You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

250 lines
9.1 KiB

# SPDX-License-Identifier: GPL-2.0-only
# ccache integration
ifeq ($(CONFIG_CCACHE),y)
CCACHE:=$(word 1,$(wildcard $(addsuffix /ccache,$(subst :, ,$(PATH)))))
ifeq ($(CCACHE),)
$(error ccache selected, but not found in PATH)
export CCACHE_BASEDIR=$(top)
$(foreach arch,$(ARCH_SUPPORTED), \
$(eval CC_$(arch):=$(CCACHE) $(CC_$(arch))))
# scan-build integration
export CCC_ANALYZER_ANALYSIS := -analyzer-opt-analyze-headers
$(foreach arch,$(ARCH_SUPPORTED), \
$(eval CC_$(arch):=CCC_CC="$(CC_$(arch))" $(CC) ))
COREBOOT_STANDARD_STAGES := decompressor bootblock verstage romstage ramstage
MAP-decompressor := bootblock
ARCHDIR-i386 := x86
ARCHDIR-x86_32 := x86
ARCHDIR-x86_64 := x86
ARCHDIR-arm := arm
ARCHDIR-arm64 := arm64
ARCHDIR-riscv := riscv
ARCHDIR-ppc64 := ppc64
CFLAGS_arm +=
CFLAGS_arm64 += -mgeneral-regs-only
CFLAGS_riscv +=
CFLAGS_x86_32 +=
CFLAGS_x86_64 += -mcmodel=large -mno-red-zone
CFLAGS_ppc64 +=
# Some boards only provide 2K stacks, so storing lots of data there leads to
# problems. Since C rules don't allow us to statically determine the maximum
# stack use, we use 1.5K as heuristic, assuming that we typically have lots
# of tiny stack frames and the odd large one.
# Store larger buffers in BSS, use static to share data in cache-as-ram
# on x86.
# Since GCCs detection of dynamic array bounds unfortunately seems to be
# very basic, you'll sometimes have to use a static upper bound for the
# size and an assert() to make sure it's honored (see gpio_base3_value()
# for an example).
# (If you absolutely need a larger stack frame and are 100% sure it cannot
# cause problems, you can whitelist it with #pragma diagnostic.)
CFLAGS_arm += -Wstack-usage=1536
CFLAGS_arm64 += -Wstack-usage=1536
CFLAGS_riscv += -Wstack-usage=1536
CFLAGS_ppc64 += -Wstack-usage=1536
toolchain_to_dir = \
$(foreach arch,$(ARCH_SUPPORTED),\
$(eval CPPFLAGS_$(arch) += \
# set_stage_toolchain: Decides the toolchain to be used by every stage
# E.g.: If bootblock is x86_32, it sets ARCH-BOOTBLOCK-y = x86_32, whereas
# ARCH-BOOTBLOCK-n = armv7. Then, ARCH-BOOTBLOCK-y can be used anywhere to
# decide the compiler toolchain for bootblock stage
# This step is essential for initializing the toolchain for coreboot standard
# stages i.e. bootblock, romstage and ramstage, since it acts as the second
# parameter to create_class_compiler below in init_standard_toolchain
map_stage = $(strip $(if $(MAP-$(1)),$(MAP-$(1)),$(1)))
set_stage_toolchain= \
$(foreach arch,$(ARCH_SUPPORTED), \
$(eval ARCH-$(1)-$($(shell \
echo CONFIG_ARCH_$(call map_stage,$(1))_$(arch) | \
tr '[:lower:]' '[:upper:]')) := $(arch)))
# standard-archs: Tell which architectures are used by the standard stages.
standard-archs = $(sort $(foreach stagearch, \
$(patsubst %,ARCH-%-y,$(COREBOOT_STANDARD_STAGES)), \
# create_class_compiler: Used to create compiler tool set for
# special classes
# @1: special class
# @2: compiler set to be used
# e.g.: smm special class uses i386 as compiler set
define create_class_compiler
$(if $(2),,$(warning *** The toolchain architecture for $(1) is unknown.) \
$(error Check your .config file for CONFIG_ARCH_$(1)_* settings))
CC_$(1) := $(CC_$(2))
GCC_$(1) := $(GCC_CC_$(2))
LD_$(1) := $(LD_$(2))
NM_$(1) := $(NM_$(2))
AR_$(1) := $(AR_$(2))
GNATBIND_$(1) := $(GNATBIND_$(2))
OBJCOPY_$(1) := $(OBJCOPY_$(2))
OBJDUMP_$(1) := $(OBJDUMP_$(2))
STRIP_$(1) := $(STRIP_$(2))
READELF_$(1) := $(READELF_$(2))
CFLAGS_$(1) = $$(CFLAGS_common) $$(CFLAGS_$(2))
ADAFLAGS_$(1) = --RTS=$$(obj)/libgnat-$(2)/ $$(ADAFLAGS_common) $$(GCC_ADAFLAGS_$(2))
CPPFLAGS_$(1) = $$(CPPFLAGS_common) $$(CPPFLAGS_$(2)) -D__ARCH_$(2)__
COMPILER_RT_$(1) := $$(COMPILER_RT_$(2))
LDFLAGS_$(1) = $$(LDFLAGS_common) $$(LDFLAGS_$(2))
# define_class: Allows defining any program as dynamic class and compiler tool
# set for the same based on the architecture for which the program is to be
# compiled
# @1: program (class name)
# @2: architecture for which the program needs to be compiled
# IMP: Ensure that define_class is called before any .c or .S files are added to
# the class of the program. Check subdirs-y for order of subdirectory inclusions
define define_class
classes-y += $(1)
$(eval $(call create_class_compiler,$(1),$(2)))
# initialize standard toolchain (CC,AS and others) for give stage
# @1 : stage for which the toolchain is to be initialized
init_standard_toolchain = \
$(eval $(call set_stage_toolchain,$(1))) \
$(eval $(call create_class_compiler,$(1),$(ARCH-$(1)-y)))
init_stages = \
$(foreach stage,$(COREBOOT_STANDARD_STAGES), \
$(eval $(call init_standard_toolchain,$(stage))))
$(eval $(call toolchain_to_dir))
$(call init_stages)
# Test for coreboot toolchain (except when explicitly not requested)
ifneq ($(NOCOMPILE),1)
