segger: update to 3.30

Update to 3.30 and move zephyr related files to the Zephyr tree.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
pull/7/head
Anas Nashif 2 years ago
parent 38c79a447e
commit b60d6e14b6

@ -1,8 +0,0 @@
zephyr_include_directories_ifdef(CONFIG_USE_SEGGER_RTT rtt)
zephyr_sources_ifdef(CONFIG_USE_SEGGER_RTT
rtt/SEGGER_RTT.c
rtt/SEGGER_RTT_zephyr.c
)
zephyr_include_directories_ifdef(CONFIG_SEGGER_SYSTEMVIEW systemview)
zephyr_sources_ifdef(CONFIG_SEGGER_SYSTEMVIEW systemview/SEGGER_SYSVIEW.c)

@ -0,0 +1,113 @@
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2021 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the SystemView and RTT protocol, and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* condition is met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this condition and the following disclaimer. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: 3.30 *
* *
**********************************************************************
----------------------------------------------------------------------
File : Global.h
Purpose : Global types
In case your application already has a Global.h, you should
merge the files. In order to use Segger code, the types
U8, U16, U32, I8, I16, I32 need to be defined in Global.h;
additional definitions do not hurt.
Revision: $Rev: 12501 $
---------------------------END-OF-HEADER------------------------------
*/
#ifndef GLOBAL_H // Guard against multiple inclusion
#define GLOBAL_H
#define U8 unsigned char
#define I8 signed char
#define U16 unsigned short
#define I16 signed short
#ifdef __x86_64__
#define U32 unsigned
#define I32 int
#else
#define U32 unsigned long
#define I32 signed long
#endif
//
// CC_NO_LONG_SUPPORT can be defined to compile test
// without long support for compilers that do not
// support C99 and its long type.
//
#ifdef CC_NO_LONG_SUPPORT
#define PTR_ADDR U32
#else // Supports long type.
#if defined(_WIN32) && !defined(__clang__) && !defined(__MINGW32__)
//
// Microsoft VC6 compiler related
//
#define U64 unsigned __int64
#define U128 unsigned __int128
#define I64 __int64
#define I128 __int128
#if _MSC_VER <= 1200
#define U64_C(x) x##UI64
#else
#define U64_C(x) x##ULL
#endif
#else
//
// C99 compliant compiler
//
#define U64 unsigned long long
#define I64 signed long long
#define U64_C(x) x##ULL
#endif
#if (defined(_WIN64) || defined(__LP64__)) // 64-bit symbols used by Visual Studio and GCC, maybe others as well.
#define PTR_ADDR U64
#else
#define PTR_ADDR U32
#endif
#endif // Supports long type.
#endif // Avoid multiple inclusion
/*************************** End of file ****************************/

@ -1,359 +1,432 @@
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2019 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: V2.52h *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT_Conf.h
Purpose : Implementation of SEGGER real-time transfer (RTT) which
allows real-time communication on targets which support
debugger memory accesses while the CPU is running.
Revision: $Rev: 13430 $
*/
#ifndef SEGGER_RTT_CONF_H
#define SEGGER_RTT_CONF_H
#ifdef __IAR_SYSTEMS_ICC__
#include <intrinsics.h>
#endif
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
#define SEGGER_RTT_MAX_NUM_UP_BUFFERS CONFIG_SEGGER_RTT_MAX_NUM_UP_BUFFERS // Max. number of up-buffers (T->H) available on this target (Default: 3)
#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS CONFIG_SEGGER_RTT_MAX_NUM_DOWN_BUFFERS // Max. number of down-buffers (H->T) available on this target (Default: 3)
#define BUFFER_SIZE_UP CONFIG_SEGGER_RTT_BUFFER_SIZE_UP // Size of the buffer for terminal output of target, up to host (Default: 1k)
#define BUFFER_SIZE_DOWN CONFIG_SEGGER_RTT_BUFFER_SIZE_DOWN // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
#define SEGGER_RTT_PRINTF_BUFFER_SIZE CONFIG_SEGGER_RTT_PRINTF_BUFFER_SIZE // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64)
// Mode for pre-initialized terminal channel (buffer 0)
#define SEGGER_RTT_MODE_DEFAULT CONFIG_SEGGER_RTT_MODE
#define USE_RTT_ASM (0) // Use assembler version of SEGGER_RTT.c when 1
#if defined(CONFIG_SEGGER_RTT_SECTION_DTCM)
#define SEGGER_RTT_SECTION ".dtcm_data"
#endif
/*********************************************************************
*
* RTT memcpy configuration
*
* memcpy() is good for large amounts of data,
* but the overhead is big for small amounts, which are usually stored via RTT.
* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead.
*
* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions.
* This is may be required with memory access restrictions,
* such as on Cortex-A devices with MMU.
