coreboot-mirror
/
hpcorebootfe80
mirror of https://code.fe80.eu/microserver/coreboot.git
1
0
Fork 0
Code Issues Releases Wiki Activity

mainboard/asus/kfsn4-dre_k8: Fix broken dual CPU package support 

The existing KFSN4-DRE support hung during ramstage while initializing
AP #3 if a second CPU package was installed.  After analyzing the
Sun Ultra 40 M2 support code it became apparent that the K8 code
cannot function correctly if sequential RAM training is disabled,
and that there were a few other missing calls.  This patch adds
the missing calls, adjust the CAR space to an appropriate level, and
explicitly defines the link numbers and connections in devicetree.cb

TEST: Booted ASUS KFSN4-DRE with 2x Opteron 8222 installed.

Change-Id: I96178b7367b0c13de5c9d5d90d032fb0c53639c2
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/12285
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Tested-by: build bot (Jenkins)
This commit is contained in:
Timothy Pearson 2015-10-31 15:00:23 -05:00 committed by Patrick Georgi
parent ab355750fc
commit 74b13a5616
4 changed files with 35 additions and 24 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
src/mainboard/asus/kfsn4-dre_k8/Kconfig
View File

@ -9,6 +9,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
select NORTHBRIDGE_AMD_AMDK8
select SOUTHBRIDGE_NVIDIA_CK804
select SUPERIO_WINBOND_W83627THG
select PARALLEL_CPU_INIT
select HAVE_HARD_RESET
select HAVE_OPTION_TABLE
select HAVE_CMOS_DEFAULT
@ -35,15 +36,15 @@ config BOOTBLOCK_MAINBOARD_INIT
config DCACHE_RAM_BASE
hex
default 0xcf000
default 0xc8000
config DCACHE_RAM_SIZE
hex
default 0x01000
default 0x08000
config APIC_ID_OFFSET
hex
default 0
default 0x10
config MAINBOARD_PART_NUMBER
string
@ -63,7 +64,7 @@ config MAX_PHYSICAL_CPUS
config MEM_TRAIN_SEQ
int
default 0
default 1
config HT_CHAIN_UNITID_BASE
hex

5
src/mainboard/asus/kfsn4-dre_k8/devicetree.cb
View File

@ -180,11 +180,14 @@ chip northbridge/amd/amdk8/root_complex # Root complex
register "sata1_enable" = "1"
end
end
device pci 18.0 on end # Link 2 == LDT 2
device pci 18.1 on end
device pci 18.2 on end
device pci 18.3 on end
device pci 18.4 on end
device pci 19.0 on end
device pci 19.0 on end # Link 0 == LDT 0
device pci 19.0 on end # Link 1 == LDT 1
device pci 19.0 on end # Link 2 == LDT 2
device pci 19.1 on end
device pci 19.2 on end
device pci 19.3 on end

6
src/mainboard/asus/kfsn4-dre_k8/get_bus_conf.c
View File

@ -44,9 +44,9 @@ unsigned apicid_ck804;
/* Here you only need to set value in pci1234 for HT-IO that could be
installed or not You may need to preset pci1234 for HTIO board, please
refer to src/northbridge/amd/amdfam10/get_pci1234.c for detail */
refer to src/northbridge/amd/amdk8/get_pci1234.c for detail */
static u32 pci1234x[] = {
0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc, 0x0000ffc,
0x0000ff0, 0x0000ff0, 0x0000ff0,
};
@ -54,7 +54,7 @@ static u32 pci1234x[] = {
in chain, assume every chain only have 4 ht device at most */
static unsigned hcdnx[] = {
0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020, 0x20202020,
0x20202020, 0x20202020, 0x20202020,
};
static unsigned get_bus_conf_done = 0;

39
src/mainboard/asus/kfsn4-dre_k8/romstage.c
View File

@ -66,6 +66,7 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include <spd.h>
#include "cpu/amd/model_fxx/init_cpus.c"
#include "cpu/amd/model_fxx/fidvid.c"
#include "northbridge/amd/amdk8/early_ht.c"
#define CK804_MB_SETUP \
RES_PORT_IO_8, SYSCTRL_IO_BASE + 0xc0+33, ~(0x0f),(0x04 | 0x01), /* -ENOINFO Proprietary BIOS sets this register; "When in Rome..."*/
@ -199,7 +200,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
struct sys_info *sysinfo = &sysinfo_car;
u32 bsp_apicid = 0, val, wants_reset, needs_reset;
uint32_t bsp_apicid = 0;
uint32_t dword;
uint8_t needs_reset = 0;
#if IS_ENABLED(CONFIG_SET_FIDVID)
struct cpuid_result cpuid1;
#endif
@ -207,8 +210,12 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
timestamp_init(timestamp_get());
timestamp_add_now(TS_START_ROMSTAGE);
if (!cpu_init_detectedx && boot_cpu())
if (!cpu_init_detectedx && boot_cpu()) {
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
sio_setup();
}
post_code(0x30);
@ -226,8 +233,8 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
val = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", val);
dword = cpuid_eax(1);
printk(BIOS_DEBUG, "BSP Family_Model: %08x\n", dword);
printk(BIOS_DEBUG, "*sysinfo range: [%p,%p]\n",sysinfo,sysinfo+1);
printk(BIOS_DEBUG, "bsp_apicid = %02x\n", bsp_apicid);
printk(BIOS_DEBUG, "cpu_init_detectedx = %08lx\n", cpu_init_detectedx);
@ -240,19 +247,21 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
setup_coherent_ht_domain();
post_code(0x35);
/* Setup any mainboard PCI settings etc. */
setup_mb_resource_map();
post_code(0x36);
/* Wait for all base cores to start */
wait_all_core0_started();
post_code(0x36);
/* Setup any mainboard PCI settings etc. */
setup_mb_resource_map();
post_code(0x37);
if (IS_ENABLED(CONFIG_LOGICAL_CPUS)) {
/* Core0 on each node is configured. Now setup any additional cores. */
printk(BIOS_DEBUG, "start_other_cores()\n");
start_other_cores();
post_code(0x37);
post_code(0x38);
wait_all_other_cores_started(bsp_apicid);
post_code(0x39);
}
ht_setup_chains_x(sysinfo);
@ -280,18 +289,19 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
}
#endif
init_timer(); /* Need to use TMICT to synchronize FID/VID. */
printk(BIOS_DEBUG, "set_ck804_base_unit_id()\n");
ck804_control(ctrl_conf_fix_pci_numbering, ARRAY_SIZE(ctrl_conf_fix_pci_numbering), CK804_BOARD_BOOT_BASE_UNIT_UID);
post_code(0x38);
printk(BIOS_DEBUG, "ck804_early_setup_x()\n");
wants_reset = ck804_early_setup_x();
post_code(0x3a);
printk(BIOS_DEBUG, "optimize_link_coherent_ht()\n");
needs_reset = optimize_link_coherent_ht();
printk(BIOS_DEBUG, "optimize_link_incoherent_ht()\n");
needs_reset |= optimize_link_incoherent_ht(sysinfo);
printk(BIOS_DEBUG, "ck804_early_setup_x()\n");
needs_reset |= ck804_early_setup_x();
/* FIDVID change will issue one LDTSTOP and the HT change will be effective too */
if (needs_reset) {
@ -299,9 +309,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
soft_reset();
}
if (wants_reset)
printk(BIOS_DEBUG, "ck804_early_setup_x wanted additional reset!\n");
post_code(0x3b);
allow_all_aps_stop(bsp_apicid);