esp-idf/components/soc
Angus Gratton 3e1a93e5a7 soc: rtc_vddsdio_get_config() In default configuration, VDD_SDIO LDO is always enabled
When using bootstrapping pin to enable VDD_SDIO, the internal LDO is always enabled at either 1.8V
or 3.3V.
2018-05-25 15:14:13 +10:00
..
esp32 soc: rtc_vddsdio_get_config() In default configuration, VDD_SDIO LDO is always enabled 2018-05-25 15:14:13 +10:00
include/soc Especially when internal memory fills up, some FreeRTOS structures (queues etc) get allocated in psram. These structures also contain a spinlock, which needs an atomic-compare-swap operation to work. The psram hardware, however, does not support this operation. As a workaround, this patch detects these spinlocks and will, instead of S32C1I, use equivalent C-code to simulate the behaviour, with an (internal) mux for atomicity. 2018-02-02 17:11:06 +08:00
test soc: add source code of rtc_clk, rtc_pm 2017-04-11 15:45:54 +08:00
component.mk Add initial SPI RAM support. This adds support for an ESP-PSRAM32 chip connected to the default flash pins and GPIO 16 and 17. The RAM is mapped to address 0x3F800000, but otherwise ignored by esp-idf as of yet. 2017-09-04 12:05:49 +08:00