*/
#if defined(CONFIG_SEGGER_RTT_MEMCPY_USE_BYTELOOP)
#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 1 // 1: Use a simple byte-loop
#else
#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY
#endif
//
// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets
//
//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))
// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes))
//#endif
//
// Target is not allowed to perform other RTT operations while string still has not been stored completely.
// Otherwise we would probably end up with a mixed string in the buffer.
// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here.
//
// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4.
// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches.
// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly.
// (Higher priority = lower priority number)
// Default value for embOS: 128u
// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC
// or define SEGGER_RTT_LOCK() to completely disable interrupts.
//
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
/*********************************************************************
*
* RTT lock configuration for SEGGER Embedded Studio,
* Rowley CrossStudio and GCC
*/
#if (defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__) || (defined __clang__)
#ifdef __ZEPHYR__
#include <kernel.h>
extern struct k_mutex rtt_term_mutex;
#define SEGGER_RTT_LOCK() k_mutex_lock(&rtt_term_mutex, K_FOREVER);
#define SEGGER_RTT_UNLOCK() k_mutex_unlock(&rtt_term_mutex);
#define RTT_USE_ASM 0
#elif (defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__))
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs %0, primask \n\t" \
"movs r1, $1 \n\t" \
"msr primask, r1 \n\t" \
: "=r" (LockState) \
: \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \
: \
: "r" (LockState) \
: \
); \
}
#elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs %0, basepri \n\t" \
"mov r1, %1 \n\t" \
"msr basepri, r1 \n\t" \
: "=r" (LockState) \
: "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \
: \
: "r" (LockState) \
: \
); \
}
#elif defined(__ARM_ARCH_7A__)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
__asm volatile ("mrs r1, CPSR \n\t" \
"mov %0, r1 \n\t" \
"orr r1, r1, #0xC0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: "=r" (LockState) \
: \
: "r1" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \
"mrs r1, CPSR \n\t" \
"bic r1, r1, #0xC0 \n\t" \
"and r0, r0, #0xC0 \n\t" \
"orr r1, r1, r0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: \
: "r" (LockState) \
: "r0", "r1" \
); \
}
#else
#define SEGGER_RTT_LOCK()
#define SEGGER_RTT_UNLOCK()
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR EWARM
*/
#ifdef __ICCARM__
#if (defined (__ARM6M__) && (__CORE__ == __ARM6M__))
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
}
#elif ((defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || (defined (__ARM7M__) && (__CORE__ == __ARM7M__)))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_BASEPRI(); \
__set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() __set_BASEPRI(LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RX
*/
#ifdef __ICCRX__
#define SEGGER_RTT_LOCK() { \
unsigned long LockState; \
LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RL78
*/
#ifdef __ICCRL78__
#define SEGGER_RTT_LOCK() { \
__istate_t LockState; \
LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for KEIL ARM
*/
#ifdef __CC_ARM
#if (defined __TARGET_ARCH_6S_M)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
register unsigned char PRIMASK __asm( "primask"); \
LockState = PRIMASK; \
PRIMASK = 1u; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() PRIMASK = LockState; \
__schedule_barrier(); \
}
#elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
register unsigned char BASEPRI __asm( "basepri"); \
LockState = BASEPRI; \
BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() BASEPRI = LockState; \
__schedule_barrier(); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for TI ARM
*/
#ifdef __TI_ARM__
#if defined (__TI_ARM_V6M0__)
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(LockState); \
}
#elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int LockState; \
LockState = _set_interrupt_priority(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() _set_interrupt_priority(LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for CCRX
*/
#ifdef __RX
#define SEGGER_RTT_LOCK() { \
unsigned long LockState; \
LockState = get_psw() & 0x010000; \
clrpsw_i();
#define SEGGER_RTT_UNLOCK() set_psw(get_psw() | LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration fallback
*/
#ifndef SEGGER_RTT_LOCK
#define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts)
#endif
#ifndef SEGGER_RTT_UNLOCK
#define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
#endif
#endif
/*************************** End of file ****************************/
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2021 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the SystemView and RTT protocol, and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* condition is met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this condition and the following disclaimer. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: 3.30 *
* *
**********************************************************************
---------------------------END-OF-HEADER------------------------------
File : SEGGER_RTT_Conf.h
Purpose : Implementation of SEGGER real-time transfer (RTT) which
allows real-time communication on targets which support
debugger memory accesses while the CPU is running.