# Only run if we're doing a build (not for tests, kconfig, ...)
# rationale: gcc versions by Linux distributions tend to be quite messed up
# llvm/clang also needs patches supplied by the coreboot build
# Verify that the coreboot toolchain is being used.
$(foreach arch,$(sort $(foreach stage,\
$(if $(shell if [ -n "$(CC_$(arch))" ]; then \
$(CC_$(arch)) -v 2>&1 | grep -q "coreboot toolchain" || \
echo not-coreboot; else echo not-coreboot; fi), \
$(eval COMPILERFAIL:=1)\
$(warning The coreboot toolchain for '$(arch)'\
architecture was not found.)))
# If iasl doesn't match the current coreboot version, fail the test
# TODO: Figure out if iasl is even needed for the build.
$(if $(shell if [ -n "$(IASL)" ]; then \
$(IASL) -v 2>&1 | grep -q "coreboot toolchain" || \
echo not-coreboot; else echo not-coreboot; fi), \
$(eval COMPILERFAIL:=1)$(eval IASLFAIL:=1)\
$(warning The coreboot toolchain version of iasl \
'$(shell util/crossgcc/buildgcc -s iasl)' was not found))
# If the coreboot toolchain isn't being used, verify that there is A toolchain
$(foreach arch,$(sort \
$(foreach stage,$(COREBOOT_STANDARD_STAGES),$(ARCH-$(stage)-y))), \
$(if $(CC_$(arch)),, $(eval COMPILERFAIL:=1) \
$(warning No compiler found for '$(arch)' architecture. \
Install one or use the coreboot toolchain?)) )
# If iasl isn't present, fail
# TODO: Figure out if iasl is even needed for the build.
$(if $(IASL),, $(eval COMPILERFAIL:=1)$(eval IASLFAIL:=1) \
$(warning iasl not found. \
Please install it or use the coreboot toolchain.))
# If the compiler check failed, print out warnings
ifeq ($(COMPILERFAIL),1)
ifneq ($(XGCCPATH),)
$(warning )
$(warning Path to your toolchain is currently set to '$(XGCCPATH)')
$(warning )
$(warning To build the entire coreboot toolchain: run 'make crossgcc')
ifeq ($(IASLFAIL),1)
$(warning To build just IASL: run 'make iasl')
endif #($(IASLFAIL),1)
$(warning For more toolchain build targets: run 'make help_toolchain')
$(warning )
$(warning To try to use any toolchain in your path, \
run 'make menuconfig', then select)
$(warning the config option: 'General setup', \
and 'Allow building with any toolchain')
$(warning Note that this is NOT supported. \
Using it means you're on your own.)
$(warning )
$(error Halting the build)
endif #($(COMPILERFAIL),1)
endif #($(NOCOMPILE),1)
# Run the toolchain version checks if the requested target is 'test-toolchain'
# Checks the versions of GCC, binutils, clang, and IASL
ifneq ($(MAKECMDGOALS),)
ifneq ($(filter test-toolchain,$(MAKECMDGOALS)),)
$(foreach arch, $(ARCH_SUPPORTED), \
$(if $(shell if [ -n "$(GCC_CC_$(arch))" ]; then \
$(GCC_CC_$(arch)) -v 2>&1 | \
grep -q "$(shell util/crossgcc/buildgcc -s gcc)" || \
echo not-current; fi), \
$(warning The coreboot toolchain version of gcc for '$(arch)' \
architecture is not the current version.)) \
$(if $(shell if [ -n "$(CLANG_CC_$(arch))" ]; then \
$(CLANG_CC_$(arch)) -v 2>&1 | \
grep -q "$(shell util/crossgcc/buildgcc -s clang)" || \
echo not-current; fi), \
$(warning The coreboot toolchain version of clang for \
'$(arch)' architecture is not the current version.)) \
$(if $(shell if [ "$(OBJDUMP_$(arch))" != "invalidobjdump" ]; then \
$(OBJDUMP_$(arch)) -v 2>&1 | \
grep -q "$(shell util/crossgcc/buildgcc -s binutils)" || \
echo not-current; fi), \
$(warning The coreboot toolchain version of binutils for \
'$(arch)' architecture is not the current version.)) \
$(if $(shell if [ -n "$(IASL)" ]; then $(IASL) -v 2>&1 | \
grep -q "$(shell util/crossgcc/buildgcc -s iasl)" || \
echo not-coreboot; fi), \
$(warning The coreboot toolchain version of iasl \
is not the current version))
endif #($(filter crossgcc_check%,$(MAKECMDGOALS)),)
endif #($(MAKECMDGOALS),)