 13 }
+
+hpduOutletEnergyMeteringTotalHours OBJECT-TYPE
+    SYNTAX  INTEGER   
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+    	"Total hours of collecting measurement data.  A value 
+         of -1 will be returned if the value is unable to be calculated."
+    ::= { hpduOutletEntry 14 }
+
+
+
+-- ====================================================================================
+--             PDU3 - monitored and managed PDU line
+--             PDU3  (CIS PDU) - Metered PDU - Switched PDU - Metered+Switched PDU
+-- ====================================================================================
+--  
+--  pdu3                     OBJECT IDENTIFIER       ::= {cpqPower 11}  
+--  pdu3Ident                OBJECT IDENTIFIER       ::= { pdu3 1 }
+--  PDU identification group
+--  OID= .1.3.6.1.4.1.232.165.11.1
+
+pdu3NumberPDU OBJECT-TYPE
+    SYNTAX INTEGER (1..2)	-- pdu(0) master or pdu(1) slave1...
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The number of PDUs detected (in its daisy chain)."
+    ::= { pdu3Ident 1 }
+    
+-- ======= pdu3 Identification ===========
+
+pdu3IdentTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu3IdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to pdu3NumberPDU ."
+    ::= { pdu3Ident 2 }
+
+pdu3IdentEntry OBJECT-TYPE
+    SYNTAX Pdu3IdentEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "The ident table entry containing the name, model, manufacturer, 
+                 firmware version, part number, etc."
+    INDEX { pdu3IdentIndex }
+    ::= { pdu3IdentTable 1 }
+
+Pdu3IdentEntry ::= SEQUENCE {
+      	pdu3IdentIndex         		INTEGER,
+      	pdu3Name               		DisplayString,
+      	pdu3Model              		DisplayString,
+      	pdu3Manufacturer       		DisplayString,
+      	pdu3FirmwareVersion    		DisplayString,
+	pdu3FirmwareVersionTimeStamp  	DisplayString,
+      	pdu3PartNumber         		DisplayString,
+      	pdu3SerialNumber       		DisplayString,
+      	pdu3Status             		INTEGER,
+      	pdu3Controllable       		INTEGER,
+      	pdu3InputPhaseCount		INTEGER,
+	pdu3GroupCount			INTEGER,
+        pdu3OutletCount	 		INTEGER,
+	pdu3MACAddress			DisplayString,
+	pdu3IPv4Address			DisplayString,
+	pdu3IPv6Address			DisplayString    
+    }
+
+pdu3IdentIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the Pdu3IdentEntry table."
+    ::= { pdu3IdentEntry 1 }
+
+pdu3Name OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The string identify the device in daisy chain. Example PDU A."
+    ::= { pdu3IdentEntry 2 }
+
+pdu3Model OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Model."
+    ::= { pdu3IdentEntry 3 }
+
+pdu3Manufacturer OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The Device Manufacturer Name (e.g. Hewlett-Packard)."
+    ::= { pdu3IdentEntry 4 }
+
+pdu3FirmwareVersion OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The firmware revision level of the device."
+    ::= { pdu3IdentEntry 5 }
+
+pdu3FirmwareVersionTimeStamp  OBJECT-TYPE
+	SYNTAX 	DisplayString
+	ACCESS  read-only
+	STATUS 	mandatory
+	DESCRIPTION 
+	   "Timestamp of when the PDU firmware was last updated"
+	::= { pdu3IdentEntry 6 }
+
+pdu3PartNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device part number. Example AF400A."
+    ::= { pdu3IdentEntry 7 }
+
+pdu3SerialNumber OBJECT-TYPE
+    SYNTAX DisplayString (SIZE (0..63))
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"The device serial number, 10- or 16-digit."
+    ::= { pdu3IdentEntry 8 }
+
+pdu3Status OBJECT-TYPE
+    SYNTAX  INTEGER
+    {
+      other(1),    
+      ok(2),		-- default
+      degraded(3),
+      failed(4)
+    }
+    ACCESS	read-only
+    STATUS	mandatory
+    DESCRIPTION
+    "The overall status of the device.  A value of OK(2) indicates the device is operating normally.
+    A value of degraded(3) indicates the device is operating with warning indicators.  A value of
+    failed(4) indicates the device is operating with critical indicators."
+    ::= { pdu3IdentEntry 9 }
+
+pdu3Controllable OBJECT-TYPE
+    SYNTAX  INTEGER 
+    {
+      yes(1),
+      no(2)
+    }
+    ACCESS  read-only
+    STATUS  mandatory
+    DESCRIPTION
+           "This object indicates whether or not the device is controllable."
+    ::= { pdu3IdentEntry 10 }
+
+pdu3InputPhaseCount  OBJECT-TYPE
+    SYNTAX     INTEGER (0..63)
+    ACCESS     read-only
+    STATUS     mandatory
+    DESCRIPTION 
+     	"The number of input phase on this pdu 1,2,3."
+    ::= { pdu3IdentEntry 11 }
+
+pdu3GroupCount  OBJECT-TYPE
+    SYNTAX     INTEGER (0..63)
+    ACCESS     read-only
+    STATUS     mandatory
+    DESCRIPTION 
+	"The number of groups (breakers) on this pdu."
+    ::= { pdu3IdentEntry 12 }
+
+pdu3OutletCount  OBJECT-TYPE
+    SYNTAX     INTEGER (0..63)
+    ACCESS     read-only
+    STATUS     mandatory
+    DESCRIPTION 
+	"The number of outlets in this PDU."
+         ::= { pdu3IdentEntry 13 }
+
+pdu3MACAddress	OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The assigned MAC address for this PDU."
+	::={ pdu3IdentEntry 14 }
+
+pdu3IPv4Address  OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS		read-only
+	STATUS 		mandatory
+	DESCRIPTION
+		"The current IPv4 Address. 
+		A value of 0.0.0.0 indicates an error or an unset option."
+	::={ pdu3IdentEntry 15 }
+
+pdu3IPv6Address  OBJECT-TYPE
+	SYNTAX		DisplayString
+	ACCESS   	read-only
+	STATUS		mandatory
+	DESCRIPTION
+		"The current IPv6 Address.
+		A vale of 0.0.0.0.0.0 indicates an error or an unset option."
+	::={ pdu3IdentEntry 16 }
+
+-- ============ pdu3 Configuration ======= 
+
+pdu3ConfigTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu3ConfigEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to pdu3NumberPDU ."
+    ::= { pdu3Ident 3 }
+	
+pdu3ConfigEntry	OBJECT-TYPE
+	SYNTAX Pdu3ConfigEntry
+	ACCESS not-accessible
+	STATUS mandatory
+	DESCRIPTION	
+		"Read Configuration data from the PDU being queried."
+	INDEX {pdu3ConfigIndex}
+	::=	{pdu3ConfigTable 1}
+	
+Pdu3ConfigEntry	::= SEQUENCE{
+		pdu3ConfigIndex				INTEGER,
+		pdu3ConfigSsh				INTEGER,
+		pdu3ConfigFtps				INTEGER,
+		pdu3ConfigHttp				INTEGER,
+		pdu3ConfigHttps				INTEGER,
+		pdu3ConfigIPv4IPv6Switch		INTEGER,
+		pdu3ConfigRedfishAPI			INTEGER,
+		pdu3ConfigOledDispalyOrientation	INTEGER,
+		pdu3ConfigEnergyReset			INTEGER,
+		pdu3ConfigNetworkManagementCardReset	INTEGER,
+		pdu3ConfigDaisyChainStatus		INTEGER
+		}
+
+pdu3ConfigIndex	OBJECT-TYPE
+		SYNTAX  INTEGER (0..20)
+		ACCESS  read-only
+		STATUS  mandatory
+		DESCRIPTION
+			"The index of PDU configuration entry."
+		::={pdu3ConfigEntry 1}
+
+pdu3ConfigSsh	OBJECT-TYPE
+		SYNTAX	INTEGER{
+			off(0),
+			on(1)
+		}
+		ACCESS  read-only
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to off(0) will disable the SSH conneciton.
+			 Setting this OID to on(1) will enable the SSH connection."
+		::={pdu3ConfigEntry 2}
+		
+pdu3ConfigFtps	OBJECT-TYPE
+		SYNTAX	INTEGER{
+			off(0),
+			on(1)
+		}
+		ACCESS	read-only
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to off(0) will disable the FTPS connection.
+			 Setting this OID to on(1) will enable the FTPS connection."
+		::={pdu3ConfigEntry 3}
+		
+pdu3ConfigHttp	OBJECT-TYPE
+		SYNTAX	INTEGER{
+			off(0),
+			on(1)
+		}
+		ACCESS	read-only
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to off(0) will disable the HTTP connection.
+			 Setting this OID to on(1) will enable the HTTP connection."
+		::={pdu3ConfigEntry 4}
+
+pdu3ConfigHttps	OBJECT-TYPE
+		SYNTAX	INTEGER{
+			off(0),
+			on(1)
+		}
+		ACCESS	read-only
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to off(0) will disable the HTTPS connection.
+			 Setting this OID to on(1) will enable the HTTPS connection."
+		::={pdu3ConfigEntry 5}
+
+pdu3ConfigIPv4IPv6Switch	OBJECT-TYPE
+		SYNTAX	INTEGER{
+			iPv4(1),
+			iPv6(2),
+			iPv4IPv6(3)
+		}
+		ACCESS read-only
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to IPv4(1) will enable the IPv4 configuration.
+			 Setting this OID to IPv6(2) will enable the IPv6 configuration.
+			 Setting this OID to IPv4&IPv6(3) will enable both IPv4 and IPv6 configuration."
+		::={pdu3ConfigEntry 6}		
+		
+pdu3ConfigRedfishAPI OBJECT-TYPE
+		SYNTAX  INTEGER{
+			off(0),
+			on(1)
+		}
+		ACCESS read-write
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to off(0) will disable the Redfish API.
+			 Setting this OID to on(1) will enable the Redfish API."
+		::={pdu3ConfigEntry 7}
+		
+pdu3ConfigOledDispalyOrientation	OBJECT-TYPE
+		SYNTAX INTEGER{
+			displayNormal(1),
+			displayReverse(2)
+		}
+		ACCESS read-write
+		STATUS  mandatory
+		DESCRIPTION
+			"Indicates the intended physical orientation of OLED display.
+			 displayNormal(1) indicates normal orientation.
+			 displayReverse(2) indicates upside down orientation."
+		::={pdu3ConfigEntry 8}
+		
+pdu3ConfigEnergyReset	OBJECT-TYPE
+		SYNTAX INTEGER{
+			noOperation(1),
+			reset(2),
+			notSupported(3)
+		}
+		ACCESS read-write
+		STATUS	mandatory
+		DESCRIPTION
+			"Setting this OID to reset(2) will cause the device energy meter value 
+			 to be reset to zero. Getting this OID in models that support this feature
+			 will do nothing and return the noOperation(1) value. Models that do not
+			 supported this feature will respond to this OID with a value of notSupported(3).
+			 Attempts to set this OID in these models will fail."
+		::={pdu3ConfigEntry 9}
+		
+pdu3ConfigNetworkManagementCardReset  OBJECT-TYPE
+		SYNTAX INTEGER{
+			noOperation(0),
+			reset(1)
+		}
+		ACCESS read-write
+		STATUS mandatory
+		DESCRIPTION
+			"Getting this OID will return noOperation(0).
+			 Getting this OID to reset(1) will reset NMC."
+		::={pdu3ConfigEntry 10} 
+		
+pdu3ConfigDaisyChainStatus	OBJECT-TYPE 
+		SYNTAX INTEGER{
+			daisychain(0)
+		}
+		ACCESS read-write
+		STATUS mandatory
+		DESCRIPTION
+			"Setting this OID to daisychain(0) will enable daisychain mode."
+		::={pdu3ConfigEntry 11}
+		
+
+	
+
+-- ====================================================================================
+--
+--  pdu3                    OBJECT IDENTIFIER       ::= {cpqPower 11}    
+--  pdu3Input               OBJECT IDENTIFIER       ::= { pdu3 2 }
+--  PDU3 input group
+--  OID= .1.3.6.1.4.1.232.165.11.2
+
+pdu3InputTable  OBJECT-TYPE
+	SYNTAX SEQUENCE OF Pdu3InputEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"Aggregate Object with number of entries equal to pdu3NumberPDU ."
+	::= { pdu3Input 1 }
+
+pdu3InputEntry  OBJECT-TYPE
+	SYNTAX 	Pdu3InputEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"The ident table entry containing the VA, Watts, WH, etc."
+	INDEX { pdu3IdentIndex }
+	::= { pdu3InputTable 1 }
+
+Pdu3InputEntry ::= SEQUENCE {
+	pdu3InputType			INTEGER,
+	pdu3InputFrequency		INTEGER,
+	pdu3InputFrequencyStatus	INTEGER,
+	pdu3InputPowerVA		INTEGER,
+	pdu3InputPowerWatts		INTEGER,
+	pdu3InputTotalEnergy		INTEGER,
+	pdu3InputPowerWattHourTimer	DisplayString,
+	pdu3InputResettableEnergy	INTEGER,
+	pdu3InputPowerFactor		INTEGER,
+	pdu3InputPowerVAR		INTEGER
+        }
+
+pdu3InputType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		splitPhase (2),
+		threePhaseDelta (3),
+		threePhaseWye (4)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Type of input - single phase, split phase, three phase delta, or three
+				phase wye."