Revision: $Rev: 21386 $
*/
#ifndef SEGGER_RTT_CONF_H
#define SEGGER_RTT_CONF_H
#ifdef __IAR_SYSTEMS_ICC__
#include <intrinsics.h>
#endif
/*********************************************************************
*
* Defines, configurable
*
**********************************************************************
*/
//
// Take in and set to correct values for Cortex-A systems with CPU cache
//
//#define SEGGER_RTT_CPU_CACHE_LINE_SIZE (32) // Largest cache line size (in bytes) in the current system
//#define SEGGER_RTT_UNCACHED_OFF (0xFB000000) // Address alias where RTT CB and buffers can be accessed uncached
//
// Most common case:
// Up-channel 0: RTT
// Up-channel 1: SystemView
//
#ifndef SEGGER_RTT_MAX_NUM_UP_BUFFERS
#define SEGGER_RTT_MAX_NUM_UP_BUFFERS (3) // Max. number of up-buffers (T->H) available on this target (Default: 3)
#endif
//
// Most common case:
// Down-channel 0: RTT
// Down-channel 1: SystemView
//
#ifndef SEGGER_RTT_MAX_NUM_DOWN_BUFFERS
#define SEGGER_RTT_MAX_NUM_DOWN_BUFFERS (3) // Max. number of down-buffers (H->T) available on this target (Default: 3)
#endif
#ifndef BUFFER_SIZE_UP
#define BUFFER_SIZE_UP (1024) // Size of the buffer for terminal output of target, up to host (Default: 1k)
#endif
#ifndef BUFFER_SIZE_DOWN
#define BUFFER_SIZE_DOWN (16) // Size of the buffer for terminal input to target from host (Usually keyboard input) (Default: 16)
#endif
#ifndef SEGGER_RTT_PRINTF_BUFFER_SIZE
#define SEGGER_RTT_PRINTF_BUFFER_SIZE (64u) // Size of buffer for RTT printf to bulk-send chars via RTT (Default: 64)
#endif
#ifndef SEGGER_RTT_MODE_DEFAULT
#define SEGGER_RTT_MODE_DEFAULT SEGGER_RTT_MODE_NO_BLOCK_SKIP // Mode for pre-initialized terminal channel (buffer 0)
#endif
#if defined(CONFIG_SEGGER_RTT_SECTION_DTCM)
#define SEGGER_RTT_SECTION ".dtcm_data"
#endif
/*********************************************************************
*
* RTT memcpy configuration
*
* memcpy() is good for large amounts of data,
* but the overhead is big for small amounts, which are usually stored via RTT.
* With SEGGER_RTT_MEMCPY_USE_BYTELOOP a simple byte loop can be used instead.
*
* SEGGER_RTT_MEMCPY() can be used to replace standard memcpy() in RTT functions.
* This is may be required with memory access restrictions,
* such as on Cortex-A devices with MMU.
*/
#ifndef SEGGER_RTT_MEMCPY_USE_BYTELOOP
#define SEGGER_RTT_MEMCPY_USE_BYTELOOP 0 // 0: Use memcpy/SEGGER_RTT_MEMCPY, 1: Use a simple byte-loop
#endif
//
// Example definition of SEGGER_RTT_MEMCPY to external memcpy with GCC toolchains and Cortex-A targets
//
//#if ((defined __SES_ARM) || (defined __CROSSWORKS_ARM) || (defined __GNUC__)) && (defined (__ARM_ARCH_7A__))
// #define SEGGER_RTT_MEMCPY(pDest, pSrc, NumBytes) SEGGER_memcpy((pDest), (pSrc), (NumBytes))
//#endif
//
// Target is not allowed to perform other RTT operations while string still has not been stored completely.
// Otherwise we would probably end up with a mixed string in the buffer.
// If using RTT from within interrupts, multiple tasks or multi processors, define the SEGGER_RTT_LOCK() and SEGGER_RTT_UNLOCK() function here.
//
// SEGGER_RTT_MAX_INTERRUPT_PRIORITY can be used in the sample lock routines on Cortex-M3/4.
// Make sure to mask all interrupts which can send RTT data, i.e. generate SystemView events, or cause task switches.
// When high-priority interrupts must not be masked while sending RTT data, SEGGER_RTT_MAX_INTERRUPT_PRIORITY needs to be adjusted accordingly.
// (Higher priority = lower priority number)
// Default value for embOS: 128u
// Default configuration in FreeRTOS: configMAX_SYSCALL_INTERRUPT_PRIORITY: ( configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY << (8 - configPRIO_BITS) )
// In case of doubt mask all interrupts: 1 << (8 - BASEPRI_PRIO_BITS) i.e. 1 << 5 when 3 bits are implemented in NVIC
// or define SEGGER_RTT_LOCK() to completely disable interrupts.
