amd_blobs/cezanne/Cezanne Vbios Release Notes...

170 lines
8.0 KiB
Plaintext
Raw Permalink Blame History

============================ Cezanne 021 VBIOS release ========================================
Cezanne generic Baseline VBIOS 021
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.021 02/23/22,06:21:16 2387390@17.10.0.31 ATOMBuild#603188
Major changes:
1. Set the DISPCLK/DPPCLK to max 700Mhz when vPOST init, it will not change again till enter OS driver loaded.
============================ Cezanne 020 VBIOS release ========================================
Cezanne generic Baseline VBIOS 020
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.020 11/25/21,23:17:28 2382100@17.10.0.30 ATOMBuild#595471
Major changes:
1. Enable USB-C capability as default on display path PHYD and PHYE
============================ Cezanne 019 VBIOS release ========================================
Cezanne generic Baseline VBIOS 019
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.019 09/24/21,11:21:10 2360689@17.10.0.30 ATOMBuild#586451
Major changes:
1. Disable USB-C capability as default on PHYD and PHYE
============================ Cezanne 018 VBIOS release ========================================
Cezanne generic Baseline VBIOS 018
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.018 02/28/21,08:58:46 2267626@17.10.0.29 ATOMBuild#554021
Major changes:
1. WA for DCN block Pstate change @SMU when set mode
2. Update rlc_gpu_timer_refclk to correct SW delay timer
============================ Cezanne 017 VBIOS release ========================================
Cezanne generic Baseline VBIOS 017
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.017 11/13/20,02:11:10 2201120@17.10.0.28 ATOMBuild#540614
Major changes:
1. Add display connector caps record for driver to tell if external DFPx monitor set as "INTERNAL" display.
============================ Cezanne 016 VBIOS release ========================================
Cezanne generic Baseline VBIOS 016
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.016 09/11/20,04:55:20 2170377@17.10.0.27 ATOMBuild#531528
Major feature:
1. Update standard VESA mode table, Mode list and timing reviewed follow VESA DMT Version 1.0.13 released on February 8, 2013
============================ Cezanne 015 VBIOS release ========================================
Cezanne generic Baseline VBIOS 015
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.015 08/24/20,06:11:57 2162078@17.10.0.26 ATOMBuild#528480
Major feature:
1. DISP CLK increase to max 700Mhz to support high pixel clock eDP.
2. PLAT-68663: Connceto to PEI GOP first than DXE GOP cause system hang
============================ Cezanne 014 VBIOS release ========================================
Cezanne generic Baseline VBIOS 014
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.014 08/16/20,22:43:14 2158707@17.10.0.25 ATOMBuild#527732
Major feature:
1. Update standard VESA mode table for optimized display mode functionality
============================ Cezanne 013 VBIOS release ========================================
Cezanne generic Baseline VBIOS 013
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.013 08/14/20,01:47:14 2158150@17.10.0.24 ATOMBuild#527574
Major feature:
1. Add new display PHY tuning items in integrated system info table V1_12
============================ Cezanne 012 VBIOS release ========================================
Cezanne generic Baseline VBIOS 012
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.012 08/04/20,04:17:23 2153049@17.10.0.23 ATOMBuild#525132
Major feature:
1. Due to build server problem, rebuilt generic VBIOS 011 to include the latest setting.
============================ Cezanne 011 VBIOS release ========================================
Cezanne generic Baseline VBIOS 011
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.011 07/27/20,02:39:12 2149991@17.10.0.23 ATOMBuild#524291
Major feature:
1. PLAT-66584 - DRTM enabled + GPU driver installed causes system to hang at POST logo screen with PC B00000CAD, Fail Rate 100%
Setting HUBP_BLANK_EN = 0 on pipe that is not enabled will put pipe in undefined state.
2. PLAT-66156 - VGA monitor no display output after system reboot/S4/S5 when it's connected by type-c to VGA dongle
ENABLE_DPHY_TX_RESET=0x1 enable DPPHY TX reset as on Renoir platfrom.