+	::= { pdu3InputEntry 1 }
+
+pdu3InputFrequency  OBJECT-TYPE
+	SYNTAX     INTEGER (0..2147483647) -- UNITS RMS 0.1 Hz
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"The measured input frequency from the PDU meters in tenths of Hz."
+	::= { pdu3InputEntry 2 }
+
+pdu3InputFrequencyStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		outOfRange (2)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Status of the measured input frequency relative to the nominal frequency and the admitted tolerance."
+	::= { pdu3InputEntry 3 }
+
+pdu3InputPowerVA  OBJECT-TYPE
+	SYNTAX     INTEGER	-- Units in VA
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input VA of all phases.  Units are 0.001 VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputEntry 4 }
+
+pdu3InputPowerWatts  OBJECT-TYPE
+	SYNTAX     INTEGER	-- Units in Watts
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input Watts of all phases.  Units are 0.001 Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputEntry 5 }
+
+pdu3InputTotalEnergy  OBJECT-TYPE
+	SYNTAX     INTEGER	-- Units in kWh
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input Watt-Hour value for all phases.  Units are KWh. This value is accumulated since PDU in service.   
+                 A negative value indicates that this object is not available."
+	::= { pdu3InputEntry 6 }
+
+pdu3InputPowerWattHourTimer  OBJECT-TYPE
+	SYNTAX     DisplayString (SIZE (0..22))  -- display Date Time Since Last Reset
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A Timestamp of when the Total Input WH was last reset."
+	::= { pdu3InputEntry 7 }
+
+pdu3InputResettableEnergy  OBJECT-TYPE
+	SYNTAX     INTEGER	-- Units in kWh
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A total input Watt-Hour value for all phases.  Units are 0.001 Wh. This value can be reset to 0 
+                using GUI. In that case, the pdu3InputPowerWattHourTimer will be reset as well  
+                A negative value indicates that this object is not available."
+	::= { pdu3InputEntry 8 }
+
+pdu3InputPowerFactor  OBJECT-TYPE
+	SYNTAX     INTEGER	-- units 0.01
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An input PF value.  Units are in thousandths, for example a power factor
+		 of 0.958 would be returned as 958, and 0.92 would be returned as 920.  
+                 A negative value indicates that this object is not available."
+	::= { pdu3InputEntry 9 }
+
+pdu3InputPowerVAR  OBJECT-TYPE
+	SYNTAX     INTEGER	-- Units in VAR
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An input VAR value.  Units are 0.001 VAR.  A negative value indicates
+		 that this object is not available."
+	::= { pdu3InputEntry 10 }
+
+-- ==========Input per Phase =============
+
+pdu3InputPhaseTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu3InputPhaseEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION
+           "Aggregate Object with number of entries equal to number of PDUs (pdu3NumberPDU) and
+            number of input phase (pdu3InputPhaseCount)."
+    ::= {pdu3Input 2}
+
+pdu3InputPhaseEntry OBJECT-TYPE
+    SYNTAX Pdu3InputPhaseEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The input table entry containing the voltage, current, frequency, power for each phase.
+            Entries are given with number of pdu and number of input phase 1, 2, or 3."
+    INDEX { pdu3IdentIndex, pdu3InputPhaseIndex }
+    ::= { pdu3InputPhaseTable 1 }
+
+Pdu3InputPhaseEntry ::= SEQUENCE {
+      pdu3InputPhaseIndex      			INTEGER,
+      pdu3InputPhaseVoltageMeasType  		INTEGER,
+      pdu3InputPhaseVoltage    			INTEGER,
+      pdu3InputPhaseVoltageThStatus  		INTEGER,
+      pdu3InputPhaseVoltageThLowerWarning  	INTEGER,
+      pdu3InputPhaseVoltageThLowerCritical  	INTEGER,
+      pdu3InputPhaseVoltageThUpperWarning  	INTEGER,
+      pdu3InputPhaseVoltageThUpperCritical  	INTEGER,
+      pdu3InputPhaseCurrentMeasType		INTEGER,
+      pdu3InputPhaseCurrentRating		INTEGER,
+      pdu3InputPhaseCurrent    			INTEGER,
+      pdu3InputPhaseCurrentThStatus		INTEGER,
+      pdu3InputPhaseCurrentThLowerWarning	INTEGER,
+      pdu3InputPhaseCurrentThLowerCritical	INTEGER,
+      pdu3InputPhaseCurrentThUpperWarning	INTEGER,
+      pdu3InputPhaseCurrentThUpperCritical	INTEGER,
+      pdu3InputPhaseCurrentPercentLoad		INTEGER,
+      pdu3InputPhasePowerMeasType		INTEGER,
+      pdu3InputPhasePowerVA			INTEGER,
+      pdu3InputPhasePowerWatts 			INTEGER,
+      pdu3InputPhasePowerWattHour		INTEGER,
+      pdu3InputPhasePowerWattHourTimer		DisplayString,
+      pdu3InputPhasePowerFactor			INTEGER,
+      pdu3InputPhasePowerVAR			INTEGER
+    }
+
+pdu3InputPhaseIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the Pdu3InputEntry table."
+    ::= { pdu3InputPhaseEntry 1}
+
+pdu3InputPhaseVoltageMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		phase1toN (2),
+		phase2toN (3),
+		phase3toN (4),
+		phase1to2 (5),
+		phase2to3 (6),
+		phase3to1 (7)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Value indicates what input voltage is being measured in this table row - single phase
+		voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2,
+		phase 2 to phase 3, or phase 3 to phase 1."
+	::= { pdu3InputPhaseEntry 2 }
+
+pdu3InputPhaseVoltage OBJECT-TYPE
+    SYNTAX   INTEGER    -- UNITS RMS 0.1 Volts
+    ACCESS   read-only
+    STATUS   mandatory
+    DESCRIPTION
+	"An input voltage measurement value. Return value is divided by 10."
+    ::= {pdu3InputPhaseEntry 3}
+
+pdu3InputPhaseVoltageThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured input voltage relative to the configured thresholds."
+	::= { pdu3InputPhaseEntry 4 }
+
+pdu3InputPhaseVoltageThLowerWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.1 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Return value is divided by 10. A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 5 }
+
+pdu3InputPhaseVoltageThLowerCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.1 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Return value is divided by 10. A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 6 }
+
+pdu3InputPhaseVoltageThUpperWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.1 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Return value is divided by 10. A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 7 }
+
+pdu3InputPhaseVoltageThUpperCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..500000)	-- Units in 0.1 V
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Return value is divided by 10. A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 8 }
+
+pdu3InputPhaseCurrentMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		neutral (2),
+		phase1 (3),
+		phase2 (4),
+		phase3 (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Which input wire is being measured in this table row - single phase, neutral, phase 1,
+		phase 2, or phase 3."
+	::= { pdu3InputPhaseEntry 9 }
+
+pdu3InputPhaseCurrentRating  OBJECT-TYPE
+	SYNTAX   INTEGER		-- Units in 0.01 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Rated current capacity of the input.  A negative value indicates that
+		the hardware current capacity is unknown. Return value is divided by 100."
+	::= { pdu3InputPhaseEntry 10 }
+
+pdu3InputPhaseCurrent  OBJECT-TYPE
+	SYNTAX   INTEGER		-- Units in 0.01 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"An input current measurement value. Return value is divided by 100."
+	::= { pdu3InputPhaseEntry 11 }
+
+pdu3InputPhaseCurrentThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured input current relative to the configured thresholds."
+	::= { pdu3InputPhaseEntry 12 }
+
+pdu3InputPhaseCurrentThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units in 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Return value is divided by 100.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 13 }
+
+pdu3InputPhaseCurrentThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units in 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Return value is divided by 100.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 14 }
+
+pdu3InputPhaseCurrentThUpperWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..100000)		-- Units in 0.01 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper warning threshold. Return value is divided by 100.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 15 }
+
+pdu3InputPhaseCurrentThUpperCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..100000)		-- Units in 0.01 A
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper critical threshold. Return value is divided by 100.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 16 }
+
+pdu3InputPhaseCurrentPercentLoad  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units in 0.1 % 
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current percent load, based on the rated current capacity.  Units are
+                  percentage, for example 80.9 % will be returned as 809.  A negative
+                  value indicates that this object is not available."
+	::= { pdu3InputPhaseEntry 17 }
+
+pdu3InputPhasePowerMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		neutral (2),
+		phase1 (3),
+		phase2 (4),
+		phase3 (5)
+	 }
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Which input wire is being measured in this table row - single phase, neutral, phase 1,
+		phase 2, or phase 3."
+	::= { pdu3InputPhaseEntry 18 }
+
+pdu3InputPhasePowerVA  OBJECT-TYPE
+	SYNTAX    INTEGER		-- Units in VA
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input VA value.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 19 }
+
+pdu3InputPhasePowerWatts  OBJECT-TYPE
+	SYNTAX    INTEGER		-- Units in W
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input Watts value.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 20 }
+
+pdu3InputPhasePowerWattHour  OBJECT-TYPE
+	SYNTAX     INTEGER 		-- Units in kWh for energy
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A kWatt-Hour value for each Input phase.  Units are kWh. This value can be reset to 0 
+                 using GUI. In that case, the pdu3InputPhasePowerWattHourTimer will be reset as well    
+                 A negative value indicates that this object is not available."
+	::= { pdu3InputPhaseEntry 21 }
+
+pdu3InputPhasePowerWattHourTimer  OBJECT-TYPE
+	SYNTAX    DisplayString (SIZE (0..22))  -- display Date Time
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Timestamp of when input phase kWatt-hours (kWh) was last reset."
+	::= { pdu3InputPhaseEntry 22 }
+
+pdu3InputPhasePowerFactor  OBJECT-TYPE
+	SYNTAX    INTEGER		-- units 0.01
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input PF value.  Return value is divided by 100, for example a power factor
+                 of 0.95 would be returned as 95.  A negative value indicates that this object is not available."
+	::= { pdu3InputPhaseEntry 23 }
+
+pdu3InputPhasePowerVAR  OBJECT-TYPE
+	SYNTAX    INTEGER			-- units VAR
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"An input VA Reactive value.  Units are in VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3InputPhaseEntry 24 }
+
+
+
+-- ====================================================================================
+--
+--  pdu3                     OBJECT IDENTIFIER       ::= {cpqPower 11}  
+--  pdu3Group                OBJECT IDENTIFIER       ::= { pdu3 3 }
+--  PDU3 Output groups of outlets (or load segments)
+--  OID= .1.3.6.1.4.1.232.165.11.3
+
+
+pdu3GroupTable OBJECT-TYPE
+    SYNTAX SEQUENCE OF Pdu3GroupEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION "Aggregate Object with number of entries equal to number of PDUs
+                 and number of breakers (pdu3GroupCount)."
+    ::= { pdu3Group 1 }
+
+pdu3GroupEntry OBJECT-TYPE
+    SYNTAX Pdu3GroupEntry
+    ACCESS not-accessible
+    STATUS mandatory
+    DESCRIPTION 
+           "The input table entry containing the name, voltages, currents, power, etc."
+    INDEX { pdu3IdentIndex, pdu3GroupIndex }
+    ::= { pdu3GroupTable 1 }
+
+Pdu3GroupEntry ::= SEQUENCE {
+      pdu3GroupIndex         		INTEGER,
+      pdu3GroupName	     		DisplayString,
+      pdu3GroupType          		INTEGER,
+      pdu3GroupVoltageMeasType		INTEGER,
+      pdu3GroupVoltage          	INTEGER,
+      pdu3GroupVoltageThStatus		INTEGER,
+      pdu3GroupVoltageThLowerWarning	INTEGER,
+      pdu3GroupVoltageThLowerCritical	INTEGER,
+      pdu3GroupVoltageThUpperWarning	INTEGER,
+      pdu3GroupVoltageThUpperCritical	INTEGER,
+      pdu3groupCurrentRating		INTEGER,
+      pdu3GroupCurrent			INTEGER,
+      pdu3GroupCurrentThStatus		INTEGER,
+      pdu3GroupCurrentThLowerWarning	INTEGER,
+      pdu3GroupCurrentThLowerCritical	INTEGER,
+      pdu3GroupCurrentThUpperWarning	INTEGER,
+      pdu3GroupCurrentThUpperCritical	INTEGER,
+      pdu3GroupCurrentPercentLoad	INTEGER,
+      pdu3GroupPowerVA			INTEGER,
+      pdu3GroupPowerWatts		INTEGER,
+      pdu3GroupPowerWattHour		INTEGER,
+      pdu3GroupPowerWattHourTimer	DisplayString,
+      pdu3GroupPowerFactor		INTEGER,
+      pdu3GroupPowerVAR			INTEGER,
+      pdu3GroupOutletCount	 	INTEGER,
+      pdu3GroupBreakerStatus    	INTEGER    
+    }
+
+pdu3GroupIndex OBJECT-TYPE
+    SYNTAX INTEGER	(0..100)
+    ACCESS read-only
+    STATUS mandatory
+    DESCRIPTION
+	"Index for the Pdu3GroupEntry table."
+    ::= { pdu3GroupEntry 1 }
+
+pdu3GroupName  OBJECT-TYPE
+	SYNTAX    DisplayString (SIZE(1..31))
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A descriptive name for the group."