//
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20) // Interrupt priority to lock on SEGGER_RTT_LOCK on Cortex-M3/4 (Default: 0x20)
#endif
/*********************************************************************
*
* RTT lock configuration for SEGGER Embedded Studio,
* Rowley CrossStudio and GCC
*/
#if ((defined(__SES_ARM) || defined(__SES_RISCV) || defined(__CROSSWORKS_ARM) || defined(__GNUC__) || defined(__clang__)) && !defined (__CC_ARM) && !defined(WIN32))
#if (defined(__ARM_ARCH_6M__) || defined(__ARM_ARCH_8M_BASE__))
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
__asm volatile ("mrs %0, primask \n\t" \
"movs r1, #1 \n\t" \
"msr primask, r1 \n\t" \
: "=r" (_SEGGER_RTT__LockState) \
: \
: "r1", "cc" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr primask, %0 \n\t" \
: \
: "r" (_SEGGER_RTT__LockState) \
: \
); \
}
#elif (defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__) || defined(__ARM_ARCH_8M_MAIN__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
__asm volatile ("mrs %0, basepri \n\t" \
"mov r1, %1 \n\t" \
"msr basepri, r1 \n\t" \
: "=r" (_SEGGER_RTT__LockState) \
: "i"(SEGGER_RTT_MAX_INTERRUPT_PRIORITY) \
: "r1", "cc" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("msr basepri, %0 \n\t" \
: \
: "r" (_SEGGER_RTT__LockState) \
: \
); \
}
#elif defined(__ARM_ARCH_7A__)
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
__asm volatile ("mrs r1, CPSR \n\t" \
"mov %0, r1 \n\t" \
"orr r1, r1, #0xC0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: "=r" (_SEGGER_RTT__LockState) \
: \
: "r1", "cc" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \
"mrs r1, CPSR \n\t" \
"bic r1, r1, #0xC0 \n\t" \
"and r0, r0, #0xC0 \n\t" \
"orr r1, r1, r0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: \
: "r" (_SEGGER_RTT__LockState) \
: "r0", "r1", "cc" \
); \
}
#elif defined(__riscv) || defined(__riscv_xlen)
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
__asm volatile ("csrr %0, mstatus \n\t" \
"csrci mstatus, 8 \n\t" \
"andi %0, %0, 8 \n\t" \
: "=r" (_SEGGER_RTT__LockState) \
: \
: \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("csrr a1, mstatus \n\t" \
"or %0, %0, a1 \n\t" \
"csrs mstatus, %0 \n\t" \
: \
: "r" (_SEGGER_RTT__LockState) \
: "a1" \
); \
}
#else
#define SEGGER_RTT_LOCK()
#define SEGGER_RTT_UNLOCK()
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR EWARM
*/
#ifdef __ICCARM__
#if (defined (__ARM6M__) && (__CORE__ == __ARM6M__)) || \
(defined (__ARM8M_BASELINE__) && (__CORE__ == __ARM8M_BASELINE__))
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \
}
#elif (defined (__ARM7EM__) && (__CORE__ == __ARM7EM__)) || \
(defined (__ARM7M__) && (__CORE__ == __ARM7M__)) || \
(defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__)) || \
(defined (__ARM8M_MAINLINE__) && (__CORE__ == __ARM8M_MAINLINE__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = __get_BASEPRI(); \
__set_BASEPRI(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() __set_BASEPRI(_SEGGER_RTT__LockState); \
}
#elif (defined (__ARM7A__) && (__CORE__ == __ARM7A__)) || \
(defined (__ARM7R__) && (__CORE__ == __ARM7R__))
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
__asm volatile ("mrs r1, CPSR \n\t" \
"mov %0, r1 \n\t" \
"orr r1, r1, #0xC0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: "=r" (_SEGGER_RTT__LockState) \
: \
: "r1", "cc" \
);
#define SEGGER_RTT_UNLOCK() __asm volatile ("mov r0, %0 \n\t" \
"mrs r1, CPSR \n\t" \
"bic r1, r1, #0xC0 \n\t" \
"and r0, r0, #0xC0 \n\t" \
"orr r1, r1, r0 \n\t" \
"msr CPSR_c, r1 \n\t" \
: \
: "r" (_SEGGER_RTT__LockState) \
: "r0", "r1", "cc" \
); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RX
*/
#ifdef __ICCRX__
#define SEGGER_RTT_LOCK() { \
unsigned long _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for IAR RL78
*/
#ifdef __ICCRL78__
#define SEGGER_RTT_LOCK() { \
__istate_t _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = __get_interrupt_state(); \
__disable_interrupt();
#define SEGGER_RTT_UNLOCK() __set_interrupt_state(_SEGGER_RTT__LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for KEIL ARM
*/
#ifdef __CC_ARM
#if (defined __TARGET_ARCH_6S_M)
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
register unsigned char _SEGGER_RTT__PRIMASK __asm( "primask"); \
_SEGGER_RTT__LockState = _SEGGER_RTT__PRIMASK; \
_SEGGER_RTT__PRIMASK = 1u; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() _SEGGER_RTT__PRIMASK = _SEGGER_RTT__LockState; \
__schedule_barrier(); \
}
#elif (defined(__TARGET_ARCH_7_M) || defined(__TARGET_ARCH_7E_M))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