============================ Cezanne 010 VBIOS release ========================================
Cezanne generic Baseline VBIOS 010
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.010 07/16/20,22:44:43 2145705@17.10.0.22 ATOMBuild#523184
Major feature:
1. AUX pre-charge setting for CZN/Lucienne
[IPSE]
Please only update VBIOS for Cezanne and Lucienne and don<6F>t touch Renoir (in production).
AUX_TX_PRECHARGE_LEN = 0xD (updated)
AUX_TX_PRECHARGE_LEN_MUL = 0 (updated)
AUX_TX_OE_ASSERT_TIME = 1 (no change)
AUX_TX_PRECHARGE_SYMBOLS = 0x1C (no change)
AUX_MODE_DET_CHECK_DELAY = 2 (no change)
AUXn_AUX_CTRL = 2 (added)
AUXn_VOD_TUNE = 2 (added)
============================ Cezanne 009 VBIOS release ========================================
Cezanne generic Baseline VBIOS 009
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.009 07/01/20,02:03:02 2139194@17.10.0.21 ATOMBuild#520539
Major feature:
1. Support the eDP which pixel clock over 568Mhz.
============================ Cezanne 008 VBIOS release ========================================
Cezanne generic Baseline VBIOS 008
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.008 06/22/20,05:50:17 2135205@17.10.0.20 ATOMBuild#519746
Major feature:
1. Remove the bit "RDPCS_PHY_TEST_POWERDOWN" from CZN/LCN VBIOS, it needs re-load PHY FW for programming
RDPCS_PHY_TEST_POWERDOWN from 1 to 0.
2. Update the LANEx_ANA_TX_LP_ATT setting to improve SI.
============================ Cezanne 007 VBIOS release ========================================
Cezanne generic Baseline VBIOS 007
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.007 06/03/20,23:21:17 2126342@17.10.0.19 ATOMBuild#517791
Major feature:
1. New phy power down seq. apply on PhyA/B/C, usb-c combo-Phy works w/ old seq.
============================ Cezanne 006 VBIOS release ========================================
Cezanne generic Baseline VBIOS 006
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.006 05/29/20,05:15:40 2123598@17.10.0.19 ATOMBuild#517227
Major feature:
1. Implement new PHY MPLLb setting for DP and HDMI on CZN
============================ Cezanne 005 VBIOS release ========================================
Cezanne generic Baseline VBIOS 005
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.005 05/13/20,10:09:01 2114552@17.10.0.18 ATOMBuild#515566
Major feature:
1. Fix HDMI hotplug function abnormal in OS
2. Disable DPHY_TX_RESET
============================ Cezanne 004 VBIOS release ========================================
Cezanne generic Baseline VBIOS 004
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.004 05/11/20,13:23:11 2113274@17.10.0.17 ATOMBuild#515297
Major feature:
1. PLAT-63233 - Hangs in VBIOS when POST if boot w/ DP2HDMI dongle
2. PLAT-63243 -System hang 0000217 when connect KVM, Failrate:5/5
3. DIAG-7542 - can't be booted without connecting to the monitor
============================ Cezanne 003 VBIOS release ========================================
Cezanne generic Baseline VBIOS 003
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.003 04/27/20,05:16:46 2106505@17.10.0.16 ATOMBuild#511891
Major feature:
1. New PHY power down sequence for CZN
============================ Cezanne 002 VBIOS release ========================================
Cezanne generic Baseline VBIOS 002
Cezanne A0 0x1638 105_D27000_00A CZNGenericVbios.002 03/04/20,09:04:39 2079353@17.10.0.15 ATOMBuild#503889
Major feature:
1. Sync up w/ the latest RN VBIOS 026
============================ Cezanne 001 VBIOS release ========================================
Cezanne generic Baseline VBIOS 001
Cezanne A0 0x1638 105_D27000_00A CezanneGenericVbios.001 11/07/19,13:40:26 2026739@17.10.0.12 ATOMBuild#488889
Major feature:
1. First Cenaane protoype Vbios.