+	::= { pdu3GroupEntry 2 }
+
+pdu3GroupType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		breaker1pole (2),
+		breaker2pole (3),
+		breaker3pole (4),
+		outletSection (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"The type of the group. (5) has no breaker"
+	::= { pdu3GroupEntry 3 }
+
+pdu3GroupVoltageMeasType  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		singlePhase (1),
+		phase1toN (2),
+		phase2toN (3),
+		phase3toN (4),
+		phase1to2 (5),
+		phase2to3 (6),
+		phase3to1 (7)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Value indicates what input voltage is being measured in this table row - single phase
+		voltage, phase 1 to neutral, phase 2 to neutral, phase 3 to neutral, phase 1 to phase 2,
+		phase 2 to phase 3, or phase 3 to phase 1."
+	::= { pdu3GroupEntry 4 }
+
+pdu3GroupVoltage  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.1 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Return value is divided by 10 to get one decimal point, unit is in Volt."
+	::= { pdu3GroupEntry 5 }
+
+pdu3GroupVoltageThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Status of the measured group voltage relative to the configured thresholds."
+	::= { pdu3GroupEntry 6 }
+
+pdu3GroupVoltageThLowerWarning  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..500000)		-- Units 0.1 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Return value is divided by 10 to get one decimal point, 
+                 unit is in Volt.  A negative value indicates that this object is not available."
+	::= { pdu3GroupEntry 7 }
+
+pdu3GroupVoltageThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..500000)		-- Units 0.1 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Return value is divided by 10 to get one decimal point, 
+                 unit is in Volt.  A negative value indicates that this object is not available."
+	::= { pdu3GroupEntry 8 }
+
+pdu3GroupVoltageThUpperWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..500000)		-- Units 0.1 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Return value is divided by 10 to get one decimal point, 
+                 unit is in Volt.  A negative value indicates that this object is not available."
+	::= { pdu3GroupEntry 9 }
+
+pdu3GroupVoltageThUpperCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..500000)		-- Units 0.1 V
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Return value is divided by 10 to get one decimal point, 
+                 unit is in Volt.  A negative value indicates that this object is not available."
+	::= { pdu3GroupEntry 10 }
+
+pdu3groupCurrentRating  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Rated current capacity of the group.  Return value is divided by 100 to get two decimal points, 
+                 unit is in Amps.  A negative value indicates that the hardware current capacity is unknown (it
+		 will always be unknown for custom groups)."
+	::= { pdu3GroupEntry 11 }
+
+pdu3GroupCurrent  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A group current measurement value. Return value is divided by 100 to get two decimal points."
+	::= { pdu3GroupEntry 12 }
+
+pdu3GroupCurrentThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured group current relative to the configured thresholds."
+	::= { pdu3GroupEntry 13 }
+
+pdu3GroupCurrentThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..100000)		-- Units 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Return value is divided by 100 to get two decimal points.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 14 }
+
+pdu3GroupCurrentThLowerCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.01 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Return value is divided by 100 to get two decimal points.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 15 }
+
+pdu3GroupCurrentThUpperWarning  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.01 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Return value is divided by 100 to get two decimal points.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 16 }
+
+pdu3GroupCurrentThUpperCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..100000)		-- Units 0.01 A
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper critical threshold. Return value is divided by 100 to get two decimal points.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 17 }
+
+
+pdu3GroupCurrentPercentLoad  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units 0.1 %
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current percent load, based on the rated current capacity.  Units are
+                  percentage, for example 80.9 % will be returned as 809.  A negative
+                  value indicates that this object is not available."
+	::= { pdu3GroupEntry 18 }
+
+pdu3GroupPowerVA  OBJECT-TYPE
+	SYNTAX     INTEGER  	-- units in VA
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group VA value.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 19 }
+
+pdu3GroupPowerWatts  OBJECT-TYPE
+	SYNTAX     INTEGER	-- units in Watt
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group power value.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 20 }
+
+pdu3GroupPowerWattHour  OBJECT-TYPE
+	SYNTAX     INTEGER 	-- Units in kWh
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An energy consumption value for each load segment.  Units are kWh. This value can be reset to 0 
+                 using GUI. In that case, the pdu3GroupPowerWattHourTimer will be reset as well.    
+                 A negative value indicates that this object is not available."
+	::= { pdu3GroupEntry 21 }
+
+pdu3GroupPowerWattHourTimer  OBJECT-TYPE
+	SYNTAX     DisplayString (SIZE (0..22))		-- display Date and Time stamp
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Timestamp when group kilo Watt-hours (group kWh) is reset."
+	::= { pdu3GroupEntry 22 }
+
+pdu3GroupPowerFactor  OBJECT-TYPE
+	SYNTAX     INTEGER	-- Value is in 0.01							
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A group PF value.  Return value is divided by 100, for example a power factor of 0.95 would be returned as 95.  
+                 A negative value indicates that this object is not available."
+	::= { pdu3GroupEntry 23 }
+
+pdu3GroupPowerVAR  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units in VAR
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A measurement for group/load segment power reactive. Units are VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3GroupEntry 24 }
+
+pdu3GroupOutletCount  OBJECT-TYPE
+    	SYNTAX     INTEGER (0..63)
+    	ACCESS     read-only
+    	STATUS     mandatory
+    	DESCRIPTION 
+		"The number of outlets in each group (breaker)."
+         ::= { pdu3GroupEntry 25 }
+
+pdu3GroupBreakerStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		notApplicable (1),
+		breakerOn (2),
+		breakerOff (3)
+	}
+	ACCESS 	   read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Only applicable to groups with breaker.  Indicates whether a breaker is turned
+		      off or on."
+	::= { pdu3GroupEntry 26 }
+
+-- ====================================================================================
+--
+--  pdu3                     OBJECT IDENTIFIER       ::= {cpqPower 11}  
+--  pdu3Environment          OBJECT IDENTIFIER       ::= { pdu3 4 }
+--  PDU3 Environment group
+--  OID= .1.3.6.1.4.1.232.165.11.4
+
+pdu3EnvProbeTable  OBJECT-TYPE
+	SYNTAX 	SEQUENCE OF Pdu3EnvProbeEntry
+	ACCESS 	not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"A list of environment probe (1 per PDU) for temperature, humidity, and contacts.  
+                 The number of entries is given by number of PDUs in daisy chain."
+	::= { pdu3Environment 1 }
+
+pdu3EnvProbeEntry  OBJECT-TYPE
+	SYNTAX 	Pdu3EnvProbeEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"Aggregate entries equal to number of PDUs."
+	INDEX { pdu3IdentIndex }
+	::= { pdu3EnvProbeTable 1 }
+
+Pdu3EnvProbeEntry ::= SEQUENCE {
+	pdu3TemperatureScale		INTEGER,
+	pdu3TemperatureCount		INTEGER,
+	pdu3HumidityCount		INTEGER,
+	pdu3ContactCount		INTEGER
+}
+
+pdu3TemperatureScale  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		celsius (1),
+		fahrenheit (2)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Scale used to return temperature objects."
+	::= { pdu3EnvProbeEntry 1 }
+
+pdu3TemperatureCount  OBJECT-TYPE
+	SYNTAX  INTEGER
+	ACCESS 	read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Max number of temperature measurements (1 per probe)."
+	::= { pdu3EnvProbeEntry 2  }
+
+pdu3HumidityCount  OBJECT-TYPE
+	SYNTAX  INTEGER
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Max number of humidity measurements  (1 per probe)."
+	::= { pdu3EnvProbeEntry 3 }
+
+pdu3ContactCount  OBJECT-TYPE
+	SYNTAX   INTEGER
+	ACCESS 	 read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Max number of contact sensors  (1 per probe)."
+	::= { pdu3EnvProbeEntry 4 }
+
+-- ========Temperature Measurements ============
+
+pdu3TemperatureTable  OBJECT-TYPE
+	SYNTAX 	SEQUENCE OF Pdu3TemperatureEntry
+	ACCESS 	not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"A list of temperature probe measurements.  The number of entries are
+		 given by number of pdu and pdu3TemperatureCount."
+	::= { pdu3Environment 2 }
+
+pdu3TemperatureEntry  OBJECT-TYPE
+	SYNTAX 	Pdu3TemperatureEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"An entry for a temperature measurement."
+	INDEX { pdu3IdentIndex, pdu3TemperatureIndex }
+	::= { pdu3TemperatureTable 1 }
+
+Pdu3TemperatureEntry ::= SEQUENCE {
+	pdu3TemperatureIndex		INTEGER,
+	pdu3TemperatureName		DisplayString,
+	pdu3TemperatureProbeStatus	INTEGER,
+	pdu3TemperatureValue		INTEGER,
+	pdu3TemperatureThStatus		INTEGER,
+	pdu3TemperatureThLowerWarning	INTEGER,
+	pdu3TemperatureThLowerCritical	INTEGER,
+	pdu3TemperatureThUpperWarning	INTEGER,
+	pdu3TemperatureThUpperCritical	INTEGER
+}
+
+pdu3TemperatureIndex  OBJECT-TYPE
+	SYNTAX   INTEGER (1..2)
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A unique value for each temperature probe measurement.  Its value
+		      ranges from 1 to temperatureCount."
+	::= { pdu3TemperatureEntry 1 }
+
+pdu3TemperatureName  OBJECT-TYPE
+	SYNTAX   DisplayString (SIZE(1..31))
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A descriptive name for the temperature probe."
+	::= { pdu3TemperatureEntry 2 }
+
+pdu3TemperatureProbeStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		disconnected (1),
+		connected (2),
+		bad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Indicates whether a probe is connected or not."
+	::= { pdu3TemperatureEntry 3 }
+
+pdu3TemperatureValue  OBJECT-TYPE
+	SYNTAX    INTEGER  	--0.1 Fahrenheit or Celsius
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Units are in tenths of a degree (either Fahrenheit or Celsius). 
+                 Return value is divided by 10 to get degrees."
+	::= { pdu3TemperatureEntry 4 }
+
+pdu3TemperatureThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured temperature relative to the configured thresholds."
+	::= { pdu3TemperatureEntry 5 }
+
+pdu3TemperatureThLowerWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..150000)  -- 0.1 of a degree
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Return value is divided by 10 to get degree.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3TemperatureEntry 6 }
+
+pdu3TemperatureThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..150000)   -- 0.1 of a degree
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold. Return value is divided by 10 to get degree.  A negative value
+		          indicates that this object is not available."
+	::= { pdu3TemperatureEntry 7 }
+
+pdu3TemperatureThUpperWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..150000)    -- 0.1 of a degree
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper warning threshold. Return value is divided by 10 to get degree.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3TemperatureEntry 8 }
+
+pdu3TemperatureThUpperCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..150000)   -- 0.1 of a degree
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Upper critical threshold. Return value is divided by 10 to get degree.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3TemperatureEntry 9 }
+
+-- ==========Humidity Measurements ==========
+
+pdu3HumidityTable  OBJECT-TYPE
+	SYNTAX   SEQUENCE OF Pdu3HumidityEntry
+	ACCESS   not-accessible
+	STATUS   mandatory
+	DESCRIPTION 
+		"A list of humidity probe measurements.  The number of entries are
+		 given by number of pdu and pdu3HumidityCount."
+	::= { pdu3Environment 3 }
+
+pdu3HumidityEntry  OBJECT-TYPE
+	SYNTAX 	Pdu3HumidityEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"An entry for a humidity measurement."
+	INDEX { pdu3IdentIndex, pdu3HumidityIndex }
+	::= { pdu3HumidityTable 1 }
+
+Pdu3HumidityEntry ::= SEQUENCE {
+	pdu3HumidityIndex		INTEGER,
+	pdu3HumidityName		DisplayString,
+	pdu3HumidityProbeStatus		INTEGER,
+	pdu3HumidityValue		INTEGER,
+	pdu3HumidityThStatus		INTEGER,
+	pdu3HumidityThLowerWarning	INTEGER,
+	pdu3HumidityThLowerCritical	INTEGER,
+	pdu3HumidityThUpperWarning	INTEGER,
+	pdu3HumidityThUpperCritical	INTEGER
+}
+
+pdu3HumidityIndex  OBJECT-TYPE
+	SYNTAX     INTEGER (1..2)
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A unique value for each humidity probe measurement.  Its value
+		 ranges from 1 to pdu3HumidityCount per pdu."
+	::= { pdu3HumidityEntry 1 }
+
+pdu3HumidityName  OBJECT-TYPE
+	SYNTAX   DisplayString (SIZE(1..31))
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A descriptive name for the humidity probe."
+	::= { pdu3HumidityEntry 2 }
+
+pdu3HumidityProbeStatus  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		disconnected (1),
+		connected (2),
+		bad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Indicates whether a probe is connected or not."
+	::= { pdu3HumidityEntry 3 }
+
+pdu3HumidityValue  OBJECT-TYPE
+	SYNTAX    INTEGER   -- 0.1 of %RH
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Units are tenths of a percent relative humidity. Return value is divided by 10 to get %RH."
+	::= { pdu3HumidityEntry 4 }
+
+pdu3HumidityThStatus  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured humidity relative to the configured thresholds."
+	::= { pdu3HumidityEntry 5 }
+
+pdu3HumidityThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..1000)   -- 0.1 of %RH
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold. Return value is divided by 10 to get %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3HumidityEntry 6 }
+
+pdu3HumidityThLowerCritical  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..1000)  -- 0.1 of %RH
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower critical threshold. Return value is divided by 10 to get %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3HumidityEntry 7 }
+
+pdu3HumidityThUpperWarning  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..1000)   -- 0.1 of %RH
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper warning threshold. Return value is divided by 10 to get %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3HumidityEntry 8 }
+
+pdu3HumidityThUpperCritical  OBJECT-TYPE
+	SYNTAX   INTEGER (-1..1000)   -- 0.1 of %RH
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"Upper critical threshold. Return value is divided by 10 to get %RH.  A negative value
+                  indicates that this object is not available."