register unsigned char BASEPRI __asm( "basepri"); \
_SEGGER_RTT__LockState = BASEPRI; \
BASEPRI = SEGGER_RTT_MAX_INTERRUPT_PRIORITY; \
__schedule_barrier();
#define SEGGER_RTT_UNLOCK() BASEPRI = _SEGGER_RTT__LockState; \
__schedule_barrier(); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for TI ARM
*/
#ifdef __TI_ARM__
#if defined (__TI_ARM_V6M0__)
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = __get_PRIMASK(); \
__set_PRIMASK(1);
#define SEGGER_RTT_UNLOCK() __set_PRIMASK(_SEGGER_RTT__LockState); \
}
#elif (defined (__TI_ARM_V7M3__) || defined (__TI_ARM_V7M4__))
#ifndef SEGGER_RTT_MAX_INTERRUPT_PRIORITY
#define SEGGER_RTT_MAX_INTERRUPT_PRIORITY (0x20)
#endif
#define SEGGER_RTT_LOCK() { \
unsigned int _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = _set_interrupt_priority(SEGGER_RTT_MAX_INTERRUPT_PRIORITY);
#define SEGGER_RTT_UNLOCK() _set_interrupt_priority(_SEGGER_RTT__LockState); \
}
#endif
#endif
/*********************************************************************
*
* RTT lock configuration for CCRX
*/
#ifdef __RX
#include <machine.h>
#define SEGGER_RTT_LOCK() { \
unsigned long _SEGGER_RTT__LockState; \
_SEGGER_RTT__LockState = get_psw() & 0x010000; \
clrpsw_i();
#define SEGGER_RTT_UNLOCK() set_psw(get_psw() | _SEGGER_RTT__LockState); \
}
#endif
/*********************************************************************
*
* RTT lock configuration for embOS Simulation on Windows
* (Can also be used for generic RTT locking with embOS)
*/
#if defined(WIN32) || defined(SEGGER_RTT_LOCK_EMBOS)
void OS_SIM_EnterCriticalSection(void);
void OS_SIM_LeaveCriticalSection(void);
#define SEGGER_RTT_LOCK() { \
OS_SIM_EnterCriticalSection();
#define SEGGER_RTT_UNLOCK() OS_SIM_LeaveCriticalSection(); \
}
#endif
/*********************************************************************
*
* RTT lock configuration fallback
*/
#ifndef SEGGER_RTT_LOCK
#define SEGGER_RTT_LOCK() // Lock RTT (nestable) (i.e. disable interrupts)
#endif
#ifndef SEGGER_RTT_UNLOCK
#define SEGGER_RTT_UNLOCK() // Unlock RTT (nestable) (i.e. enable previous interrupt lock state)
#endif
#endif
/*************************** End of file ****************************/

@ -1,228 +1,248 @@
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2019 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the RTT protocol and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* conditions are met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this list of conditions and the following disclaimer. *
* *
* o Redistributions in binary form must reproduce the above *
* copyright notice, this list of conditions and the following *
* disclaimer in the documentation and/or other materials provided *
* with the distribution. *
* *
* o Neither the name of SEGGER Microcontroller GmbH *
* nor the names of its contributors may be used to endorse or *
* promote products derived from this software without specific *
* prior written permission. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: V2.52h *
* *
**********************************************************************
-------------------------- END-OF-HEADER -----------------------------
*/
#ifndef SEGGER_H // Guard against multiple inclusion
#define SEGGER_H
#include <stdarg.h>
#include "Global.h" // Type definitions: U8, U16, U32, I8, I16, I32
#if defined(__cplusplus)
extern "C" { /* Make sure we have C-declarations in C++ programs */
#endif
/*********************************************************************
*
* Keywords/specifiers
*
**********************************************************************
*/
#ifndef INLINE
#ifdef _WIN32
//
// Microsoft VC6 and newer.
// Force inlining without cost checking.
//
#define INLINE __forceinline
#elif (defined(__ZEPHYR__))
#include <toolchain.h>
#else
#if (defined(__GNUC__))
//
// Force inlining with GCC
//
#define INLINE inline __attribute__((always_inline))
#elif (defined(__CC_ARM))
//
// Force inlining with ARMCC (Keil)
//
#define INLINE __inline
#elif (defined(__ICCARM__) || defined(__RX) || defined(__ICCRX__))
//
// Other known compilers.
//
#define INLINE inline
#else
//
// Unknown compilers.
//
#define INLINE
#endif
#endif
#endif
/*********************************************************************
*
* Function-like macros
*
**********************************************************************
*/
#define SEGGER_COUNTOF(a) (sizeof((a))/sizeof((a)[0]))
#define SEGGER_MIN(a,b) (((a) < (b)) ? (a) : (b))
#define SEGGER_MAX(a,b) (((a) > (b)) ? (a) : (b))
#ifndef SEGGER_USE_PARA // Some compiler complain about unused parameters.