+	::= { pdu3HumidityEntry 9 }
+
+-- ======Dry Contacts Status==========
+
+pdu3ContactTable  OBJECT-TYPE
+	SYNTAX  SEQUENCE OF Pdu3ContactEntry
+	ACCESS  not-accessible
+	STATUS  mandatory
+	DESCRIPTION 
+		"A list of contact sensors.  The number of entries are
+		 given by number of pdu and pdu3ContactCount."
+	::= { pdu3Environment 4 }
+
+pdu3ContactEntry  OBJECT-TYPE
+	SYNTAX 	 Pdu3ContactEntry
+	ACCESS   not-accessible
+	STATUS   mandatory
+	DESCRIPTION 
+		"An entry for a contact sensor"
+	INDEX { pdu3IdentIndex, pdu3ContactIndex }
+	::= { pdu3ContactTable 1 }
+
+Pdu3ContactEntry ::= SEQUENCE {
+	pdu3ContactIndex	INTEGER,
+	pdu3ContactName		DisplayString,
+	pdu3ContactProbeStatus	INTEGER,
+	pdu3ContactState	INTEGER
+}
+
+pdu3ContactIndex  OBJECT-TYPE
+	SYNTAX   INTEGER (1..3)
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A unique value for each contact sensor.  Its value ranges from 1 to
+		      contactCount."
+	::= { pdu3ContactEntry 1 }
+
+pdu3ContactName  OBJECT-TYPE
+	SYNTAX    DisplayString (SIZE(1..31))
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A descriptive name for the contact sensor."
+	::= { pdu3ContactEntry 2 }
+
+pdu3ContactProbeStatus  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		disconnected (1),
+		connected (2),
+		bad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Indicates whether a probe is connected or not.
+		Will not be returned  if the contact sensor is internal to the ePDU,
+		in that case only contactState should be read."
+	::= { pdu3ContactEntry 3 }
+
+pdu3ContactState  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		contactOpen (1),
+		contactClosed (2),
+		contactBad (3)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"The state of the contact sensor."
+	::= { pdu3ContactEntry 4 }
+
+
+-- ====================================================================================
+--
+--  pdu3                    OBJECT IDENTIFIER       ::= {cpqPower 11}    
+--  pdu3Outlet               OBJECT IDENTIFIER       ::= { pdu3 5 }
+--  PDU3 Outlet group
+--  OID= .1.3.6.1.4.1.232.165.11.5
+
+pdu3OutletTable  OBJECT-TYPE
+	SYNTAX SEQUENCE OF Pdu3OutletEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"Aggregate Object with number of entries equal to Number of PDU (pdu3IdentIndex)
+                 and Number of outlet per PDU (pdu3OutletIndex)."
+	::= { pdu3Outlet 1 }
+
+pdu3OutletEntry  OBJECT-TYPE
+	SYNTAX 	Pdu3OutletEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"The Outlet table entry containing the type, voltage, current etc."
+  INDEX { pdu3IdentIndex, pdu3OutletIndex }
+	::= { pdu3OutletTable 1 }
+
+Pdu3OutletEntry ::= SEQUENCE {
+	pdu3OutletIndex				INTEGER,
+	pdu3OutletName				DisplayString,
+	pdu3OutletType				INTEGER,
+	pdu3OutletCurrentRating			INTEGER,
+	pdu3OutletCurrent			INTEGER,
+	pdu3OutletActivePowerThStatus		INTEGER,
+	pdu3OutletActivePowerThLowerWarning	INTEGER,
+	pdu3OutletActivePowerThLowerCritical	INTEGER,
+	pdu3OutletActivePowerThUpperWarning	INTEGER,
+	pdu3OutletActivePowerThUpperCritical	INTEGER,
+	pdu3OutletCurrentPercentLoad		INTEGER,
+	pdu3OutletVA				INTEGER,
+	pdu3OutletWatts				INTEGER,
+	pdu3OutletWh				INTEGER,
+	pdu3OutletWhTimer			DisplayString,
+	pdu3OutletPowerFactor			INTEGER,
+	pdu3OutletVAR				INTEGER
+}
+
+pdu3OutletIndex OBJECT-TYPE
+    	SYNTAX INTEGER	(0..100)
+    	ACCESS read-only
+    	STATUS mandatory
+    	DESCRIPTION
+		"Index for each outlet, value from 1 to the number of outlets per PDU."
+    	::= { pdu3OutletEntry 1 }
+
+pdu3OutletName  OBJECT-TYPE
+	SYNTAX   DisplayString (SIZE(1..31))
+	ACCESS   read-only
+	STATUS   mandatory
+	DESCRIPTION 
+		"A descriptive name for the outlet."
+	::= { pdu3OutletEntry 2 }
+
+pdu3OutletType  OBJECT-TYPE
+	SYNTAX  INTEGER {
+		iecC13 (1),
+		iecC19 (2),
+		uk (10),
+		french (11),
+		schuko (12),
+		nema515 (20),
+		nema51520 (21),
+		nema520 (22),
+		nemaL520 (23),
+		nemaL530 (24),
+		nema615 (25),
+		nema620 (26),
+		nemaL620 (27),
+		nemaL630 (28),
+		nemaL715 (29),
+		rf203p277 (30)
+	}
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Type of this outlet - C13, C19."
+	::= { pdu3OutletEntry 3 }
+
+pdu3OutletCurrentRating  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Rated current capacity of this outlet. Return value is divided by 100 to get amps.  A negative 
+		 value indicates that the hardware current capacity is unknown."
+	::= { pdu3OutletEntry 4 }
+
+pdu3OutletCurrent  OBJECT-TYPE
+	SYNTAX    INTEGER	-- Units 0.01 A
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"A outlet current measurement value. Return value is divided by 100 to get amps."
+	::= { pdu3OutletEntry 5 }
+
+pdu3OutletActivePowerThStatus  OBJECT-TYPE
+	SYNTAX     INTEGER {
+		good (1),
+		lowWarning (2),
+		lowCritical (3),
+		highWarning (4),
+		highCritical (5)
+	}
+	ACCESS  read-only
+	STATUS  mandatory
+	DESCRIPTION 
+		"Status of the measured outlet active power relative to the configured thresholds."
+	::= { pdu3OutletEntry 6 }
+
+pdu3OutletActivePowerThLowerWarning  OBJECT-TYPE
+	SYNTAX    INTEGER (-1..10000)		-- Units W	
+	ACCESS    read-only
+	STATUS    mandatory
+	DESCRIPTION 
+		"Lower warning threshold.  Units are Watts(W).  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 7 }
+
+pdu3OutletActivePowerThLowerCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..10000)		-- Units W	
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Lower critical threshold.  Units are Watts(W).  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 8 }
+
+pdu3OutletActivePowerThUpperWarning  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..10000)		-- Units W
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper warning threshold.  Units are Watts(W).  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 9 }
+
+pdu3OutletActivePowerThUpperCritical  OBJECT-TYPE
+	SYNTAX     INTEGER (-1..10000)		-- Units W
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Upper critical threshold.  Units are Watts(W).  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 10 }
+
+
+pdu3OutletCurrentPercentLoad  OBJECT-TYPE
+	SYNTAX     INTEGER		-- unit in 0.1 percentage
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Current percent load, based on the rated current capacity.  Units are
+                  percentage, for example 80.5% will be returned as 805.  A negative
+                  value indicates that this object is not available."
+	::= { pdu3OutletEntry 11 }
+
+pdu3OutletVA  OBJECT-TYPE
+	SYNTAX     INTEGER  	-- units in VA
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A outlet power VA value.  Units are VA.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 12 }
+
+pdu3OutletWatts  OBJECT-TYPE
+	SYNTAX     INTEGER	-- units in Watt
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"A outlet power in Watts value.  Units are Watts.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 13 }
+
+pdu3OutletWh  OBJECT-TYPE
+	SYNTAX     INTEGER 	-- Units in kWatt-Hour
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An energy in kWatt-Hour value for each outlet.  Units are kWh.
+		This object is writable so that it can be reset to 0.  When it is
+		written to, the pdu3OutletWhTimer will be reset updated as well    
+      		A negative value indicates that this object is not available."
+	::= { pdu3OutletEntry 14 }
+
+pdu3OutletWhTimer  OBJECT-TYPE
+	SYNTAX     DisplayString (SIZE (0..22))	-- display Date and Time stamp
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"Timestamp (date and time) of outlet energy in kWh is reset."
+	::= { pdu3OutletEntry 15 }
+
+pdu3OutletPowerFactor  OBJECT-TYPE
+	SYNTAX     INTEGER		-- units are in 0.01
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An outlet PF value.  Return value is divided by 100, for example a power factor
+                  of 0.95 would be returned as 95. A negative value indicates that this object is not available."
+	::= { pdu3OutletEntry 16 }
+
+pdu3OutletVAR  OBJECT-TYPE
+	SYNTAX     INTEGER		-- Units in VAR
+	ACCESS     read-only
+	STATUS     mandatory
+	DESCRIPTION 
+		"An outlet power reactive in VAR value.  Units are VAR.  A negative value indicates
+		          that this object is not available."
+	::= { pdu3OutletEntry 17 }
+
+
+
+-- ====================== PDU Outlet Control=====================
+
+pdu3OutletControlTable  OBJECT-TYPE
+	SYNTAX SEQUENCE OF Pdu3OutletControlEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"Aggregate Object with number of entries equal to Number of PDU (pdu3IdentIndex) 
+                 and Number of outlets per PDU (pdu3OutletIndex)."
+	::= { pdu3Outlet 2 }
+
+pdu3OutletControlEntry  OBJECT-TYPE
+	SYNTAX 	Pdu3OutletControlEntry
+	ACCESS     not-accessible
+	STATUS     mandatory
+	DESCRIPTION 
+		"The Outlet table entry containing the type, voltage, current etc."
+  INDEX { pdu3IdentIndex, pdu3OutletIndex }
+	::= { pdu3OutletControlTable 1 }
+
+Pdu3OutletControlEntry ::= SEQUENCE {
+
+	pdu3OutletControlStatus			INTEGER,
+	pdu3OutletControlOffCmd			INTEGER,
+	pdu3OutletControlOnCmd			INTEGER,
+	pdu3OutletControlRebootCmd		INTEGER,
+	pdu3OutletControlPowerOnState		INTEGER,
+	pdu3OutletControlSequenceDelay		INTEGER,
+	pdu3OutletControlRebootOffTime		INTEGER,
+	pdu3OutletControlSwitchable		INTEGER,
+	pdu3OutletControlShutoffDelay		INTEGER
+}
+
+pdu3OutletControlStatus  OBJECT-TYPE
+    	SYNTAX 		INTEGER	{
+			off (1),
+			on (2),
+			pendingOff (3),
+			pendingOn (4)
+			}
+    	ACCESS 		read-only
+    	STATUS 		mandatory
+    	DESCRIPTION
+		"current state of a control outlet."
+    	::= { pdu3OutletControlEntry 1 }
+
+pdu3OutletControlOffCmd  OBJECT-TYPE
+    	SYNTAX 		 INTEGER (-1..99999)		
+    	ACCESS 		 read-write
+    	STATUS 		 mandatory
+    	DESCRIPTION
+		"When write, once issued, the outlet will turn Off immediately.
+                 0-n: Time in seconds until the outlet command is issued
+                 -1: Cancel a pending outlet Off command
+		 When read, returns -1 if no command is pending, or the current downcount in 
+                 seconds of a pending command."
+    	::= { pdu3OutletControlEntry 2 }
+
+pdu3OutletControlOnCmd  OBJECT-TYPE
+    	SYNTAX 		INTEGER (-1..99999)		
+    	ACCESS 		read-write
+    	STATUS 		mandatory
+    	DESCRIPTION
+		"When write, once issued, the outlet will turn On immediately.
+                 0-n: Time in seconds until the outlet command is issued
+                 -1: Cancel a pending outlet On command
+		 When read, returns -1 if no command is pending, or the current downcount in 
+                 seconds of a pending command."
+    	::= { pdu3OutletControlEntry 3 }
+
+pdu3OutletControlRebootCmd  OBJECT-TYPE
+    	SYNTAX 		    INTEGER (-1..99999)		
+    	ACCESS 		    read-write
+    	STATUS 		    mandatory
+    	DESCRIPTION
+		"When write, for outlets that are On prior to this Reboot command, they will 
+                 switch Off immediately when the command is issued, remain Off for 
+                 outletControlRebootOffTime seconds, and then turn back On.
+		 For outlets that are Off prior to the Reboot command, they will turn On after 
+                 a delay of outletControlRebootOffTime seconds from when the command is issued.
+		 0-n : Time in seconds until the Reboot command is issued
+		 -1 : Cancel a pending outlet Reboot command 
+		
+		When read, returns -1 if no command is pending, or the current downcount in 
+                seconds of a pending command."
+    	::= { pdu3OutletControlEntry 4 }
+
+pdu3OutletControlPowerOnState  OBJECT-TYPE
+    	SYNTAX 		    INTEGER {
+		            off (1),
+		            on (2),
+		            lastState (3)
+                            }	
+    	ACCESS 		    read-write
+    	STATUS 		    mandatory
+    	DESCRIPTION
+		"Determines the outlet state when power is applied to the unit.
+		1 : not restart at device startup
+		2 : should sequence back ON in line with outletControlSequenceTime
+		3 : should take the state the outlet had when power was lost.
+		If the state was ON, should sequence back ON in line with outletControlSequenceTime."
+    	::= { pdu3OutletControlEntry 5 }
+
+pdu3OutletControlSequenceDelay  OBJECT-TYPE
+    	SYNTAX 		        INTEGER (-1..99999)		
+    	ACCESS 		        read-write
+    	STATUS 		        mandatory
+    	DESCRIPTION
+		"Time delay in seconds from when a Global Sequence On command is issued to
+		when the command is executed on this outlet.  This delay is also used as a power-on
+		delay. Set to -1 to exclude this outlet from Global Sequence On commands."
+    	::= { pdu3OutletControlEntry 6 }
+
+pdu3OutletControlRebootOffTime  OBJECT-TYPE
+    	SYNTAX 		        INTEGER (-1..99999)		
+    	ACCESS 		        read-write
+    	STATUS 		        mandatory
+    	DESCRIPTION
+		"Time delay in seconds that the outlet should remain in the Off state when executing a Reboot command."
+    	::= { pdu3OutletControlEntry 7 }
+
+pdu3OutletControlSwitchable  OBJECT-TYPE
+    	SYNTAX 		    INTEGER {
+		            switchable (1),
+		            notSwitchable (2)
+                            }	
+    	ACCESS 		    read-write
+    	STATUS 		    mandatory
+    	DESCRIPTION
+		"Determines the outlet capability to be controlled On/Off from the communication channels.
+		1 : control On/Off enabled
+		2 : control On/Off disabled."
+    	::= { pdu3OutletControlEntry 8 }
+
+pdu3OutletControlShutoffDelay  OBJECT-TYPE
+    	SYNTAX 		        INTEGER (-1..99999)		
+    	ACCESS 		        read-write
+    	STATUS 		        mandatory
+    	DESCRIPTION
+		"Time delay in seconds that could be taken in account before shutting of the outlet.
+    An application which need to shutoff properly an outlet will read this parameter first
+    then write it to the command pdu3OutletControlOffCmd."
+    	::= { pdu3OutletControlEntry 9 }
+
+
+
+-- =======================
+-- Device Traps
+-- =======================
+trapCritical TRAP-TYPE
+	ENTERPRISE cpqPower
+	VARIABLES  { sysName, 
+	             trapCode, 
+	             trapDescription, 
+	             trapDeviceName,
+	             trapDeviceDetails, 
+	             trapDeviceMgmtUrl }
+	DESCRIPTION
+        "A critical alarm has occurred. Action: Check the Trap Details for more information."
+    --#TYPE      "Critical Alarm"
+    --#SEVERITY  CRITICAL
+    --#CATEGORY  "PowerDevice"
+    --#SIMPLE_SEVERITY CRITICAL
+    --#HWSTATUS_CATEGORY POWER
+    --#SUMMARY " %s from %s %s "
+    --#ARGUMENTS {2, 3, 0}
+    
+    -- PDU Critical Alarm trap text:          Description:
+	--		Voltage High Critical				The PDU has detected an input line voltage that is more than 20% ABOVE the expected voltage		
+	--		Voltage Low Critical				The PDU has detected a very low input line voltage more than 20% BELOW the expected voltage, or the breaker may have tripped. 
+	--		Load Critical					The rated capacity of the breaker has been exceeded. There is a high risk of tripping the breaker
+	--		Current Critical				Current has exceeded the breaker rating level. The addition of any new load could overload or trip the breaker
+	--		Total Power Critical				The rated capacity of the PDU has been exceeded. There is a risk of tripping the branch circuit protection
+	--		Total Heat Critical				The heat created by the load attached to this PDU has exceeded the set threshold
+	--		Total Load Critical				The rated capacity of the PDU has been exceeded. There is a risk of tripping the branch circuit protection
+	
+	--		Breaker Critical				A breaker is off.
+	--		Fan Critical					A fan has failed. There are not enough fans to be able to maintain operating temperature.
+	--		Temperature Out of Range			PDU operating temperature is out of range.
+    -- UPS Critical Alarm trap text:          Description:
+    	--		Agent(s) Not Connected				Loss communication with remote shutdown agent(s)
+	--		Battery Failure					ABM reports Battery failure		
+	--		Battery Low					Battery has reached its Low battery threshold
+	--		EPO Initiated					A Remote Emergency-Power-Off initiated to shutdown UPS immediately.
+	--		Fan Failure					The UPS's Fan Failure detected
+	--		Internal Failure				An internal UPS circuit problem is detected
+	--		Loss of Redundant Communication			Remote Agent lost communicating with one of the redudant UPSes 
+	--		Manual Load Dumped				UPS is switched off manually bys user
+	--		Overload					UPS is overloaded
+	--		Temperature Out of Range			UPS operating temperature is out of range
+	--		Charger Fault					Battery Charger is failure (Offline UPS only)
+	--		DC Bus High/Low					DC Bus voltage is out of range (Offline UPS only)
+	--		DC AUX Power Fault				DC AUX Power circuit is failure (Offline UPS only)
+	--		AC AUX Power Fault				AC AUX Power circuit is failure (Offline UPS only)
+	--		Output Fault					Output Circuit is failure (Offline UPS only)
+	--		DC-DC Fault					DC-to-DC is failure	(Offline UPS only)			
+	--		Output Short					Output circuit is shorted (Offline UPS only)
+	--		Shutdown Imminent				Battery is on too low capacity, UPS is shutdown soon (Offline UPS only)
+	--		Utility Failure					Utility Power is lost (Offline UPS only)
+	--		BP Missing					Missing Battery Pack (Offline UPS only)
+	--		DB Missing					Missing IO Distribution Box (Offline UPS only)
+	--		No Battery					Battery not detected (Offline UPS only)	
+	
+	-- iPDU Critical Alarm trap text:         Description:
+	--		Voltage High 					The voltage for the iPDU is above the warning or critical limit
+	--		Voltage Low 					The voltage for the iPDU is below the warning or critical limit
+	--		Total PDU Load 					The total load of the iPDU is above the warning or critical limit
+	--		Phase Load 					The phase load is above the warning or critical limit
+	--		Load Segment Current 				The current for the circuit breaker is above the warning or critical limit
+	--		Managed Ext. Bar Communication 			An Intelligent Extension Bar can no longer communicate with the iPDU
+	--		Display Communication				The Display Module can no longer communicate with the iPDU
+	--		Redundant Communication				The iPDU cannot communicate with the redundant PDU or there is a redundancy configuration error
+	--		Remote PDU IP Mismatch				The redundant PDU is already configured for redundancy with another PDU
+	--		Remote Outlet Control Disabled			The redundant PDU outlet control settings are disabled and will therefore not allow redundant management control of its outlets
+	--		PDU Communication				The Primary iPDU cannot communicate with the Secondary iPDU 
+        ::= 1
+
+trapWarning TRAP-TYPE
+	ENTERPRISE cpqPower
+	VARIABLES  { sysName, 
+	             trapCode, 
+	             trapDescription, 
+	             trapDeviceName,
+	             trapDeviceDetails, 
+	             trapDeviceMgmtUrl }
+	DESCRIPTION
+        "A warning alarm has occurred. Action: Check the Trap Details for more information."
+    --#TYPE      "Warning Alarm"
+    --#SEVERITY  MINOR
+    --#CATEGORY  "PowerDevice"
+    --#SIMPLE_SEVERITY MAJOR
+    --#HWSTATUS_CATEGORY POWER
+    --#SUMMARY " %s from %s %s "
+    --#ARGUMENTS {2, 3, 0}
+
+  	-- PDU Warning Alarm trap text            Description:
+	--		Voltage High Warning				The PDU has detected an input line voltage that is more than 10% ABOVE the expected voltage
+	--		Voltage Low Warning				The PDU has detected an input line voltage that is more than 10% BELOW the expected voltage
+	--		Load Warning					Load has reached the rating level for this breaker, the addition of any new load could overload or trip the breaker
+	--		Current Warning					Current has reached the rating level for this breaker, the addition of any new load could overload or trip the breaker
+	--		Total Power Warning				The rated capacity for PDU has reached rating level. There is a risk of tripping the branch circuit protection
+	--		Total Heat Warning				The heat created by the load attached to this PDU has reached a threshold
+	--		Total Load Warning				The rated capacity for PDU has reached the rating level. There is a risk of tripping the branch circuit protection
+	--		PDU Communication Lost				Connection between the daisy-chained PDUs is lost.
+	--		Fan Warning					A fan has failed. Redundant fans may be able to maintain operating temperature.
+  	-- UPS Warning Alarm trap text            Description:
+  	--		Battery Discharged				The UPS Batteries are completely discharged
+	--		Battery Disconnected				The batteries are not conntected to the UPS
+	--		Bypass On Auto					The UPS is operating on automatic Bypass
+	--		Bypass Not Available				The UPS Bypass is not available due to a Battery test or internal failure
+	--		Input Out of Range				Input voltage is over or under the operating ranges
+	--		Loss of Redundant Power				One of the redundant UPS is switched off
+	--		On Battery					The UPS is operating on-Battery
+	--		Shutdown Pending				The UPS is about to shutdown soon
+	--		Site Wiring Fault				There is a fault in the input wiring other than Phase Rotation
+	--		Input Frequency NOK				Input Frequency is out of range (Offline UPS only)
+	
+	
+  	-- iPDU Warning Alarm trap text            Description:
+	--		Topology Discovery				An outlet device on an Intelligent Extension Bar can no longer communicate with the iPDU
+	--		Remote PDU Model Mismatch			The two PDUs configured for redundancy management are different PDU models
+	::= 2
+
+trapInformation TRAP-TYPE
+	ENTERPRISE cpqPower
+	VARIABLES  { sysName, 
+	             trapCode, 
+	             trapDescription, 
+	             trapDeviceName,
+	             trapDeviceDetails, 
+	             trapDeviceMgmtUrl }
+	DESCRIPTION
+        "An informational alarm has occurred. Action: Check the Trap Details for more information."
+    --#TYPE      "Information Alarm"
+    --#SEVERITY  INFORMATIONAL
+    --#CATEGORY  "PowerDevice"
+    --#SIMPLE_SEVERITY OK
+    --#HWSTATUS_CATEGORY POWER
+    --#SUMMARY " %s from %s %s "
+    --#ARGUMENTS {2, 3, 0}
+
+ 	-- PDU Informational Alarm trap text          Description:
+	--		(none)						(none)
+	
+  	-- UPS Informational Alarm trap text          Description:
+	--		On Boost					Input voltage low, UPS is boosting to keep output voltage at normal level
+	--		On Buck						Input voltage is high, UPS is reducing to keep output voltage at normal level
+	--		UPS Started On Battery				UPS started on battery, there is no utility input.
+ 	--		ACC Active					Active Current Correction mode is active (Offline UPS only)
+ 	
+ 	-- iPDU Information Alarm trap text            Description:
+	--		Managed Ext. Bar Connected			iPDU detects an Extension Bar connected		
+	--		Managed Ext. Bar Disconnected			iPDU detects an Extension Bar disconnected		
+	--		Display Connected				iPDU detects the Display Module connected		
+	--		Display Disconnected				iPDU detects the Display Module disconnected		
+	--		Discovery Capable Device Connected		iPDU detects an IPD capable device was connected
+	--		Discovery Capable Device Disconnected		iPDU detects an IPD capable device was disconnected
+	--		Secondary PDU Connected				The first iDPU detects the second iPDU connected
+	--		Secondary PDU Disconnected			The first iPDU detects the second iPDU disconnected
+	::= 3
+
+trapCleared TRAP-TYPE
+	ENTERPRISE cpqPower
+	VARIABLES  { sysName, 
+	             trapCode, 
+	             trapDescription, 
+	             trapDeviceName,
+	             trapDeviceDetails, 
+	             trapDeviceMgmtUrl }
+	DESCRIPTION
+        "An alarm has cleared. Action: Check the Trap Details for more information."
+    --#TYPE      "Cleared Alarm"
+    --#SEVERITY  INFORMATIONAL
+    --#CATEGORY  "PowerDevice"
+    --#SIMPLE_SEVERITY OK
+    --#HWSTATUS_CATEGORY POWER
+    --#SUMMARY " %s from %s %s "
+    --#ARGUMENTS {2, 3, 0}
+    ::= 4
+
+trapTest TRAP-TYPE
+        ENTERPRISE cpqPower
+        VARIABLES  { sysName, 
+                     trapCode,
+		     trapDescription,
+		     trapDeviceName,
+                     trapDeviceDetails, 
+                     trapDeviceMgmtUrl } 
+        DESCRIPTION
+        "Test trap sent to a trap receiver to check proper reception of traps"
+    --#TYPE         "Test Trap"
+    --#SEVERITY     INFORMATIONAL
+    --#CATEGORY     "PowerDevice"
+    --#SIMPLE_SEVERITY OK
+    --#HWSTATUS_CATEGORY POWER
+    --#SUMMARY " %s from %s %s "
+    --#ARGUMENTS {2, 3, 0}    
+        ::= 5
+
+deviceTrapInitialization TRAP-TYPE
+	ENTERPRISE cpqPower
+	VARIABLES   { sysName, deviceIdentName }
+	DESCRIPTION
+		"This trap is sent each time a power device is initialized."