#define SEGGER_USE_PARA(Para) (void)Para // This works for most compilers.
#endif
/*********************************************************************
*
* Defines
*
**********************************************************************
*/
#define SEGGER_PRINTF_FLAG_ADJLEFT (1 << 0)
#define SEGGER_PRINTF_FLAG_SIGNFORCE (1 << 1)
#define SEGGER_PRINTF_FLAG_SIGNSPACE (1 << 2)
#define SEGGER_PRINTF_FLAG_PRECEED (1 << 3)
#define SEGGER_PRINTF_FLAG_ZEROPAD (1 << 4)
#define SEGGER_PRINTF_FLAG_NEGATIVE (1 << 5)
/*********************************************************************
*
* Types
*
**********************************************************************
*/
typedef struct {
char* pBuffer;
int BufferSize;
int Cnt;
} SEGGER_BUFFER_DESC;
typedef struct {
unsigned int CacheLineSize; // 0: No Cache. Most Systems such as ARM9 use a 32 bytes cache line size.
void (*pfDMB) (void); // Optional DMB function for Data Memory Barrier to make sure all memory operations are completed.
void (*pfClean) (void *p, unsigned NumBytes); // Optional clean function for cached memory.
void (*pfInvalidate)(void *p, unsigned NumBytes); // Optional invalidate function for cached memory.
} SEGGER_CACHE_CONFIG;
typedef struct SEGGER_SNPRINTF_CONTEXT_struct SEGGER_SNPRINTF_CONTEXT;
struct SEGGER_SNPRINTF_CONTEXT_struct {
void* pContext; // Application specific context.
SEGGER_BUFFER_DESC* pBufferDesc; // Buffer descriptor to use for output.
void (*pfFlush)(SEGGER_SNPRINTF_CONTEXT* pContext); // Callback executed once the buffer is full. Callback decides if the buffer gets cleared to store more or not.
};
typedef struct {
void (*pfStoreChar) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, char c);
int (*pfPrintUnsigned) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, U32 v, unsigned Base, char Flags, int Width, int Precision);
int (*pfPrintInt) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, I32 v, unsigned Base, char Flags, int Width, int Precision);
} SEGGER_PRINTF_API;
typedef void (*SEGGER_pFormatter)(SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, const SEGGER_PRINTF_API* pApi, va_list* pParamList, char Lead, int Width, int Precision);
typedef struct SEGGER_PRINTF_FORMATTER {
struct SEGGER_PRINTF_FORMATTER* pNext; // Pointer to next formatter.
SEGGER_pFormatter pfFormatter; // Formatter function.
char Specifier; // Format specifier.
} SEGGER_PRINTF_FORMATTER;
/*********************************************************************
*
* Utility functions
*
**********************************************************************
*/
//
// Memory operations.
//
void SEGGER_ARM_memcpy(void* pDest, const void* pSrc, int NumBytes);
void SEGGER_memcpy (void* pDest, const void* pSrc, unsigned NumBytes);
void SEGGER_memxor (void* pDest, const void* pSrc, unsigned NumBytes);
//
// String functions.
//
int SEGGER_atoi (const char* s);
int SEGGER_isalnum (int c);
int SEGGER_isalpha (int c);
unsigned SEGGER_strlen (const char* s);
int SEGGER_tolower (int c);
int SEGGER_strcasecmp(const char* sText1, const char* sText2);
//
// Buffer/printf related.