+    --#TYPE      "Device Initialization"
+    --#SEVERITY  INFORMATIONAL
+    --#CATEGORY  "PowerDevice"	
+	::= 6
+
+
+END
diff --git a/tests/data/hpe-pdumm.json b/tests/data/hpe-pdumm.json
new file mode 100644
index 0000000000..81f6445c60
--- /dev/null
+++ b/tests/data/hpe-pdumm.json
@@ -0,0 +1,1515 @@
+{
+    "os": {
+        "discovery": {
+            "devices": [
+                {
+                    "sysName": "<private>",
+                    "sysObjectID": null,
+                    "sysDescr": "HP PDU Management Module, revision 1.00.A, firmware version 1.00.16",
+                    "sysContact": null,
+                    "version": null,
+                    "hardware": null,
+                    "features": null,
+                    "os": "hpe-pdumm",
+                    "type": "power",
+                    "serial": null,
+                    "icon": "hpe.svg",
+                    "location": null
+                }
+            ]
+        },
+        "poller": {
+            "devices": [
+                {
+                    "sysName": "<private>",
+                    "sysObjectID": null,
+                    "sysDescr": "HP PDU Management Module, revision 1.00.A, firmware version 1.00.16",
+                    "sysContact": "<private>",
+                    "version": "1.00.16",
+                    "hardware": null,
+                    "features": null,
+                    "os": "hpe-pdumm",
+                    "type": "power",
+                    "serial": null,
+                    "icon": "hpe.svg",
+                    "location": "<private>"
+                }
+            ]
+        }
+    },
+    "ports": {
+        "discovery": {
+            "ports": [
+                {
+                    "port_descr_type": null,
+                    "port_descr_descr": null,
+                    "port_descr_circuit": null,
+                    "port_descr_speed": null,
+                    "port_descr_notes": null,
+                    "ifDescr": "lo",
+                    "ifName": "lo",
+                    "portName": null,
+                    "ifIndex": 1,
+                    "ifSpeed": null,
+                    "ifConnectorPresent": null,
+                    "ifPromiscuousMode": null,
+                    "ifHighSpeed": null,
+                    "ifOperStatus": null,
+                    "ifOperStatus_prev": null,
+                    "ifAdminStatus": null,
+                    "ifAdminStatus_prev": null,
+                    "ifDuplex": null,
+                    "ifMtu": null,
+                    "ifType": "other",
+                    "ifAlias": "lo",
+                    "ifPhysAddress": null,
+                    "ifHardType": null,
+                    "ifLastChange": 0,
+                    "ifVlan": "",
+                    "ifTrunk": null,
+                    "counter_in": null,
+                    "counter_out": null,
+                    "ignore": 0,
+                    "disabled": 0,
+                    "detailed": 0,
+                    "deleted": 0,
+                    "pagpOperationMode": null,
+                    "pagpPortState": null,
+                    "pagpPartnerDeviceId": null,
+                    "pagpPartnerLearnMethod": null,
+                    "pagpPartnerIfIndex": null,
+                    "pagpPartnerGroupIfIndex": null,
+                    "pagpPartnerDeviceName": null,
+                    "pagpEthcOperationMode": null,
+                    "pagpDeviceId": null,
+                    "pagpGroupIfIndex": null,
+                    "ifInUcastPkts": null,
+                    "ifInUcastPkts_prev": null,
+                    "ifInUcastPkts_delta": null,
+                    "ifInUcastPkts_rate": null,
+                    "ifOutUcastPkts": null,
+                    "ifOutUcastPkts_prev": null,
+                    "ifOutUcastPkts_delta": null,
+                    "ifOutUcastPkts_rate": null,
+                    "ifInErrors": null,
+                    "ifInErrors_prev": null,
+                    "ifInErrors_delta": null,
+                    "ifInErrors_rate": null,
+                    "ifOutErrors": null,
+                    "ifOutErrors_prev": null,
+                    "ifOutErrors_delta": null,
+                    "ifOutErrors_rate": null,
+                    "ifInOctets": null,
+                    "ifInOctets_prev": null,
+                    "ifInOctets_delta": null,
+                    "ifInOctets_rate": null,
+                    "ifOutOctets": null,
+                    "ifOutOctets_prev": null,
+                    "ifOutOctets_delta": null,
+                    "ifOutOctets_rate": null,
+                    "poll_prev": null,
+                    "ifInNUcastPkts": null,
+                    "ifInNUcastPkts_prev": null,
+                    "ifInNUcastPkts_delta": null,
+                    "ifInNUcastPkts_rate": null,
+                    "ifOutNUcastPkts": null,
+                    "ifOutNUcastPkts_prev": null,
+                    "ifOutNUcastPkts_delta": null,
+                    "ifOutNUcastPkts_rate": null,
+                    "ifInDiscards": null,
+                    "ifInDiscards_prev": null,
+                    "ifInDiscards_delta": null,
+                    "ifInDiscards_rate": null,
+                    "ifOutDiscards": null,
+                    "ifOutDiscards_prev": null,
+                    "ifOutDiscards_delta": null,
+                    "ifOutDiscards_rate": null,
+                    "ifInUnknownProtos": null,
+                    "ifInUnknownProtos_prev": null,
+                    "ifInUnknownProtos_delta": null,
+                    "ifInUnknownProtos_rate": null,
+                    "ifInBroadcastPkts": null,
+                    "ifInBroadcastPkts_prev": null,
+                    "ifInBroadcastPkts_delta": null,
+                    "ifInBroadcastPkts_rate": null,
+                    "ifOutBroadcastPkts": null,
+                    "ifOutBroadcastPkts_prev": null,
+                    "ifOutBroadcastPkts_delta": null,
+                    "ifOutBroadcastPkts_rate": null,
+                    "ifInMulticastPkts": null,
+                    "ifInMulticastPkts_prev": null,
+                    "ifInMulticastPkts_delta": null,
+                    "ifInMulticastPkts_rate": null,
+                    "ifOutMulticastPkts": null,
+                    "ifOutMulticastPkts_prev": null,
+                    "ifOutMulticastPkts_delta": null,
+                    "ifOutMulticastPkts_rate": null
+                },
+                {
+                    "port_descr_type": null,
+                    "port_descr_descr": null,
+                    "port_descr_circuit": null,
+                    "port_descr_speed": null,
+                    "port_descr_notes": null,
+                    "ifDescr": "eth0",
+                    "ifName": "eth0",
+                    "portName": null,
+                    "ifIndex": 2,
+                    "ifSpeed": null,
+                    "ifConnectorPresent": null,
+                    "ifPromiscuousMode": null,
+                    "ifHighSpeed": null,
+                    "ifOperStatus": null,
+                    "ifOperStatus_prev": null,
+                    "ifAdminStatus": null,
+                    "ifAdminStatus_prev": null,
+                    "ifDuplex": null,
+                    "ifMtu": null,
+                    "ifType": "iso88023Csmacd",
+                    "ifAlias": "eth0",
+                    "ifPhysAddress": null,
+                    "ifHardType": null,
+                    "ifLastChange": 0,
+                    "ifVlan": "",
+                    "ifTrunk": null,
+                    "counter_in": null,
+                    "counter_out": null,
+                    "ignore": 0,
+                    "disabled": 0,
+                    "detailed": 0,
+                    "deleted": 0,
+                    "pagpOperationMode": null,
+                    "pagpPortState": null,
+                    "pagpPartnerDeviceId": null,
+                    "pagpPartnerLearnMethod": null,
+                    "pagpPartnerIfIndex": null,
+                    "pagpPartnerGroupIfIndex": null,
+                    "pagpPartnerDeviceName": null,
+                    "pagpEthcOperationMode": null,
+                    "pagpDeviceId": null,
+                    "pagpGroupIfIndex": null,
+                    "ifInUcastPkts": null,
+                    "ifInUcastPkts_prev": null,
+                    "ifInUcastPkts_delta": null,
+                    "ifInUcastPkts_rate": null,
+                    "ifOutUcastPkts": null,
+                    "ifOutUcastPkts_prev": null,
+                    "ifOutUcastPkts_delta": null,
+                    "ifOutUcastPkts_rate": null,
+                    "ifInErrors": null,
+                    "ifInErrors_prev": null,
+                    "ifInErrors_delta": null,
+                    "ifInErrors_rate": null,
+                    "ifOutErrors": null,
+                    "ifOutErrors_prev": null,
+                    "ifOutErrors_delta": null,
+                    "ifOutErrors_rate": null,
+                    "ifInOctets": null,
+                    "ifInOctets_prev": null,
+                    "ifInOctets_delta": null,
+                    "ifInOctets_rate": null,
+                    "ifOutOctets": null,
+                    "ifOutOctets_prev": null,
+                    "ifOutOctets_delta": null,
+                    "ifOutOctets_rate": null,
+                    "poll_prev": null,
+                    "ifInNUcastPkts": null,
+                    "ifInNUcastPkts_prev": null,
+                    "ifInNUcastPkts_delta": null,
+                    "ifInNUcastPkts_rate": null,
+                    "ifOutNUcastPkts": null,
+                    "ifOutNUcastPkts_prev": null,
+                    "ifOutNUcastPkts_delta": null,
+                    "ifOutNUcastPkts_rate": null,
+                    "ifInDiscards": null,
+                    "ifInDiscards_prev": null,
+                    "ifInDiscards_delta": null,
+                    "ifInDiscards_rate": null,
+                    "ifOutDiscards": null,
+                    "ifOutDiscards_prev": null,
+                    "ifOutDiscards_delta": null,
+                    "ifOutDiscards_rate": null,
+                    "ifInUnknownProtos": null,
+                    "ifInUnknownProtos_prev": null,
+                    "ifInUnknownProtos_delta": null,
+                    "ifInUnknownProtos_rate": null,
+                    "ifInBroadcastPkts": null,
+                    "ifInBroadcastPkts_prev": null,
+                    "ifInBroadcastPkts_delta": null,
+                    "ifInBroadcastPkts_rate": null,
+                    "ifOutBroadcastPkts": null,
+                    "ifOutBroadcastPkts_prev": null,
+                    "ifOutBroadcastPkts_delta": null,
+                    "ifOutBroadcastPkts_rate": null,
+                    "ifInMulticastPkts": null,
+                    "ifInMulticastPkts_prev": null,
+                    "ifInMulticastPkts_delta": null,
+                    "ifInMulticastPkts_rate": null,
+                    "ifOutMulticastPkts": null,
+                    "ifOutMulticastPkts_prev": null,
+                    "ifOutMulticastPkts_delta": null,
+                    "ifOutMulticastPkts_rate": null
+                }
+            ]
+        },
+        "poller": {
+            "ports": [
+                {
+                    "port_descr_type": null,
+                    "port_descr_descr": null,
+                    "port_descr_circuit": null,
+                    "port_descr_speed": null,
+                    "port_descr_notes": null,
+                    "ifDescr": "lo",
+                    "ifName": "lo",
+                    "portName": null,
+                    "ifIndex": 1,
+                    "ifSpeed": 0,
+                    "ifConnectorPresent": null,
+                    "ifPromiscuousMode": null,
+                    "ifHighSpeed": null,
+                    "ifOperStatus": "up",
+                    "ifOperStatus_prev": null,
+                    "ifAdminStatus": "up",
+                    "ifAdminStatus_prev": null,
+                    "ifDuplex": null,
+                    "ifMtu": 1500,
+                    "ifType": "other",
+                    "ifAlias": "lo",
+                    "ifPhysAddress": "0",
+                    "ifHardType": null,
+                    "ifLastChange": 0,
+                    "ifVlan": "",
+                    "ifTrunk": null,
+                    "counter_in": null,
+                    "counter_out": null,
+                    "ignore": 0,
+                    "disabled": 0,
+                    "detailed": 0,
+                    "deleted": 0,
+                    "pagpOperationMode": null,
+                    "pagpPortState": null,
+                    "pagpPartnerDeviceId": null,
+                    "pagpPartnerLearnMethod": null,
+                    "pagpPartnerIfIndex": null,
+                    "pagpPartnerGroupIfIndex": null,
+                    "pagpPartnerDeviceName": null,
+                    "pagpEthcOperationMode": null,
+                    "pagpDeviceId": null,
+                    "pagpGroupIfIndex": null,
+                    "ifInUcastPkts": 0,
+                    "ifInUcastPkts_prev": 0,
+                    "ifInUcastPkts_delta": null,
+                    "ifInUcastPkts_rate": null,
+                    "ifOutUcastPkts": 0,
+                    "ifOutUcastPkts_prev": 0,
+                    "ifOutUcastPkts_delta": null,
+                    "ifOutUcastPkts_rate": null,
+                    "ifInErrors": 0,
+                    "ifInErrors_prev": 0,