//
void SEGGER_StoreChar (SEGGER_BUFFER_DESC* pBufferDesc, char c);
void SEGGER_PrintUnsigned(SEGGER_BUFFER_DESC* pBufferDesc, U32 v, unsigned Base, int Precision);
void SEGGER_PrintInt (SEGGER_BUFFER_DESC* pBufferDesc, I32 v, unsigned Base, int Precision);
int SEGGER_snprintf (char* pBuffer, int BufferSize, const char* sFormat, ...);
int SEGGER_vsnprintf (char* pBuffer, int BufferSize, const char* sFormat, va_list ParamList);
int SEGGER_vsnprintfEx (SEGGER_SNPRINTF_CONTEXT* pContext, const char* sFormat, va_list ParamList);
int SEGGER_PRINTF_AddFormatter (SEGGER_PRINTF_FORMATTER* pFormatter, SEGGER_pFormatter pfFormatter, char c);
void SEGGER_PRINTF_AddDoubleFormatter(void);
void SEGGER_PRINTF_AddIPFormatter (void);
void SEGGER_PRINTF_AddHTMLFormatter (void);
#if defined(__cplusplus)
} /* Make sure we have C-declarations in C++ programs */
#endif
#endif // Avoid multiple inclusion
/*************************** End of file ****************************/
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2021 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *
**********************************************************************
* *
* SEGGER SystemView * Real-time application analysis *
* *
**********************************************************************
* *
* All rights reserved. *
* *
* SEGGER strongly recommends to not make any changes *
* to or modify the source code of this software in order to stay *
* compatible with the SystemView and RTT protocol, and J-Link. *
* *
* Redistribution and use in source and binary forms, with or *
* without modification, are permitted provided that the following *
* condition is met: *
* *
* o Redistributions of source code must retain the above copyright *
* notice, this condition and the following disclaimer. *
* *
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND *
* CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, *
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF *
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE *
* DISCLAIMED. IN NO EVENT SHALL SEGGER Microcontroller BE LIABLE FOR *
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR *
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT *
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; *
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT *
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE *
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH *
* DAMAGE. *
* *
**********************************************************************
* *
* SystemView version: 3.30 *
* *
**********************************************************************
----------------------------------------------------------------------
File : SEGGER.h
Purpose : Global types etc & general purpose utility functions
Revision: $Rev: 18102 $
---------------------------END-OF-HEADER------------------------------
*/
#ifndef SEGGER_H // Guard against multiple inclusion
#define SEGGER_H
#include <stdarg.h> // For va_list.
#include "Global.h" // Type definitions: U8, U16, U32, I8, I16, I32
#if defined(__cplusplus)
extern "C" { /* Make sure we have C-declarations in C++ programs */
#endif
/*********************************************************************
*
* Keywords/specifiers
*
**********************************************************************
*/
#ifndef INLINE
#if (defined(__ICCARM__) || defined(__RX) || defined(__ICCRX__))
//
// Other known compilers.
//
#define INLINE inline
#else
#if (defined(_WIN32) && !defined(__clang__))
//
// Microsoft VC6 and newer.
// Force inlining without cost checking.
//
#define INLINE __forceinline
#elif defined(__GNUC__) || defined(__clang__)
//
// Force inlining with GCC + clang
//
#define INLINE inline __attribute__((always_inline))
#elif (defined(__CC_ARM))
//
// Force inlining with ARMCC (Keil)
//
#define INLINE __inline
#else
//
// Unknown compilers.
//
#define INLINE
#endif
#endif
#endif
/*********************************************************************
*
* Function-like macros
*
**********************************************************************
*/
#define SEGGER_COUNTOF(a) (sizeof((a))/sizeof((a)[0]))
#define SEGGER_MIN(a,b) (((a) < (b)) ? (a) : (b))
#define SEGGER_MAX(a,b) (((a) > (b)) ? (a) : (b))
#ifndef SEGGER_USE_PARA // Some compiler complain about unused parameters.
#define SEGGER_USE_PARA(Para) (void)Para // This works for most compilers.
#endif
#define SEGGER_ADDR2PTR(Type, Addr) (/*lint -e(923) -e(9078)*/((Type*)((PTR_ADDR)(Addr)))) // Allow cast from address to pointer.
#define SEGGER_PTR2ADDR(p) (/*lint -e(923) -e(9078)*/((PTR_ADDR)(p))) // Allow cast from pointer to address.
#define SEGGER_PTR2PTR(Type, p) (/*lint -e(740) -e(826) -e(9079) -e(9087)*/((Type*)(p))) // Allow cast from one pointer type to another (ignore different size).
#define SEGGER_PTR_DISTANCE(p0, p1) (SEGGER_PTR2ADDR(p0) - SEGGER_PTR2ADDR(p1))
/*********************************************************************
*
* Defines
*
**********************************************************************
*/
#define SEGGER_PRINTF_FLAG_ADJLEFT (1 << 0)
#define SEGGER_PRINTF_FLAG_SIGNFORCE (1 << 1)
#define SEGGER_PRINTF_FLAG_SIGNSPACE (1 << 2)
#define SEGGER_PRINTF_FLAG_PRECEED (1 << 3)
#define SEGGER_PRINTF_FLAG_ZEROPAD (1 << 4)
#define SEGGER_PRINTF_FLAG_NEGATIVE (1 << 5)
/*********************************************************************
*
* Types
*
**********************************************************************
*/
typedef struct {
char* pBuffer;
int BufferSize;
int Cnt;
} SEGGER_BUFFER_DESC;
typedef struct {
unsigned int CacheLineSize; // 0: No Cache. Most Systems such as ARM9 use a 32 bytes cache line size.
void (*pfDMB) (void); // Optional DMB function for Data Memory Barrier to make sure all memory operations are completed.
void (*pfClean) (void *p, unsigned long NumBytes); // Optional clean function for cached memory.
void (*pfInvalidate)(void *p, unsigned long NumBytes); // Optional invalidate function for cached memory.