+                    "ifInErrors_delta": null,
+                    "ifInErrors_rate": null,
+                    "ifOutErrors": 0,
+                    "ifOutErrors_prev": 0,
+                    "ifOutErrors_delta": null,
+                    "ifOutErrors_rate": null,
+                    "ifInOctets": 0,
+                    "ifInOctets_prev": 0,
+                    "ifInOctets_delta": null,
+                    "ifInOctets_rate": null,
+                    "ifOutOctets": 0,
+                    "ifOutOctets_prev": 0,
+                    "ifOutOctets_delta": null,
+                    "ifOutOctets_rate": null,
+                    "poll_prev": null,
+                    "ifInNUcastPkts": 0,
+                    "ifInNUcastPkts_prev": 0,
+                    "ifInNUcastPkts_delta": null,
+                    "ifInNUcastPkts_rate": null,
+                    "ifOutNUcastPkts": 0,
+                    "ifOutNUcastPkts_prev": 0,
+                    "ifOutNUcastPkts_delta": null,
+                    "ifOutNUcastPkts_rate": null,
+                    "ifInDiscards": 0,
+                    "ifInDiscards_prev": 0,
+                    "ifInDiscards_delta": null,
+                    "ifInDiscards_rate": null,
+                    "ifOutDiscards": 0,
+                    "ifOutDiscards_prev": 0,
+                    "ifOutDiscards_delta": null,
+                    "ifOutDiscards_rate": null,
+                    "ifInUnknownProtos": 0,
+                    "ifInUnknownProtos_prev": 0,
+                    "ifInUnknownProtos_delta": null,
+                    "ifInUnknownProtos_rate": null,
+                    "ifInBroadcastPkts": 0,
+                    "ifInBroadcastPkts_prev": 0,
+                    "ifInBroadcastPkts_delta": null,
+                    "ifInBroadcastPkts_rate": null,
+                    "ifOutBroadcastPkts": 0,
+                    "ifOutBroadcastPkts_prev": 0,
+                    "ifOutBroadcastPkts_delta": null,
+                    "ifOutBroadcastPkts_rate": null,
+                    "ifInMulticastPkts": 0,
+                    "ifInMulticastPkts_prev": 0,
+                    "ifInMulticastPkts_delta": null,
+                    "ifInMulticastPkts_rate": null,
+                    "ifOutMulticastPkts": 0,
+                    "ifOutMulticastPkts_prev": 0,
+                    "ifOutMulticastPkts_delta": null,
+                    "ifOutMulticastPkts_rate": null
+                },
+                {
+                    "port_descr_type": null,
+                    "port_descr_descr": null,
+                    "port_descr_circuit": null,
+                    "port_descr_speed": null,
+                    "port_descr_notes": null,
+                    "ifDescr": "eth0",
+                    "ifName": "eth0",
+                    "portName": null,
+                    "ifIndex": 2,
+                    "ifSpeed": 100000000,
+                    "ifConnectorPresent": null,
+                    "ifPromiscuousMode": null,
+                    "ifHighSpeed": null,
+                    "ifOperStatus": "up",
+                    "ifOperStatus_prev": null,
+                    "ifAdminStatus": "up",
+                    "ifAdminStatus_prev": null,
+                    "ifDuplex": null,
+                    "ifMtu": 1500,
+                    "ifType": "iso88023Csmacd",
+                    "ifAlias": "eth0",
+                    "ifPhysAddress": "28924a34d97f",
+                    "ifHardType": null,
+                    "ifLastChange": 0,
+                    "ifVlan": "",
+                    "ifTrunk": null,
+                    "counter_in": null,
+                    "counter_out": null,
+                    "ignore": 0,
+                    "disabled": 0,
+                    "detailed": 0,
+                    "deleted": 0,
+                    "pagpOperationMode": null,
+                    "pagpPortState": null,
+                    "pagpPartnerDeviceId": null,
+                    "pagpPartnerLearnMethod": null,
+                    "pagpPartnerIfIndex": null,
+                    "pagpPartnerGroupIfIndex": null,
+                    "pagpPartnerDeviceName": null,
+                    "pagpEthcOperationMode": null,
+                    "pagpDeviceId": null,
+                    "pagpGroupIfIndex": null,
+                    "ifInUcastPkts": 3746772,
+                    "ifInUcastPkts_prev": 0,
+                    "ifInUcastPkts_delta": null,
+                    "ifInUcastPkts_rate": null,
+                    "ifOutUcastPkts": 3746406,
+                    "ifOutUcastPkts_prev": 0,
+                    "ifOutUcastPkts_delta": null,
+                    "ifOutUcastPkts_rate": null,
+                    "ifInErrors": 2501354,
+                    "ifInErrors_prev": 0,
+                    "ifInErrors_delta": null,
+                    "ifInErrors_rate": null,
+                    "ifOutErrors": 0,
+                    "ifOutErrors_prev": 0,
+                    "ifOutErrors_delta": null,
+                    "ifOutErrors_rate": null,
+                    "ifInOctets": 954244879,
+                    "ifInOctets_prev": 0,
+                    "ifInOctets_delta": null,
+                    "ifInOctets_rate": null,
+                    "ifOutOctets": 655737823,
+                    "ifOutOctets_prev": 0,
+                    "ifOutOctets_delta": null,
+                    "ifOutOctets_rate": null,
+                    "poll_prev": null,
+                    "ifInNUcastPkts": 3574116,
+                    "ifInNUcastPkts_prev": 0,
+                    "ifInNUcastPkts_delta": null,
+                    "ifInNUcastPkts_rate": null,
+                    "ifOutNUcastPkts": 10269,
+                    "ifOutNUcastPkts_prev": 0,
+                    "ifOutNUcastPkts_delta": null,
+                    "ifOutNUcastPkts_rate": null,
+                    "ifInDiscards": 0,
+                    "ifInDiscards_prev": 0,
+                    "ifInDiscards_delta": null,
+                    "ifInDiscards_rate": null,
+                    "ifOutDiscards": 0,
+                    "ifOutDiscards_prev": 0,
+                    "ifOutDiscards_delta": null,
+                    "ifOutDiscards_rate": null,
+                    "ifInUnknownProtos": 1,
+                    "ifInUnknownProtos_prev": 0,
+                    "ifInUnknownProtos_delta": null,
+                    "ifInUnknownProtos_rate": null,
+                    "ifInBroadcastPkts": 0,
+                    "ifInBroadcastPkts_prev": 0,
+                    "ifInBroadcastPkts_delta": null,
+                    "ifInBroadcastPkts_rate": null,
+                    "ifOutBroadcastPkts": 0,
+                    "ifOutBroadcastPkts_prev": 0,
+                    "ifOutBroadcastPkts_delta": null,
+                    "ifOutBroadcastPkts_rate": null,
+                    "ifInMulticastPkts": 0,
+                    "ifInMulticastPkts_prev": 0,
+                    "ifInMulticastPkts_delta": null,
+                    "ifInMulticastPkts_rate": null,
+                    "ifOutMulticastPkts": 0,
+                    "ifOutMulticastPkts_prev": 0,
+                    "ifOutMulticastPkts_delta": null,
+                    "ifOutMulticastPkts_rate": null
+                }
+            ]
+        }
+    },
+    "sensors": {
+        "discovery": {
+            "sensors": [
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.1.1",
+                    "sensor_index": "breakerCurrent.1.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 3,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.1.2",
+                    "sensor_index": "breakerCurrent.1.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 3,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.1.3",
+                    "sensor_index": "breakerCurrent.1.3",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 3",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 2,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.1.4",
+                    "sensor_index": "breakerCurrent.1.4",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 4",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.1.5",
+                    "sensor_index": "breakerCurrent.1.5",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 5",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.1.6",
+                    "sensor_index": "breakerCurrent.1.6",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 6",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.2.1",
+                    "sensor_index": "breakerCurrent.2.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 3,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.2.2",
+                    "sensor_index": "breakerCurrent.2.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 2,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.2.3",
+                    "sensor_index": "breakerCurrent.2.3",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 3",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 1,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.2.4",
+                    "sensor_index": "breakerCurrent.2.4",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 4",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.2.5",
+                    "sensor_index": "breakerCurrent.2.5",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 5",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "current",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.3.2.6",
+                    "sensor_index": "breakerCurrent.2.6",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 6",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.1.1",
+                    "sensor_index": "breakerPercentLoad.1.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 20,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.1.2",
+                    "sensor_index": "breakerPercentLoad.1.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 21,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.1.3",
+                    "sensor_index": "breakerPercentLoad.1.3",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 3",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 12,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.1.4",
+                    "sensor_index": "breakerPercentLoad.1.4",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 4",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.1.5",
+                    "sensor_index": "breakerPercentLoad.1.5",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 5",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.1.6",
+                    "sensor_index": "breakerPercentLoad.1.6",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 6",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.2.1",
+                    "sensor_index": "breakerPercentLoad.2.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 18,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.2.2",
+                    "sensor_index": "breakerPercentLoad.2.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 15,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.2.3",
+                    "sensor_index": "breakerPercentLoad.2.3",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 3",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 11,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.2.4",
+                    "sensor_index": "breakerPercentLoad.2.4",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 4",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.2.5",
+                    "sensor_index": "breakerPercentLoad.2.5",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 5",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.4.2.6",
+                    "sensor_index": "breakerPercentLoad.2.6",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 6",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.1.1.2.1",
+                    "sensor_index": "pduOutputLoad.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 15,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "load",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.1.1.2.2",
+                    "sensor_index": "pduOutputLoad.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 10,
+                    "sensor_limit": 80,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "power",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.1.1.4.1",
+                    "sensor_index": "pduOutputPower.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 1587,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "power",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.1.1.4.2",
+                    "sensor_index": "pduOutputPower.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 1137,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "state",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.1.2.1.8.1",
+                    "sensor_index": "1",
+                    "sensor_type": "pduIdentTable",
+                    "sensor_descr": "PDU 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 2,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": "pduIdentTable"
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "state",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.1.2.1.8.2",
+                    "sensor_index": "2",
+                    "sensor_type": "pduIdentTable",
+                    "sensor_descr": "PDU 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 2,
+                    "sensor_limit": null,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": null,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": "pduIdentTable"
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.1.1",