} SEGGER_CACHE_CONFIG;
typedef struct SEGGER_SNPRINTF_CONTEXT_struct SEGGER_SNPRINTF_CONTEXT;
struct SEGGER_SNPRINTF_CONTEXT_struct {
void* pContext; // Application specific context.
SEGGER_BUFFER_DESC* pBufferDesc; // Buffer descriptor to use for output.
void (*pfFlush)(SEGGER_SNPRINTF_CONTEXT* pContext); // Callback executed once the buffer is full. Callback decides if the buffer gets cleared to store more or not.
};
typedef struct {
void (*pfStoreChar) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, char c);
int (*pfPrintUnsigned) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, U32 v, unsigned Base, char Flags, int Width, int Precision);
int (*pfPrintInt) (SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, I32 v, unsigned Base, char Flags, int Width, int Precision);
} SEGGER_PRINTF_API;
typedef void (*SEGGER_pFormatter)(SEGGER_BUFFER_DESC* pBufferDesc, SEGGER_SNPRINTF_CONTEXT* pContext, const SEGGER_PRINTF_API* pApi, va_list* pParamList, char Lead, int Width, int Precision);
typedef struct SEGGER_PRINTF_FORMATTER {
struct SEGGER_PRINTF_FORMATTER* pNext; // Pointer to next formatter.
SEGGER_pFormatter pfFormatter; // Formatter function.
char Specifier; // Format specifier.
} SEGGER_PRINTF_FORMATTER;
typedef struct {
U32 (*pfGetHPTimestamp)(void); // Mandatory, pfGetHPTimestamp
int (*pfGetUID) (U8 abUID[16]); // Optional, pfGetUID
} SEGGER_BSP_API;
/*********************************************************************
*
* Utility functions
*
**********************************************************************
*/
//
// Memory operations.
//
void SEGGER_ARM_memcpy(void* pDest, const void* pSrc, int NumBytes);
void SEGGER_memcpy (void* pDest, const void* pSrc, unsigned NumBytes);
void SEGGER_memxor (void* pDest, const void* pSrc, unsigned NumBytes);
//
// String functions.
//
int SEGGER_atoi (const char* s);
int SEGGER_isalnum (int c);
int SEGGER_isalpha (int c);
unsigned SEGGER_strlen (const char* s);
int SEGGER_tolower (int c);
int SEGGER_strcasecmp (const char* sText1, const char* sText2);
int SEGGER_strncasecmp(const char *sText1, const char *sText2, unsigned Count);
//
// Buffer/printf related.
//
void SEGGER_StoreChar (SEGGER_BUFFER_DESC* pBufferDesc, char c);
void SEGGER_PrintUnsigned(SEGGER_BUFFER_DESC* pBufferDesc, U32 v, unsigned Base, int Precision);
void SEGGER_PrintInt (SEGGER_BUFFER_DESC* pBufferDesc, I32 v, unsigned Base, int Precision);
int SEGGER_snprintf (char* pBuffer, int BufferSize, const char* sFormat, ...);
int SEGGER_vsnprintf (char* pBuffer, int BufferSize, const char* sFormat, va_list ParamList);
int SEGGER_vsnprintfEx (SEGGER_SNPRINTF_CONTEXT* pContext, const char* sFormat, va_list ParamList);
int SEGGER_PRINTF_AddFormatter (SEGGER_PRINTF_FORMATTER* pFormatter, SEGGER_pFormatter pfFormatter, char c);
void SEGGER_PRINTF_AddDoubleFormatter (void);
void SEGGER_PRINTF_AddIPFormatter (void);
void SEGGER_PRINTF_AddBLUEFormatter (void);
void SEGGER_PRINTF_AddCONNECTFormatter(void);
void SEGGER_PRINTF_AddSSLFormatter (void);
void SEGGER_PRINTF_AddSSHFormatter (void);
void SEGGER_PRINTF_AddHTMLFormatter (void);
//
// BSP abstraction API.
//
int SEGGER_BSP_GetUID (U8 abUID[16]);
int SEGGER_BSP_GetUID32(U32* pUID);
void SEGGER_BSP_SetAPI (const SEGGER_BSP_API* pAPI);
void SEGGER_BSP_SeedUID (void);
//
// Other API.
//
void SEGGER_VERSION_GetString(char acText[8], unsigned Version);
#if defined(__cplusplus)
} /* Make sure we have C-declarations in C++ programs */
#endif
#endif // Avoid multiple inclusion
/*************************** End of file ****************************/

File diff suppressed because it is too large Load Diff

@ -1,281 +1,418 @@
/*********************************************************************
* SEGGER Microcontroller GmbH *
* The Embedded Experts *
**********************************************************************
* *
* (c) 1995 - 2019 SEGGER Microcontroller GmbH *
* *
* www.segger.com Support: support@segger.com *
* *