+                    "sensor_index": "breakerVoltage.1.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 231,
+                    "sensor_limit": 265.65,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 196.35,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.1.2",
+                    "sensor_index": "breakerVoltage.1.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 232,
+                    "sensor_limit": 266.8,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 197.2,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.1.3",
+                    "sensor_index": "breakerVoltage.1.3",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 3",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 231,
+                    "sensor_limit": 265.65,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 196.35,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.1.4",
+                    "sensor_index": "breakerVoltage.1.4",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 4",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 0,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 0,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.1.5",
+                    "sensor_index": "breakerVoltage.1.5",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 5",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 0,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 0,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.1.6",
+                    "sensor_index": "breakerVoltage.1.6",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 1 Phase 6",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 0,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 0,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.2.1",
+                    "sensor_index": "breakerVoltage.2.1",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 1",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 233,
+                    "sensor_limit": 267.95,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 198.05,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.2.2",
+                    "sensor_index": "breakerVoltage.2.2",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 2",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 235,
+                    "sensor_limit": 270.25,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 199.75,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.2.3",
+                    "sensor_index": "breakerVoltage.2.3",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 3",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 231,
+                    "sensor_limit": 265.65,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 196.35,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.2.4",
+                    "sensor_index": "breakerVoltage.2.4",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 4",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 0,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 0,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.2.5",
+                    "sensor_index": "breakerVoltage.2.5",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 5",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 0,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 0,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                },
+                {
+                    "sensor_deleted": 0,
+                    "sensor_class": "voltage",
+                    "poller_type": "snmp",
+                    "sensor_oid": ".1.3.6.1.4.1.232.165.2.3.2.1.2.2.6",
+                    "sensor_index": "breakerVoltage.2.6",
+                    "sensor_type": "hpe-pdumm",
+                    "sensor_descr": "PDU 2 Phase 6",
+                    "group": null,
+                    "sensor_divisor": 1,
+                    "sensor_multiplier": 1,
+                    "sensor_current": 0,
+                    "sensor_limit": 0,
+                    "sensor_limit_warn": null,
+                    "sensor_limit_low": 0,
+                    "sensor_limit_low_warn": null,
+                    "sensor_alert": 1,
+                    "sensor_custom": "No",
+                    "entPhysicalIndex": null,
+                    "entPhysicalIndex_measured": null,
+                    "sensor_prev": null,
+                    "user_func": null,
+                    "state_name": null
+                }
+            ],
+            "state_indexes": [
+                {
+                    "state_name": "pduIdentTable",
+                    "state_descr": "other",
+                    "state_draw_graph": 0,
+                    "state_value": 1,
+                    "state_generic_value": 3
+                },
+                {
+                    "state_name": "pduIdentTable",
+                    "state_descr": "ok",
+                    "state_draw_graph": 0,
+                    "state_value": 2,
+                    "state_generic_value": 0
+                },
+                {
+                    "state_name": "pduIdentTable",
+                    "state_descr": "degraded",
+                    "state_draw_graph": 0,
+                    "state_value": 3,
+                    "state_generic_value": 1
+                },
+                {
+                    "state_name": "pduIdentTable",
+                    "state_descr": "failed",
+                    "state_draw_graph": 0,
+                    "state_value": 4,
+                    "state_generic_value": 2
+                }
+            ]
+        },
+        "poller": "matches discovery"
+    }
+}
diff --git a/tests/snmpsim/hpe-pdumm.snmprec b/tests/snmpsim/hpe-pdumm.snmprec
new file mode 100644
index 0000000000..747261229d
--- /dev/null
+++ b/tests/snmpsim/hpe-pdumm.snmprec
@@ -0,0 +1,228 @@
+1.3.6.1.2.1.1.1.0|4|HP PDU Management Module, revision 1.00.A, firmware version 1.00.16
+1.3.6.1.2.1.1.3.0|67|291928910
+1.3.6.1.2.1.1.4.0|4|<private>
+1.3.6.1.2.1.1.5.0|4|<private>
+1.3.6.1.2.1.1.6.0|4|<private>
+1.3.6.1.2.1.2.2.1.1.1|2|1
+1.3.6.1.2.1.2.2.1.1.2|2|2
+1.3.6.1.2.1.2.2.1.2.1|4|lo
+1.3.6.1.2.1.2.2.1.2.2|4|eth0
+1.3.6.1.2.1.2.2.1.3.1|2|1
+1.3.6.1.2.1.2.2.1.3.2|2|7
+1.3.6.1.2.1.2.2.1.4.1|2|1500
+1.3.6.1.2.1.2.2.1.4.2|2|1500
+1.3.6.1.2.1.2.2.1.5.1|66|0
+1.3.6.1.2.1.2.2.1.5.2|66|100000000
+1.3.6.1.2.1.2.2.1.6.1|4x|00
+1.3.6.1.2.1.2.2.1.6.2|4x|28924A34D97F
+1.3.6.1.2.1.2.2.1.7.1|2|1
+1.3.6.1.2.1.2.2.1.7.2|2|1
+1.3.6.1.2.1.2.2.1.8.1|2|1
+1.3.6.1.2.1.2.2.1.8.2|2|1
+1.3.6.1.2.1.2.2.1.9.1|67|0
+1.3.6.1.2.1.2.2.1.9.2|67|0
+1.3.6.1.2.1.2.2.1.10.1|65|0
+1.3.6.1.2.1.2.2.1.10.2|65|954244879
+1.3.6.1.2.1.2.2.1.11.1|65|0
+1.3.6.1.2.1.2.2.1.11.2|65|3746772
+1.3.6.1.2.1.2.2.1.12.1|65|0
+1.3.6.1.2.1.2.2.1.12.2|65|3574116
+1.3.6.1.2.1.2.2.1.13.1|65|0
+1.3.6.1.2.1.2.2.1.13.2|65|0
+1.3.6.1.2.1.2.2.1.14.1|65|0
+1.3.6.1.2.1.2.2.1.14.2|65|2501354
+1.3.6.1.2.1.2.2.1.15.1|65|0
+1.3.6.1.2.1.2.2.1.15.2|65|1
+1.3.6.1.2.1.2.2.1.16.1|65|0
+1.3.6.1.2.1.2.2.1.16.2|65|655737823
+1.3.6.1.2.1.2.2.1.17.1|65|0
+1.3.6.1.2.1.2.2.1.17.2|65|3746406
+1.3.6.1.2.1.2.2.1.18.1|65|0
+1.3.6.1.2.1.2.2.1.18.2|65|10269
+1.3.6.1.2.1.2.2.1.19.1|65|0
+1.3.6.1.2.1.2.2.1.19.2|65|0
+1.3.6.1.2.1.2.2.1.20.1|65|0
+1.3.6.1.2.1.2.2.1.20.2|65|0
+1.3.6.1.2.1.2.2.1.21.1|66|0
+1.3.6.1.2.1.2.2.1.21.2|66|0
+1.3.6.1.2.1.2.2.1.22.1|6|0.0
+1.3.6.1.2.1.2.2.1.22.2|6|0.0
+1.3.6.1.2.1.4.3.0|65|3679652
+1.3.6.1.2.1.4.4.0|65|0
+1.3.6.1.2.1.4.5.0|65|0
+1.3.6.1.2.1.4.6.0|65|0
+1.3.6.1.2.1.4.7.0|65|0
+1.3.6.1.2.1.4.8.0|65|0
+1.3.6.1.2.1.4.9.0|65|3679651
+1.3.6.1.2.1.4.10.0|65|3649979
+1.3.6.1.2.1.4.11.0|65|0
+1.3.6.1.2.1.4.12.0|65|0
+1.3.6.1.2.1.4.14.0|65|0
+1.3.6.1.2.1.4.15.0|65|0
+1.3.6.1.2.1.4.16.0|65|0
+1.3.6.1.2.1.4.17.0|65|0
+1.3.6.1.2.1.4.18.0|65|0
+1.3.6.1.2.1.4.19.0|65|0
+1.3.6.1.2.1.4.20.1.2.10.10.101.239|2|2
+1.3.6.1.2.1.4.20.1.2.127.0.0.1|2|1
+1.3.6.1.2.1.4.20.1.3.10.10.101.239|64|255.255.255.0
+1.3.6.1.2.1.4.20.1.3.127.0.0.1|64|255.0.0.0
+1.3.6.1.2.1.5.1.0|65|288218
+1.3.6.1.2.1.5.2.0|65|0
+1.3.6.1.2.1.5.3.0|65|5
+1.3.6.1.2.1.5.4.0|65|0
+1.3.6.1.2.1.5.5.0|65|0
+1.3.6.1.2.1.5.6.0|65|0
+1.3.6.1.2.1.5.7.0|65|0
+1.3.6.1.2.1.5.8.0|65|288213
+1.3.6.1.2.1.5.9.0|65|0
+1.3.6.1.2.1.5.10.0|65|0
+1.3.6.1.2.1.5.11.0|65|0
+1.3.6.1.2.1.5.12.0|65|0
+1.3.6.1.2.1.5.13.0|65|0
+1.3.6.1.2.1.5.14.0|65|288213
+1.3.6.1.2.1.5.15.0|65|0
+1.3.6.1.2.1.5.16.0|65|0
+1.3.6.1.2.1.5.17.0|65|0
+1.3.6.1.2.1.5.18.0|65|0
+1.3.6.1.2.1.5.19.0|65|0
+1.3.6.1.2.1.5.20.0|65|0
+1.3.6.1.2.1.5.21.0|65|0
+1.3.6.1.2.1.5.22.0|65|288213
+1.3.6.1.2.1.5.23.0|65|0
+1.3.6.1.2.1.5.24.0|65|0
+1.3.6.1.2.1.5.25.0|65|0
+1.3.6.1.2.1.5.26.0|65|0
+1.3.6.1.2.1.6.5.0|65|0
+1.3.6.1.2.1.6.6.0|65|15
+1.3.6.1.2.1.6.7.0|65|0
+1.3.6.1.2.1.6.8.0|65|0
+1.3.6.1.2.1.6.9.0|66|4
+1.3.6.1.2.1.6.10.0|65|138
+1.3.6.1.2.1.6.11.0|65|125
+1.3.6.1.2.1.6.12.0|65|0
+1.3.6.1.2.1.6.14.0|65|0
+1.3.6.1.2.1.6.15.0|65|2
+1.3.6.1.2.1.7.1.0|65|3391327
+1.3.6.1.2.1.7.2.0|65|29643
+1.3.6.1.2.1.7.3.0|65|0
+1.3.6.1.2.1.7.4.0|65|3361672
+1.3.6.1.2.1.11.1.0|65|3361335
+1.3.6.1.2.1.11.2.0|65|3361319
+1.3.6.1.2.1.11.3.0|65|6
+1.3.6.1.2.1.11.4.0|65|9
+1.3.6.1.2.1.11.5.0|65|9
+1.3.6.1.2.1.11.6.0|65|0
+1.3.6.1.2.1.11.8.0|65|0
+1.3.6.1.2.1.11.9.0|65|0
+1.3.6.1.2.1.11.10.0|65|0
+1.3.6.1.2.1.11.11.0|65|0
+1.3.6.1.2.1.11.12.0|65|0
+1.3.6.1.2.1.11.13.0|65|22169200
+1.3.6.1.2.1.11.14.0|65|0
+1.3.6.1.2.1.11.15.0|65|1398644
+1.3.6.1.2.1.11.16.0|65|210003
+1.3.6.1.2.1.11.17.0|65|0
+1.3.6.1.2.1.11.18.0|65|0
+1.3.6.1.2.1.11.19.0|65|0
+1.3.6.1.2.1.11.20.0|65|0
+1.3.6.1.2.1.11.21.0|65|2441084
+1.3.6.1.2.1.11.22.0|65|0
+1.3.6.1.2.1.11.24.0|65|0
+1.3.6.1.2.1.11.25.0|65|0
+1.3.6.1.2.1.11.26.0|65|0
+1.3.6.1.2.1.11.27.0|65|0
+1.3.6.1.2.1.11.28.0|65|3361321
+1.3.6.1.2.1.11.29.0|65|0
+1.3.6.1.2.1.11.30.0|2|1
+1.3.6.1.2.1.11.31.0|65|0
+1.3.6.1.2.1.11.32.0|65|0
+1.3.6.1.4.1.232.2.2.4.2.0|4|
+1.3.6.1.4.1.232.165.2.1.2.1.1.1|2|0
+1.3.6.1.4.1.232.165.2.1.2.1.1.2|2|1
+1.3.6.1.4.1.232.165.2.1.2.1.2.1|4|
+1.3.6.1.4.1.232.165.2.1.2.1.2.2|4|
+1.3.6.1.4.1.232.165.2.1.2.1.3.1|4|
+1.3.6.1.4.1.232.165.2.1.2.1.3.2|4|
+1.3.6.1.4.1.232.165.2.1.2.1.4.1|4|
+1.3.6.1.4.1.232.165.2.1.2.1.4.2|4|
+1.3.6.1.4.1.232.165.2.1.2.1.5.1|4|
+1.3.6.1.4.1.232.165.2.1.2.1.5.2|4|
+1.3.6.1.4.1.232.165.2.1.2.1.6.1|4|
+1.3.6.1.4.1.232.165.2.1.2.1.6.2|4|
+1.3.6.1.4.1.232.165.2.1.2.1.7.1|4|
+1.3.6.1.4.1.232.165.2.1.2.1.7.2|4|
+1.3.6.1.4.1.232.165.2.1.2.1.8.1|2|2
+1.3.6.1.4.1.232.165.2.1.2.1.8.2|2|2
+1.3.6.1.4.1.232.165.2.1.2.1.9.1|2|2
+1.3.6.1.4.1.232.165.2.1.2.1.9.2|2|2
+1.3.6.1.4.1.232.165.2.3.1.1.1.1|2|0
+1.3.6.1.4.1.232.165.2.3.1.1.1.2|2|1
+1.3.6.1.4.1.232.165.2.3.1.1.2.1|2|15
+1.3.6.1.4.1.232.165.2.3.1.1.2.2|2|10
+1.3.6.1.4.1.232.165.2.3.1.1.3.1|2|5409
+1.3.6.1.4.1.232.165.2.3.1.1.3.2|2|3887
+1.3.6.1.4.1.232.165.2.3.1.1.4.1|2|1587
+1.3.6.1.4.1.232.165.2.3.1.1.4.2|2|1137
+1.3.6.1.4.1.232.165.2.3.1.1.5.1|2|3
+1.3.6.1.4.1.232.165.2.3.1.1.5.2|2|3
+1.3.6.1.4.1.232.165.2.3.2.1.1.1.1|2|1
+1.3.6.1.4.1.232.165.2.3.2.1.1.1.2|2|2
+1.3.6.1.4.1.232.165.2.3.2.1.1.1.3|2|3
+1.3.6.1.4.1.232.165.2.3.2.1.1.1.4|2|4
+1.3.6.1.4.1.232.165.2.3.2.1.1.1.5|2|5
+1.3.6.1.4.1.232.165.2.3.2.1.1.1.6|2|6
+1.3.6.1.4.1.232.165.2.3.2.1.1.2.1|2|1
+1.3.6.1.4.1.232.165.2.3.2.1.1.2.2|2|2
+1.3.6.1.4.1.232.165.2.3.2.1.1.2.3|2|3
+1.3.6.1.4.1.232.165.2.3.2.1.1.2.4|2|4
+1.3.6.1.4.1.232.165.2.3.2.1.1.2.5|2|5
+1.3.6.1.4.1.232.165.2.3.2.1.1.2.6|2|6
+1.3.6.1.4.1.232.165.2.3.2.1.2.1.1|2|231
+1.3.6.1.4.1.232.165.2.3.2.1.2.1.2|2|232
+1.3.6.1.4.1.232.165.2.3.2.1.2.1.3|2|231
+1.3.6.1.4.1.232.165.2.3.2.1.2.1.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.2.1.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.2.1.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.2.2.1|2|233
+1.3.6.1.4.1.232.165.2.3.2.1.2.2.2|2|235
+1.3.6.1.4.1.232.165.2.3.2.1.2.2.3|2|231
+1.3.6.1.4.1.232.165.2.3.2.1.2.2.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.2.2.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.2.2.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.3.1.1|2|3
+1.3.6.1.4.1.232.165.2.3.2.1.3.1.2|2|3
+1.3.6.1.4.1.232.165.2.3.2.1.3.1.3|2|2
+1.3.6.1.4.1.232.165.2.3.2.1.3.1.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.3.1.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.3.1.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.3.2.1|2|3
+1.3.6.1.4.1.232.165.2.3.2.1.3.2.2|2|2
+1.3.6.1.4.1.232.165.2.3.2.1.3.2.3|2|1
+1.3.6.1.4.1.232.165.2.3.2.1.3.2.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.3.2.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.3.2.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.4.1.1|2|20
+1.3.6.1.4.1.232.165.2.3.2.1.4.1.2|2|21
+1.3.6.1.4.1.232.165.2.3.2.1.4.1.3|2|12
+1.3.6.1.4.1.232.165.2.3.2.1.4.1.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.4.1.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.4.1.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.4.2.1|2|18
+1.3.6.1.4.1.232.165.2.3.2.1.4.2.2|2|15
+1.3.6.1.4.1.232.165.2.3.2.1.4.2.3|2|11
+1.3.6.1.4.1.232.165.2.3.2.1.4.2.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.4.2.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.4.2.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.1.1|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.1.2|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.1.3|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.1.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.1.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.1.6|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.2.1|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.2.2|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.2.3|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.2.4|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.2.5|2|0
+1.3.6.1.4.1.232.165.2.3.2.1.5.2.6|2|0